Mobil station wagon beratap tinggi

Mercedes-Benz Unimog 406 Ruthmann

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel (X-axis): 650 mm Cross travel (Y-axis): 510 mm Vertical travel (Z-axis): 475 mm Dkedjwuurwopfx Aftei T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm Between spindle centre and underside of counter support: 160 mm Feeds Longitudinal feed: 0–4000 mm/min Cross feed: 0–4000 mm/min Vertical feed: 0–1500 mm/min Rapid Traverse Longitudinal rapid traverse: 4000 mm/min Cross rapid traverse: 4000 mm/min Vertical rapid traverse: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55–3000 rpm Head, swivelling: 0–140° Quill Feed Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Including (not a complete list): • ABENE milling machine • Heidenhain control • Toolholder set • Coolant pump • Levelling feet • Mounting block • Complete operating documentation Precise scope of delivery as shown in photo gallery.

Kondisi: bekas, Fungsionalitas: tidak berfungsi, Tahun pembuatan: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the rear ramp of the vehicles, which allowed the military to transport a truck or other military equipment. The XV following LARC indicates the maximum transportable weight: 15 tonnes. The vehicles are constructed from aluminium and have the following precise dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each producing 300 hp. This enabled the vehicles to achieve a top speed of 48 km/h on land and 9.5 knots on water, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tonnes. The maximum permissible weight is 35.5 tonnes. Dkodpfx Afexcgy Hetei The previous owner intended to convert the boats to a fully electric drive system to organise sightseeing tours on the Wadden Sea. Approximately €200,000 was invested, however the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. It is not known exactly what work still needs to be completed.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Spinner TS66L-SMC Mesin Bubut CNC dengan spindle tambahan Tahun pembuatan: 2008 Kontrol: FANUC 18i-TB Diameter pembubutan: 400 mm Panjang pembubutan: 640 mm Diameter batang: 66 mm Diameter putaran: 685 mm Perjalanan sumbu X: 240 mm Dksdpfx Asxptz Reftji Perjalanan sumbu Z: 640 mm Kecepatan spindle utama: 4000 rpm Kecepatan spindle tambahan: 5000 rpm Lubang spindle utama: 73 mm Lubang spindle tambahan: 43 mm Sumbu C: 0,001° Kepala turret: 12 posisi, semuanya digerakkan Mounting alat: VDI 30 Alat bertenaga: 9 kW Kecepatan alat bertenaga: 4000 rpm Feed rate tanpa tingkat: 500 mm/menit Gerak cepat sumbu X: 18 m/menit Gerak cepat sumbu Z: 24 m/menit Daya penggerak motor spindle: 19 / 14 kW Berat mesin: sekitar 5,7 t Kebutuhan ruang: sekitar 2,35 x 1,65 x 1,85 m

Kondisi: baik (bekas), Tahun pembuatan: 1970, For sale: Hilgeland upsetting machine, model CH5AL. The machine is in perfect technical condition. Machine weight approx. 20 tons. The upsetting machine comes with extensive tooling. Loading is provided. Maximum diameter of normalized bolt: 16 mm. Maximum length: 200 mm. Dkodpeu Szucsfx Aftei

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 430 mm, lubang spindel: 80 mm, panjang pembubutan: 1.500 mm, diameter pembubutan: 430 mm, gores kuas bulu: 150 mm, diameter quill: 70 mm, kecepatan spindel (min.): 3.000 rpm, lebar tempat tidur: 350 mm, panjang total: 1.900 mm, lebar total: 1.500 mm, tinggi total: 1.600 mm, daya motor spindle: 11 W, berat keseluruhan: 3.500 kg, kecepatan rotasi (min.): 1 rpm, kecepatan rotasi (maks.): 3.000 rpm, diameter chuck tiga rahang: 250 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Die Seiger SLZ 420K ist eine konventionelle Drehmaschine, die sich durch ihr robustes Graugussbett, präzise Führungsbahnen und digitale Unterstützung auszeichnet. Sie ist besonders geeignet für die Einzelteilfertigung und Reparaturarbeiten. Abmessungen und Leistungsdaten • Umlaufdurchmesser über Bett: 430 mm • Umlaufdurchmesser über Planschlitten: 220 mm • Spitzenweite: 1.500 mm • Bettbreite: 350 mm Spindel und Antrieb • Spindeldurchlass: 80 mm • Spindelaufnahme: DIN 55027, Größe 6 • Spindel-Lagerdurchmesser vorn: 110 mm • Hauptantrieb: 11 kW • Drehzahlbereich: 1–3.000 min⁻¹ Reitstock • Pinolendurchmesser: 70 mm • Pinolenhub: 150 mm • Kegelaufnahme: MK 5 Steuerung und Ausstattung • Anzeige: Heidenhain Positip 8016 Digitalanzeige • Maßstäbe: Heidenhain-Maßstäbe auf X- und Z-Achse • Vorschübe: V-konstante und regelbare Vorschübe über Potentiometer • Eilgang: In X- und Z-Achse verfügbar • Handräder: Mechanische Handräder für den manuellen Betrieb Dkedpfx Aexr U E Aoftoi • Maschinenbett: Hochwertiges, verwindungssteifes Graugussbett mit gehärteten und präzisionsgeschliffenen Führungsbahnen Die Heidenhain Positip 8016 ist ein digitales Messsystem mit Touchscreen-Bedienung, das sich für handbediente Fräs-, Bohr- und Drehmaschinen eignet. Das Display bietet vielfältige Funktionen zur Produktivitäts- und Genauigkeitssteigerung. Hauptmerkmale • Touchscreen-Bedienung: Robuster 12,1-Zoll Farb-TFT-Touchscreen, auch mit Handschuhen bedienbar • Mehr-Achs-System: Steuerung von bis zu sechs Achsen, davon vier als Standardachsen (linear, winkel- oder gekoppelte Achsen) und zwei optional • Umfangreiche Funktionen: Bohrbilder, Werkzeugradiuskompensation, Schnittdatenrechner und Positionsspeicherung • Zielmaß-Funktion: Ermöglicht das schnelle und exakte Anfahren der nächsten Position durch Arbeiten auf Sollmaß • Programmierbar: Wiederkehrende Bearbeitungsschritte können als Programme gespeichert werden, was die Kleinserienfertigung beschleunigt • Schnittstellen: Ethernet- und USB-Anschluss für Datenimport und -export • Robustes Design: Besonders für den Werkstatteinsatz konzipiert, mit stabilem Aluminiumgehäuse und passiver Kühlung.

Kondisi: baik (bekas), Tahun pembuatan: 2000, Swing diameter 340 mm Turning length 2000 mm Control unit FAGOR 8055 Max. workpiece diameter over bed 550 mm Spindle bore 108 mm Spindle speeds - stepless up to 2,500 rpm Drive power 16.5 kW Quill stroke 220 mm Quill diameter 100 mm Total power requirement 19 kW Machine weight approx. 4,300 kg Space required approx. 4,300 x 1,600 x 1,800 mm This EMCO E 300x2000 cycle lathe is offered including complete accessories. Description: - Coolant system - 1 steady rest, open, 20–145 mm - 1 steady rest, closed, 15–185 mm - 1 faceplate - 1 3-jaw chuck - 1 wedge bar chuck D=400 mm - Parat 4-position tool holder Dodpfx Aovwgpboftjki - Various tool holders

Kondisi: sangat baik (bekas), Control: Heidenhain Positip 850; Tool holder: SK 40; Hydraulic tool clamping; Dedelkgvbepfx Afteki Quill stroke: 100 mm; Table: 800x480 mm; Travel: x-600 mm, y-400 mm, z-400 mm; Rapid traverse; Feed rates: 63-800 mm/min (18 steps); Spindle speeds: 63-3150 rpm (18 steps); Accessories: Coolant system, collet chuck including collets.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 4.500 h, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 090119, Origin of manufacture: CE - Germany Voltage: 400V Net weight: 7,500 kg Dimensions: 2.9 x 2.3 x 2.3 m Operating hours: 29,731 h - Working hours: 4,500 h TECHNICAL DATA AXES Maximum travel X-axis: 400 mm Maximum travel Y-axis: 300 mm Maximum travel Z1-axis: 475 mm Maximum travel Z2-axis: 475 mm B-axis rotary range: 0.0001 – 360° C1/C2-axis rotary range: 0.0001 – 360° WORKPIECE Maximum cubic dimension: 80 x 80 x 80 mm Maximum weight: 5 kg TURRET HEAD Number of positions: 24 Number of controlled positions: 18 Number of fixed positions: 6 Maximum tool holder (round): Ø 20 mm Maximum tool holder (square): 16x16 mm (20x20) Maximum turret head trajectory over tool tip: 500 mm Rotating tool speed: 1–9,000 rpm SPINDLE Maximum speed: 6,000 rpm Maximum bar diameter: Ø 42 mm Maximum clamping chuck diameter: 140 mm BAR PROCESSING Maximum bar length for bar feeder: 1,000 mm Maximum workpiece size for bar gripper: Ø42 x length 100 mm Maximum diameter for collet gripper: 42 mm Clamping cylinder pull and push force: 20,000 N FEED FORCES Feed force X-axis: approx. 895 daN Feed force Y-axis: approx. 895 daN Feed force Z1-axis: approx. 895 daN Feed force Z2-axis: approx. 895 daN Rapid traverse axes X/Y/Z: 20 m/min Tool control motor torque: 2.4 Nm Djdpfxsht Hg Do Aftski Spindle S1 / Spindle S2: 70 Nm COOLING (Flow rate) Output of immersion pump in chip conveyor: approx. 10 l/min at 4.5 bar 80 l/min at 3.2 bar 150 l/min at 0.7 bar High pressure pump flow rate in conveyor: 10 l/min at 13.2 bar 50 l/min at 9 bar 90 l/min at 1 bar Lubricant volume in chip conveyor: approx. 134 L Coolant volume in cooling unit: 45 L CONTROL: Siemens 840D WORKING ACCURACY Resolution X/Y/Z: 0.1 µm Resolution B-axis: 0.0001° Resolution C-axis: 0.0001° Positioning accuracy: 5 µm Accuracy: 0.6 µm Maximum runout error: 0.5 µm ELECTRICAL Spindle 1 / Spindle 2 (at 100%): 11 kW Spindle 1 / Spindle 2 (at 40%): 15 kW Feed motor axes X/Y/Z1/Z2: 1.3 kW B-axis: 1.3 kW Tool control: 2.3 kW Hydraulic pump: 7.5 kW Hydraulics return: 0.75 kW Cooling unit fan 1 / 2: 0.18 kW Cooling unit circulation pump: 1.1 kW Cooling unit compressor: 2.2 kW Chip conveyor: 0.25 kW Emulsion pump 1: 1.1 kW Emulsion pump 2: 2.2 kW Control voltage: 400 V Network frequency: 50Hz (60Hz optional) Control circuit voltage: 24V DC Total power consumption: 35 kW Rated current: 63A Connection: Network TM / TT / IT PNEUMATICS Maximum operating pressure: 10 bar Normal operating pressure: 6 bar Minimum operating pressure: 5 bar Air output: approx. 150 L/min Solenoid voltage: 24V DC Oil mist tank capacity: 12 L Quality standard: 2 according to Pneurop 6611 NOISE LEVEL Normal operation: 78–80 dB All technical data are provided subject to errors or omissions and are non-binding. Inventory No. 2321018, Machine consisting of: Chip conveyor Prepared for bar loader connection Tool holders: 6 stationary drills ER32 8 turning tool holders 5 driven tool holders ER32 4 driven tool holders ER25 6 driven tool holders ER20

Kondisi: baik (bekas), Rolling pressure: 220 kN Workpiece diameter: 3 mm min; 70 mm max Pitch: 6 mm max Knurling pitch: 2.25 mm max Roller width: 160 mm max Dsdpfx Afovyyyxotjki Roller diameter: 133 mm min; 170 mm max Roller shaft speed: 24, 30, 38, 45, 62, 72, 90, 114 rpm Roller shaft diameter: 54 mm standard; 69.85 mm special Distance between shafts: 135 mm min; 230 mm max Working stroke: 15 mm max Feed rate: from 0.5 mm/s up to 6 mm/s Rolling time: from 0.1 s up to 100 s Pause time: from 0.1 s up to 100 s Main motor: 5.5 kW Electrical power consumption: 8.6 kW Tank capacity: 130 L Approx. weight: 2100 kg

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), A DMT lathe is available. Distance between centers: 1000 mm, swing over bed/cross slide: 420 mm/210 mm, bed height: 340 mm, spindle bore: 64 mm, spindle diameter: 115 mm, spindle speed: 4000 rpm, quill diameter: 60 mm, quill stroke: 140 mm, cross slide width: 210 mm, cross slide length: 640 mm. Machine dimensions (X/Y/Z): approx. 2150 mm/1150 mm/1700 mm, weight: approx. 1800 kg, control: Heidenhain, operating hours: approx. 300 h. Documentation available. An on-site inspection is possible. Dkodpfowtg H Rex Aftei