Mesin bubut Mazak

mazak qt200

Tahun pembuatan: 2012, Kondisi: baik (bekas), Mazatrol Smart CNC control 3-jaw chuck C-axis Driven tools 12-position turret Tool eye Tailstock Coolant unit Chip conveyor Bedpfeiyx Diex Ad Rowr Technical data / technical details: max. swing diameter: 660 mm max. turning diameter: 350 mm max. turning length: 532 mm Cross travel (X): 225 mm Longitudinal travel (Z): 560 mm Spindle speed range: 5,000 rpm Speed of driven tools: 4,500 rpm Turret head: 12 positions Rapid traverse X/Z: 30/33 m/min Spindle drive power: 15 kW Machine weight approx.: 4,500 kg Technical data, accessories and description of the machine are not binding.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, SFM Sunfirm CNC bubut dalam kondisi kerja baik. Spesifikasi: Diameter pembubutan di atas ranjang: 1520 mm Diameter pembubutan di atas alas lintang: 1100 mm Diameter pembubutan di kantong: 1800 mm Bsdpfew Uqf Sox Ad Rowr Jarak antara senter: 3000 mm Putaran: 6-500 rpm dalam 4 langkah Pergerakan sumbu Z: 3300 mm Lebar ranjang: 850 mm Kontrol FAGOR 8055 Turret 8 posisi Daya motor: 30/37 kW Aksesori: Chuck 4 rahang Ø 1400 mm Konveyor serutan Turret 8 posisi Steady rest tetap

Kondisi: bekas, Tahun pembuatan: 2020, Swing diameter: 380 mm Turning length: 511 mm Control: Mazatrol SmoothG Swing diameter over cross slide: 276 mm Maximum swing diameter over bed: 675 mm Standard machining diameter: 276 mm Bar capacity: 65 mm X-axis travel: 234 mm Rapid traverse X-axis: 30 m/min Z-axis travel: 625 mm Rapid traverse Z-axis: 33 m/min Spindle speed: 35 - 5000 rpm Spindle nose: A2-6 Spindle bore: 76 mm Power (40% duty cycle): 26 kW Rated power (100% continuous operation): 22 kW Maximum torque: 465 Nm Spindle speed (milling spindle): 6000 rpm Main drive power: 11 kW Maximum torque: 90 Nm Milling spindle speed (driven tools): 35-6000 rpm Max. torque at milling spindle: 47 Nm Milling spindle drive power: 5.5 kW (40% duty cycle) Milling spindle power (continuous operation): 3.7 kW Number of tool stations: 12 (driven) Tool cross-section (external): 25 mm² Boring bar diameter: 40 mm Bedpstugggofx Ad Rowr Drill diameter: 20 mm Milling cutter diameter: 20 mm Tapping diameter: M20x2.5 Turret indexing time per station: approx. 0.20 sec Coolant tank: 180 l Connected load: 46.2 kW Machine weight: approx. 5.9 t Space requirement: approx. 2.7 x 1.9 x 1.9 m Machine is in like-new condition including the following accessories: - Signal light (3-color LED), rectangular - High-performance coolant system (1.1 kW) Max. flow rate: 17.6 l/min, Pressure (at pump): 5 bar - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/NSCH 98 mm - Preparation for bar feeder - Robot interface (Advance/Profibus) - Chip conveyor with low discharge height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Prep. for using a hollow chuck cylinder on sub-spindle - Hollow clamping device incl. draw tube + cylinder - Chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Collet change device STANDARD EQUIPMENT Automatic on/off with warm-up function Air blast device at chuck on sub-spindle Linear guide systems with guide carriages USB port (1 connection) Set of manuals in electronic form on CD C-axis main spindle input accuracy 0.0001° Spindle positioning sub-spindle without C-axis input accuracy 0.001° 12-position VDI tool turret Operator door with interlock switch Double foot switch for main and sub-spindle Hydraulic pressure safety interlock Fully enclosed work area, work area lighting Safety features in accordance with international standards High-performance coolant system (520 W), max. flow rate 11.5 l/min Complete coolant system Automatic opening/closing of chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (side) Synchronization main and sub-spindle Synchronous tapping with milling spindle Relocation detector Mazatrol SmoothG control, 19" LCD color display (touch screen) User macro (600 variables), EIA/ISO input function Optional stop (selectable halt) Background tool path verification Thread cutting function (G33), polar coordinate input (EIA) Direct input of drawing data Interface for LAN, SD memory card I/F - Used machine, sold without warranty -

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 3.200 mm, jarak gerak sumbu Z: 2.050 mm, panjang total: 13.000 mm, panjang meja: 5.000 mm, lebar meja: 3.000 mm, lebar total: 8.000 mm, kecepatan spindel (min.): 12.000 rpm, tinggi total: 6.000 mm, beban meja: 50.000 kg, berat keseluruhan: 120.000 kg, jumlah slot dalam magazin alat: 32, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, 1 Bwjdpfxoy Anrte Ad Rer

Kondisi: bekas, MAZAK QT 20 Model: OT-20-N-K Turret: 8 positions Motor: 18.5 kW Bwjdpfxowulzve Ad Rsr Year: 1988 Weight: 11,700 lbs Chuck: Ø 250 mm Renewed operational panel

Kondisi: bekas, Tahun pembuatan: 1996, jam operasional: 7.827 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 119713, diameter putar di atas sled silang: 160 mm, panjang pembubutan: 244 mm, diameter pembubutan: 160 mm, lubang spindel: 45 mm, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 1 rpm, jarak pergerakan sumbu X: 155 mm, jarak gerak sumbu Z: 290 mm, daya motor spindle: 10.000 W, gerak cepat sumbu X: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan rotasi (maks.): 6.000 rpm, tinggi total: 1.780 mm, panjang total: 2.000 mm, lebar total: 1.330 mm, jarak gerak quill: 150 mm, diameter quill: 55 mm, gores kuas bulu: 150 mm, berat benda kerja (maks.): 25 kg, berat keseluruhan: 2.700 kg, saluran batang: 40 mm, diameter luar chuck: 154 mm, Diameter batang (maks.): 45 mm, diameter spindel: 50 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, mazak-qt10-en Bedpsyt E Nvjfx Ad Rowr

Kondisi: bekas, Tahun pembuatan: 2012, Maximum wheel diameter: 300 mm Wheel width: 320 mm Module – max.: 10 Module – min.: 0.5 Maximum helix angle: 45° Frequency: 50 Hz Voltage: 400 V Main fuse: 125 A X-axis: 270 mm Y-axis: 250 mm Z-axis: 320 mm A-axis: +/- 45° B-axis: 360° C-axis: 360° Bsdpfx Adex R U Has Rewr Total power requirement: 89 kW Machine weight approx. 23.5 t Space requirement approx. 11.2 x 5.5 x 2.9 m Automated Oil centrifuge station EWAB workpiece storage Hoffmann coolant filtration system HSF 100 SE/K Minimax fire extinguishing system W+W air filtration system Promot Automation "Cellmaster" (3 cells), year of manufacture 2019

Kondisi: bekas, Tahun pembuatan: 2002, Max. turning diameter: 420 mm Turning length: 1,250 mm CNC Control: INDEX, C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1,250 mm Travel X2: 170 mm Travel Z2: 1,250 mm Travel X3: 320 mm Travel Z3: 1,250 mm Max. main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle - max. spindle speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle - spindle bore: 102 mm Counter spindle - spindle nose: DIN 55026 size 11 Counter spindle - torque: 675 Nm Counter spindle travel: 1,250 mm Feed force X1: 14,000 N / Z1: 14,000 N Bwodpfjt U R Hzox Ad Rjr Rapid traverse X1: 20 m/min / Z1: 40 m/min Feed force X2: 8,600 N / Z2: 14,000 N Rapid traverse X2: 20 m/min / Z2: 40 m/min Feed force X3: 14,000 N / Z3: 14,000 N Rapid traverse X3: 20 m/min / Z3: 40 m/min Number of turret positions, Turret 1 = 12 Number of turret positions, Turret 2 = 10 Number of turret positions, Turret 3 = 12 Number of driven tool stations: 12 / 10 / 12 Max. driven tool speed: 6,000 rpm Torque (driven tools): 36 / 21 / 36 Nm Tool shank DIN 69880 Tool holder Ø 40 x 63 mm Total connected load: 120 kW Machine weight approx.: 19 t Machine dimensions (L x W x H): 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on main spindle - HAINBUCH collet chuck, SPANNTOP SP on counter spindle - Various tool holders (including for driven tools) - Chip conveyor - Coolant system Note: All three tool turrets are prepared for through-tool coolant (IKZ), however, the high-pressure system is not included with the machine.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 8.155 h, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 1.800 mm, panjang umpan sumbu Y: 1.000 mm, panjang umpan sumbu Z: 1.000 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 50 rpm, lebar meja: 850 mm, panjang meja: 2.000 mm, berat keseluruhan: 13.500 kg, daya: 30 kW (40,79 hp), CME FS-2 Bettfräsmaschine mit nur 8.155 Betriebsstunden, Steuerung Heidenhain 426B, inkl. Messtaster und vollständigem Satz an Handbüchern. Bjdpfx Adequqq As Rjwr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.000 mm, Pusat pemesinan vertikal Produsen: DMG Tipe: DMU 160 P duoBLOCK Tahun pembuatan: 2007 Kontrol: Heidenhain ITNC 530 Sumbu: 5-sumbu simultan Bwjdpfxjzhufhj Ad Rer Perjalanan sumbu X: 1600 mm Y: 1250 mm Z: 1000 mm Magazin alat: 60 slot alat Kecepatan putar: 18.000 rpm - HSK 63 - Probe pengukur - Pengukur alat laser Blum - Tangki pendingin 980 liter - Pendingin internal 40 bar - Konveyor chip - Handwheel elektronik - Mode operasi 4 - Persiapan perangkat lunak 3-D Quickset - Kepala frais universal dengan sumbu A terkontrol Mesin dari institut kedirgantaraan. Kondisi sangat baik. Kesalahan dan penjualan antara dipertahankan.