Horizontaldrehmaschinen Monforts KNC5-1500 1999

Monforts

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 538/04, diameter putar di atas sled silang: 300 mm, panjang pembubutan: 600 mm, lubang spindel: 52 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 50 rpm, gores kuas bulu: 90 mm, torsi: 240 Nm, berat keseluruhan: 7.000 kg, diameter ayun di atas peluncur melintang: 440 mm, Perlengkapan: dokumentasi / manual, Monforts RNC 500 yang terawat baik, dapat dilihat dalam kondisi bertegangan. Kontrol Fanuc 18 i TB 12 tempat alat berpenggerak dengan dudukan VDI 40 Spindel sekunder dengan collet chuck 173 E Spindel utama Kitagawa cekam tiga rahang BB 208 Hfedpfx Ajyrbmhoaneg Panduan bulat hidrostatik Sistem pemrograman FAPT Spindel utama dan sekunder Konveyor serpihan Unit pendingin dengan filter flatbed Penangkap bagian dengan alat transportasi Pendorong pada spindel sekunder Loader batang pendek Samsys Multi 3000 Pipa reduksi Pistol semprot Sumbu C Sumbu Y Perlengkapan mesin lebih lanjut lihat gambar

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 660 mm, jarak gerak sumbu Z: 610 mm, produsen pengendali: HURCO, model controller: WINMAX, tinggi total: 3.240 mm, beban meja: 2.000 kg, berat keseluruhan: 7.950 kg, kecepatan spindel (maks.): 12.000 rpm, berat alat: 7.000 g, jumlah sumbu: 3, This 3-axis Hurco VMX50i was manufactured in 2021. It is equipped with a robust SK40 spindle reaching speeds of up to 12,000 rpm and offers a large table area of 1500 x 660 mm, capable of supporting workpieces up to 2,000 kg. With X/Y/Z travels of 1270/660/610 mm and rapid traverse rates of 32/32/24 m/min, this machine is ideally suited for dynamic machining operations. Includes an automatic tool changer with 30/40 positions. Please contact us for further details regarding this machine. • Spindle nose to table: 101–711 mm • Table working area (W x D): 1500 x 660 mm • Table T-slots (DIN 650): 6 x 18 x 100 mm • Automatic tool changer (ATC) positions: 30/40 • Machine condition: Powered on and operational • Total machine hours: 6,700 Additional equipment: Hsdpsx D E Acsfx Aanefg • Chip conveyor • Mist extractor • External coolant tank with filtration for internal tool cooling • Including workpiece and tool probes • Programming extensions for DWG/DXF Dimensions: Machine depth: 5059 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 198/04, panjang pembubutan: 1.500 mm, diameter pembubutan: 500 mm, diameter ayun di atas peluncur silang: 290 mm, kecepatan spindel (min.): 3 rpm, kecepatan spindel (maks.): 2.800 rpm, lebar tempat tidur: 360 mm, panjang total: 3.325 mm, lebar total: 1.550 mm, tinggi total: 1.740 mm, jenis arus masuk: tiga fasa, berat keseluruhan: 3.800 kg, torsi: 1.520 Nm, diameter spindel: 70 mm, panjang benda kerja di antara senter: 1.500 mm, Monforts KNC 5 terawat, terawat perawatan dengan banyak aksesori. Dapat dilihat dalam kondisi teraliri listrik. Rincian perlengkapan silakan lihat pada gambar. Chuck 3 rahang Chuck 4 rahang Piringan muka Hsdpfx Aaeyn U T Tenofg Chuck collet 173 E Wadah serbuk logam Pompa pendingin Tailstock

Kondisi: bekas, Tahun pembuatan: 2001, drehdurchmesser-500-mm-drehlange-1000-mm-steuerung-monforts-cont rol-steuerung-system-euro-turn-drehdurchmesser-uber-bettschlitten -290-mm-spindelbohrung-70-mm-spindeldrehzahlen-3-2800-u-min-spind elleistung-15-kw-drehmoment-an-der-spindel-1530-nm-spindelkopf-di n-55027-gr-8-vorschubkraft-x-z-achse-11300-n-eilgang-langs-plan-1 0-5-m-min-bettbreite-360-mm-planschlittenweg-265-mm-oberschlitten weg-140-mm-drehmeisel-schaftquerschnitt-32-x-25-mm-reitstockpinol endurchmesser-80-mm-reitstockpinolenhub-160-mm-reitstockaufnahme- mk-5-maschinengewicht-ca-3-1-t-zubehor-3-backenfutter-rota-s-plus -250-mmo-4-fach-stahlhalterkopf-parat-kuhlmitteleinrichtung Hfsdpfxjy Nnw As Aansg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, tinggi total: 3.240 mm, berat keseluruhan: 8.880 kg, This 3-axis Hurco VMX 50i was manufactured in 2014 and features a robust table size of 59 x 26 inches, with a maximum spindle speed of 12,000 RPM. It supports a tool capacity of 40 tools and boasts a rapid tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining, it offers a maximum table load of 4,410 lbs. If you are looking for high-quality milling capabilities, consider the Hurco VMX 50i machine we have for sale. Contact us for more information. • Table size: 1,500 x 660 mm • T-slots: 6 x 18 mm • Maximum table load: 2,000 kg • Spindle nose to table: 101 mm • Maximum spindle speed: 12,000 RPM • Spindle power (15 min/continuous): 15 kW / 11 kW at 720 RPM • Spindle torque (15 min/continuous): 198.9 Nm / 116.7 Nm @ 720 RPM • Tool type: CAT 40 / Big Plus® • Tool capacity: 40 • Maximum tool diameter: 76 mm Hodpox D E Eqjfx Aanefg • Maximum tool length: 300 mm • Maximum tool weight: 7 kg • Tool-to-tool ATC time: 2 seconds Dimensions Machine depth: 5055 mm

Kondisi: bekas, Technical Details: Swing diameter over bed: 830 mm Swing diameter over cross slide: 540 mm Turning length: 3000 mm Swing diameter over support: 540 mm Distance between centers: 3000 mm Faceplate diameter: 800 mm Hodjwmlknjpfx Aanofg Rapid traverse X-axis: 4 m/min Control: MTC K (Monforts) Speed range: 2 - 1,600 rpm Spindle bore: 88 mm Tailstock quill taper: ISO MK6 Tailstock quill stroke: 200 mm Max. workpiece weight between centers: 1,250 kg Max. workpiece weight - unsupported: 3,000 kg Swing diameter in gap: 1,200 mm Gap length: 310 mm Machine weight approx.: approx. 6.85 t (without chip conveyor and coolant tank) Machine dimensions approx. LxWxH: 2.55 x 1.1 x 1.29 m CNC cycle lathe Machine overhauled in 2010 Operation via control panel Thread cutting via calculation interpolator of the NC control Chip conveyor manufacturer: Kabelschlepp Three-jaw chuck D=500mm without clamping jaws Various accessories

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 410 mm, jarak gerak sumbu Z: 280 mm, daya motor spindle: 30.000 W, berat keseluruhan: 6.800 kg, jumlah sumbu: 2, Horizontal lathe from 2001. This Monforts RNC 400 A features a swing over bed of 410 mm and a turning length of 600 mm. It is equipped with a 12-position disc turret and a powerful three-phase motor with a speed range of 30–4000 rpm. If you are looking for a high-quality lathe, you should consider the Monforts RNC 400 A that we have for sale. Contact us for further details. • Swing over bed: 410 mm • Swing over cross slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Bar capacity/material passage: 65 mm • Main drive: three-phase asynchronous motor (100% ED/40% ED), 20.5/30 kW • Max. torque: 500 Nm • Feed drive: three-phase servo drives with electronic safety monitoring • Rapid traverse (X/Z): 24/24 m/min • Feed force (X/Z): 7.2/10.7 kN • Tailstock: on separate guideway, manual clamping, 900 mm travel, 90 mm quill stroke, 12,000 N force • Tool turret: 12-position disc turret, DIN 69880 / VDI 3425/2, 40 mm tool shank diameter (VDI 40), directional logic and face gearing Hfedpfsy If A Hex Aanog • Hydraulics: central pressure oil supply for hydrostatics and clamping; hydraulic hollow chuck (max 65 mm) • Coolant system: 310 l tank, 3 bar, 40 l/min • Control and equipment: 256 kB memory (expandable to 1.5 MB), programming according to DIN 66025, 2D/3D simulation, serial interface RS-232C, tool compensation (up to 600 tools), constant cutting speed, threading/thread cutting • Construction: 60° slant bed, steel welded construction on reinforced concrete base with 3-point support; hydrostatic guides (X-axis) • Tool measuring device • Chip conveyor interface (interface only) • Power supply: 3x400 V (+10%), 50 Hz, total connected load 20.5 kW (41 kVA) Technical Specification Counter Spindle No Driven Tools No

Kondisi: bekas, ENGLISH TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: BT30 - Spindle drive power: 5.5 kW Hfodpfx Aeuhbt Dsanog - Spindle speed: 12,000 rpm LINEAR AXES - Travel (X/Y/Z axes): 560 / 400 / 300 mm - Distance from table to spindle nose: 180 – 480 mm TOOL CHANGER - Type of tool changer: Parapluie (umbrella type) - Number of tools in magazine: 14 TABLE - Table size: 650 x 410 mm - Max. table load: 200 kg ELECTRICAL SUPPLY - Supply voltage: 380 V - Total power: 15 kW WEIGHT AND DIMENSIONS - Footprint: 1,590 x 2,640 mm - Machine height: 2,500 mm - Machine weight: 2,600 kg MACHINE HOURS - Power-on hours: 56,460 h - Operating hours: 13,075 h ACCESSORIES - Control: Fanuc Oi-MD - 3-color status lamp - Rotary table type: 4th-5th axis integrated (4+1) * Manufacturer: NIKKEN * Minimum 4th axis resolution: 0.001° * Minimum 5th axis resolution: 0.001° - Coolant tank * with high-pressure pump * with paper filter - Electrical transformer

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 410 mm, jarak gerak sumbu Z: 280 mm, daya motor spindle: 30.000 W, berat keseluruhan: 6.800 kg, jumlah sumbu: 2, Horizontal lathe from the year 2000. This Monforts RNC 400 AC features a turning length of 600 mm and a swing over bed of 410 mm. It is equipped with a 12-position disc turret and a maximum spindle speed of 4,000 rpm. If you are looking for a high-quality lathe, consider the Monforts RNC 400 AC that we have for sale. Contact us for further details. • CNC memory: 256 kB (buffered RAM), expandable to 1.5 MB • Programming language: DIN 66 025 with high-level language extensions • Swing over bed: 410 mm • Max turning diameter over cross slide: 280 mm • Turning length: 600 mm • Spindle bearing diameter: 130 mm • Spindle nose: DIN 55026 A6 • Bar capacity: 65 mm • Max. torque: 500 Nm • Axes/feeds: AC servo drives with electronic safety monitoring; rapid traverse X/Z 24/24 m/min; feed force X/Z 7.2/10.7 kN • Turret: 12-station disc turret (DIN 69880/VDI 3425/2), shaft diameter 40 mm • Driven tools: 12 stations; maximum power 13.6 kW (25% duty cycle); maximum torque 28.9 Nm; maximum speed 4,500 rpm • C-axis: 0-25 rpm; 300 Nm holding torque • Tailstock: Separate guideway; manual clamping; 900 mm travel; 90 mm quill stroke; 12,000 N force (adjustable); MT3 Hfjdpfx Aaey Ifptjnjg • Hydraulic system: Centralized pressure oil supply for hydrostatics and clamping • Coolant system: 310 L tank; reinforced coolant pump (3 bar, 40 L/min) • Bed: 60° slant bed; welded steel construction on a reinforced concrete base with 3-point support • Power requirements: 3x400 V, 50 Hz; total connected load 20.5 kW (41 kVA) Additional Equipment • Hydraulic hollow chuck • Parts catcher • A6 draw tube for collet chuck • 200 mm suction nozzle • 1 GB memory expansion • Network card • Driven tools with rigid tapping (without compensating chuck) Technical Specification Counter Spindle: No Driven Tools: Yes

Kondisi: baik (bekas), Tahun pembuatan: 1998, 10548 Hfjdpfxsxmd T Eo Aaneg

Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, Mesin bubut untuk pelatihan MCM tipe ATL 400 X 5000 CNC FAGOR 55i tahun 2013. Diameter di atas alas: 1000 mm. Diameter di atas carriage: 700 mm. Revolver Duplomatic 12 posisi. Steady rest hidrolik. Hodpfeyurxyjx Aanjfg

Kondisi: baik (bekas), Tahun pembuatan: 1999, 10365 Manufacturer: MONFORTS Model: KNC 8 S - 3000 Year of manufacture: 1999 Control type: CNC CNC control: MTC K Location: Halberstadt Country of origin: Germany Machine No.: 178.05 X-axis travel: 455 mm Z-axis travel: 2,850 mm Chuck diameter: 315/400/500 mm Centre distance: 3,000 mm Feed force Z: 23.9 kN Feed force X: 11.3 kN Rapid traverse speed X-axis: 6.8 m/min Rapid traverse speed Z-axis: 4 m/min Swing diameter over cross slide: 540 mm Max. swing diameter: 830 mm Top slide travel: 450 mm Max. spindle bore for rolled material: 88 mm Max. spindle bore for bright steel: 90 mm Tailstock quill outer diameter: 125 mm Hfedpoy Edz Ajfx Aansg Tailstock maximum quill stroke: 200 mm Tailstock taper: MT6 type Hydraulic tank: 15 l Coolant tank: 220 l Coolant tank with chip conveyor: 160 l Machine length: 5,200 mm Machine width: 2,110 mm Machine height: 1,995 mm Approx. machine weight: 6.85 t (without chip conveyor and coolant tank) Headstock Spindle nose: DIN 55027 - 11x290 Additional information: - Additional lubrication oil reservoir approx. 6 l - Incl. accessories Machine is powered and can be inspected by appointment.

Kondisi: bekas, Tahun pembuatan: 2000, technische-details-cz-0101 Hedjxxig Uspfx Aansfg

Kondisi: bekas, Tahun pembuatan: 1996, Rincian Teknis: Hodpfx Aswwlvloanofg Diameter putar: 500 mm Panjang putar: 1500 mm Diameter putar di atas carriage: 290 mm Lubang spindle: 71 mm Rentang kecepatan putar: 3 - 2800 rpm Kecepatan rapid traverse: 10 / 5 m/menit Kecepatan feeding: 1 - 2000 mm/menit Kebutuhan daya total: 22 kW Berat mesin sekitar: 3,2 ton Kebutuhan ruang sekitar: 3,0 x 1,6 x 2 m dengan kontrol siklus dari R&D MTC-K Holder alat PARAT Perlengkapan pendingin