Beli mesin frais rantai bekas (24)

Kondisi: baik (bekas), Tahun pembuatan: 1986, Hoffmann Dübelfix chain mortiser with pneumatic lift - very good condition - Pneumatic clamp Hodpfx Adjvk Dqvjqofn Turret stop Material support Pneumatic foot pedal Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baik (bekas), Ketten- und Schlössfräsmaschine für sämtliche Arten von Schlossausfräsungen an Holztüren, Fensterrahmen, Möbeln, Regalen – CE-Standard Hjdpfx Adjwd Rwbeqjfn Aggregat mit 2 waagerechten Fräsern zur gleichzeitigen Ausführung von Schlüsselloch- und Drückerlochfräsungen Maximale Frästiefe: 150 mm Maximale Fräslänge: 330 mm Querverfahrweg: 80 mm Maximale Arbeitshöhe für Türen: 1000 mm Vertikaler Tischhub: 250 mm Fräsmaschinen-Motorleistung: 3 kW Vertikale Einheiten-Motorleistung: 0,55 kW Horizontale Einheiten-Motorleistung: 1,84 kW Absaugstutzen-Durchmesser: 120 mm Gesamtmaße (L x B x H): 1400 x 950 x 2100 mm Gewicht: 850 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin Bor Rantai/Chain Mortiser KF20, dengan beberapa rantai, kondisi sangat baik, 1,7 kW, 380 Volt. Mesin dikenakan pajak diferensial. Hjdpfjxf Hzisx Adqefn

Kondisi: bekas, Tahun pembuatan: 1980, Mesin bekas Kondisi: berbagai kerusakan kecil Hfedpfx Adjw I U Nhjqon tanpa rantai Perlengkapan dan data teknis: Angkat Kiri/Kanan: 150 mm, Angkat Atas/Bawah: 150 mm Motor: 1,5 kW Dapat digunakan sebagai donor suku cadang Ketersediaan: segera Lokasi: Flörsheim

Kondisi: bekas, fi Hjdpfewzkgksx Adqsfn

Kondisi: baik (bekas), Chain mortiser, chain router, lock case router, lock case mortiser -Manufacturer: Festo, chain mortiser type PP on transport frame -Motor power: 1.6 kW -Connection: 380 Volt -Accessories: incl. see photo -Overall dimensions: 800/700/H1600 mm Hedpfx Adeh Nvy Nsqsfn -Weight: 232 kg

Kondisi: bekas, Swiveling door lock mortiser, lock case mortiser, or chain mortiser Bäuerle as wall-mounted model for milling slots in door leaves or similar components. Motor: 1.6 kW Hfjdewrd Tfjpfx Adqsn Bar length: 175 mm Chain width: 18-25 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994, Chain Mortiser / Chain Router with Push Drilling Unit A complete lock case can be milled/drilled within 30 seconds. No reclamping required for the entire process. Quick changeover from left- to right-hand doors. Can also be used as a standard chain mortiser. 3 motors. Motor power: 1 x 2.2 kW & 2 x 0.5 kW, 400 V, 50 Hz Mortising length: 320 mm Hodpfx Asul U Iwedqsfn Mortising depth: 150 mm Mortising width: 6 – 40 mm Door thickness: 40 – 80 mm Door width: 400 – 1050 mm Weight: 192 kg Including clamping device Oil lubrication system 1 stop drum 2 side stops, 1500 mm Includes various spare drill bits Includes spare chain Includes all documentation

Kondisi: sangat baik (bekas), Door lock mortising machine SL100 With milling motors for faceplate and handle. Hfjdpfx Adju R Il Ujqjn

Kondisi: bekas, penggali rantai bekas model lama versi standar Ketersediaan: segera Hodow Nab Eepfx Adqefn Lokasi penyimpanan: NRW

Kondisi: siap digunakan (bekas), Stand chain milling machine with various milling heads Hfsdpeu Imzvefx Adqsn

Kondisi: bekas, including 7 chain sets pneumatic air suspension used, excellent condition, with many accessories Make: Wigo Hfodpfx Adevvnmleqen Pillar-type machine 7 chain sets Door support tiltable and swiveling workpiece support for wedge-shaped/conical holes Extraction port, diameter 60 mm Space requirement approx. 1100 mm x 700 mm x 2000 mm Weight approx. 350 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Handover in as-inspected condition Sold without any warranty or guarantee

Kondisi: bekas, Chain width: 17 mm Motor: 2.2 kW Swivel range: ±45° Hedotunbujpfx Adqefn Table tilt: ±45° Further data: See PDF Lock mortiser, door lock mortiser, also known as chain mortiser / chain chiseler Framar type MC 60, suitable for simultaneous mortising of lock cases and drilling door holes in doors and windows, as well as for many other applications. Chain width: 17 mm Motor: 2.2 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Chain mortising machine with additional unit consisting of two horizontal milling cutters for the production of handle and keyholes, and two adjustable, motorized, swiveling drilling units for slotting operations. Hjdpfx Aolpcffodqofn Vertical working unit: - Maximum workpiece thickness: 230 mm - Maximum workpiece height: 710/1050 mm - Vertical stroke: 150 mm - Horizontal stroke: 300 mm - Traverse head stroke: 80 mm - Head tilt: +/- 45 degrees - Vertical spindle stroke: 250 mm - Unit tiltable +/- 45 degrees - Motor power: 2.2 kW, 400V, 50 Hz Horizontal working unit: - Number of drilling units: 2 - Min./Max. longitudinal stroke: 80 / 130 mm - Manual travel: 140 mm - Pneumatic cross-travel: 140 mm - Drill motor power: 0.18 kW, 400V, 50 Hz - Router motor: 1.8 kW, 400V, 50 Hz Weight: approx. 650 kg Including pump for automatic chain lubrication Including tools Including manual Note on used machines: • Technical data subject to errors and prior sale. • The prices stated are ex location – loaded for collection! • The machines have been cleaned and function-tested. • All machines are sold as seen with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered if you include your address and telephone number!)

Kondisi: baik (bekas), Technical data: Motor: 1.5 kW Three-phase voltage: 220/380 V / 50 Hz Speed: 2800 rpm Max. mortising depth: 150 mm Max. slot length: approx. 170 mm Max. chain width: 40 mm Max. longitudinal table travel: 160 mm Max. cross table travel: 90 mm Tilting angle: 5 degrees Machine weight: 72 kg Stand weight: 35 kg Approx. dimensions (HxWxL): 190 x 54 x 60 cm Hedpfx Ajwm Dlksdqofn

Kondisi: bekas, From school use Used, excellent condition, low hours of operation Manufacturer: Haffner Model: KF 20 Machine no.: 21961 Stationary machine Chain set: 40 x 150 x 6 Door support Workpiece support Lubrication unit Mechanical workpiece clamping Mobile (on wheels) Weight approx. 100 kg Location: 97447 Gerolzhofen, free loaded, unpacked Hodpfsvxa I Tsx Adqsfn Transfer in as-is condition as inspected, without warranty or guarantee

Kondisi: bekas, Bar: 40 x 175 mm Chain width: 15 mm Swiveling: for keyhole slots Further technical data: see PDF Hjdjlfdvyepfx Adqjfn Chain mortiser or chain milling machine Fezer KF 50 for cutting mortise joints.

Kondisi: bekas, Used, good condition, low operating hours Manufacturer: Haffner Model: KF 20 Column-type machine Hodevwgayjpfx Adqsfn Chain set: 40 x 150 mm Workpiece support Lubrication device 1 x mechanical workpiece clamping Space requirement (LxWxH): approx. 600 x 800 x 2000 mm Total connected load: 1.7 kW Location: 97447 Gerolzhofen Sale as-is, as inspected - loaded free of charge -

Kondisi: bekas, Guide bar: 40 x 150 mm Chain width: approx. 18-15 mm Motor: 1.6 kW Bäuerle chain mortiser / chain chisel machine for mortising lock cases or other fittings, equipped with a tilting table and swiveling milling unit. Hjdslfdx Ropfx Adqjfn

Kondisi: bekas, Door lock mortising machine Used, good condition Manufacturer: Haffner Model: SL 100 Hfsdpfx Ajvwfv Tsdqjn Pillar-type machine Chain assembly: 12 - 17 / 50 x 150 mm Workpiece support Handle hole motor Faceplate motor Lubrication unit Mechanical workpiece clamping Required space approx. LxWxH mm: 1500 x 900 x 2010 Location: 97447 Gerolzhofen Handover in as-is condition as inspected - Free loaded -

Kondisi: bekas, Door lock mortising machine Used, good condition Manufacturer: Haffner Model: SL 100 Hfodpfsvwfmfox Adqsn Machine No.: 2269 Column-type machine Chain assembly Door support Workpiece support Spindle lock motor Faceplate motor Lubrication device Extraction port diameter: 80 / 100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without any warranty or guarantee

Kondisi: bekas, With swiveling mortising unit +/- 90° and tiltable support incl. numerous chain assemblies Used, in excellent condition Make: Bäuerle Wall-mounted machine Hsdjvwfhvepfx Adqsfn Chain assembly 12-17 50 x 175 Milling unit rotatable +90° / -90° Space requirement approx. 800 mm x 1000 mm x 1300 mm Weight approx. 300 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, without warranty or guarantee

Kondisi: bekas, used Manufacturer: Haffner Model: KF20 Wall-mounted machine Workpiece support Lubrication unit Total connected load: 1.5 kW Location: 97447 Gerolzhofen Sale as seen, in current condition. No repair work included. Prompt collection possible. Hedpfxsvwf T Ee Adqsfn - loaded free of charge -

Kondisi: bekas, Cleaned, function-tested, trial run with rebated motor Used Manufacturer: Festo Type: KF Pillar-type machine Door support Hfedpfx Aovwfr Uedqen Rebated motor (Stulpmotor) Extraction connection, diameter 50 mm Required space approx. LxWxH (mm): 1200 x 800 x 2000 Weight approx. 200 kg Total connected load: 1 kW Location: 97447 Gerolzhofen Handover in as-is condition as inspected - free on loaded truck -