Mitutoyo QS250Z CNC Vision Measuring Machine – tahun pembuatan 2017 – termasuk perangkat lunak & aks

Mitutoyo QS250Z CNC Vision

Kondisi: bekas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle head strokes (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of live tool positions on the turret: 6 - Max. diameter at subspindle: 12.7 [mm] - Subspindle rotational speed: 12,000 [rpm] Ijdpfxouhav De Al Doih - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and subspindle - Brake for main spindle and subspindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various static and driven tool holders

Tahun pembuatan: 1988, Kondisi: baik (bekas), Carlo Salvi, modelo 780/SV, cabezal de una matriz y dos golpes. Diámetro máximo de corte: 6,35 mm. Longitud máxima de corte: 97 mm. Longitud máxima de expulsión (lado de la matriz): 80 mm. Velocidad máxima: 360 piezas por minuto. Isdpfx Aohrdmxel Doih

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base Isdpfx Asuz If Nel Dsih - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2025, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 200 mm, rentang pengukuran sumbu Y: 200 mm, rentang pengukuran sumbu Z: 200 mm, masa garansi: 12 bulan, jarak pergerakan sumbu X: 200 mm, jarak lintasan sumbu Y: 200 mm, jarak gerak sumbu Z: 200 mm, tegangan masuk: 230 V, panjang pemakanan sumbu X: 200 mm, panjang umpan sumbu Y: 200 mm, panjang umpan sumbu Z: 200 mm, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pencahayaan, Refurbished Mahr MS 222 Multisensor Measuring Device (Optical Measuring Instrument) LIKE NEW, including acceptance certificate prior to delivery and free shipping within Germany* Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or forwarding company, worldwide shipping possible! Online demonstrations or optionally on-site demos with customer parts, technical application advice provided by accredited Profitech measuring laboratories during project planning. Complete service available upon request: – Delivery, installation, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training programs also bookable as online courses. Rental, leasing, or financing available directly via Profitech without financial institutions. Measuring device can be configured to customer requirements. Measuring range: 200 x 200 x 200 mm Loading weight (glass plate): 10 kg Scale resolution: 0.1 μm Max. traverse speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Length measurement uncertainty: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Optional extension: Renishaw probe system (TP20, TP200, SP25) on request Ijdpfxjglp Nqj Al Deih Retrofit 2025 Including PC and software Maximum traverse speed: 150 mm/s Dimensions: 900 x 750 x 950 Weight: approx. 90 kg Manufacturer’s sample image *Commissioning, on-site calibration, and training not included

Kondisi: bekas, Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 68910, berat benda kerja (maks.): 5.100 kg, lebar roda: 180 mm, diameter roda gerinda: 330 mm, sudut heliks: 45 °, kecepatan rotasi (min.): 1.100 rpm, kecepatan rotasi (maks.): 1.900 rpm, jenis arus masuk: AC (pendingin udara), diameter roda: 10 mm, diameter roda gigi: 330 mm, berat keseluruhan: 5.100 kg, tinggi total: 2.300 mm, panjang total: 6.000 mm, lebar total: 4.500 mm, Diameter roda - maks. 10 - 330 mm Lebar roda 180 mm Modul - maks. 7 Modul - min. 0,5 Panjang penjepitan 420 mm Jumlah gigi 10 - 600 Sudut heliks - maks. +/- 45° Kecepatan putar 1100 - 1900 rpm Iijdpfxoykrmcs Al Doh Diameter roda gerinda 280 - 350 mm Lebar roda gerinda 84 - 104 mm Berat mesin sekitar 5,1 t Kebutuhan ruang sekitar 4,5 x 6,0 x 2,3 m Pengolahan oli penggerinda Reishauer AF

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Werth Scope-Check 300x200x200 3D CNC coordinate measuring machine TECHNICAL DATA Measuring range (X x Y x Z): 300 x 200 x 200 mm Worktable load capacity: 20 kg Magnification: X5 Resolution: 0.5 micron Iiedpfxjvffcpe Al Dsh Weight: approx. 300 kg No guarantee is given for the correctness, completeness or current validity of the information provided.

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), - GEBRAUCHT - 6-ACHSEN-SCHIEBEKOPF-DREHMASCHINE MIT STANGENLADER MAX. DREHLÄNGE: 320 mm MAX. DREHDURCHMESSER: 32 mm SPINDEL: 200-8000 U/min; 3,7 - 7,5 kW GEGENSPINDEL: 200-7000 U/min; 1,5 - 2,7 kW X1-ACHS-VERFAHRWEG: 108 mm X2-ACHS-VERFAHRWEG: 228 mm Y1-ACHS-VERFAHRWEG: 275 mm Z1-ACHS-VERFAHRWEG: 325 mm Z2-ACHS-VERFAHRWEG: 130 mm Z3-ACHS-VERFAHRWEG: 410 mm EILGÄNGE X-Y-Z: 20 m/min Iisdpfx Aovthv Iel Djh ANGETRIEBENER REVOLVERKOPF: 8 STELLUNGEN; 200 - 5000 U/min STEUERUNG: CINCOM SYSTEM M6D STANGENLADER: IEMCA Mod. BOSS 332 EVOLUTION GEWICHT: 2.850 kg ZUBEHÖR: TEILEFÄNGER

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, nomor mesin/kendaraan: R14507, en-01 Ijdpfx Asya Aq Rel Djih

Kondisi: bekas, Tahun pembuatan: 1987, Translation of technical machinery sales description: x-axis travel 400 mm y-axis travel 250 mm Workpiece height 485 mm Control ELESTA CNC 314 Total power requirement 10 kW Machine weight approx. 4000 kg Space required approx. m H A U S E R (Switzerland) CNC-controlled coordinate grinding machine Model S 3 – CNC 314 Year of manufacture 1987 / partially overhauled in 1998 # S 3 - 0463 _____ Table size approx. 600 x 380 mm Table load capacity approx. 300 kg Longitudinal table travel max. (X) 400 mm Cross table travel max. (Y) 250 mm Vertical adjustment of grinding carriage max. (W) 450 mm Grinding spindle stroke max. (Z) 120 mm Grinding head stroke, hydraulic 15 - 7,500 mm/min Mounting height table/grinding spindle min./max. -75 / +485 mm Grinding spindle overhang 350 mm Taper grinding max. 16° Grinding diameter, borehole max. approx. 230 mm 18 spindle speeds, depending on spindle motor, continuously variable 4,500-80,000 rpm Planetary rotation speed (C), continuously variable 5-250 rpm U-axis, radial feed 6 mm Total drive approx. 10 kW – 380 V – 50 Hz Machine weight approx. 4,000 kg Accessories / Special equipment: • CNC path control Type CNC 314 (ELESTA-POSELESTA II) with monitor, for 4 axes (=X, Y, C + U-axis), with interpolation in 2.5 dimensions (X, Y, C). The U-axis is a feed axis and not capable of interpolation. Teach-in programming directly on the machine, with various sub-programs, as well as manual axis movements from the control panel or with an electronic handwheel. Separate digital display for the Z-axis • U-axis as manual and controlled radial feed axis, on the grinding head, with digital display of feed rate, • 2 grinding motors #5674 and #3980 for spindle speeds up to 80,000 rpm, • Built-in acoustic grinding contact indicator KSV 5 • HI-Cut system (oil cooling) and automatic fire protection system • Separate coolant unit with band filter, separate hydraulics and control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories available at present. Condition: good to very good / shortly ready for demonstration under power Delivery: ex stock here – as inspected Iiodpst Hw Txjfx Al Deh Payment: strictly net – upon receipt of invoice

Kondisi: bekas, TECHNICAL DATA - Number of axles: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machinable length: 170 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW Iodpfxewizt Ds Al Djih - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 1° - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 8 - Number of driven positions: 3 - Driven tool speed: 5,000 rpm FRONT TOOL POST - Number of positions: 4 SUB OPERATION - Number of positions: 7 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 11 kW WEIGHT AND DIMENSIONS - Required floor space: 1640 x 1200 mm - Machine height: 1725 mm - Machine weight: 1950 kg - Operating hours: 11,500 h ACCESSORIES - Control: Fanuc Oi TD - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank - Bar feeder: Tornos SBF 320 - Electrical transformer