Mesin bor meja berkinerja tinggi

MAXION BT 18

Kondisi: baru, High-performance thread tapping machine with leadscrew setup. Safety device against tool breakage. Programs for single-cycle and continuous operation, programmable thread depth, piece counter, LED lamp, and electronically controlled motor braking for single-cycle mode. Simple leadscrew change via quick-release coupling. Standard drilling capacity: 15 mm Thread cutting capacity: M3 - M10 Threads per hour: 1,000 Spindle: MK 2 Thread depth: 60 mm Drilling depth: 100 mm Throat: 250 mm Lajdpfx Aaofrlndehjk Distance spindle/table: 185 to 541 mm Table size: 340 x 445 mm T-slot width: 12 mm Column diameter: 90 mm Overall height: 1,050 mm Weight: 120 kg Special motor: 0.55 kW Mains connection: 400 V/50 Hz BT 18 GL M00033 4 spindle speeds: 320 rpm / 560 rpm / 1,000 rpm / 1,600 rpm Also available as pillar drilling machine BS 18 GL (M00034)! Digital speed display as standard. Column 200 mm longer: 14154

Kondisi: bekas, Tahun pembuatan: 2010, Maximum turning diameter: 410 mm Turning length: 1,235 mm Control: IT / Turn Plus Heidenhain Swing diameter over bed: 700 mm Main spindle speed range: max. 4,000 rpm Main spindle drive power: 35 / 45 kW Max. torque: 770 Nm Lodjvzhiwopfx Aaheak Spindle nose: 220 h5 Spindle diameter at front bearing: 160 mm Max. usable bar diameter: 95 / 104 mm C-axis: 0.001° Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range of driven tool stations: max. 4,000 rpm Drive power driven tool stations: 12 kW Max. torque driven tools: 36 Nm Tool holder: VDI 40 DIN 69880 Turret indexing time (30°): 0.4 sec Y-axis: 120 (+/- 60) mm X-axis: 300 mm Z-axis: 1,300 mm Y-axis: +/- 60 mm Tailstock travel: 1,200 mm Tailstock taper: MK 5 Clamping pressure: 1,400 daN Rapid traverse (X / Y / Z): 30 / 22.5 / 30 m/min Total power requirement: 60 kVA Machine weight: approx. 7.7 t Space requirement: approx. 6.0 x 3.5 x 2.5 m CNC Turning and Milling Center GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Driven tools - Direct measuring system - Bar machining package - Interface for bar feeder / bar loading magazine

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1995, nomor mesin/kendaraan: 956158, jenis kontrol: manual, jumlah rol: 3, diameter poros: 75 mm, berat keseluruhan: 1.300 kg, panjang total: 1.000 mm, lebar total: 1.130 mm, tinggi total: 1.100 mm, daya: 4 kW (5,44 hp), tegangan masuk: 380 V, We can offer you a ROUNDO (Sweden) electro-hydraulic section bending machine Model: R-3 Capacity: 14 cm³ Machine no.: 956158 Delivered to agent: 10-1995 Delivered to customer: 26-7-1996 Dimensions: 1 x 1.13 x 1.1 m Weight: 1,300 kg Shaft diameter: Ø 75 mm Motor power: 4 kW - Hydraulic machine - Can operate in horizontal or vertical position - 3 driven rolls Including: - Brake motor - Push-button control - Digital display - 1 extra set of rolls for tube Ø 48 and Ø 42 mm - Dutch-language manual Price of the ROUNDO section bending machine, model R-3: upon request via email The machine retains its original paint and has seen very little use! Laedpfx Asxl Sq Asahsk Terms of delivery: Delivery time: ex-stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that deals in and stocks mainly used Kardex Remstar VLM automatic lift (shuttle systems) & rotary storage systems (paternoster systems). Visit our website for our current stock. We assemble and/or dismantle these systems safely with VCA-certified technicians, and have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Cutting diameter: 150 mm Minimum cutting range: 150 mm Saw blade diameter: 400 mm Minimum cut-off length: 420 mm Maximum cut-off length: 4000 mm Space required: approx. 4800 x 1100 x 1500 mm Lasdsvwgnwjpfx Aahek The double miter saw is in very good condition and has seen very little use.

Kondisi: siap digunakan (bekas), A compact sweeper Hako with 2 disc brushes and central suction is available. Axle loads front/rear: 1200kg/1500kg, turning radius: 1390mm, engine: Yanmar 3TNV88C, power: 25.5kW, displacement: 1642cm³, cylinders: 3, emission stage: V, fuel capacity: 41l, travel speed forward/reverse: 25km/h/12km/h, operating hours: 97.6h. Machine dimensions L/W/H: approx. 3150mm/2000mm/1100mm, weight: approx. 2200kg. Documentation available. On-site inspection possible. Lasdpswaa Hqsfx Aahsk

Kondisi: bekas, hydraulische-tafelschere-steiner-hts30-20r Lasdpfsd Hxx Asx Aahsk

Kondisi: baru, Bending: 13.0 mm; Sheet length: 3100 mm; Sheet thickness: 16.0 mm; Total connected load: 17.5 kW; Weight approx.: 11.6 t; Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roller diameter Pre-bending: 13.0 mm Lsdpfx Asd Auacjaheak » at 1.5x top roller diameter Top roller diameter: 300 mm Bottom roller diameter: 270 mm Side roller diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of top and bottom rollers via planetary gearbox • Digital display for side roller positions • Hydraulic drop-end bearing • Cone bending device • Hardened rollers • Hydraulic adjustment of side rollers, synchronized via PLC • Hydraulic adjustment of bottom roller via torsion bar • Pressure-adjustable bottom roller • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Important notes for cone rolling: • The max. sheet thickness is 50% of nominal capacity • The cone length may be max. 30% or must be more than 60% of the roller length • Hardened rollers are recommended

Kondisi: sangat baik (bekas), Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 100 mm Grinding wheel diameter: 360 mm Total power requirement: kW Machine weight approx. 3.8 t Space requirement approx. 3.5 x 1.3 x 1.5 m Laedpfx Asunt Eysahjk Machine in very good condition! External and internal spindle. Extensive accessories included.

Tahun pembuatan: 1970, Kondisi: belum diuji (bekas), Here we offer a balancing machine from Trebel. The machine is equipped with a robust steel safety cover. Offered for refurbishment, as the control cabinet is missing! Technical data: Manufacturer: Trebel Type: FC4c-xn Year of manufacture: 1970/74 Standard weight range up to 400 kg Laodpfxshikdws Aahsk Maximum permissible load per block: 200 kg

Kondisi: baik (bekas), Automatic ROPP-afsluitmachine Fabrikant: Bertolaso Type: Automatische ROPP (diefstalveilig) afsluitmachine Model: Alfa 110-VH40 Capaciteit: Tot 2.000 doppen/uur Afmetingen: L x B x H = 1.800 x 800 x 1.800 mm Lsdeg Dvfwepfx Aahsak Elektrisch: 380 Volt – 50 Hz Gereedschappen: Naar keuze klant Kenmerken: Inclusief dopsortering In huidige staat of aangepast aan klantspecificaties