Mesin press bengkel hidrolik

MIOTAL® WHP 250

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. Blsdpfx Aaefxyhfj Ted The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: bekas, Pressing force 75 t Stroke 250 mm Clearance between uprights (longitudinal/lateral): 800 x 215 mm Installation height 170 - 885 mm Operating pressure 7.5 - 8.5 bar Machine weight approx. 0.45 t Dimensions (L x W x H): 1.2 x 0.8 x 2.1 m Hydraulic/pneumatic workshop press Cylinder can be moved laterally Bledsupxr Uspfx Aa Tsd Pneumatic foot pedal Winch for table height adjustment 2 press blocks included CE marking

Tahun pembuatan: 2024, Kondisi: baru, oris- Extruder MINI ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 min⁻¹ Screw axial pressure [bar]: 300 (continuous operation), 350 (maximum) Drive: Three-phase motor with frequency converter Drive output [kW]: max. 2.5 Reduction gearbox with integrated thrust bearing Blsdpfx Aohx Elfsa Tjd Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590* Electrical connection values: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control: electric resistance heating bands with mica insulation Max. processing temperature [°C]: 300 Control cabinet and control panel The electrical installation of the extruder is housed in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the buyer, and a chiller unit for water cooling is not included in the offer. Extruder tooling is not included in the offer.

Kondisi: baru, Tahun pembuatan: 2025, kapasitas angkut: 20.000 kg, 20 ton container rotator, roller stand, complete set 380 V, infinitely adjustable speed from 200 to 1000 mm/min. Suitable for diameters from 500 mm to 4000 mm Roller diameter: 300 mm x 140 mm Support roller temperature resistance: 100°C Dual synchronized drive Bodpfxsifgu Uj Aa Told AC motor, 380V 750 W With hand and foot remote control, complete set

Kondisi: baik (bekas), Tahun pembuatan: 1999, nomor mesin/kendaraan: 108401 23-D, Penawaran 25318 Data Teknis: - Mesin gergaji pita manual - Ukuran pisau pita: 2375 x 20 x 0,9 mm - 2 kecepatan pemotongan: 33 / 66 rpm - Kapasitas penjepitan maks.: 205 mm - Sudut kemiringan kiri + kanan: 30° - Area pemotongan – 90°: bulat 160 mm, persegi 160 mm, datar 200 x 100 mm - Area pemotongan – 45° kiri + kanan: bulat 140 mm, datar 140 x 60 mm - Penggerak: 400 V / 1,5 / 1,8 kW Blodpoxta N Asfx Aa Tjd - Sistem pendingin - Jalur rol keluar dengan stopper: 3000 mm - Jalur rol masuk: 1500 mm - Berat: sekitar 350 kg - Kebutuhan tempat: sekitar L 1100 x T 1700 x P 1550 mm

Kondisi: bekas, Tahun pembuatan: 1998, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular Saw band dimensions: 2965 x 27 x 0.9 mm Table height: mm Band speed: 37 / 76 m/min Blsdpfsu Sbpvjx Aa Tsd Total power requirement: 1.0 kW Machine weight: approx. 0.38 t Required space: approx. 1.0 x 1.6 x 1.4 m Double mitre bandsaw

Tahun pembuatan: 1967, Kondisi: baik (bekas), nomor mesin/kendaraan: 7011/C, Table clamping surface: 310 x 1400 mm Table travel x-axis: approx. 950 mm Table travel y-axis: 325/345 mm Table travel z-axis: approx. 500 mm Spindle speeds: 20 - 1500 rpm Bledpfx Ajd Rxw Hja Tsd Feeds longitudinal & cross: 18 - 620 mm/min Feeds vertical: 18 - 620 mm/min Electrical connection: 380 V kW Space requirement: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg

Kondisi: baru, Tahun pembuatan: 2024, Protec welding turning table with 5000 kg load capacity. Speed infinitely adjustable from 0.05 to 0.5 rpm. Handheld remote control. Height: 600 mm. Diameter: 1500 mm. Foot pedal remote control available at extra cost. Bodpfeid Szcjx Aa Teld

Kondisi: bekas, de-to-hu Bledpfov Rgzwex Aa Tod

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, diameter putar di atas sled silang: 340 mm, panjang pembubutan: 2.000 mm, diameter pembubutan: 570 mm, lubang spindel: 83 mm, Weiler Voest Alpine E50 Drehmaschine Inklusive 3-Backenfutter und 6 Multifix-Werkzeughaltern Blsdpfx Aasn Hp T Ae Tod