Gergaji pemisah panel

Mayer

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 1.020 h, Fungsionalitas: berfungsi sepenuhnya, offer-Holzher-Nextec-7707-EN Ljdpfxswtiq Ss Aahehr

Tahun pembuatan: 2023, Kondisi: baru, In the field of 3D thermoforming, we also offer presses, turners, film storage paternosters, and brushing machines on Machineseeker! MEMBRANES for membrane presses – made of silicone or natural rubber Top quality and suitable for every membrane press (for film and veneer pressing). You can purchase our membranes pre-cut to your required dimensions or as roll goods. SILICONE Type: MS-2 Color: milky white Surface: fabric-patterned/smooth Standard widths: 1680/2000 mm Polymer base: silicone Shore/hardness: 50° Shore Thickness: 3 mm Operating temperature: min. -50°C / max. 200°C SILICONE Type: MS-1 Color: milky blue Surface: smooth Standard widths: 1600/1800 mm Polymer base: silicone Shore/hardness: 45° +/- 3° Shore Thickness: 2 mm Operating temperature: min. -60°C / max. +230°C NATURAL RUBBER Type: MNK-2 Color: grey Surface: smooth/fabric-patterned Standard widths: 1700–1750 and 2000 mm Rubber: natural rubber Shore/hardness: approx. 42° Shore Thickness: 2.5 – 4.0 – 5.0 mm Operating temperature: min. -20°C / max. +130°C NATURAL RUBBER Two-layer version for waterbed/oil presses Type: MNK-2 WB Color: grey/black Surface: both sides smooth Standard width: 1700 mm Rubber: natural rubber Shore/hardness: approx. 42° / 60° Shore Thickness: 3.5 – 4 mm Operating temperature: max. 130°C Standard SILICONE Type: RSS Color: red-brown or transparent (other colors on request) Surface: both sides smooth Standard length: cut to size or 10 m roll (other lengths on request) Standard width: 1200 mm – up to 1800 mm on request Lodpfxsd S Efas Aahehr Polymer: silicone Shore/hardness: 30° – 80° Shore Thickness: 0.5 – 10 mm

Tahun pembuatan: 1993, Kondisi: bekas, • Working width (mm): 2200 • Motor power (kW): 22 • Upper rollers: with PU rings Lhjdpfx Asn I Twyeahjr • Lower rollers: corded • Saw shaft: included

Kondisi: bekas, Tahun pembuatan: 2019, Numerical control with WINCUT software Barcode label printer Cutting length mm: 4300 Cutting width mm: 4300 Blade projection: 110 mm Double side alignment device with pneumatic rubber cylinder No. 1 fixed front Bakelite table with air cushion system and side guide for loading/unloading panels Lhodpfx Aewcdymjahor No. 3 adjustable front Bakelite tables with air cushion system for loading and unloading panels Engraving unit (max. blade diameter / power) Main saw unit (max. blade diameter / power): 20 HP (15 kW) Optimized blade/press plate lifting in self-learning mode Electronic adjustment of the engraver Adjustable saw carriage speed m/min: 150 - 170 Push carriage speed m/min: 0-90 Push carriage with 7 clamps TECHNICAL DETAILS TO BE VERIFIED

Kondisi: bekas, Tahun pembuatan: 2001, Lebar potong: 3300 mm Panjang potong: 3350 mm Berat: sekitar 4000 kg Tonjolan mata gergaji: 100-(115) mm Gerobak gergaji: Kecepatan maju: 1–100-(1–130) m/menit. Kecepatan balik: 100-(130) m/menit. Mata gergaji utama: 400-(430) mm Motor: 7,5 - (11–13,2) kW Scriber: 215 mm Motor: 2,2 kW Penekan: Gerak cepat: 1–60 m/menit. Balik: 60 m/menit. Ekstraksi: Kecepatan udara: 30–35 m/detik. Konektor ekstraksi: 200 mm / 115 mm Udara tekan: Tekanan: 5–6 bar Konsumsi: 20–30 l/menit. Lokasi penyimpanan: Nattheim Lsdpfx Aovvkqgjahehr

Kondisi: bekas, Tahun pembuatan: 2011, Numerical WINCUT control Working dimensions (mm): 3800 x 3800 Max. blade projection (mm): 107 Front panel loading: No. 10 clamps on the pusher carriage Side aligner Scoring unit (max. blade diameter / power): 160 mm / 1.5 kW Main saw unit (max. blade diameter / power): 380 mm / 7.5 kW Adjustable saw carriage speed (m/min): 1 - 135 Pusher carriage speed: 70 m/min No. 3 air flotation front tables TECHNICAL DATA TO BE VERIFIED WHEN THE MACHINE IS IN OUR WAREHOUSE Ljdpfx Aswwrywjahshr

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, SCHEER FM 16 Panel Saw System – DNC 3100 x 3100 As-new condition – Machine No. 33542 The SCHEER FM 16 is a high-performance, electronically controlled panel saw featuring state-of-the-art drive technology and an intuitive control system. The machine has been completely overhauled and newly painted – its condition is virtually as-new. Ideally suited for precise, automated cutting of wood-based panels in continuous industrial operation. Lhsdjunwk Tjpfx Aahor Key technical data: Cutting length: 3,100 mm Saw depth / blade projection: 80 mm Main saw motor: 7.0 kW Scoring saw motor: 1.1 kW (can be switched on/off) Feed speed: 2 – 40 m/min (infinitely variable) Return: Rapid traverse, automatic lowering Operator interface: SCHEERWIN, graphical, document-oriented (64-bit), running on Windows 10 Drive system: Küenle inverter with Stöber synchronous servo drives incl. absolute encoders – for highest positioning accuracy and dynamic control Features & equipment: Longitudinal panel saw FM 16-3100 with hardened guides and automatic forward/reverse Material feed table HP 5021 with 6 clamp grippers, servo drive & measuring accuracy of 0.05 mm Automatic angle pressure device WP, adjustment range 2,400 mm Off-cut device SP 5000 for minimum off-cuts as small as 5 mm Angle stop table HP 5024 (1,800 x 800 mm), steel angle with Pertinax surface Workpiece support table HP 5025 (1,800 x 800 mm), also with Pertinax surface Air cushion system in the front tables incl. radial fan Saw blades included: KSB 4005 for main saw (305 mm dia., Z = 60) KSB 4006 for scoring saw (200 mm dia.) Condition & Service: Condition: Factory reconditioned & as-new Functionality: Fully operational Warranty: 12 months Reliability in intensive use: This machine operates reliably worldwide—even under extreme conditions. Whether in Africa’s dry climate or in high humidity environments in Southeast Asia (e.g., Thailand), the SCHEER FM 16 runs flawlessly in 3-shift systems—365 days a year—and impresses with its exceptional precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excluding electrical supplied parts and consumables.) Flexibility & customization: We offer various models and configurations for every budget. Custom solutions tailored to your individual requirements are also available. 📞 Contact us for a personalized offer or to schedule a viewing. Machine available ex stock. Delivery, commissioning, and training available as options.

Kondisi: bekas, Tahun pembuatan: 2016, Angle plate saw with automatic pre-tensioning and double pusher system for optimized cutting Osi Plus numerical control Os Labeling labeling machine with onboard graphic labeling of the parts with illustrations Software for label print management Lhjdpfx Aasuc Idxohsr Optiplanning cutting optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade protrusion: 95 mm Motorized rollers for side loading onto lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of throwaway panel (sacrificial panel) based on thickness specified in the machine data Low stack stop Automatic side loading. Includes: safety grids, double photo cell, push-button control panel, electrical pre-installation for the two motorized pre-roller conveyors, and reinforcement with 4 rollers instead of fork passages in the pre-roller conveyor Intermediate roller conveyor Side feed pre-roller conveyor, dimensions 3800 x 2200 mm, with motorized rollers (height from floor: 325 mm) Gravity conveyor for feeding longitudinal offcuts to corner systems, 4500 mm (total length: 7295 mm) 3000 mm extension of the gravity conveyor for also conveying cross-cut offcuts Long chute for manual transfer of cross-cut section to central gravity conveyor Air cushion outfeed table, 2050 x 850 mm, fitted with front wheels Air generator for up to 6 air cushion levels MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows the minimum panel length required for cross-cutting to be reduced from 1830 mm to 1220 mm. Automatic device for detecting saw spindle deflection in angular installations (longitudinal and transverse), consisting of a sensor that detects deflection directly on the saw shaft and a device that detects the blade revolutions directly at the chuck. Remote cycle start panel Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main saw blade, max. diameter mm, 15 KW Scoring blade, max. diameter mm, 2.2 KW Saw carriage speed 1-140 m/min – brushless motors Longitudinal pusher carriage speed 90 m/min Cross pusher carriage speed 135 m/min Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed grippers + 2 on the cross carriage, multi-pusher system) Cutting system for thin panels

Kondisi: baru, Tahun pembuatan: 2025, Martin Dickenhobelmaschine T 45 with Tersa Cutterhead Accessories: 7.5 kW The T45 thickness planer offers ideal conditions for modern production. It produces smoothly planed surfaces, is quick and easy to operate, and also works extremely quietly. The standard electronic control makes setting the planing height effortless thanks to 99 storable planing dimensions—your first workpiece already comes out perfectly set. Naturally, the thickness table is adjusted easily at the press of a button, or can be stepped up in 0.1 mm increments. The feed controls are conveniently placed. The heavy, vibration-damping composite frame, together with the high-quality cutterblock bearings, guarantee immaculate surface results. Its sound-insulated construction ensures a quiet working environment even in the standard configuration. • Planing width: 630 mm • Weight: approx. 1,200–1,400 kg • Planing height: 2.8–300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Rotation speed: 5,000 rpm • Operation: Single-axis control for planing dimension, max. 99 values storable (49 programmable for custom planing sequences); buttons for rapid and fine manual thickness adjustments with digital readout; push-buttons for cutterhead start/stop; built-in hour counter • Cutterhead: TERSA solid steel cutterhead Z4, Ø 125 mm; includes locking mechanism for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, table supported by 4 anti-tilt threaded spindles, finely planed table surface • Feed: Two speeds (6 / 12 m/min), electrically switchable during operation, large rubber feed rollers Ø 85 mm to compensate for varying material thickness, soft and self-cleaning rollers, easy roller replacement; segmented pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable left/right (optional dual connection); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; bearings/cutterhead lubricated via grease fittings • Included accessories: 1 grease gun (filled with long-life grease), 1 oil can, 1 open-end wrench, 1 knife changing tool, 1 pair dummy knives 640 mm, 2 pairs TERSA reversible knives 640 mm CV • Emissions: - Sound pressure at operator position LpA as per DIN EN ISO 11202 [dB(A)] - Idle (without extraction) P1: 65 Lhodpfeqlclbex Aahsr - Idle (with extraction) P1: 77 - Working (without extraction) P2: 65 - Working (with extraction) P2: 78 - Sound power level LWA as per DIN EN ISO 3746 [dB(A)] - Idle (without extraction): 84 - Working (with extraction): 90 • Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang pemotongan (maks.): 3.300 mm, diameter mata gergaji: 315 mm, ketinggian potong (maks.): 82 mm, kecepatan pemakanan sumbu X: 100 m/menit, laju pemakanan sumbu Z: 150 m/menit, panjang total: 3.300 mm, lebar total: 3.350 mm, berat keseluruhan: 3.000 kg, penggerak gergaji: 9.000 W, daya: 9 kW (12,24 hp), kecepatan rotasi (maks.): 4.400 rpm, kecepatan mata gergaji: 4.400 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, SCHEER PA 4500 – 3300 x 3350 S7WIN10 Year of manufacture: 2025 | Condition: NEW | Control: PA-WIN10 + SIMATIC S7 | High-Performance Panel Saw System for Maximum Precision & Efficiency The SCHEER PA 4500 is a robust, industry-proven panel dividing saw designed for precise machining of coated and uncoated wood-based panels. Engineered for demanding applications, its standard configuration already meets all requirements for modern cutting operations. Main Technical Data: - Cutting length (max.): 3300 mm - Cutting height (infinitely variable): up to 82 mm - Main saw blade: Ø 315 mm | 60 teeth | Cut width 3.2 mm - Scoring saw blade: Ø 200 mm | conical | Cut width 3.2–4.0 mm - Main saw motor: 9.0 kW - Scoring unit motor: 1.1 kW - Saw carriage drive: 2.32 kW - Main saw blade speed: approx. 4400 rpm - Saw carriage feed: 0–100 m/min (variable adjustment) - Saw carriage return: 150 m/min (lowered) - Electrical connection: 400V / 50Hz / 3Ph - Pneumatics: 6 bar, 15 NL/cycle - Extraction: 3 x 140 mm | Capacity: 3300 m³/h at 20 m/s - Working height: approx. 930 mm - Angle stop: left Machine Concept & Highlights: - Heavy-duty cast honeycomb frame for vibration damping - Absolute value encoder for highest positioning accuracy (no referencing required) - Distance- and time-optimized saw carriage movement - Automatic oil mist lubrication & guideway blow-off - Program-controlled saw blade adjustment (height & scoring side) - ProLock quick-change system for the saw blade - "Dust-tested" – emissions only 0.65 mg/m³ Machine Equipment: - 1x Angle pressure device WP 8500-1400 Adjustment range: 0–2200 mm Pressure force: approx. 480 N Cycle-controlled retraction function for panel handling - 1x Feed table HP 5130 – 33 x 33 Lodpfx Aswrpcxeahjhr Rear-mounted with hardened guides & racks Roller conveyor system for smooth panel transport - 6 clamp fingers (spacing: 70 / 262 / 454 / 838 / 1173 / 2630 mm) Servo drive with ±0.1 mm accuracy - 1x Angle stop table HP 5137-1-1465 - 1x Workpiece support table HP 5135-1-1465 Each with Pertinax coating, 1465 x 800 mm - 1x Air cushion system LK 5169 Central radial fan, max. pressure 2800 N/m² - 1x Control cabinet Dust-tight, separately mounted, vibration-protected - 19" TFT flat panel monitor, keyboard, trackball Control & Software: - SIMATIC WinLC RTX soft PLC with S7 functionality - PA-WIN10 user interface on Windows 10 Professional (64 bit) (upgrade to latest Windows version possible at any time) - True-to-scale real-time simulation and graphical cut pattern editor - Integrated interfaces (label printing, panel storage management, etc.) - Network-compatible, future-proof, and modularly expandable Operating Modes & Operation: - Manual mode: single cut, chain dimension, trimming, remnant cutting - Automatic mode: processing of cut plans, online order processing - Editor: batch list-based planning & optimization - Maintenance & diagnostics: saw blade measurement, single component control, etc. 📞 Contact us for a personalized quote or to arrange a viewing. Delivery, installation, commissioning, and training are optionally available.