Mesin pemroses foil

Mecen

Kondisi: siap digunakan (bekas), CAP30 APPLICATOR 1000 HELICAP23: Tahun Pembuatan: 2016 Versi: 300V Jam Operasi: 15.600 Harga: 150.000 EUR FCA Polandia Mesin beroperasi hingga 20 September. Duodpsw Nqn Njfx Aireu Kondisi sangat baik Kondisi sangat baik, siap untuk dikirim.

Kondisi: bekas, Tahun pembuatan: 1993, Technical Details: Mould plate – Length / Width: 500 x 400 mm Heating: Two-stage heating 4.6 and 6.0 kW Control system: PLC Operating voltage: 380 V (3x 20A) / 24 V DC Working height adjustable: 870 – 970 mm Total power requirement: 6 + 2.5 kW Machine dimensions approx. LxWxH: 2.8 x 1.1 x 1.3 m Weight: 570 kg Compact L-sealer with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL, COOLING STATION AND SPECIAL COOLING FAN Djdpfx Aisu Nu Hiorjuu Movable/mobile Operation in automatic mode, but also manual operation possible. Fields of application / Products: - Various brochures, plans or other paper/cardboard materials in DIN A5 / DIN A6 Suitable films: all semi-tubular shrink films up to 0.060 mm Sealing system = impulse sealing, with Teflon-coated separation seam, adjustable Automatic product infeed into the shrink tunnel Further information: - Tunnel pass-through width: 450 mm - Tunnel pass-through height adjustable to 100, 200, 300 and 400 mm - Length of heated tunnel hood: 900 mm - Machine output depends on product and film: 5 to 20 cycles/min (manufacturer’s spec) - Max. film width (folded semi-tubular): 550 / 550 mm at 25 - 50 μm - Frame dimensions: 500 x 500 x 290 mm = max. packaging size Heating: - Two-stage heating 4.6 and 6.0 kW - Fan speed continuously adjustable Cooling station: - Discharge 300 mm - with fan Conveyor: - Feed rate 2.5 – 12 m/min - Continuously adjustable in operation.

Tahun pembuatan: 2026, Kondisi: baru, Fully automatic horizontal wrapping machine SPINNER 1800s Application: Packaging, grouping, and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator Side: - Operating side: right-hand (in direction of product flow) General Technical Data: - Main motor power: 3 kW - Max. ring rotation speed: 40 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 1,600 kg Standard Equipment: - Powered conveyor belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretch tension with mechanical brake device - Automatic stretch clamp and cutting system - Photoelectric sensor for automatic start of the wrapping cycle - Touch screen for adjusting machine parameters to product requirements - Operator safety systems Optional Equipment: Dusdpofzrhdefx Airju - Various types of conveyors - Infeed and outfeed roller tables - Bubble wrap unit Technical Features: Wrapping dimensions: - Max. length: unlimited - Min. size (W x H x L): 600 x 450 x 1200 mm Conveyor Belt Features: - Useful length: 2,300 mm - Total length: 2,450 mm - Working height: 950 mm - Electric motor power: 0.55 kW - Max. speed: 10 m/sec - Max. load capacity: 100 kg/m Stretch Film Details: - Max. width: 250 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended film thickness: 23, 30, 35 micron

Kondisi: baru, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" configuration - Control console "eye-S" (control panel) - Human-Machine Interface software (HMI) "Maestro active edge" - Fine trimming and radius scraper unit, radius = 1 mm - Fine trimming and radius scraper unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer at the infeed fence - "SAVENERGY" kit - Interior lighting for the cabin and edging area - "Nesting" tracing rollers - Release agent spray unit "AAR" 1 - Edge finishing spray unit - Spray device for sensitive edges - Jointing unit "RT-V1" - "EASY SIZE" device - Glue application unit "VC-VM" - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers Dedpfx Aijwkf Ihjreuu - End trimming unit "K-2 Radius" - Bevel and radius trimming unit "R-HP Multiedge 2R" - Corner rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit, automatic straight/R/R positioning, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Surface scraper "RC-N" - Buffing unit "SP-V" The machine is brand new and still in its original packaging. Promotional machine offered at a special price.

Tahun pembuatan: 2005, Kondisi: baik (bekas), nomor mesin/kendaraan: C9 15840, Profilbürstmaschine Tagliabue LB 2 Modell: LB 2 TECHNISCHE DATEN: Baujahr: 2005 Tagliabue Kanten-Schleifmaschine mit 4 oszillierenden Schleifaggregaten. Djdpfxeg Rn Iae Airjuu Zwei vertikale Walzen und zwei innenliegende Querwalzen für das Querbürsten.

Tahun pembuatan: 2026, Kondisi: baru, Fully Automatic Orbital Stretch Wrapper Packaging Machine SPINNER 1500s + BN Application: Packaging, grouping, and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator Side: - Right-hand operation in the running direction General Technical Data: - Main motor power: 2.2 kW - Max. ring rotation speed: 50 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 1,600 kg Standard Equipment: - Powered conveyor belt (infeed and outfeed) for automatic product feed - Adjustable ring rotation speed - Adjustable stretch tension with a mechanical brake system - Automatic stretch film clamping and cutting system - Automatic stretch hook system - Pneumatic hold-down devices (front and rear) pressing from above to secure the product during the cutting process - Photoelectric sensor for automatic start of the wrapping process - Touch screen for adjusting machine parameters to suit product requirements - Operator safety systems Optional Equipment: - Various types of conveyors - Roller infeed and outfeed tables - Air bubble film unit (included in this offer) Technical Specifications: Wrapping Sizes: - Max. length: unlimited - Min. length (W x H x L): 100 x 18 x 550 mm Conveyor Belt Specifications: - Usable length: 1,924 mm - Total length: 2,000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 10 m/sec - Load capacity: 150 kg/m Stretch Film Specifications: - Max. width: 250 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended film thickness: 23, 30, 35 micron Dodpfx Aiefuwrcorjuu Air Bubble Film Unit: - Max. film width: 1,350 mm - Max. film roll diameter: 700 mm - Core diameter: 20–76 mm - Suitable film materials: PW film, PE air bubble film, PVC film - Cutting & sealing system: operating temperature: 50°C–150°C

Tahun pembuatan: 1981, Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Previous application: Production of TPE films up to 6 mm thick. Many other polymers are possible. The system is still operational and can be inspected at any time in Nuremberg. The system consists of: Single-screw extruder Kuhne K45-24D Djdpfx Aju Ttf Neirjuu Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Flat die: Films up to max. 330 mm width Calender Roller width (gross): 1200 mm Roller width (net): 1100 mm (max. film width) Take-off unit and flying knife cutter

Tahun pembuatan: 2015, Kondisi: baik (bekas), Wir verkaufen drei gebrauchte Papier-Zellstoff-Thermoformmaschinen in gutem Zustand inklusive zusätzlichem Equipment. Modell TPM-1500, hergestellt von „Taiwan Pulp Molding“ – einem der weltweit führenden Unternehmen in diesem Bereich. Beschreibung der Thermoforming-Linie: Dreistufiger Produktionsprozess (Formen + Trocknung 30t + Heißpressen 50t). 480 V, 60 Hz; Herstellungsdatum – Okt. 2015. Effektive Formfläche, mm – 1500 x 900 x 120; Gesamtabmessungen, mm – 7600 x 2250 x 3700; Gewicht – 16 Tonnen; Produktionsgeschwindigkeit – bis zu 80 kg/h; Erforderliche Bedieneranzahl – 1; Dujdpfx Aisnab Evereu Pressdruck (entscheidend für Qualität und Leistung) – 40t (1. Stufe) / 50t (2. Stufe); Bewegungsmechanismus – Servoantrieb + Kugelgewindetrieb, Encoder-Positionierung, Genauigkeit +/- 0,01 mm (Antrieb), 0,05 mm (Mechanik); Automatische Sprühsysteme zur Qualitätsverbesserung – Für Formen: einstellbares Zeitintervall (15-20 bar). Für Produkte: automatisch (2-3 bar); Sicherheitsausstattung – Not-Aus-Taste, optische Sensoren, Schutzumzäunung. Installierte Leistung – bis zu 400 kW, abhängig vom Produkttyp und der Anzahl der Heizelemente. Besonderheiten: 1. Komplett formgetrocknete Zellstoffprodukte. 2. Keine Verformung oder Maßabweichung. 3. Glatte Oberfläche, höchste Oberflächenqualität der Branche. 4. Maximale Formausnutzung. 5. Für unterschiedliche Wandstärken geeignet. Geeignet für die Herstellung folgender Produkte: Hochwertige geformte Papierverpackungen; Einweg-Papiergeschirr; Einweg-Papierdeckel für Becher; Papierbecherhalter; Papier-Eierkartons; usw. Jedes Thermoformer-Set beinhaltet: Taiwan Pulp Molding Auto Stacker – TPM-AS-1500 0,5 PS, zweistufiger Auto-Stapler 480 V, 60 Hz, Bandbreite: 1500 mm; Cutes Wasser-Ring-Vakuumpumpe (2017) – Cutes NN-1001FCD Vakuumpumpe, 75 PS, 880 U/min, 1.000 CFM. Preis pro Set: Thermoforming-Maschine 300.000 €, Autostacker 20.000 €, Cutes Wasser-Ring-Vakuumpumpe 5.000 € = 325.000 € pro Set. Bei Abnahme mehrerer Sets ist ein Preisnachlass verhandelbar. Das letzte Set beinhaltet ein Zellstoffaufbereitungssystem und kostet zzgl. 50.000 €: 1. Taiwan Pulp Molding Co. Hydropulper mit automatischem Zuführband (2017) – Edelstahl-Hydropulper mit 100 PS Motor, 90" x 80" hoch, mit 47" x 44" x 31" Einfülltrichter inkl. automatischem Zuführband; 2. BTG Instruments Consistency Control Unit – MnCPM-1300 Typ HX/Q0/C2/5/10 Konsistenztransmitter; 3. Konusrefiner 75 PS; 4. Taiwan Pulp Molding Co. Cleaner Screen (2017) – 30 PS.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2004, jam operasional: 26.426 h, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: hidrolik, gaya punching: 20 t, hu Dujdpow E Emajfx Airju

Tahun pembuatan: 2018, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Machineseeker-20240611-002 Dsdpfxowhlr Ie Aireuu