LPG vágóberendezés fúrással/menetvágással
MicroStep CombiCut GBk 6001.20

Name: MicroStep CombiCut GBk 6001.20
Brand: MicroStep
Price: 49900 EUR
Availability: InStock

EXW harga tetap ditambah PPN

€49.900

Tahun pembuatan

2022

Kondisi

Bekas (berfungsi sepenuhnya)

Lokasi

Bad Wörishofen Jerman

LPG vágóberendezés fúrással/menetvágással MicroStep CombiCut GBk 6001.20

Data mesin

Nama mesin:: LPG vágóberendezés fúrással/menetvágással

Pabrikan:: MicroStep

Model:: CombiCut GBk 6001.20

Tahun pembuatan:: 2022

Kondisi:: sangat baik (bekas)

Fungsi:: berfungsi sepenuhnya

Jam operasional:: 650 h

Harga & Lokasi

EXW harga tetap ditambah PPN

€49.900

Lokasi:: Messerschmittstraße 2, 86825 Bad Wörishofen, Deutschland

Hubungi

Rincian teknis

Jangkauan kerja:: 6.000 mm

Ketebalan lembaran (maks.):: 150 mm

Ketebalan pelat baja (maks.):: 150 mm

Panjang meja:: 6.000 mm

Lebar kerja:: 2.000 mm

Perlengkapan:: dokumentasi / manual

Rincian penawaran

ID iklan:: A22006578

Pembaruan:: terakhir pada 17.06.2026

Deskripsi

Used Microstep CombiCut 6001.20 for applications up to 150mm mild steel

The system is equipped as follows:

CombiCut gantry, dual-side drive
Oxy-fuel torch support, acetylene up to 150mm cutting capacity
Piercing, fully automatic

Drilling with 10.3 kW drilling support
Dual-side guided hold-down
Drilling up to 30mm diameter
Thread cutting up to M20
Countersinking according to drilling diameter
Includes calibration unit for drilling tools
Nwjdpoy Uw Hwsfx Adiei

All tools and carriages on the gantry are powered.

Conversion to plasma (straight) is possible!

Tool changer mounted at the table entrance for 6 tools, SK40 holders (not included)

Flame-cutting table 6000 x 2000mm, suitable for plates up to 150mm
table is cleaned and ready for immediate use (consists of 2 sections)
table features electronic flap control
Connection to standard extraction system possible; this can be offered optionally.

External machine control panel with 24" monitor

Control cabinet travels with the gantry for minimal trailing cables—very maintenance-friendly

Guides:
Milled S49 rails with helical-rack pinions

The machine has been comprehensively tested and inspected. All functions are present and ready for use.

The system includes an Asper license (CAM software) on the machine and can be network-connected.
Office licenses are not included!

We can offer the system with installation and commissioning services.

If installed by us, the system comes with an operational guarantee.
Additionally, if installed by AK Industry, the machine comes with a 3-month warranty.

Inspection possible at any time!

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Dokumen

22006578-01.pdf
22006578-02.pdf

Penyedia

Terdaftar sejak: 2020

4 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 8247 ... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Mesin pemotong plasma portal CNC Zinser 2425-I/3600 Fasenaggregat

Jerman

11.023 km

Mesin pemotong plasma portal CNC
Zinser2425-I/3600 Fasenaggregat

Hubungi

Kondisi: bekas, Tahun pembuatan: 2017, Mesin Pemotong Plasma CNC (Unit Pemotong Miring) Produsen: Zinser Tipe: 2425-I/3600 Tahun Pembuatan: 2017 Nodpew Rpvbjfx Adiowi Kontrol CNC: 5010 Panjang Lintasan: 11 m Meja Pemotongan dengan sistem pengumpan berayun, termasuk sistem penyedotan Dimensi: 2.000 x 8.000 mm 1 Obor Plasma dengan sumber daya Hypertherm XPR300 konsol gas otomatis termasuk unit pemotong miring plasma yang berputar secara otomatis, Sistem Pemotong Miring 2015/350 Sistem Filter Downflow 3DFP9-SP Daya: 9 kW Dioda Laser 22726

Lihat detail

Iklan kecil

Erwitte

11.157 km

Mesin Pemotong Laser Profil
Tube, H, I,Profile Laser Cutting Machine13030HD 12000w - 20000w

Hubungi

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: listrik, jenis laser: laser serat, daya laser: 12.000 W, ketebalan lembaran (maks.): 30 mm, Perlengkapan: Penandaan CE, alat penukar nosel, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, Unterstützt das Schneiden von 12 m langen Stahlrohren. Nsdpfx Aow A H T Aodiswi Ausgestattet mit einem vollautomatischen kombinierten Be- und Entladesystem. Intelligentes One-Stop-System für Be- und Entladen sowie Schneiden, steigert die Produktionseffizienz um 200 %. Unterstützt mehrere Bearbeitungsprozesse wie Fasenschneiden, Verriegeln, Schneiden, Stanzen, Öffnen von Schweißlöchern, Schneiden von Schraubenlöchern, Markieren und Kennzeichnen. Laserleistung: 12.000 W – 20.000 W Verfahrweg X-Achse: 1.600 mm Verfahrweg Y-Achse: 1.900 mm Verfahrweg Z-Achse: 900 mm A-Achse Drehung: ±90° C-Achse Drehung: ±90° Verfahrweg U-Achse: 30 mm Verfahrweg V-Achse: 13.000 mm Positioniergenauigkeit: ±0,1 mm Max. Werkstückquerschnitt: 1.000 × 400 mm Max. unterstütztes Gewicht: 5 t Unterstützte Profile: H-Träger, U-Stahl, I-Träger

Lihat detail

Iklan kecil

Mesin pemotong plasma portal CNC Microstep MG 4501.20 BkP mit Bohraggregat

Jerman

11.023 km

Mesin pemotong plasma portal CNC
MicrostepMG 4501.20 BkP mit Bohraggregat

Hubungi

Kondisi: bekas, Tahun pembuatan: 2019, Mesin Pemotong Plasma CNC Portal Produsen: Microstep Tipe: MG 4501.20 BkP Tahun Pembuatan: 2019 Pengendali CNC Area Kerja: 2.000 x 4.500 mm Nwsdpfxeyay H Ao Adisi 1 x Obor plasma 2D dengan sumber daya Hypertherm XPR300, termasuk konsol gas Optimix 1 x Spindel pengeboran 26 kW hingga diameter 40 mm, termasuk pengubah alat otomatis 8 posisi 1 x Persiapan untuk pemasangan rotator (untuk pemotongan bevel) 1 x Program penataan (nesting) pada pengendali CNC ä22726

Lihat detail

Iklan kecil

Sistem pemotongan plasma portal CNC Microstep MG 16500

Jerman

11.023 km

Sistem pemotongan plasma portal CNC
MicrostepMG 16500

Hubungi

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), A complete CNC dual-gantry plasma cutting system by Microstep, equipped with oxy-fuel torch for nesting, bevel cutting, and pipe processing, is available. 1) Plasma cutting machine: Max. working length: 16,500 mm, max. working width: 2,500 mm, max. working width including nesting: 3,700 mm, max. material thickness for stainless steel/structural steel: 20 mm/40 mm, number of gantries: 2. Gantry 1: with a plasma rotator and Kjellberg HiFocus 280i neo plasma source. Gantry 2: fully automatic acetylene oxy-fuel torch, with option to equip a second torch carriage. Pipe cutting device: pipe diameter range: 30 mm - 700 mm, max. pipe length: 16,500 mm, operating hours: approx. 15,000 h. Nwjdswmqwyjpfx Adisi 2) Donaldson Cyclopeel DFPRO 16 extraction and filtration unit, air flow rate: 16,000 m³/h, filter elements: 16. Documentation available. On-site inspection possible. Expected to be available from late 2025/early 2026. Photos are from commissioning in 2014.

Lihat detail

Iklan kecil

Jerman

11.023 km

Kompresor sekrup
Atlas CopcoGA26VSD

Hubungi

Iklan kecil

Mesin pemotong plasma MicroStep MG 6001 20Prb + CH800P+HyperTerm HPR260

Grimhult

10.698 km

Mesin pemotong plasma
MicroStepMG 6001 20Prb + CH800P+HyperTerm HPR260

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, lebar total: 4.780 mm, panjang total: 8.200 mm, panjang meja: 6.400 mm, lebar meja: 2.167 mm, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 6.000 mm, lebar yang dibutuhkan: 6.380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB stick (USB 2.0): 1 Basic tool station type R (A, B axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Tube cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of filter unit to power distributor: 1 Power distributor for the system: 1 Integration of plasma source into CNC system HPR, HD, HT, HF, FF: 1 Drilling head MG - 22, max. drill 22 mm, max. tap 16 mm, 5.5 kW, Y, Z-axis: 1 Nsdewhk E Hjpfx Adiswi Cooling – ecological cooling system for drill: 1 6-tool linear magazine ISO 40 for automatic tool change PMB6: 1 Pipe cutting attachment RSV 100-500 HHP: 1 Grating for duct cover 880 mm, 1 m length: 6 Support rollers on rails RSV 100-500 HHP: 2 Rails for support rollers 1 m with 2 rails: 7 Chuck for square tubes up to 500 mm diameter, 4-jaw: 1 Signal light: 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x]: 1 HPR260 Automatic: 1

Lihat detail

Iklan kecil

Mesin gergaji pita BOMAR Individual 820.640 DGH

Iszkaszentgyörgy

10.508 km

Mesin gergaji pita
BOMARIndividual 820.640 DGH

Hubungi

Iklan kecil

Mesin pengepakan BVM Brunner Krimptunnel 8030

Weesp

11.361 km

Mesin pengepakan
BVM BrunnerKrimptunnel 8030

Hubungi

Iklan kecil

Mesin Cutting CNC Portal ESAB Combirex DX-4000

Jerman

11.023 km

Mesin Cutting CNC Portal
ESABCombirex DX-4000

Hubungi

Tahun pembuatan: 2015, Kondisi: siap digunakan (bekas), A CNC gantry-type flame cutting system by ESAB is available. Track gauge: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, rail length: 8000mm, rail height: 465mm, table height: 700mm, cutting speed: 24m/min, cutting table dimensions X/Y: 3100mm/6180mm. Cutting methods: oxy-fuel/plasma, torch: Cooljet-Pro, plasma power source: m3 202 EPP 202 GEN 2, plasma torch: PT-36. Filtration capacity: 9000m³/h, filter area: 180m², particle size: 0.1µm. The plasma source cooling unit needs to be repaired. Documentation is available. On-site inspection is possible. Nodpfxew Azu Ie Adiewi

Lihat detail

Iklan kecil

Sistem pemotongan plasma CNC ESAB SXE-P1 4000

Jerman

11.023 km

Sistem pemotongan plasma CNC
ESABSXE-P1 4000

Hubungi

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), A complete ESAB CNC gantry plasma cutting machine is available. Travel range X/Y: 12,000mm/4,000mm, max. workpiece dimensions X/Y: 12,000mm/3,000mm, max. steel thickness: 150mm, overall system dimensions X/Y/Z: approx. 15,000mm/5,200mm/1,500mm. System components: Kjellberg KWE 360 cooling unit, Kjellberg PGV 3 gas control box, and Kjellberg PBA-360 plasma connection. The machine has fire damage. Documentation is available. On-site inspection possible. Nodpfx Ajv Dkcfsdiswi

Lihat detail

Beriklan di sini