Garis pengeboran

Morbidelli Zenith F2 x 2 Mahros Brush SFx2

Kondisi: bekas, SPE Renergi Niedertemperatur-Trockner Der Renergi Trockner wird zur Trocknung von Sägemehl und anderen Materialien zur Herstellung von Biokraftstoffen eingesetzt. Der Trockner kann Sägemehl, Rinde oder Hackschnitzel von einem Feuchtigkeitsgehalt von ca. 50 % auf einen Wert von etwa 10 % trocknen. Dieser Niedertemperatur-Trockner nutzt Warmwasser (oder Heißwasser) ab einer empfohlenen Temperatur von 65 °C. Die maximale Wassertemperatur beträgt 110 °C. Netzanschlusssicherheit: Der Trockner darf ausschließlich mit 3x400 V AC (630 A) 50/60 Hz und einer separaten Schutzleiterzuleitung betrieben werden. Netzanschluss-Daten: • Spannung: 400 V AC, Drehstrom • Empfohlene Absicherung in der Zuleitung: maximal 3x630 A • Typischer Stromverbrauch: 200 kW Die Abmessungen des Trockners betragen ca. 17,4 x 5,7 Meter, bei einer Höhe von 10,7 Metern. Die erforderliche Stellfläche beträgt etwa 21,4 x 8,0 Meter. Die Mindestdeckenhöhe sollte 15 Meter betragen (bzw. mindestens 4 Meter über dem Einlauf des Mediums). Luftzufuhr: Für den Betrieb dieser Anlage ist eine Frischluftmenge von mindestens 24 kg Gas/s erforderlich, was 20 Nm³/s oder 72.000 Nm³/h entspricht. Luftdurchsatz: max. 200 Liter/min Luftdruck: mindestens 4,5 bar, empfohlen 6,0-8,0 bar Wasserversorgung: Heißwasserzufuhr mit einem Durchfluss von 32 dm³/s. Wasserdruck: min. 1,5 bar, max. 6,0 bar Betriebstemperaturbereich: • Zulufttemperatur: -20 °C bis 50 °C • Relative Luftfeuchtigkeit: 0 % bis 60 % Rohmaterial/Medium: Lodpswp Rqfefx Alksrk • Ausgangs-Feuchtigkeit: 45 % bis 55 % (Gewichtsprozent) • Ziel-Feuchtigkeit: 8 % bis 15 % im getrockneten Material Kapazität: • Der Zwei-Kammer-Trockner mit 4 m Breite verarbeitet typischerweise 2.400 kg Material mit 55 % Feuchtigkeitsgehalt pro Charge • Der Trockner kann 6.000 kg Rohmaterial mit einem Feuchtigkeitsgehalt von 55 % auf 10 % in etwa einer Stunde trocknen Der Trockner von SRE ist nach den europäischen Richtlinien konstruiert. Die Anlage erfüllt die grundlegenden Anforderungen der: • Maschinenrichtlinie 2006/42/EG • Niederspannungsrichtlinie (LVD) 2006/95/EG • EMV-Richtlinie 2004/108/EG Der Trockner befindet sich in der Gemeinde Straupe, Bezirk Cēsis, LV-4152, Lettland. Besichtigung an Werktagen von 08:00 bis 17:00 Uhr nach vorheriger Terminvereinbarung möglich. Der Trockner ist bereits demontiert. Sämtliche Elektropläne, Handbuch und Bedienungsanleitungen sind vorhanden. Auf Wunsch kann ein Ansprechpartner mit Erfahrung im Betrieb dieses Trocknertyps zur Beratung vermittelt werden. Preis: 20.000,00 EUR (zzgl. MwSt.)

Tahun pembuatan: 2011, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Finger jointing line for cross-sections up to 200 cm² (80/240 mm or 100/200 mm), including the following components: 1. HOWIAL Tilt Destacking System - SH/4t - 1.75x1.75x6.00m - 4t – shortest length 2.50 m, semi-automatic package separation. For tilting the timber stack up to 45°. Electro-motor drive. Max. stack dimensions 1.75 x 1.75 x 6.00 m. Max. stack weight 4 t. Shortest timber length 2.5 m. 2. HOWIAL Lamella Separator VE 1 to crosscut saw. With pneumatically controlled tongues, on which material marked for defects is placed onto the underlying roller conveyor. 3. HOWIAL Grading Roller Conveyor RO-1 Digital wood moisture measuring, control and recording system for automatic acquisition and control of wood moisture using the impulse measuring method based on the electrical resistance principle. 4. Gann DMT-8 Digital wood moisture measuring, control, and recording system for automatic acquisition and control of wood moisture by impulse measuring based on the electric resistance principle. System installed in a large control cabinet, complete with inkjet printer. 5. HOWIAL Crosscut Saw AS-30 B Pneumatically controlled under-table crosscut saw with 2 automatic feed units, automatic crosscutting. Special photo cell control for detection of fluorescent line marking. Automatic waste detection possible. Saw motor power 7.5 kW Saw blade diameter 700 mm Feed drive approx. 2 x 1.5 kW Air pressure 8 bar Max. feed speed approx. 60 m/min 6. HOWIAL Belt Conveyor for cutoff waste, with profiled belt and guide plates Belt width 350 mm Belt length 2000 mm Ledpfxei Ezx Ds Alkjrk Belt speed 0.4 m/s 7. HOWIAL Double Roller Conveyor RO-2, 6.00 m long Incl. transverse transport, conveyance to finger jointing system. Powered by round belt, all rollers driven. Cross-transfer chain conveyor. Eject ± moisture right, transport speed adjustable up to 100 m/min. Length approx. 6.00 m Roller width approx. 400 mm Diameter 112 mm 8. Compact Finger Jointing Machine Cook Bolinder The technical data are original from Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Input lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Pressing force 5 - 22 tons Spindle diameter 50 mm Finger joint profile 15/15 Spindle speed approx. 6000 rpm Total electrical connected load approx. 62 kW Machine weight approx. 9 tons Gluing: OEST comb system for PU Modern Telemechanique PLC control. 9. HOWIAL Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical Data: Height: 920 mm Length: approx. 12,000 mm 10. Safety fence panels including safety switches 11. Finger Joint Testing Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Bearing distances freely adjustable, mounted measurement scale, automatic calculation of support distances in the software. Fully automatic test sequence by mouse click via PC (PC not included). Alternatively, the test process can be operated via front panel keys. Connection to any standard PC or laptop (Win 2000/XP) via supplied RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. pressing force: < 100 kN Max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING

Kondisi: diremajakan ulang (bekas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, with high-speed automatic handling equipment. Comprising the following machines: A) FEEDING STATION "RBO" Winner C 3200 with double pick-up and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for in-feeding panel stacks to the loader. B) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° Ljdpfedfgg Iex Alksrk G) STACKING STATION "RBO" Winner SC 3200 with double pick-up, double stacking station, and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for out-feeding panel stacks from the unloader.

Tahun pembuatan: 1988, Kondisi: perlu perbaikan (bekas), translation_001 Lredpfxjvbtps Alkjk

Kondisi: baru, Tahun pembuatan: 2025, Kabinet sandblasting tekanan DSK 11.11.30. Ruang blasting B=1050 D=1050 T=955mm. 1 tangki tekanan bersertifikat TÜV 30l dengan corong keluaran berbentuk kerucut. 1 katup dosing media blasting dengan regulasi jumlah media berkontrol pneumatik. 1 kerucut penutup internal dengan pipa pemandu. 1 sambungan udara tekan dengan katup penutup pneumatik dan cabang untuk udara kontrol. 1 regulator tekanan untuk penyetelan tekanan blasting. 1 selang blasting DN19. 1 handpiece dengan nozzle blasting boron carbide Venturi 8mm. 1 pasang sarung tangan blasting. Pengaturan ketinggian kabin secara elektrik untuk posisi kerja ergonomis. Memori posisi untuk 3 ketinggian. Filter penghilang debu 2000m³/jam 2,2kW. Lsdpfxsga Ehbs Alkerk

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), Connected load: 4 kW, weight: 1 t. Lrjdpfx Aehlp Efolksk

Tahun pembuatan: 1999, Kondisi: sangat baik (bekas), TRIULZI-IG tilting glass table Hydraulic With swivel castors The rollers lower to allow 360-degree movement of the glass (for sealing purposes). 3600 mm length and 2400 mm working height Good working condition Good overall condition Ledpfx Aljiy Dtbokerk As is Immediately available

Kondisi: baik (bekas), Tahun pembuatan: 1994, 2-sided planer, top and bottom Constant table height (always consistent feed height) Lsdpfx Aohuthyslkerk Max. planing width: 600 mm Max. planing height: 280 mm Cutterheads with strip knives Immediately ready for operation

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, arus masuk: 238 A, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: Lodsvf E Avspfx Alkerk - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Clamping force: 500 t Screw diameter: 80 mm Ljdpfx Aleva H Amokork Shot weight: 1620 g Tie bar spacing (vertical): 900 mm Tie bar spacing (horizontal): 900 mm Shot volume: 1779 cm³ Injection pressure: 1855 bar Platen dimensions: 1300 x 1200 mm Type: Horizontal Drive: Hydraulic