Pusat permesinan 5-sumbu

MORBIDELLI AUTHOR M 600 F

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 9 kW (12,24 hp), Ott veneer press Connection rating: 380V, 9kW Plate size: 2250 x 1350 mm Ffsdpfxjtwp Iws Adgjt Elkom heating plates, gold-anodised Plates and hydraulics in good condition

Kondisi: sangat baik (bekas), Drilling capacity - 20 mm Spindle mount FEHLMANN Spindle speeds 50–6300 rpm Throat depth 276 mm Cross table 530 x 255 mm Ffjdpfx Aouy Sazodgst Digital readout Various accessories MARCELS MASCHINEN CH

Kondisi: baru, Tahun pembuatan: 2022, New machine Year of manufacture: 2022 ADVANTAGES Fjdpfekwhwlox Adgjft - 4 workstations on one machine - 80, 300 and 1000 mm radii - Straight and curved sanding support - 150 mm belt height - Pneumatic belt tensioning - Continuously adjustable pneumatic oscillation of the unit - Solid grey cast iron unit – long-lasting excellent sanding results - All-round extraction above the worktable - Only the highest quality components - Because we believe in our machines – 5-year warranty - Each machine is hand-built in our home region (Rehnen) - Lifetime spare parts supply - GS & BG dust tested Motor power: 4 kW Abrasive belt size: 150 x 2700 mm Abrasive belt speed: 15 m/sec. Table size: 345 x 2000 mm Required space: 2000 x 3000 mm Weight: 560 kg Extraction diameter: 140 mm Availability: short-term Stock location: Hochheim

Kondisi: sangat baik (bekas), - Digital readout by Mitutoyo. - Accessories available. Travel paths: X-axis travel 280 mm Ffedpfxsw Hqh Es Adget Y-axis travel 210 mm Cross table KS 255 Spindle speeds 135 – 4,500 rpm

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tsk-getqjl4u Fedpfx Adoxz D Npjgoft

Kondisi: sangat baik (bekas), Press rak rak Manni 2500×1300 Ffedpfxexyvyke Adgot Panjang rak: 2500 mm Lebar rak: 1300 mm Press dengan 4 silinder hidrolik Rak dipanaskan dengan air dari sistem pemanas sentral (CO)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear stages >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 Ffjdpfx Asvtp Edsdgot >> Tailstock: MT 2 >> Feeds: 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, height: 1.3 m, depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly, and surface finishes similar to grinding can be achieved. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Fodpfx Aevivmyedgeft Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose according to DIN 4 >> Tailstock Morse Taper 2 (MT2) >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric pitch range: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 new 3-jaw chuck, 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm, in 1 mm increments (new) About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is highly user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and convince yourself of its condition.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970 Machine No. M1012 Ffedpfxsvv Etvs Adgot >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper: MK 3 >> Feeds: 0.010 to 1.184 mm/rev >> Possible thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck with 32 collets (set is incomplete) with adapter >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Multifix tool post size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered here is a used Weiler Matador VS-2 in full working condition. Take the opportunity to inspect and test the machine under power on site to verify its condition.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Fjdju Aftgepfx Adgsft Technical Data: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Distance between centres: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for surfaces to be produced as if ground. Take the opportunity to inspect this machine under power on site and see its condition for yourself.