Pusat pemesinan universal

Matec 30 HV

Kondisi: bekas, Tahun pembuatan: 2004, de-hu-it-lt-001 Fjdpoxx A Ncofx Aagopd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, en Fsdpsx D Rggsfx Aagspd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, de Fsdpsx D D D Ejfx Aagjpd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 50.106 h, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 800 mm, kecepatan spindel (maks.): 9.000 rpm, daya motor spindle: 16.000 W, jumlah sumbu: 4, This 4-axis vertical machining center, Matec 30 HV, was manufactured in 2012. It offers a generous X-axis travel of 3000 mm, a Y-axis travel of 800 mm, and a Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, reaching speeds up to 9000 rpm and a maximum table load of approximately 2500 kg. If you are looking for high-quality machining capabilities, you should consider the Matec 30 HV machine we have for sale. Please contact us for further details. • Z-axis travel: 800 mm (horizontal) • Z-axis travel: 700 mm (vertical) • Tilting swivel head with 1° indexing (Hirth coupling) • Swivel radius: 250 mm • Spindle power: 16 kW (40% duty cycle) • Spindle power: 11 kW (100% duty cycle) • Torque: 100 Nm (40% duty cycle) Fpjdpfx Aoyrqvlsagod • Voltage: 400 V • Installed power: 55 kW • Central lubrication system • Machine condition: fully operational • Operating hours: 50,106 h • Control unit: Rexroth IndraMotion MTX Additional Equipment • NC rotary table Ø800 mm (horizontal), maximum table load approx. 2500 kg • Internal coolant supply via the spindle (20 bar) • Paper band filter coolant unit with approx. 450 l tank • Electronic handwheel • 3D touch probe (Renishaw) • Work area lighting Technical Specification Taper size: SK 40

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 800 mm, sudut putar sumbu B (maks.): 105 °, sudut putar poros C (maks.): 360 °, This 5-axis milling-turning center, Matec 30 HV, was manufactured in 2010. It features a travelling column with an X-axis travel of 3,000 mm, a Y-axis travel of 600 mm, and a Z-axis travel of 800 mm. The B-axis swivels ±105°, and the C-axis can rotate 360°, allowing for the machining of complex geometries. Equipped with a Bosch Rexroth IndraMotion 10 control system, and a rotary table speed of 500 rpm, it enables precise turning and milling operations. For further information about this milling-turning center, please contact us. Additional equipment • Turning package: Enables high-precision turning operations in combination with standard milling, allowing for turning and milling in a single setup. Machine advantages Fodsx D Dy Hopfx Aagspd Qualitative advantages • 5-axis CNC machining center with travelling column, rotary table, and swivel head Technical advantages • Full 5-axis capability for complex workpiece geometries • The rotary table is equipped with a manual 3-jaw chuck ROTA S Plus 800 by Schunk. • There is no hardware runtime counter on the controller. Additional information Machine still powered up

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 14.136 h, jarak pergerakan sumbu X: 1.300 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 800 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC530, beban meja: 400 kg, kecepatan spindel (maks.): 15.000 rpm, daya motor spindle: 16.000 W, jumlah sumbu: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007 and is distinguished by its robust vertical machining center design. It is equipped with a Rexroth control system, a standard spindle with a speed range of 20–15,000 rpm, and a maximum torque of 100 Nm. The machine includes a tool changer with a capacity for 36 tools and a machine table capable of supporting up to 400 kg. If you are looking for a high-quality milling machine, you should consider the Matec MATEC 30 HV/K we are offering for sale. Please contact us for further information. Machine Advantages Fodpfx Aaox D Ix Tegjpd Qualitative Machine Advantages • The machine is from 2007 but was retrofitted in 2016. Technical Machine Advantages • Hard drive: 26 GB • Integrated network card • Max. torque: 100 Nm (40% duty cycle) • Temperature-controlled liquid cooling • Work area: fully enclosed with roof, bellows (steel lamella) • Installation: Height-adjustable leveling feet • The Matec HV 30 was overhauled in 2016 by the manufacturer Matec Maschinenbau Additional Information Cooling & Accessories Coolant: High-pressure coolant supply (20 bar, optionally 40 bar) Paper band filter (30 μm fineness) Tank capacity: 450 l Chip conveyor: Integrated scraper conveyor Oil mist extraction: Electrostatic filter (1,000 m³/h) Measuring & Safety Technology Direct measuring system: Linear encoders on all axes 3D measuring probe: Wireless transmission to the control system Tool monitoring: Laser-assisted tool breakage monitoring Tool length measurement (software) Optional Spindle (HSK 63-A): Higher performance: 30 kW / 190 Nm Drilling capacity (steel): up to 60 mm Milling performance: approx. 500 cm³/min Technical Specification Taper Size HSK 63

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 600 mm, jumlah sumbu: 5, Pusat pemesinan 3-sumbu Matec 30 HV ini diproduksi pada tahun 2013. Mesin ini memiliki panjang lintasan sumbu X yang mengesankan sebesar 2000 mm, lintasan sumbu Y 600 mm, dan lintasan sumbu Z 800 mm. Mesin ini menawarkan kapasitas penjepitan maksimum hingga 1200 kg dan kecepatan spindle maksimum 8.000 rpm. Jika Anda mencari solusi pemesinan berkualitas tinggi, pertimbangkan pusat pemesinan vertikal Matec 30 HV yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. Fsdpfjymm Exox Aagjpd • Sumbu Z H: 800 mm • Sumbu Z V: 700 mm • Diameter lingkar interferensi: 950 mm • Berat jepit maksimum: 1200 kg • Posisi alat: 48

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 21.990 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0903, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 1.100 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, Perjalanan sumbu 3000 x 800 x 1100 mm (X-Y-Z) Kontrol Heidenhain iTNC530 Handwheel Fodpfsyqx N Dox Aagspd 48 alat dalam rantai Spindel motor 12.000 rpm / 30 kW / 198 Nm Holder alat HSK63 Sistem pengukuran langsung di semua sumbu IKZ 20 bar dengan sistem filter sabuk, kapasitas 450 liter Meja putar NC tambahan untuk H/V, diameter 500 mm Probe pengukuran 3D Renishaw Probe tool Renishaw Spindel motor baru, ballscrew sumbu X baru, geometri disetel, perawatan besar dilakukan.

Kondisi: baik (bekas), Tahun pembuatan: 2007, jam operasional: 83.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.100 mm, produsen pengendali: Heidenhain, model controller: iTNC 530, jam operasional spindle: 32.800 h, spindel baru pada 08.2021 > jam spindel saat ini 5.577 jam handwheel slot alat 60 buah SK40 penyedot kabut oli pendingin internal (IKZ) spindel 12.000 rpm SK40 probe Renishaw Fjdpfx Aasyl Ut Uogopd Catatan: Kami menawarkan solusi pembiayaan yang fleksibel untuk semua mesin serta layanan pemindahan profesional. Pembongkaran, transportasi, dan pemasangan profesional – semuanya dari satu sumber. Penagihan berdasarkan syarat dan jangka waktu individu. Hubungi kami untuk penawaran pribadi Anda.

Kondisi: baik (bekas), Tahun pembuatan: 2009, jam operasional: 20.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.300 mm, Perlengkapan: konveyor serpihan, Kondisi baik, fungsi millturn dengan kepala spindle. Fsdpfx Aaoyl S Ntjgopd