Mesin gergaji pita

MEP SHARK 332-1 NC 5.0

Bandsaw blade dimensions: 3650 x 27 x 0.9 mm
Cutting speed: 15 - 100 m/min
Kdjdpfx Aeyv Nylog Rsi
Vise opening: 335 mm
Cutting capacity at 90°: round 300 mm
Cutting capacity at 90°: square 260 mm
Cutting capacity at 90°: flat 330 x 260 mm
Cutting capacity at 45°: round 260 / 200 mm
Cutting capacity at 45°: square 250 / 180 mm
Cutting capacity at 45°: flat 270 x 200 / 200 x 160 mm
Cutting capacity at 60°: round 180 mm
Cutting capacity at 60°: square 170 mm
Cutting capacity at 60°: flat 170 x 170 mm
Total connected load: 2.2 kW
Weight: 1,105 kg
Dimensions: 2700 x 2300 x 1800 mm

Electrohydraulic fully automatic bandsaw with multi-microprocessor control and additional semi-automatic, semi-automatic dynamic, and manual operation modes.

- Automatic cycle (cuts from 0° to 60° left). CNC automatic operation with two controlled axes, allowing programming of up to 1000 different cutting programs with varying cut lengths and quantities for identical material dimensions.
- Semi-automatic, semi-automatic dynamic, and manual cycles (cuts from 45° right to 60° left)
- Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button)
- Manual or semi-automatic dynamic cycle allows cuts to be made directly, without programming.

Some features:

- New fieldbus communication system (Modbus protocol)
- Display with 20 characters x 4 lines for technical parameters such as:
- Saw blade speed
- Number of programmed and performed cuts
- Blade thickness
- Feed length
- Cutting time
- Ammeter
- Blade tension
- Indication of approx. 100 diagnostics and warning messages, all in the operator’s language
- Display and recording of alarms and error messages, with the ability to review occurred incidents
- Automatic parameter adjustment via control system when a new drive or inverter is installed
- Electronic inverter for continuous adjustment of the blade speed from 15 to 100 m/min
- Next-generation hydraulic control unit—high performance with low energy consumption
- New 600 mm material feeding system using stepper motor and ball screw mounted on opposed bearings
- Programmable stroke range for the saw arm directly from the control panel to adjust to the cutting material
- Electronic blade tension control
- Automatic monitoring of cutting load via a servo valve mounted directly on the cylinder
- Coolant tray (equipped with 2 electric pumps for lubrication and cooling of the saw blade) integrated into the machine base
- Chip drawer (can be replaced by a chip conveyor—see special accessories)
- Prepared for installing a minimum-quantity lubrication system for the saw blade (optional), in addition to the standard emulsion oil lubrication system
- Chip removal brush
- Machine designed for transport by pallet truck
- Bi-metal bandsaw blade suitable for solid and profile materials.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.