Gergaji pita horizontal - semi-otomatis - rentang pemotongan putaran 301-349mm

MEP SHARK 331-1 NC 5.0 SPIDER

Kondisi: baru, Cutting capacity 300 mm Cutting capacity at 90 degrees: flat 330 x 260 mm Cutting capacity at 90 degrees: square 260 x 260 mm Cutting capacity at 45 degrees: round 260 mm Cutting capacity at 45 degrees: flat 270 x 200 mm Cutting capacity at 45 degrees: square 250 mm Cutting capacity at 60 degrees: round 180 mm Cutting capacity at 60 degrees: flat 170 x 170 mm Cutting capacity at 60 degrees: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 – 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1240 kg Dimensions (L x W x H) 1800 x 1900 x 1750 mm Features: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) - Equipped with additional semi-automatic function, for cuts from 0° to 60° to the left - WINDOWS “CE” based MEP 50 control and 7” touch screen display * Simple and fast setting of all machine parameters * With additional soft keys and backlit display * 10 programs, each with max. 9999 pieces and max. 9999.9 mm in length - Material feed with stepper motor via ball screw * Single stroke of 600 mm, repeatable for any length * Accuracy of ± 0.1/600 mm - Feeder with protective cover and safety limit switch - Precise setting of cutting feed rate with indication in mm/min - Positioning of saw head and movement of feeder via joystick - Automatic detection of cutting start - Large dimensioned, adjustable cast steel deflection wheels - Saw blade tension with tension control and display indication - Carbide blade guides for highest cutting precision - Automatic monitoring of cutting load - Quick-adjust vice * With interchangeable clamping and stop jaws - Large, side-mounted chip tray and coolant tank * Equipped with 2 electric pumps for band lubrication and cooling * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating manual in German Info from manufacturer: When installing this saw on a power network with residual-current circuit breaker (RCD), it should be all-current sensitive and not rated below 300 mA. Iedjxabwhepfx Aahjtr SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Kondisi: baru, Swing diameter 760 mm Turning length 3000 mm Swing diameter over cross slide 520 mm Center height 380 mm Spindle speeds 17 steps (7.5 - 1015) rpm Tailstock Morse taper 6 Quill stroke 225 mm Quill diameter 105 mm Spindle bore 132 mm Iodpfx Aoqv Iw Teahetr Longitudinal feed 0.039 - 18 mm/min Cross feed 0.02 - 9 mm/min Total power requirement 15 kW Machine weight approx. 4700 kg Space requirement approx. 4900 x 1650 x 1650 mm Equipment: - Coolant system - Machine lamp - Chip guard at the rear - Spindle guard - Chuck guard - Tool holder guard - Change gears *Special equipment: - 3-jaw chuck Ø 400 mm type 3204 / DIN6350, BISON - MULTIFIX quick-change tool post type C, incl. 4 tool holders - 3-axis digital readout DRO Newall - Foot pedal with CE brake function

Kondisi: baru, MEP Bandsaw SHARK 331-1 NC 5.0 Spider All MEP models available on request! Motor power: 2.2 kW Vise opening: 340 mm Blade dimensions: 3650x27x0.9 mm Weight: 1,240 kg Cutting speed: 15 - 100 m/min, infinitely variable Cutting capacity at 0°: 280 / 260x260 / 330x260 mm Cutting capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting capacity at 45° left: Cutting capacity at 60° right: 180 / 170x170 / 170x170 mm Cutting capacity at 60° left: Description Fully automatic hydraulic bandsaw Mitre cuts up to 60° to the left possible Saw band length: 3650x27x0.9 mm Single stroke: 600 mm (programmable up to 10 m) Easy-to-use touchscreen control Saw arm made from spheroidal graphite cast iron – robust and stable Required floor space: 3.4 m² Footprint: 1900 mm wide x 1800 mm deep Ijdpfx Aajchhdijhetr Please refer to the attached PDF document for further technical data.

Kondisi: baru, Cutting capacity 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: square 250 mm Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 180 mm Automatic feed 9999.9 mm Minimum feed 2 mm Minimum cutting diameter 5 mm Blade speed 15 - 100 m/min Vice opening 340 mm Saw blade dimensions 3650 x 27 x 0.9 mm Total power requirement 2.2 kW Weight 1240 kg Dimensions (LxWxH) 1800 x 1900 x 1750 mm Iedpfx Aoxaa Ewjahetr Equipment: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) - With additional semi-automatic function, for cuts from 0° to 60° to the left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * Simple and quick setting of all machine parameters * With additional soft keys + backlit display * 10 programs with max. 9999 pieces and max. 9999.9 mm length each - Material feed with stepper motor via ball screw spindle * Single stroke 600 mm repeatable, to cut any length * Accuracy of ± 0.1/600 mm - Feeder with protective cover and safety limit switch - Precise feed rate adjustment with indication in mm/min - Positioning of the saw head and movement of the feeder via joystick - Automatic detection of the cutting start point - Large, adjustable cast steel band wheels - Saw blade tension with tension control and indication on the display - Carbide blade guides for maximum cutting precision - Automatic monitoring of cutting load - Quick-adjust vice * With replaceable clamping and stop jaws - Large, side-extendable swarf tray and coolant tank * Fitted with 2 electric pumps for blade lubrication and cooling * Coolant gun for cleaning the machine - Swarf brush for cleaning the saw blade - Operating manual in German Manufacturer information: When installing this saw on a network with residual current circuit breaker (RCD), it should be all-current sensitive and not less than 300 mA.

Kondisi: baru, ex-demo-promotion--NEW No. 1 unit available for immediate delivery. CE certified warranty. The MACC SPECIAL 335 MS is a semi-automatic bandsaw suitable for cutting solid bars and small profiles, offering high performance and excellent precision. Its robust frame provides the necessary rigidity and accuracy to the cutting assembly. The blade is powered by a two-speed motor and a special gearbox with a hardened and ground bronze worm gear. The appropriately sized flywheels and robust blade guides are fitted with sealed bearings and adjustable carbide pads. Blade tensioning is managed via an electromechanical micro-switch, which is activated by rotating the blade. Safety features include an accident-prevention device on the flywheel covers and blade, complemented by a swiveling worktable for material support and a vice with rapid approach mechanism. Operation: The cutting cycle starts at the touch of a button: 1. the vice closes and the blade motor is activated; 2. the bow descends for cutting; 3. the bow returns to the start position; 4. the blade motor stops; 5. the vice opens. Manual cutting is also possible. Cutting speed (m/min): 38-77. Blade thickness (mm): 1.2. Cutting range: 45° left to 60° right. Adjustable stop for repetitive cuts. Band coolant electric pump: 0.06 kW. Cutting capacity at 0° (Round, Square, Rectangle): 260 / 250x250 / 220x330 mm. Cutting capacity at 45° left (Round, Square, Rectangle): 225 / 210x210 / 160x225 mm. Cutting capacity at 45° right (Round, Square, Rectangle): 215 / 200x200 / 160x210 mm. Cutting capacity at 60° right (Round, Square, Rectangle): 130 / 130x130 / 130x140 mm. Blade dimensions: 3010x27x0.9 mm. Weight [kg]: 415. Itsdeg S Ui Aepfx Aahor

Kondisi: sangat baik (bekas), Control: D.Electron Z 32 Center height: 220 mm Distance between centers: 1000 mm Swing diameter over bed: 440 mm Swing diameter over cross slide: 245 mm Travel - Z axis: 750 mm Bed width: 320 mm Spindle mount: CL 6" Spindle bore: 62 mm Spindle speeds: 0 – 2000 rpm Rapid traverse X/Z: 7 m/min Itedpfsd Sitkjx Aahor Tailstock quill travel (manual): 200 mm Tailstock quill diameter: 80 mm Tailstock taper: MK 4

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, kedalaman pengeboran: 1.250 mm, panjang total: 8.100 mm, lebar total: 6.300 mm, tinggi total: 4.300 mm, berat benda kerja (maks.): 7.000 kg, berat keseluruhan: 31.000 kg, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.100 mm, kecepatan spindel (maks.): 6.000 rpm, diameter bor: 36 mm, 4-Seiten-Komplettbearbeitung Schwenkbare Bohr- und Fräseinheit DCM Dynamische Kollisionsüberwachung CAM-Modell QCK (Quick Check Kinematics) Transferbohrzyklus (380-382) 90 Bar IKZ-Kühlsystem Zusätzlicher ATC-Turm 24-fach (4 x 6) HSK 63 Doppel-Spindel-Mutter-Konstruktion Sauberwassertank 1.650 L und Abwassertank 1.300 L Späneförderer Isdpjvn Sv Ujfx Aahotr Max. Bohrdurchmesser Stahl: 36 mm Bohrtiefe: 1.250 mm X-Achse Verfahrweg: 1.600 mm Y-Achse Verfahrweg: 1.250 mm Z-Achse Verfahrweg: 1.100 mm W-Achse Verfahrweg: 1.600 mm Tischbelastung: 7.000 kg Tischgröße L x B / oder Ø: 1.500 x 1.100 mm Spindelaufnahme: HSK-63Mk Spindelleistung: 23 kW Drehzahlen / Bereiche: 6.000 U/min Länge: 8.100 mm Breite: 6.300 mm Höhe: 4.300 mm Gewicht: 31.000 kg

Kondisi: sangat baik (bekas), Brand: KENT Model: KGS-250AHD Type: Tangential Working surface: 460 x 200 mm Longitudinal travel: 540 mm Cross travel: 260 mm Distance from spindle center to table: 490 mm Max. weight on table (including magnetic chuck): - 103 series: 250 kg - 818 series: 150 kg T-slot: 14 x 1 mm/N Table longitudinal speed: 5 - 23 m/min Handwheel cross feed: 1 division = 0.02 mm, 1 revolution = 4 mm Automatic cross feed per pass: 0.1 - 5.5 mm Automatic feed rate: 50 Hz - 820 mm/min; 60 Hz - 980 mm/min Grinding wheel dimensions: 180 x 13 x 31.75 mm Spindle speed: 50 Hz - 2850 rpm, 60 Hz - 3480 rpm Vertical handwheel: 1 division = 0.01 mm, 1 revolution = 2 mm Automatic downfeed increment: 0.002 - 0.02 mm Spindle motor: 2 x 2 HP X P Ijdpfjh Ha Ipsx Aahotr Elevation motor: NA kg x cm Hydraulic pump motor: 1 x 6 HP X P Coolant pump motor: 1/8 x 2 HP X P Cross feed motor: 1/5 x 6 HP X P Machine height: 1775 mm Machine dimensions: 3260 x 2460 mm Net weight: 1300 kg Gross weight: 1500 kg

Kondisi: bekas, Tahun pembuatan: 1992, translate-001 Itjdpfx Aofrvzvsahsr

Kondisi: baru, Tahun pembuatan: 2023, Pipe drilling machine, angled drilling machine, drilling automaton TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - manual material clamping - manual feed - max. pipe length 3,000mm (optionally 6,000mm) - positioning accuracy +/- 0.2mm - 10 stops (can be expanded as required) Itodpfx Aaelgvkiohor - manual loading and removal of material - drilling head swivel range +/- 50° - manual 360 degree pipe rotation device - drilling unit power 1 x 2.2 kW - motor speed 295 - 2950 rpm - speed display on touch panel - drilling unit lighting - integrated tool cabinet - round tube up to 114mm - square tube up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - double-post up to 100 x 15mm - flow drilling up to M12 - drilling diameter up to Ø 50mm