Mesin penghancur dua poros

Mayfran MSA

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, Iaedpst Hw Iisfx Alcjt drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, daya: 75 kW (101,97 hp),

Tahun pembuatan: 2011, Kondisi: baik (bekas), Shredding plant, single-shaft shredder, shredder, chopper, cutting mill, single-shaft crusher, rotor mill - Shredding plant: entirely made of stainless steel, suitable for frozen meat or other materials - Motor power: 4 kW - Speed: approx. 60 rpm - Number of cutting knives: 10 pcs Iodpfoh Di H Dex Alcjat - Cutting knife size: 250 mm - Feed hopper: 500 x 895 x H480 mm - Dimensions: 880/1390/H2060 mm - Weight: 640 kg

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), NEUE HERBOLD granulator Universal mill – heavy duty design - Year of manufacture: 1998 - Constructed from stainless steel - From a technical center (machine was exclusively used for testing/demonstration purposes) Iodpfxeh Rwc Ej Alcsat - Rotor diameter: 300 mm - Working width: 500 mm - 3 knife rows

Kondisi: baik (bekas), Tahun pembuatan: 1992, Single-piece sanding machine Top and bottom sanding Electric height adjustment with digital display Continuously adjustable feed speed Star-delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brush unit, top and bottom, manual height adjustment Working width: 190 mm Working height: 4 – 150 mm Min. workpiece length: approx. 280 mm Sanding belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 – 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Specifications are subject to errors and prior sale. • Stated prices are ex-works, loaded free of charge. • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and phone number!) Iaodpfx Aewyda Uelcot

Kondisi: sangat baik (bekas), The plant essentially consists of: - 2 feed units (walking floor bunkers) - 2 silos, each with 55 cbm capacity, equipped with discharge screws - 2 screw conveyors Iaodpslxzl Ejfx Alcot - 4 mixing and homogenization chambers - 5 transport conveyor belts - 2 parallel-connected twin-shaft extruders for the disintegration of woody biomass - 1 twin-shaft paddle mixer - Twin-shaft extruder for homogenization - Laboratory container with mixing and dosing equipment for liquid extracts

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin las multifungsi (Mig, tig, elektroda) Merek: Kemppi Model: Pro 3000 / Promig 500 Mesin dilengkapi pendingin air dengan pendingin Kemppi PRO Cool 10. Unit untuk pengelasan tig/elektroda Kemppi PRO TIG 410 - Panel Kemppi TL - Fungsi untuk pengelasan tig: pre gas, post gas, arc, high frequency Generator tig Kemppi Pro 3000 Unit untuk pengelasan mig/kawat Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Panel kontrol Kemppi ML SYNERGIC - 4 roller penggerak - Arus arc pulsasi dengan panel Synergic - Fungsi khusus untuk pengelasan baja, stainless steel, dan aluminium Termasuk: - Torch pengelasan tig - Torch pengelasan mig - Massa - Regulator gas Iajdpfx Alsxf Hv Hecjt

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 450 mm, panjang umpan sumbu Y: 300 mm, panjang umpan sumbu Z: 350 mm, Layar digital 3-sumbu Spindel frais horisontal dan vertikal Pinol Data teknis: Pergerakan memanjang X: 450 mm Ijdpfewyit Hex Alceat Pergerakan melintang Y: 300 mm Pergerakan vertikal Z: 350 mm Ukuran meja: 800x400 mm Taper spindel: SK40 Kisaran putaran: 50-2500 rpm Kisaran feeding: 8-400 mm/menit Daya motor: 3,2 kW Berat mesin: 1500 kg Data teknis, aksesori, dan deskripsi mesin tidak mengikat.

Tahun pembuatan: 1987, Kondisi: bekas, Kehren rotary table type RS 7C, used Manufacturer: Kehren, Honnef Stock no.: 4179 Year of manufacture: 1987 Control system: Siemens 3G PLC: Siemens S5 Grinding motor: BBC QUB 200 Rotary table diameter: 750 mm Grinding head diameter: 460 mm Iodpfx Ajhgmwgslceat Control panel with screen Coolant system Flush pump Coolant pump Automatic paper band filter system Control cabinet

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), A multi-blade saw from Construzioni Macchine Legno s.r.l. is available. Saw blade diameter min./max.: 250 mm / 360 mm, bore diameter min./max.: 70 mm / 95 mm, cutting width: 320 mm, variable/fixed cutting height: 90 mm / 120 mm, weight: approx. 3,000 kg. Inspection on site is possible. Ijdewv Umwjpfx Alcoat