Gergaji pita

MEP SHARK 332-1 CCS

Kondisi: baru, trans-001 Gsdpfx Aeyv Na Sjclsbr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Godeychqzepfx Acljbr Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction connection diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, diameter 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller Sh 65, fixed sanding shoe Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Conveyor belt oscillation pneumatically Motorized workpiece thickness adjustment with LED display (increments of 0.1 mm) Units with emergency braking device Emergency stop button at infeed & outfeed Motor protection switch Infeed roller table extension with 2 idle rollers Automatic star/delta start Complete documentation Note for used machines: • Technical data subject to error and prior sale. • Quoted prices are ex works – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Kondisi: baru, Cutting diameter 300 mm Saw blade length 3320 x 27 x 0.9 mm Blade speed 40/80 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 670 kg Operating mode in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs via the unit’s own weight, is counterbalanced by a spring, and adjusted with a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feeding. Gsdsfg E H Tepfx Aclsbr Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector switch, emergency stop, thermal-magnetic protection, low voltage system 24 V) Electronic blade tension gauge with digital display Manual vice with quick locking Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory) Electric coolant pump for blade cooling and lubrication Chip removal brush Adjustable precision stops for repeated cuts of equal length Machine suitable for pallet truck transport Bimetal saw blade for solid and profile material Tools and operating instructions included.

Kondisi: baru, Model designation Shark 332-1 CCS Gsdpfegvquwox Aclebr

Kondisi: bekas, nomor mesin/kendaraan: 007984, 482bd3a4 Gjdpfxewqdbmo Aclebr

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, jam operasional: 180 h, Fungsionalitas: berfungsi sepenuhnya, panjang total: 8.000 mm, lebar total: 1.200 mm, tinggi total: 1.300 mm, jenis arus masuk: AC (pendingin udara), tegangan masuk: 400 V, daya: 10 kW (13,60 hp), SOEST Universal Surface Finishing Line for oiling, staining, lye treatment, patination, etc. Gsdpfx Aoyaiafecljbr Primarily for parquet surfaces up to 40 cm workpiece width. 1) RCR-400-L Reverse Roller Coater, for applying and removing surface products such as oils, stains, varnishes, etc. 2) VP-400-1B-2P-2B Brushing Machine with one brush, two pad discs, and another two brushes, for distributing and working in surface media or patinating into pores, and/or for removing, spreading, and distributing depending on the desired surface effects. 3) Accessories: two replacement application rollers, unused material pump, four spare brushes, various pad discs, and a pneumatic brush cleaning machine. This complete surface finishing line is engineered for professional industrial use and is configured with the highest level of equipment. A large range of accessories is included with the system, such as additional rollers and cleaning machines (see pictures!). Very robust construction, all motors are frequency-controlled (Siemens). Speeds are infinitely adjustable in forward and reverse operation. Maximum workpiece width approx. 410 mm. The system is in very good condition, used only about 180 operating hours and is therefore considered as new. This finishing machine served only as an auxiliary line in a parquet production facility and was used exclusively for specific surface techniques, explaining the low operating hours—meaning it was used only occasionally between 2019 and 2022. In 2023, our company downsized, and since then the equipment has been stored and is immediately available, thus it remains in almost mint condition! This equipment will no longer be used in our operations, which is why it is up for sale. The original purchase price in 2019 was approx. €87,000, and the current sale price is negotiable! Inspection of the surface finishing system is possible by prior arrangement. If required, we can also offer 10 drying rack trolleys for sale with this system. (YouTube video is for demonstration purposes only and shows a similar system configuration!)

Kondisi: baru, Tahun pembuatan: 2024, Lebar kerja: 600 mm Tinggi kerja: 5 mm hingga 300 mm Panjang benda kerja minimal: 250 mm Agregat: 2 1. Agregat pemotong gergaji Random System: Tampilan potongan gergaji 2. Sikat: Tynex, diameter 210 mm Pengaturan tinggi: elektrik Indikasi tinggi: digital Kecepatan umpan: 4 - 14 m/menit Daya motor agregat gergaji: 1,1 kW Daya motor sikat: 4 kW Daya motor pengumpan: 0,37 kW Gsdoupy Spjpfx Aclsbr Panjang mesin: 1400 mm Lebar mesin: 1500 mm Tinggi mesin: 1600 mm Berat: 700 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Mesin pembuat alur parket Costa Righi model Zefiro 2200 Gbsdpfxsx Rrqvo Acljr Jarak maksimum antara pisau luar: 2200 mm Pembukaan kerja efektif: 2400 mm Termasuk pengumpan sabuk dan rantai masuk Pisau termasuk

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, as-new condition (only 5,000 m² of parquet processed), compact oil application line comprising: Roller Application Unit: For application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity of 18 l/min Frequency inverter for variable speed of application roller Frequency inverter for variable speed of counter roller Transport belt speed variable: 3 to 14 m/min Stainless steel recovery trays Pad + Brush Unit: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed variable: 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions (L x D): 300 x 160 mm Gbodsx Ah A Aopfx Aclor Quick-change system for brushes UV / LED Unit: Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED output = 12 Watt/cm² Incl. ventilation fan Kevlar fabric transport belt Transport belt speed variable: 3 to 14 m/min Outfeed Conveyor Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed variable: 3 to 14 m/min Used Machinery Notice: • Technical details and intermediate sale subject to change. • Listed prices are ex-site, loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines on-site. • Special agreements are valid only if provided in written form. (We only respond to inquiries containing your address and telephone number!)

Kondisi: sangat baik (bekas), COMPLETE 4-SIDE FORMAT PROCESSING AND EDGE-BANDING LINE, max. working width 2500 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X04004A) Feeding gantry (with 2 loading stations) "BARGSTEDT" TBH 500/D/30/14 X04004B) Rotating device (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDR31/25/12 X04004C) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004D) Separation station "BARGSTEDT" X04004E) Double-sided sizing and edge-banding machine "HOMAG" Model KFR 620/19/QA/25 X04004F) 1st Drilling machine "WEEKE" Model BST 500 D X04004G) 2nd Drilling machine "WEEKE" Model BST 500 D Gjdpfxelikvhs Aclebr X04004H) Rotating device (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004M) Stacking gantry (with 2 unloading stations) "BARGSTEDT" Model TSP 420/40/30/12 BA