Pusat pembubutan dan milling CNC

Mazak Integrex 200-4ST

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, panjang pembubutan: 1.545 mm, diameter putar di atas sled silang: 660 mm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 580 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 1.545 mm, Manufacturer: MAZAK Model: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year of manufacture: 2007 Multitasking machining in a single machine setup Sub spindle takeover with full C-axis functionality The INTEGREX-IV series is capable of performing all machining operations completely High-speed milling spindle with swiveling capability up to 240° Lower turret with driven tooling (live tooling) Chip conveyor with coolant system and 15 bar high-pressure through-spindle coolant (IKZ) Double chuck KNCS-N 210-53 (SMW Autoblok) MAZAK Flex-GL150F gantry loader Gripping range: 200 × 120 mm (length) / 15 kg Max. turning diameter: 660 mm X-axis travel: 580 mm Y-axis travel: 160 mm Z-axis travel: 1545 mm B-axis: 270° Spindle bore: 65 mm Spindle speed: 5000 rpm Spindle power: 22 kW Fpedpfsx S Hm Iex Am Ssh Sub spindle speed: 5000 rpm Sub spindle through-hole: 65 mm Sub spindle power: 18.5 kW Tool changer: 40 stations B-axis interface: Capto C6 B-axis spindle speed: 12,000 rpm Length: 5200 mm Width: 2550 mm Height: 2600 mm Weight: 14,000 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 67 h, daya motor spindle: 22.000 W, kecepatan spindel (maks.): 3.300 rpm, jarak pergerakan sumbu X: 615 mm, jarak lintasan sumbu Y: 260 mm, jarak gerak sumbu Z: 1.585 mm, berat keseluruhan: 16.600 kg, produsen pengendali: MAZATROL, jumlah sumbu: 5, This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features simultaneous 5-axis machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine offers a robust tool magazine with 72 positions and is equipped with both a main and a secondary spindle to extend machining capabilities. If you are looking for high-quality turning and milling operations, consider the Mazak INTEGREX i-200 S turn-mill center. Contact us for further details. • Operating hours: Approx. 68 hours • Availability: Immediately • Key Features: • Full simultaneous 5-axis machining • Main spindle + secondary spindle • Milling spindle with automatic tool changer • Complete turning and milling in a single setup • Capacity and Working Area • Maximum swing: Ø658 mm • Swing over cross slide: Ø658 mm • Maximum machining diameter: Ø658 mm • Maximum machining length: 1519 mm Fodpfx Ajy Sltgem Seph • Bar capacity (main spindle): Ø102 mm • Bar capacity (secondary spindle): Ø65 mm • Maximum supported mass (main spindle): 650 kg • Maximum supported mass (secondary spindle): 300 kg • Main Spindle (HD1) • Chuck size: 12" • Spindle bore: Ø112 mm • Motor power: 22 / 18.5 kW • Torque: 883.3 / 716.2 Nm • Acceleration time: 4.9 s • Air blast system: Included • Additional equipment: Heavy-duty spindle HD1; replacement of standard spindle cylinder and chuck • Secondary Spindle (HD2) • Chuck size: 8" • Maximum speed: 5,000 rpm • Spindle bore: Ø76 mm • Motor power: 18.5 / 15 kW • Torque: 325 / 238 Nm • Acceleration time: 4.5 s • Factory option: HD2 spindle synchronization function • Milling Spindle • Maximum speed: 12,000 rpm • Motor power: 24 kW • Cooling: Oil & air • Tool interface: HSK-A63 (T63) • 90° indexing time: 0.5 s • Acceleration: 1.27 s • Lubrication: Oil & air • Tool Capacities: • O.D. turning tools: □25 mm • I.D. turning tools: Ø40 mm • Milling tools: Max Ø125 × 400 mm • Axis Travels • W: 1574 mm • Rapid traverse: X/Z 50 m/min; Y 40 m/min; W 30 m/min • Tool System and Magazine • Tool system: CAPTO C6 • Tool magazine capacity: 72 positions • Automatic tool changer: Included • Features: Tool breakage detection in magazine; overload protection • CNC Functions and Software • 5-axis machining functional package • Cutter radius compensation for 5-axis • Cylindrical interpolation • Polar coordinate interpolation • Synchronous threading with milling spindle • Cooling and Preparation • Through-tool coolant: 7 MPa • Prepared for oil mist extraction unit • Highlights • Practically as-new with only ~68 operating hours • Extensive factory configuration • Full simultaneous 5-axis machining • Main and sub-spindle configuration • 72-tool CAPTO magazine • Production-ready with significant savings over new purchase Additional Equipment • Chip and Parts Handling • Side chip conveyor – Consep type • Parts belt conveyor • Bar feeding and workpiece handling • LNS QLS II bar feeder magazine • Interface kit for bar feeder • Automatic parts catcher • Filtration • SEI FILTRATION unit • Series: JT040 • Model: 40/70-V-I-R-FM • Year: 2018 • Miscellaneous Accessories • Mounting dowels for the machine • 3-color machine status signal lamp Technical Specification

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Max. load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Travel ranges: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides on X/Y axis Roller guides on Z axis Fodpfx Ameifn N Ne Sjph Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM-Type) / changer: Magazine capacity: 30 tools System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300-liter tank and pumps External coolant around spindle Chip spirals right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling control panel Electronic handwheel (wired) Central lubrication oil/air Fully enclosed Work light Heat exchanger on control cabinet Auto power off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation space: W3,160 x D3,000 x H3,000 mm (including chip conveyor discharge to the left) Machine weight: approx. 5,400 kg (net) Included special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 slots, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. wiring and Harting connector without axis driver Coolant, chip, and compressed air management: - Bed wash - Through-spindle coolant pump with 20 bar pressure, for direct-drive spindles - incl. cartridge filter - Belt-type chip conveyor incl. chip bin (chip discharge front to left machine side) Measuring and monitoring systems: - RENISHAW OMP-60 touch probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage control in the machine, incl. holder - Auto-door (side door) - Pneumatic interface for workpiece clamping - Included clamping devices as shown with RoboJob Mill Assist 25kg (Year 2025 - NEW) - Full enclosure - Double gripper Immediately available

Kondisi: bekas, Tahun pembuatan: 2010, Maximum turning diameter: 320 mm Turning length: 810 mm Control: MSX 701 Maximum spindle speed: 6,000 rpm Main spindle drive power: 22 / 18 kW Maximum bar capacity: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Maximum counter spindle speed: 6,000 rpm Counter spindle drive power: 22 / 18 kW Maximum bar capacity (counter spindle): 52 mm Fsdsv E R E Aopfx Am Seph C-axis (counter spindle): 0.001° Spindle nose (counter spindle): JIS A2-5 Collet chuck (counter spindle): 140 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Driven tool drive power: 7.5 / 5.5 kW Y-axis travel: 110 mm Number of tool stations (lower turret): 16 positions Number of driven tool stations (lower turret): 16 positions Speed range – driven tools (lower turret): max. 6,000 rpm Driven tool drive power (lower turret): 7.5 / 5.5 kW X-axis travel (1/2): 210 mm Y-axis travel: 110 mm Z-axis travel (1/2): 810 mm B-axis travel: 900 mm Total power requirement: 86 kVA Machine weight approx.: 8.1 t Space requirement approx.: 8.0 x 3.5 x 2.8 m CNC Turning and Milling Center MORI SEIKI - NZ 1500 T2Y - Main spindle and counter spindle - 2 turrets, top and bottom - Y-axis - 2x 16 driven tool positions

Kondisi: baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Description: The machine is in good technical condition and can be inspected upon prior arrangement. Equipped with the Siemens Shopturn system, including a loader, and fully equipped. Fpsdpfjy Rgafex Am Sjh BASIC PARAMETERS Working Area - Max. turning diameter Ø: approx. 410–500 mm - Max. length: 800 mm - Distance between spindles: approx. 1020 mm - Swing over bed: approx. 700 mm - Realistic applications: ideal for shafts, flanges, and components up to approx. 800 mm Travels (axes) - X-axis: approx. 480 mm - Y-axis: approx. 100 mm - Z-axis: approx. 800–845 mm - B-axis: approx. 110° (5-axis machining) - C-axis: 360° (indexing + interpolation) This makes it a fully-fledged turn-mill center (not a standard lathe). Spindles - Main spindle: - Speed: approx. 5000 rpm - Power: approx. 25–34 kW - Bar capacity: approx. 76–87 mm - Sub-spindle: - Speed: approx. 6000 rpm - Milling spindle (main difference compared to a conventional lathe): - Speed: up to 12,000 – 20,000 rpm - Power: approx. 19–22 kW - Taper: HSK-A63 or Capto C6 - Capabilities: milling, drilling, tapping, 5-axis simultaneous operations Tool System - Magazine: 24 – 48 tools - Live tools: yes (fully integrated) Control System - Siemens 840D sl + CELOS (most common) Weight and Dimensions - Weight: approx. 10,000 kg - Dimensions: approx. 6.5 × 2.7 × 2.0 m

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Mesin seperti baru, hanya 600 jam operasi! HEIDENHAIN 640 Meja 1300x700 Sumbu X, Y, Z: X=1220 Y=710 Z=630 Fpodpfxewx Nkco Am Soh Putaran spindle 60–10000 Penukar alat 24 posisi. Dimensi mesin 3200 x 3900 x 2490 mm Berat mesin 9500 KG

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Center height 175 mm Space requirements approx. 3.6/3.5 m As a world-leading company in the field of Kellenberger – Overhaul / Retrofit, we are not only able to deliver the machines in as-new condition with warranty, but can also offer you service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New user-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Standard equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper, optionally with fine adjustment - Grinding spindle head T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - B-axis high resolution - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP Control (sensor on the grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra charge: - HF internal grinding spindle - Ultra-precise, high-stiffness workpiece spindle head - Measuring control - Extraction unit - Paper band filter Fpsdpouwv H Hofx Am Soh Control: Basic grinding cycles: - Zeroing workpiece with Z-Pos (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Diamond dresser measurement - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (B-axis swivel, dressing with straight wheel) - External and internal radius grinding (radius dressed onto wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Kondisi: baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 1.000 t, lebar meja: 1.500 mm, tabel jarak ke piston: 1.750 mm, panjang total: 2.700 mm, Gebrauchte 1000-Tonnen Hydraulikpresse zu verkaufen 1000-TONNEN-PRESSE SEITENRAHMEN Maximal TYP Fjdpfxeucdgpe Am Ssph KAPAZITÄT: 1000 Tonnen DRUCK: 175 kgf/cm² HUB: 1000 mm LICHTSPALT (DAYLIGHT): 1750 mm WERKZEUGAUFLAGE (BOLSTER AREA): 2700 mm x 1500 mm RÜCKZUGSKRAFT (PULL BACK CAPACITY): 52,7 Tonnen ZIEHKISSENKRAFT (DIE CUSHION CAPACITY): 50 Tonnen ZIEHKISSENHUB (DIE CUSHION STROKE): 180 mm HAUPTMOTOR: 415 V, 50 Hz, 6-polig, 110 kW ÖLTANKKAPAZITÄT: 1800 Liter

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Maximaler Bearbeitungsdurchmesser 412 mm, maximale Drehlänge 753 mm, 225° Schwenkbereich der B-Achse, 15-PS-Spindelmotor, Spindeldrehzahl 6.000 min⁻¹, Gegenspindeldrehzahl 6.000 min⁻¹, Stangendurchlass 52 mm, Frässpindeldrehzahl 12.000 min⁻¹, C-Achse & Fräsen, 9-Stationen-Unterrevolver. Späneförderer, Werkzeugvermessung, Kühlung, verriegelte Schutzhauben, schwenkbarer Universal-Kopf, C-Achse (0,001°), Mazatrol Matrix Steuerung. Fodpfswxw A Hex Am Soph

Kondisi: bekas, Tahun pembuatan: 2000, Grinding diameter 450 mm Grinding length 1000 mm Centre height 225 mm Photo shown is of a previously delivered machine with similar configuration: - Major overhaul - Table geometry renewed - Partial interior repainting Grinding wheel assembly LEFT: 400x63x127 mm (standard) Grinding wheel assembly RIGHT: 300x40x127 mm Internal grinding attachment Ø120 mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding, Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35 m/s or 45 m/s High-frequency internal grinding spindle Fpedpfx Asxzk Nism Seh Operating unit for MFV and MFZ spindles Hydraulic quill retraction for tailstock NO fine adjustment on the tailstock Spring-loaded quill insert Upper table cooling Standard workpiece spindle head MK 5, DIN 55026, size 5" MICRO-adjustment for the standard workpiece spindle head Dressing device under the table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measurement system KELSET, MARPOSS Touch sensor MARPOSS Measuring control MARPOSS Minialsar prepared Paper band filter