Garis untuk kusen pintu (kusen) - CNC

MASTERWOOD + AMS Multitec + Teknomat 3000

Kondisi: diremajakan ulang (bekas), SCHLATTER MG24 Welded Wire Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Cross wire length: min. 900 mm Cross wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer longitudinal wires: 2,400 mm Mesh length (longitudinal wire length): max. 2,500 – 6,000 mm Minimum spacing between longitudinal wires: 100 mm Cross wire spacing: 25–250 mm Adjustable via cutting device (0–1) Longitudinal wire diameter: 4.0 – 12.0 mm Cross wire diameter: 4.0 – 12.0 mm Maximum number of longitudinal wires: 24 MG 24.1/8C MESH WELDING MACHINE – Basic configuration including: - 1 Machine base frame - 1 Upper support for reception of press units, continuously adjustable by handwheel Rsdpfx Ahjwu Tu Djwep - 1 Magnetic support unit with holding magnets and cross wire monitoring - 1 Row of pneumatic solenoid valves for operation of the press units - 1 Air and water installation - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front section: 25 – 250 mm, adjustable via cutting device (0–1) - 1 Feed trolley with panel lifting device - 1 Tool kit for machine adjustment WELDING SECTION including: 8 Type C transformers Rated power per transformer: 100 kVA Secondary open-circuit voltage: 7.1 V Rated secondary current: 14 kA 8 ES 130 thyristor contactors 12 Welding presses: 5.0 kN 12 Longitudinal wire current bridges for wire spacing: 50–100 mm 12 Longitudinal wire current bridges for staggered wires: 100 mm 10 Longitudinal wire current bridges for wire spacing: 100–150 mm 8 Longitudinal wire current bridges for staggered wires: 150 mm 6 Longitudinal wire current bridges for wire spacing: 150–200 mm 6 Longitudinal wire current bridges for staggered wires: 200 mm 24 Bottom copper electrode holders with standard angled electrodes, each with a water-cooled current cable, width: 58 mm 24 Wire clamping jaws Panel width: max. 2,500 mm Cross wire length: min. 900 mm Cross wire length with QF5 dispenser: min. 300 – 1,600 mm Max. spacing between outer longitudinal wires: 2,400 mm Mesh length (longitudinal wire length): max. 2,500 – 6,000 mm Min. spacing between longitudinal wires: 100 mm Cross wire spacing: 25–250 mm Longitudinal wire diameter: 4.0 – 12.0 mm Cross wire diameter: 4.0 – 12.0 mm Max. number of longitudinal wires: 24

Kondisi: sangat baik (bekas), Independent machine – universal machine (first & second position in a production line) Electronic control – EasyLing programmer Safe and soundproof enclosure No. 3+3 vertical columns for supporting the processing units Min. usable working width (mm): 240 Max. usable working width (mm): 3,100 Min. usable working thickness (mm): 3 Max. usable working thickness (mm): 150 Retractable positioning cams, spacing (mm): 800 Feed rate (min/max), infinitely variable (m/min): 4 – 24 Total power Rsdpjwhmdfefx Ahwep No. 4 processing units (for each side of the machine): Scoring unit Automatic scoring unit 1 x 3 kW (6,000 RPM) Planing unit 1 x 6 kW (6,000 RPM) 0–10° Universal milling unit (electropneumatically controlled) 1 x 6 kW (6,000 RPM) 0–90° Universal milling unit 1 x 6 kW (6,000 RPM) 0–90°

Kondisi: bekas, Tahun pembuatan: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery / l Weight: 286 kg Chicago Pneumatic CPVR15 CE Screw Compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in workshops, craft businesses, or industrial applications – this compressor provides reliable compressed air supply. Drive power: 3 kW Operating pressure: 7 bar Air flow: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air demand Rjdpfxsh A Sfds Ahwjp Scope of delivery: 1x Compressor – Chicago Pneumatic CPVR15 CE 1x Refrigeration dryer – OMI ESD 108 – 0.70 kW 1x Beko Öwamat 2 – oil-water separator Technical data taken from publicly available sources.

Kondisi: bekas, Tahun pembuatan: 2009, Maximum workpiece length: 4,500 mm Milling spindle: 1 unit Main motor: 20 kW Control: Siemens Weinig Conturex 2 C 114 ----- Working width: 40–260 mm Working height: 25–110 mm 2 x PowerGrip clamping table, 2 x 2,280 mm ----- Workpiece length: 200–4,500 mm Machining of workpieces over 2,700 mm in length is carried out via a follow-on/secondary cycle. Rsdpfjwunwyjx Ahwsp Main spindle 1: ----- Motor with brake: 20 kW HSK 63F Speed electronically adjustable: 2,000–18,000 rpm Max. tool length from reference plane HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of positions: 30 Slot pitch: 100 mm Multi-spindle drilling head, permanently installed ----- For horizontal and vertical drilling and milling operations without tool change ----- Price ex location Prices for dismantling and loading onto customer’s truck, domestic and international transport, reassembly, commissioning, and, if required, engineering of new profiles upon request! Including used tools (drawings available on request!): ----- Wood: IV 68, 78, 88, inward and outward opening, with attached weather bar Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 Lift-slide doors IV 68 and 78 Entrance doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical data according to manufacturer—no guarantee! Detailed technical description available on request!

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly checked prior to delivery Technical Data Summary (Please enquire regarding any additional included accessories) Pos. 1: Crosscut Saw ----- > Electronic, horizontally adjustable crosscut saw (stepless) > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut identification > NC length stop, mounted on slot table included Positioning of the crosscut saw integrated into the control system. > Length: 3500 mm Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Rjdpfxevu Hfqs Ahwjp Pos. 3: 1st Profiling Spindle (Climb and Conventional Milling) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool cutting circle: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially controlled pneumatically, 2 positions Sash bar guide consisting of: Guide rail at the fence (climb-milling spindle area), Sash bar support from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 5: Horizontal Top Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool cutting circle: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool cutting circle: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online capable > Rebating unit for tear-free rebating > Double part clamping kit > Return feed device for one-person operation: swivel belt > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC, PC control/NEXUS > Weinig type manufacturing program > Supplied without machining tools No original images yet available. Photos show a similar machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, We offer for sale a complete multi-point automatic steel wire welding line by SCHLATTER. We have three fully operational production lines available. Rsdpfx Ahstvpiljwep Automatic machines for the production of cross wires (so-called straightening and cutting machines) are also available. Additionally, we stock a range of single spot welders for steel wires.

Kondisi: baik (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: 94323, jarak pergerakan sumbu X: 3.060 mm, jarak lintasan sumbu Y: 1.260 mm, jarak gerak sumbu Z: 150 mm, tinggi total: 2.400 mm, panjang total: 4.400 mm, lebar total: 2.800 mm, berat keseluruhan: 3.130 kg, FOR SALE: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC Machining Center Rsdpfx Ahowpthtowep Fully operational, available for inspection in Wadowice Travel X: 3060 mm Travel Y: 1260 mm Travel Z: 150 mm Control type: CNC XP 600

Kondisi: sangat baik (bekas), Gold-anodised plates Rsdpfsu I N D Hex Ahwsp Working dimensions: 2.5 × 1.1 m Electric heating Fully operational, tested You can call or write to us. We can speak and write in German and Russian. You may also send messages in English. 31.3.5

Kondisi: baru, Tahun pembuatan: 2023, daya: 7 kW (9,52 hp), lebar perataan: 520 mm, jumlah bilah: 4, berat keseluruhan: 483 kg, jenis penyesuaian ketinggian: listrik, diameter poros mesin serut: 120 mm, tinggi penyerutan: 240 mm, SCM MiniMax S 52es Thickness Planer Specification: • Condition: New • Manufacturer: SCM • Thicknessing table width: 520 mm • Thicknessing table length: 850 mm • Minimum workpiece thickness: 3 mm • Maximum workpiece thickness: 240 mm • Maximum cutting depth: 5 mm • Motor power: 7 kW • Supply voltage: 400 V • Cutterblock with 4 traditional knives • Cutterblock diameter: 120 mm • Cutterblock rotation speed: 5,000 rpm • Maximum planing width: 520 mm • Feed speed: 5 / 8 / 12 / 18 m/min • Extraction port diameter: 120 mm • Net weight: approx. 493 kg • Overall dimensions: 144 x 108 x 110 cm (W x L x H) Additional information: • Factory-new machine • The presented photos show the actual condition of the item for sale • Possibility to start up and test the machine on site • The auction price does not include VAT or shipping costs Rsdpequ U Dnefx Ahwep • Available immediately from stock in Italy

Kondisi: bekas, nomor mesin/kendaraan: 4/14242, Frank floor sanding machine FSR used Motor power: 0.75 kW Voltage: 230 Volts 5 Amps, 50 Hz Machine no.: 4/14242 Dust bag included Redpfx Aheb Auu Rjwop Location: Ex stock Bitburg