Spindel penghitung pusat pembubutan-penggilingan CNC

Mazak INTEGREX 200-4 S

Kondisi: bekas, Deckel Maho DMU 70 eVolution Kedpfxew Rtd Ae Aahenf

Kondisi: bekas, Tahun pembuatan: 2010, Maximum turning diameter: 410 mm Turning length: 1,235 mm Control: IT / Turn Plus Heidenhain Swing diameter over bed: 700 mm Main spindle speed range: max. 4,000 rpm Main spindle drive power: 35 / 45 kW Max. torque: 770 Nm Spindle nose: 220 h5 Spindle diameter at front bearing: 160 mm Max. usable bar diameter: 95 / 104 mm C-axis: 0.001° Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range of driven tool stations: max. 4,000 rpm Drive power driven tool stations: 12 kW Max. torque driven tools: 36 Nm Tool holder: VDI 40 DIN 69880 Turret indexing time (30°): 0.4 sec Y-axis: 120 (+/- 60) mm X-axis: 300 mm Z-axis: 1,300 mm Y-axis: +/- 60 mm Tailstock travel: 1,200 mm Tailstock taper: MK 5 Knedpfx Aovzhiwoahsf Clamping pressure: 1,400 daN Rapid traverse (X / Y / Z): 30 / 22.5 / 30 m/min Total power requirement: 60 kVA Machine weight: approx. 7.7 t Space requirement: approx. 6.0 x 3.5 x 2.5 m CNC Turning and Milling Center GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Driven tools - Direct measuring system - Bar machining package - Interface for bar feeder / bar loading magazine

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 900 mm, rentang pengukuran sumbu Y: 1.200 mm, rentang pengukuran sumbu Z: 700 mm, Zeiss CNC coordinate measuring machine Prismo VAST GOLD with rotary table Year of manufacture: 1999 Retrofit: 2013 Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm Technically and visually in very good condition Machine features, equipment: Kedpfovdtzdex Aahenf Control system C98 with BP26_SE control panel VAST GOLD sensor 13-slot probe changer magazine Probe change tray Probe accessories Calibration sphere Reference probe Workstation with monitor Software: Calypso Basic 5.2 Upgrade to the latest Calypso version and further options possible Complete retrofit with C99 and latest Calypso possible Available at short notice

Kondisi: bekas, TECHNICAL DATA - Maximum workpiece dimensions: 650 x 420 [mm] - Maximum workpiece thickness: 160 [mm] - Maximum weight: 350 [kg] - Travel (X, Y, Z): 320 x 220 x 180 [mm] - Table feed rate: 900 [mm/min] - Wire feed speed: 0 - 10 [m/min] - Wire tension: 80 to 2500 [g] - Wire guide: Ø 0.25 [mm] - Tank capacity: 260 [l] - Dimensions: 3,200 x 2,200 x 2,000 [mm] - Weight: 1,900 [kg] EQUIPMENT - CNC FANUC 16W control Kjdpfsuhcbcjx Aahonf - Cooling unit - Lubrication tank with pump - Automatic threading

Kondisi: bekas, Tahun pembuatan: 2001, Kontrol SIEMENS Luas meja 160 mm Berat mesin sekitar 10 t Diameter nominal benda kerja 130 mm Modul nominal 3 mm Perjalanan aksial maksimum 250 mm Sudut pemutaran pisau Knsdpfx Aaoudc S Tohof Putaran maksimum benda kerja 1000 rpm Diameter bidang kerja maksimum 80 mm Panjang bidang kerja maksimum / panjang keseluruhan 170/2 mm Perpindahan meja maksimal 170 mm Kecepatan bidang kerja maksimum 3000 rpm

Kondisi: baru, Tahun pembuatan: 2024, New machine Year of manufacture: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper volume: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput performance: up to 50 kg/h (depending on material) Paint finish: Weima standard Connected load: 400 V +/- 5% / 50 Hz Including: Press mechanism with filler cylinder, main cylinder, clamp cylinder Connector for transport pipe Chromed clamp Hydraulic tank 160 l with pump motor + valve control Kodpfx Aet Hagnoahenf Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw discharge chute + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: planer shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput performance: approx. 50 m³/year/ * Foreign matter specification: Anything other than wood, wood pieces larger than 12 mm. Throughput is highly material-dependent. Listed figures are average values. Depending on mix ratio, moisture content, and material characteristics! Application case not or not fully known/specifed. Machine is sold appropriately and solution-oriented by a specialist dealer. With heat buildup in the hopper, running time may be drastically reduced depending on heat development. Availability: promptly Location: Solingen

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 06.E.400.020, Country of manufacture: CH Voltage: 3x400V - 24V DC Dimensions: 237x206x195 cm Net weight: 5500 kg TECHNICAL DATA Control: Fanuc 21i-MB 3 Axes U: Work grinding wheel axis W: Workpiece to workpiece / dressing axis X: Dressing wheel axis Working area Through-feed grinding Workpiece diameter: Ø 1.5 - 50 mm Working area Plunge grinding Workpiece diameter: Ø 1.5 - 100 mm Max. grinding length: 270 mm Grinding wheel Outer diameter max.: Ø 400 mm Inner diameter: Ø 203.2 mm Max. speed: 50 m/sec Drive power: 11 kW Optional drive power: 29 kW Regulating wheel Max. outer diameter: Ø 250 mm Inner diameter: Ø 127 mm Speed: 5 - 1,000 min⁻¹ Inclination angle: +5° / -5° Drive power: 3.7 kW Positioning accuracy All 3 axes: 0.1 µm Glass scale resolution: 0.05 µm Dimensions Length: 2060 mm Width (with door open): 2370 mm (3120 mm) Height (with guard open): 1950 mm (2100 mm) Weight: 5500 kg Compressed air Max. pressure: 16 bar Kjdpfjiqt S Aox Aahsnf Air consumption: 165 L/min Air consumption with dressing spindle: 250 L/min Temperature: +15° / +40°C Errors and omissions excepted, the technical data is provided without obligation.

Tahun pembuatan: 1990, Kondisi: baik (bekas), CNC 4th axis Kedpfxegabu Ue Aahenf Make: NIKKEN Type: CNC-200, Year: 1990 with tailstock and base plate.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, cnc-hermle-c50u-2008 Knodpfx Aasx Hg Twjhsf

Kondisi: bekas, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1045-0282, tinggi pusat: 175 mm, lebar di tengah: 1.000 mm, diameter roda gerinda: 500 mm, CNC Universal Cylindrical Grinding Machine S33 Nomor mesin: 1045-0282 Tahun pembuatan: 2023 Knedpfx Asxy E Rlsahsf Jarak antar senter: 1000 mm Tinggi senter: 175 mm Lokasi: Pabrik di Swiss. Silakan hubungi kami untuk penawaran detail.