Mesin pengukur koordinat 3D

Mitutoyo QS250Z

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), jumlah sumbu: 3, This 3-axis Mitutoyo Quick Scope QS-250 Z was manufactured in 2010 and comes equipped with a joystick control box, various clamping lugs, and profile rails offering versatile setup options. It includes a MAG1 mount as well as short and long spring clamps for precise optical measurement tasks. Take advantage of this opportunity to purchase a Mitutoyo Quick Scope QS-250 Z optical measuring device. Contact us for more details about this unit. Dksdpex D D Absfx Aaqjl Additional Equipment • Joystick control box • Tailstock • Spring-loaded tailstock • Clamping claws: 35-37, 39-41, 55-57 • Clamping profile rail with end face connection • Clamping profile rail without end face connection • Connector with alignment grooves • MAG1 mount • 15° spring clamp (short) • 15° spring clamp (long) • Clamping holder with thread • 30 mm cylindrical pin • Guide comb 40/10 mm (with longitudinal groove only) • 120° prism with spring clamp • Maximum length measurement deviation in the XY-plane is 2.5 + 0.006 µm • Measuring range (X/Y/Z): 200 x 250 x 100 mm • Resolution: 0.5 µm (0.0005 mm) • XY accuracy: (2.5 + 0.006 µm) • Z accuracy: (5 + 0.006 µm)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, jam operasional: 23.501 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 705 mm, diameter pembubutan: 366 mm, daya motor spindle: 18 W, kecepatan spindel (min.): 4.000 rpm, kecepatan spindel (maks.): 10.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 50 mm, jarak gerak sumbu Z: 795 mm, kecepatan rotasi (maks.): 10.000 rpm, tinggi total: 2.395 mm, panjang total: 5.330 mm, lebar total: 4.100 mm, berat keseluruhan: 8.360 kg, CNC control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 max. Turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross slide mm: 740 Bar capacity mm: 80 Tool magazine Number of tool stations: 20 Tool mount: BMT40 Upper turret Number of tool stations: 20 Max. driven tool speed rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid traverse: 30 Main spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/18.5/15 (25%ED/50%ED/cont) Max. torque Nm: 49 Sub spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11/7.5 (25%ED/cont) Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling system Tank capacity liters: 366 Equipment Electronic handwheel Chip conveyor Signal tower High-pressure pump Touch probe Paper band filter Machine runtime: Hours powered on: 23,501 Cutting time: 7,494 Nominal power kVA: 48 Dodpfxoywtwwo Aaqskl Basic machine: Dimensions/Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, en Dsdpex Nr Tbofx Aaqekl

Kondisi: sangat baik (bekas), Mitutoyo Model: QS250Z Mitutoyo QS250Z CNC Vision Measuring Machine – Year of manufacture: 2017 – incl. software & accessories Available for sale: a high-quality CNC vision measuring machine, Mitutoyo QS250Z, from 2017 in very well-maintained condition. This is a precise optical coordinate measuring machine for non-contact measurement of workpieces. Ideal for quality assurance, incoming goods inspection, production, precision mechanics, electronics, plastics engineering, and much more. What does the device offer? The QS250Z is a CNC-controlled optical measuring machine for: - 2D coordinate measurement - Contour and profile measurement - Determination of distance, radius, angle, and diameter - Measurement of boreholes, grooves, edges, and complex geometries - Series measurements with automated measurement programs - Documentation and protocol creation via Mitutoyo software Measurement is performed contactlessly using a high-resolution camera system with image processing. Ideal for sensitive or small components where tactile measurement is unsuitable. Thanks to CNC control, automated measurement sequences are possible—perfect for repetitive inspection processes. Technical Data: Model: Mitutoyo QS250Z Machine type: CNC Vision Measuring Machine Year of manufacture: 2017 Code No.: 359-508-10Y Manufacturer: Mitutoyo Corporation, Japan Electrical data: 200–240 V AC 50/60 Hz Power consumption: approx. 500 W Fuse: 250V T 2.5A Dimensions (approx.): Width: approx. 700–800 mm Depth: approx. 900 mm Height: approx. 1,100 mm Weight (approx.): approx. 150–200 kg Important note: “The table shown in the photos is not part of the sale.” Condition: used Scope of delivery: (see photos) Mitutoyo QS250Z main unit Joystick box Software package: - QS-ConfigDisk - QSPAK - FORMTRACERPAK-AP - MiCAT Vision / Form Manuals & documentation Various electronic cards (see images) Additional accessories as shown (Subject to changes and errors in the technical data and information!) For further inquiries, we are happy to assist you by phone. Dsdpfx Aaeynkbajqokl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, kecepatan spindel (maks.): 6.000 rpm, jarak gerak sumbu Z: 700 mm, daya motor spindle: 32.000 W, produsen pengendali: SIEMENS, model controller: C200-sl, jumlah sumbu: 5, This 5-axis Index C200 was manufactured in 2023 and offers advanced features for horizontal turning operations. This machine is ideal for precision and efficiency in metalworking, making it a valuable addition for improving production quality. Take advantage of the opportunity to purchase this Index C200 horizontal lathe. Contact us for more information. Additional Equipment • Software options: OPC UA for host computer integration (up to 200 variables). ChipMaster cycle for chip breaking control. • Environmental data: Noise level: 73.8 dB(A) Machine Advantages Technical Machine Advantages • Control: Based on Sinumerik 840D solutionline (sl) with Sinamics S120 drives. 18.5" TFT color display with PCT touch (IP65). Siemens operator interface in German. • Interfaces: 4x USB 2.0 (2 on the control panel, 2 inside the control panel). Network capability for NC data transfer (logical drives). • Safety: Siemens Safety Integrated (Profisafe). • Turret mechanism: Hydraulic locking, AC motor with helical gear. Drive power per tool carrier: 10 kW (25% duty cycle), max. 8,000 rpm. Dedpfx Ajyyuvtsaqskl • Tool holder: Cylindrical shank D25x48 (DIN69880) with W-grooves for increased repeatability. Driven tools possible at every station (can only rotate in the working position). • Cooling unit: 13 kW for hydraulics, spindles, and control cabinet. Connection for cooling water (20°C ±2°C, 30 l/min, glycol 25%). • Chip conveyor: Hinge belt conveyor (by KNOLL) with 180-liter tank, discharge height 840 mm. Coolant system: 750-liter tank, 8-bar/20-80-bar pumps. • Bar feeder interface: UNIMAG4-compatible (external loaders require a special cover). Maximum bar length: 1,035 mm (short bar operation). Gantry loading device: Pneumatic gripper (Ø 10-90 mm, max. 3.5 kg). Conveyor belt with selector for finished parts/remnants. Additional Information Control Unit Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Rated power: 54kW Connected load: 65kVA Rated current: 94A Max. main fuse: 100A Main Drive Main spindle and counter spindle Spindle head mounting: OD 140mm, ID 85mm Front bearing diameter: 110 mm Max. torque (100%/40%): 125/170 Nm Clamping pressure min./max.: 8/80 bar Piston surface pressure: 57cm² Piston area, clamping: 57cm² Max. clamping force: 45,600 N Max. draw force: 45,600 N C-Axis: Drive: Spindle hollow-shaft motor; Angle measuring system directly on the spindle Positional dispersion (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Head Tool Carrier 1 X-axis travel: 110mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5,000N Z-axis travel: 320mm Z-axis rapid traverse: 50m/min Z-axis acceleration: 9m/s² Z-axis feed force: 5,000N Y-axis travel: 100mm Y-axis rapid traverse: 15m/min Y-axis acceleration: 9m/s² Y-axis feed force: 5,000N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 2 X-axis travel: 110mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5,000N Z-axis travel: 550mm Z-axis rapid traverse: 50m/min Z-axis acceleration: 9m/s² Z-axis feed force: 5,000N Y-axis travel: 100mm Y-axis rapid traverse: 15m/min Y-axis acceleration: 9m/s² Y-axis feed force: 5,000N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 3

Kondisi: bekas, Tahun pembuatan: 2010, Maximum turning diameter: 320 mm Turning length: 810 mm Control: MSX 701 Maximum spindle speed: 6,000 rpm Main spindle drive power: 22 / 18 kW Maximum bar capacity: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Maximum counter spindle speed: 6,000 rpm Counter spindle drive power: 22 / 18 kW Maximum bar capacity (counter spindle): 52 mm C-axis (counter spindle): 0.001° Spindle nose (counter spindle): JIS A2-5 Collet chuck (counter spindle): 140 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Driven tool drive power: 7.5 / 5.5 kW Y-axis travel: 110 mm Dkodpfx Asv E R E Ajaqsl Number of tool stations (lower turret): 16 positions Number of driven tool stations (lower turret): 16 positions Speed range – driven tools (lower turret): max. 6,000 rpm Driven tool drive power (lower turret): 7.5 / 5.5 kW X-axis travel (1/2): 210 mm Y-axis travel: 110 mm Z-axis travel (1/2): 810 mm B-axis travel: 900 mm Total power requirement: 86 kVA Machine weight approx.: 8.1 t Space requirement approx.: 8.0 x 3.5 x 2.8 m CNC Turning and Milling Center MORI SEIKI - NZ 1500 T2Y - Main spindle and counter spindle - 2 turrets, top and bottom - Y-axis - 2x 16 driven tool positions

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Dkjdpsuz If Nsfx Aaqol Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2025, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 200 mm, rentang pengukuran sumbu Y: 200 mm, rentang pengukuran sumbu Z: 200 mm, masa garansi: 12 bulan, jarak pergerakan sumbu X: 200 mm, jarak lintasan sumbu Y: 200 mm, jarak gerak sumbu Z: 200 mm, tegangan masuk: 230 V, panjang pemakanan sumbu X: 200 mm, panjang umpan sumbu Y: 200 mm, panjang umpan sumbu Z: 200 mm, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pencahayaan, Refurbished Mahr MS 222 Multisensor Measuring Device (Optical Measuring Instrument) LIKE NEW, including acceptance certificate prior to delivery and free shipping within Germany* Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or forwarding company, worldwide shipping possible! Online demonstrations or optionally on-site demos with customer parts, technical application advice provided by accredited Profitech measuring laboratories during project planning. Complete service available upon request: Dsdpfsglp Nqex Aaqjkl – Delivery, installation, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training programs also bookable as online courses. Rental, leasing, or financing available directly via Profitech without financial institutions. Measuring device can be configured to customer requirements. Measuring range: 200 x 200 x 200 mm Loading weight (glass plate): 10 kg Scale resolution: 0.1 μm Max. traverse speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Length measurement uncertainty: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Optional extension: Renishaw probe system (TP20, TP200, SP25) on request Retrofit 2025 Including PC and software Maximum traverse speed: 150 mm/s Dimensions: 900 x 750 x 950 Weight: approx. 90 kg Manufacturer’s sample image *Commissioning, on-site calibration, and training not included

Kondisi: bekas, Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 141447, Karakteristik teknis: Rentang pengukuran maksimum dalam mm Sumbu X 500; Sumbu Y 500; Sumbu Z 500 Dimensi dalam mm Tanpa basis: panjang: 1160; lebar: 1080; tinggi: 1803 Dkjdexxvbrjpfx Aaqsl Dengan basis: panjang: 1170; lebar: 1090; tinggi: 2480 Massa CMM dalam KG: tanpa basis: 350 dengan basis: 445 Maks. masa benda kerja yang diizinkan dalam KG: 100 Perlengkapan terdiri dari: Mesin ukur koordinat (CMM) dengan basis Kontrol (terintegrasi) Konsol kontrol Perangkat lunak (Calypso 5.4) Dokumentasi Sistem probing Stylus utama Standar referensi Rak penukar Status mesin: BERFUNGSI

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, NAKAMURA WY250 SUPERMILL LATHE YEAR 2007, FULLY FUNCTIONAL WITH DOUBLE Y AXIS - FANUC 31iA2 CNC control - Main spindle bar capacity: 65mm, Power: 18kW, ASA 6, 4,500 RPM - Sub-spindle bar capacity: 51mm, Power: 11kW, ASA 5, 5,000 RPM - Driven tools power: 7kW with 40Nm torque on both turrets (65mm bore SUPERMILL) - Y-axis on both turrets (Y travel - upper: +50/-50mm, lower: +20/-50mm) - Type G part catcher - Distance between spindle noses: 870mm - Maximum turning diameter: 225mm - Rapid traverse Z: 36 m/min – X: 18 m/min - Expanded 500L coolant tank with chip conveyor - Turret coolant pumps: GRUNDFOSS CRK4-100/10, dual stage, 3-12 bar with filters - Spindle top washing - Air blow and washing through sub-spindle - Auto shut-off Djdpfx Asyrb Tneaqekl - 3-color signal light - NT Nurse axis load monitor - IEMCA MASTER 880 bar feeder, year 2003 - Equipped with toolholders and collet holders as detailed below: Supplied with the machine: - 4 external toolholders - 4 toolholders for simultaneous mounting of 2 opposing tools - 6 boring bar holders - 1 H32 parting blade holder - 4 radial driven toolholders (HEIMATEC brand) - 4 axial driven toolholders - 1 Bellegrandi MSCNT70-A6” collet holder for BA and BD collets, size 70 (complete with respective bushings, for main spindle side) - 1 Bellegrandi MSCTNR70-A5” collet holder for BA collets, size 70 (complete with spring ejector, for sub-spindle side) - Complete set of hand jaws for the part unloader