Empat Gulungan - Mesin Bending Lembaran Logam
MG EH 306 A/S

Tahun pembuatan

2001

Kondisi

Bekas

Lokasi

Ahaus

Empat Gulungan - Mesin Bending Lembaran Logam MG EH 306 A/S

Tampilkan peta

Data mesin

Nama mesin:: Empat Gulungan - Mesin Bending Lembaran Logam

Pabrikan:: MG

Model:: EH 306 A/S

Tahun pembuatan:: 2001

Kondisi:: sangat baik (bekas)

Harga & Lokasi

Lokasi:: 48683 Ahaus

Hubungi

Rincian penawaran

ID iklan:: A20888292

Nomor referensi:: 1125-9401300

Pembaruan:: terakhir pada 07.01.2026

Deskripsi

Sheet width 3100 mm
Sheet thickness 6.0 mm steel
Pre-bending 4.0 mm steel
Top roll diameter 200 mm
Side roll diameter 165 mm
Lower roll diameter 190 mm
Bending speed approx. 5.0 m/min
Djdpfx Asx Sr Dfsdgskg
DIGI control system
Oil capacity 80.0 liters
Voltage 380 V
Total power requirement 6.0 kW
Weight 6000 kg
Dimensions L-W-H 5250 x 1500 x 1400 mm
Very good condition (!!)
Current new price approx. 85,000 euros
Special price on request

Equipment:
- Robust electro-hydraulic 4-roll plate bending machine
* 4-roll concept provides the widest range of bending and rounding options
- MG swiveling control panel
* Operation and control of all rolls and machine axes
* Digital position display
* Manual operation via joysticks
- Two central rolls are directly driven by hydraulic motors
- Conical rolling possible via tilting of the rolls
- Parallelism of side rolls ensured by torsion shafts
- Double-sided pre-bending
- Diameters of up to 1.1 times the upper roll diameter are possible
- Forged and hardened rolls with a hardness of 53-55 HRC
- Low-maintenance, stable machine concept
- Continuous lubrication of all bearings
- Sturdy welded steel construction
- Electro-hydraulic drop-end for easy removal of pipes
- Manometer / Pressure gauge for the rolls
- Safety device (safety cord with switch unit)
- Operating instructions (PDF)

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2011

774 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 5939 ... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Trittau

10.978 km

TEKAN REM
EHTVariopress 125-3550

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, gaya penekanan: 125 t, Hydraulic Press Brake Make: EHT Model: VARIOPRESS 125-3550 Year: 1998 Technical Data Manufacturer: EHT Model: VARIOPRESS 125-3550 Year of construction: 1998 Pressing force: 125 t Working length: 3,550 mm Frame gap: 2,550 mm Throat depth: 300 mm Stroke: 240 mm Installation height: 640 mm Oil volume: 250 L Dimensions: approx. L 3.90 x W 1.80 x H 3.00 m Weight: approx. 12 t Equipment • Control: Cybelec DNC 80 2D graphics • Automatic upper tool clamping • Lower tool clamping 90 mm and 13 mm Dodpfx Aer Epr Uedgokg • Controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 • Motorized crowning • 6x segmented V-block matrix, 3,500 mm long: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° • Straight punch, H 350 mm / approx. 70°, length 3,060 mm, segmented All information without guarantee. A powered demonstration is possible at any time in our showroom.

Lihat detail

Iklan kecil

4 gulungan lentur hidrolik DURMA HRB-4 3008

Austria

10.686 km

4 gulungan lentur hidrolik
DURMAHRB-4 3008

Hubungi

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Dedpfx Adod Ab H Hogokg Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Lihat detail

Iklan kecil

Mesin tekuk bundar lembaran logam 3-roll Hydr. OMCCA HSI 3000 x 4

Rödermark

11.160 km

Mesin tekuk bundar lembaran logam 3-roll Hydr.
OMCCAHSI 3000 x 4

Hubungi

Tahun pembuatan: 1991, Kondisi: baik (bekas), nomor mesin/kendaraan: 07282, Offer 22336 Technical Data: Dkjdpfsmdqllex Adgjg - Max. working width: 3030 mm - Max. sheet thickness without pre-bending: 4 mm - Max. sheet thickness with pre-bending: 3 mm - 3 driven rollers - Roller diameter, top / bottom: 205 / 185 mm - Working speed: m/min - Drive – brake motor: 400 V / 7.5 kW - Required space (approx.): W 5500 x D 1400 x H 1300 mm - Weight (approx.): 4.7 t - With pre-bending function - Rear roller adjustable at an angle - Swing-out bearing for top roller - Extended roller ends for mounting profile rollers - Forward and reverse operation - Separate control panel

Lihat detail

Iklan kecil

Hidrolik mesin pembengkok empat rol DAVI MCB 4000 x 6/4 mm

Kreuztal

11.194 km

Hidrolik mesin pembengkok empat rol
DAVIMCB 4000 x 6/4 mm

Hubungi

Kondisi: baik (bekas), Technical Data: Working width: 4050 mm Maximum bending capacity: 6.0 mm Maximum pre-bending: 4.0 mm Top roll diameter: 210 mm Side lower roll diameter: 210 mm Central lower roll diameter: 210 mm Conical bending device by tilting both side rolls Hydraulic drop-end bearing Swiveling control panel with digital display Dimensions (Length x Width x Height): approx. 6900 x 2300 x 1800 mm Net weight: approx. 14 tons Djdpfx Adowkaalegokg The seller is not liable for typographical or data transmission errors. The machine’s visual appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Lihat detail

Iklan kecil

Tekan rem SafanDarley H Brake 240 4100 TS1

Drachten

11.270 km

Tekan rem
SafanDarleyH Brake 240 4100 TS1

Hubungi

Iklan kecil

Mesin tekuk lembaran logam - 4 rol FALKEN 4 R HMS 1550 x 150

Ahaus

11.235 km

Mesin tekuk lembaran logam - 4 rol
FALKEN4 R HMS 1550 x 150

Hubungi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Sheet width 1550 mm Dodpsxabkbofx Adgekg Sheet thickness 6.5 mm Bending capacity 4.5 mm Upper roll diameter 150 mm Side roll diameter 130 mm Lower roll diameter 150 mm Max. distance between upper and lower roll 20.0 mm Total power requirement 2.2 + 1.5 kW Machine weight approx. 2370 kg Dimensions L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW Never been in use (!!) Special price on request Equipment: - Electro-hydraulic 4-roll plate bending machine * with driven upper and lower roll * robust welded construction - Range of application: * light to heavy sheet metal processing (Steel/Aluminium/Stainless steel) - Electro-hydraulic adjustment of lower and side rolls - Linear guide for side rolls - Upper roll driven by heavy-duty electric motor and planetary gearbox - Mobile, separate control panel - Hardened rolls SAE 1050 (CK 45) - Conical bending device - 3-axis digital display for precise roll positioning - Electro-hydraulic drop end - Operating manual (PDF)

Lihat detail

Iklan kecil