Sistem pemanas, pemanas serpihan kayu

Mawera 470 kW (DEMONTIERT!)

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Bcodpew Sy T Hofx Ahwow Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: bekas, Technical Details: Welding current: 500 A Machine weight approx.: 128 kg Dimensions (L x W x H): 1.2 x 0.8 x 1.2 m Control unit: Display for welding current with 2/4-step switching, pulse mode, stepless adjustment Cooling system: water-cooled with antifreeze protection Bcsdjvz Abhepfx Ahwjw Shielding gas: solenoid valve without pressure regulator Torch package with 4.0 m length Torch head: gas-cooled Ground clamp with 4.7 m ground cable Wire feed: 4-roll drive with wire diameter for 1.0/1.2 mm

Kondisi: baru, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Mindest-Arbeitslänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung, erste Einheit: 22 kW Motorleistung, zweite Einheit: 30 kW Bodpfx Ajd H Sc Eohwscw Motorleistung, dritte Einheit: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Arbeitsluftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Processing center Rover 20 Bcjdpelc Dwnefx Ahwew Working area: 2,893 x 950 mm, milling spindle with ISO30 tool holder, 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-position tool changer. The NC410 control featured a floppy disk drive and a color monitor, as well as basic, graphically assisted programming options. Additionally, the Rover 20 already enabled pendulum (dual-zone) machining. Dimensions: approx. 3,800 x 2,000 mm, height 1,600 mm Control cabinet: 950 x 700 x 1,300 mm Ex site

Kondisi: bekas, Tahun pembuatan: 2000, unimat23e_spec Bcedjwztw Sjpfx Ahwsw

Kondisi: baru, Tahun pembuatan: 2024, ♻ Universal application (wood, pallets including nails and staples, wood fibre boards and remnants, veneers, MDF boards, plastic, etc.) ✔ Motor power: 18.5 kW ✔ Rotor length: 870 mm Bsdpohzlr Isfx Ahwscw ✔ Rotor diameter: 270 mm ✔ Rotor speed: 80–120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10–50 mm ✔ Capacity: up to 7 m³/h* ✔ Extraction port: 200 mm ✔ Feed opening: 1,446 x 1,565 mm ✔ Dimensions (L/W/H): 2.15 / 1.97 / 2.04 m ✔ Weight: 2,050 kg 2-year warranty or 2,000 operating hours

Kondisi: bekas, Tahun pembuatan: 1993, Häwa mesin pengupas kayu dengan kepala frais H249 / 1000 Tahun pembuatan 1993 Diameter batang 0,25 m - 1,2 m Bcedpfx Ahsx Rv T Iswjw Panjang batang 1,8 m - 7 m Kepala frais 30 kW Reduser akar 37 kW Terdiri dari: Konveyor melintang untuk input Pengupasan kulit kayu Sabuk konveyor Konveyor pengeluaran

Kondisi: baru, 1,690€ + 22% Italian VAT. A net invoice will be issued for customers with a valid VAT ID. ----- The Brugger Power Split S14 is a powerful vertical log splitter boasting a splitting force of 14 tons. This robust machine is ideally suited for a wide range of applications and offers maximum flexibility in terms of power source – through either the 3.7 kW electric motor or the PTO drive. Key features: - 14T splitting force - Combined drive: 3.7 kW electric motor & PTO drive - Weight: 250 kg - For log lengths up to 110 cm Bedpfjxn Iq Rjx Ahwocw - Log lifter A log lifter is included in the standard scope of delivery, making it much easier to handle heavy logs. An optional hydraulic winch is available, providing additional versatility and further simplifying work processes. With a maximum splitting length of 110 cm, the Brugger Power Split S14 allows you to process larger logs effortlessly. A support table for processing shorter logs is also available. The Brugger Power Split S14 is the ideal choice for anyone looking for a reliable and powerful wood splitting solution, both for professional and private use. Prices + VAT: Power Split S14 = €1,690 Power Split S22 = €2,670 Power Split S30 = €2,960 Accessories: Support table for short timber = €125 4-way splitting wedge = €99 Hydraulic winch = €595 ----- Contact us for your tailor-made quote!

Kondisi: bekas, Brewhouse with a cast wort capacity of 20 hl, comprising the following components: Bcsdpowgc Udsfx Ahwjw 1. Milling system (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hopper, floor scale, grist transport, and control cabinet 2. 3-vessel compact brewhouse with insulated stainless steel vessels featuring copper covers, spindle station, and control cabinet 3. Fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tanks (Joh. Albrecht, 1999, 44 hl, 0.99 bar), and 6 x storage tanks (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4. Bright beer tank cellar with 2 x bright beer tanks (Speidel, 2021, 86 hl, 3 bar), 1 x bright beer tank (INOX, 2018, 67 hl, 3 bar), and 4 x bright beer tanks (Joh. Albrecht, 1999, 12 hl, 2.5 bar). All tanks with jacket cooling. 5. Keg cleaning and filling system (BTB Multimat MT/2, 1997, 17–20 kegs/h) 6. Chiller unit as ice water generator (Joh. Albrecht, 1999, cooling capacity 14.5 kW) 7. Steam generator with soft water system (Jumag, 2000, 224 kg/h steam, oil-fired) 8. 40 hl hot water tank (Joh. Albrecht, 1999), heatable, with control cabinet Need only part of the system? This unit is offered on a brokerage basis. Partial sale may be possible—just contact us and submit your offer. Machine (additional info): Cast wort capacity 20 hl, years built 1997–2021 Cast wort capacity: 20 hl Features: Milling system; 3-vessel compact brewhouse; fermentation vats; fermentation, storage and bright beer tanks; keg system; chiller unit; steam generator; hot water tank; CO2 liquid gas tank.

Tahun pembuatan: 2013, Kondisi: sangat baik (bekas), Gas burner Weishaupt WM-G10/3-A\nWe have 8 units in stock\nOutput: 630 kW – 1,200 kW\n\n2x Year: 2007 WMG10/3-A\n2x Year: 2010 WMG10/3-A\n1x Year: 2011 WMG10/2-A\n1x Year: 2011 WMG10/4-A\n1x Year: 2009 WMG10/3-A\n1x Year: 2013 WMG10/3-A\n\nWe speak Russian!\n\nViewing by prior telephone arrangement only!\nPreferably sold to dealers, tradespeople, or for export.\nAll information without guarantee. Subject to error and prior sale.\nThe seller assumes no liability for typographical or data transmission errors.\n\nWe are happy to purchase your used boiler or burner!\n\nOf course, we also handle all formalities.\n\nLoading possible. Bcodpfxsi Atp Sj Ahwsw