Mesin pahat rantai, mesin pahat

MASTERWOOD OM340 5/22

Kondisi: baru, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Mindest-Arbeitslänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung, erste Einheit: 22 kW Motorleistung, zweite Einheit: 30 kW Motorleistung, dritte Einheit: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Arbeitsluftdruck: 0,55 MPa Bodod H Sc Espfx Aa Ujld Absaugleistung: 12.000 m³/h Transportmaße: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Kondisi: baru, Technical data: Working width: 1100 mm Abrasive belt size: 1120x2150 mm Max working height: 160 mm Blodpjgtm U Asfx Aa Ued Steel calibration roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Continuously adjustable feed belt speed: 4-20 m/min Work table lift motor power: 0.25 kW Pneumatic pad, lifting/lowering: YES

Kondisi: sangat baik (bekas), sliding table saw Robland 3200 Silver Line scoring unit with separate motor, carriage length: 320 cm main motor: 7 kW 3 spindle speeds max. blade diameter: 450 mm Bsdpfxjv S Hy As Aa Ueld blade tilt: 0–45° electrically adjustable with digital readout blade height adjustment: electric, without readout rip fence on the right, motorized adjustment up to 1240 mm digital readouts for the fence on the carriage angle cutting device included Brand-name machine in very good condition,

Kondisi: baru, Tahun pembuatan: 2026, Technical Data: • Extraction capacity ~ 5,200 m³/h • Motor power 3.0 kW • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction connection 250/200mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters 28 • Dimensions 752 x 1,982 x 2,144 mm • Weight 300 kg • Filter category G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: Bodpfx Ajd H Rf Tja Usld • Complies with H-2 standard • Polyester filters, 5 microns • 2 containers • Chassis • Filter cleaning via vibratory system with control panel + €850 for models with fire extinguisher (Safe System)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, en-GB Blsdpfjdqzcxjx Aa Uod

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Fully adjustable heads Electrically adjustable planing height and width Spindle diameter: 40 mm Bljdpsrigxysfx Aa Ujd Feed via cardan shaft rollers, stepless adjustment Robust planer by WEINIG Machine length: 415 cm The machine has been inspected and is in original condition

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw, Type: ZS 200 N – 5 kW Motor Includes machine stand, but without saw blade Machine can be tilted using handwheel and worm gear (at the rear) Saw blade diameter: 520 mm, blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled to one side to approx. 25° for acute angles and tilted left up to 30° for flat cuts Machine weight: approx. 250 kg Blsdsi Dfidepfx Aa Usd Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, minimax ti 55es LL - Spindle Moulder The image shows the T 55 i elite s standard version. The professional woodworking machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension cast iron spindle unit, tilting backwards up to -45°. Spindle speeds indicated by LEDs. Fast and simple speed change via eccentric clamping. Reversible spindle rotation (clockwise/counterclockwise). Height and tilt display with 0.1 mm accuracy. Heavy-duty professional fence: fine adjustment via rack-and-pinion, numerical display, aluminum fence jaws, 3-position adjustable for quick repeat settings. Scope of delivery: - Aluminum fence jaws - Curved milling guard - Table extension left and right Model: minimax ti 55es LL Item no.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table dimensions: -- Usable spindle length: 125 mm Blodpjdqzh Rofx Aa Uod Max. tool diameter: 240 mm Max. tool diameter (retractable): 230 mm Max. cutterhead diameter (tenoning): 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Kondisi: baru, Tahun pembuatan: 2025, Robust steel and grey cast iron construction With fixed milling spindle 3 spindle speeds from 3500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, oversized milling unit made of grey cast iron, mounted directly to the table With extraction hood beneath the worktable for improved dust extraction Solid and precise cast iron table Quick and effortless speed change Powerful 5.0 kW motor Standard arc milling guard Quality made in Italy Equipment details Grey cast iron milling unit Mounted directly to the milling table Milling spindle is mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life Bedpfehp Rcrox Aa Usld 3 milling speeds from 3500 to 10,000 rpm Powerful motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is factory-equipped for maximum safety with a height-adjustable guide rail and protective sheet Milling fence Precise milling fence with quick adjustment and fine adjustment with scale on the fence jaw Integrated extraction port ensures a clear view Milling table opening A large table opening allows the use of larger panel raising cutters as well as tenoning and slot mortising tools above and below the table Arc milling guard Included as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Weight (net) approx. 240kg Dust extraction connection Extraction port diameter: 2 x 120mm Worktable Worktable length: 1945mm — Table height: 900mm Worktable width: 695mm Setup information Required length: 1945mm — Machine body width/depth: 575mm Required width/depth: 920mm — Working area length: 1600mm Note on space requirement: Dimensions allow for max. travel distances or usable lengths. — Working area width/depth: 1600mm Machine body length: 1000mm — Note on working area: Please add the given working area dimensions to the space requirement to determine the recommended free setting-up area for the machine. Electrical data Mains voltage: 400V — Drive motor output: 5.0kW Mains frequency: 50Hz Milling spindle Usable spindle length: 100mm — Spindle speeds: 3500/7000/10,000 rpm Max. spindle protrusion above table: 130mm — Spindle diameter: 30mm Max. milling tool diameter Max. tool diameter (lowerable): 180mm SCOPE OF DELIVERY Arc milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Compact wide belt sander with combination sanding unit Special features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic controller Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning via pushbutton Article number: 5222100A2 Suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipped with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel at the front Robust monoblock steel machine frame with tubular reinforcement, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of working table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each processing unit Pneumatic belt tensioning per unit with decimal correction for grit/belt thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite covering Blodsgf Sw Nspfx Aa Ujd Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Dust extraction connection Extraction nozzle diameter 140 mm Electrical data Connection voltage 400 V Power type AC Phase(s) 3 Ph Network frequency 50 Hz Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Main drive motor power 7.5 kW Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm