Pusat pembubutan dan penggilingan CNC

MORI SEIKI NZ 2000 T3Y2

Kondisi: bekas, Tahun pembuatan: 2008, Detail Teknis: Diameter putaran standar: 200 Panjang putaran: maks. 810 mm Pengontrol: MSX-701 MAPPS III Diameter putaran di atas alas: 800 mm Jarak maks. antar pusat: 1130 mm Diameter putaran maks.: 320 mm Diameter benda kerja maks.: 300 mm Diameter batang: 65 mm Langkah sumbu X 1: 210 Langkah sumbu X 2: 210 mm Langkah sumbu X 3: 210 mm Langkah sumbu Y 1: 110 (+65/-45) mm Langkah sumbu Y 2: 110 (+45/-65) mm Langkah sumbu Z 1: 300 mm Langkah sumbu Z 3: 300 mm Langkah sumbu Z 2: 810 mm Langkah sumbu B: 870 mm Rentang kecepatan putaran - spindel: 5.000 rpm Jumlah rentang kecepatan putaran spindel: 2 Hidung spindel: JIS A2-6 Lubang spindel: 73 mm Diameter bantalan spindel: 120 mm Sumbu C: 0,001 ° Rentang kecepatan putaran - spindel: 5.000 rpm Hidung spindel: JIS A2-6 Lubang spindel: 73 mm Diameter batang maks.: 65/52 mm Diameter bantalan spindel: 120 mm Sumbu C: 0,001 ° Jumlah turret: 3 Jumlah stasiun alat: 16 x 3 = 48 posisi Tinggi batang untuk alat persegi: 20 mm Diameter batang untuk batang bor: 32 mm Waktu pergantian turret (4 stasiun): 0,18 detik Jumlah alat yang digerakkan: 16 x 3 = 48 posisi Kecepatan putaran maks. alat yang digerakkan: 6.000 rpm Kapasitas pemesinan alat putar: M16 / Ø16 Kecepatan cepat sumbu X: 30 m/menit Kecepatan cepat sumbu Y: 20 m/menit Ibodpjzd Su Ejfx Ah Ssb Kecepatan cepat sumbu Z: 50 m/menit Daya penggerak - motor spindel: 25 / 22 kW Daya penggerak - alat yang digerakkan: 7,5 / 5,5 kW Total kebutuhan daya: 92,7 kVA Berat mesin kira-kira: 9,4 ton Ruang yang dibutuhkan kira-kira: 4,0 x 2,8 x 2,4 m Aksesori: Konveyor serpihan Sistem pendingin Sumbu C spindel utama dan tandingan Sumbu Y 2 x Penghitung komponen Penghitung total Pengukuran alat Spindel 1, chuck tiga rahang SMW KNCS-N 210 / 52 mm Spindel 2, chuck collet Hainbuch Spanntop nova Kombi Axfix 65 Antarmuka robot Antarmuka pemuat batang NZ2000 T3Y2 memiliki 2 spindel dan 3 turret. 2 turret memiliki fungsi sumbu Y dengan motor frais terintegrasi. Hal ini memungkinkan pemesinan simultan dengan 3 turret. Pemesinan berkinerja tinggi dan berkecepatan tinggi dapat dilakukan dengan menggunakan maks. 48 alat yang digerakkan. Mesin ini telah dirawat oleh departemen pemeliharaan internal dan Mori Seiki.

Kondisi: baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Mesin pengasah alat CNC 5-sumbu, Anca RX7 - Tahun pembuatan: 2010 - Perangkat lunak: ToolRoom RN32 - Kecepatan spindel: 10.000 rpm - Penukar cakram ganda hingga 8 cakram Ijdpfezh Nuwox Ah Sobb - Loader alat PLX

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4012M-4212, rentang pengukuran sumbu X: 900 mm, rentang pengukuran sumbu Y: 1.000 mm, rentang pengukuran sumbu Z: 600 mm, berat benda kerja (maks.): 1.200 kg, Perlengkapan: Pelat tipe tersedia, Data teknis: Tipe mesin: Mitutoyo STRATO 9106 FAL-A910 Tahun pembuatan: 2001 Area pengukuran: 900 x 1000 x 600 mm Perangkat lunak: Mitutoyo Software v2.4.R11 Aksesori: Penjepit probe: Renishaw SP80 Probe: Renishaw SP80 Aksesori tambahan: bola kalibrasi keramik, berbagai bola probe dan ekstensi, rak pergantian Renishaw, set pemasangan dengan 4 x SCP80 dan dudukan probe Ibsdpfx Asqz T H Aoh Ssb Perubahan dan kesalahan dalam data teknis serta informasi, serta penjualan antara waktu dapat terjadi!

Kondisi: bekas, Tahun pembuatan: 1987, Technical details: Ibjdpfxoiay Sfe Ah Ssb Number of spindles: 8 Spindle bore: 51 mm Item: Multi-spindle automatic lathe Manufacturer: Schütte Model: AF51 Year of manufacture: 1987 Six-spindle automatic lathe 8 main spindles max. nominal bore D=51mm Control: SIEMENS SIMATIC S5 Gripper in position 7 for rear-side machining Thread cutting drive Independent feed in positions 2/3 electronic cam switch Balluff Plain text display Wöhrle Coolant auxiliary pump Magnetic cartridge filter Oil operation Including bar loader IEMCA PRA40/37/F, year 1987 (bundle magazine) Painted in light blue and light grey Tool configuration may differ from images. Please contact us for further information and pictures via mail(at) or

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Kontrol Heidenhain iTNC 530 Perjalanan X/Y/Z: 2200 x 560 x 720 mm Kecepatan spindel 18.000 rpm Luas bidang penjepitan 2600 x 600 mm Maks. beban meja 2200 kg Kepala putar Pendingin internal 25 bar Magazin alat untuk 30 alat, SK 40 Pilihan sumbu C atau A Probe pengukur Heidenhain TS 640 Ibedpfjzg Nmkjx Ah Seb Konveyor serpihan Filter pita kertas

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Hydraulically operated precision plunge grinding machines Rollomatic. Grinding process: cylindrical plunge grinding; workpiece diameter range: 0.2mm–6.35mm; shank diameter range: 1mm–6.35mm; total workpiece length range: 30mm–60mm; grinding wheel diameter: 200mm; grinding spindle speed: 6000 rpm; workpiece speed: 800 rpm. Machine dimensions (X/Y/Z): approx. 1100mm/800mm/1300mm; weight: approx. 600kg. Includes spare parts. Documentation available. Ibodpfow Dfd Nex Ah Sob

Kondisi: bekas, Tahun pembuatan: 2009, en_001 Ibjdpfot Rmdzox Ah Ssb

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jarak pergerakan sumbu X: 780 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 560 mm, berat benda kerja (maks.): 4.000 kg, jumlah slot dalam magazin alat: 120, produsen pengendali: Heidenhain, tinggi total: 2.800 mm, panjang total: 6.000 mm, lebar total: 6.000 mm, berat keseluruhan: 12.000 kg, panjang meja: 630 mm, lebar meja: 500 mm, model controller: iTNC530, daya nominal (semu): 61 kVA, pergerakan cepat sumbu Z: 50 m/menit, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, kecepatan spindel (maks.): 18.000 rpm, kecepatan spindel (min.): 20 rpm, beban meja: 4.000 kg, jam operasional spindle: 19.500 h, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, DMG DMC 60T RS3 with Heidenhain iTNC 530, no maintenance backlog, in good condition. Ideal machine for unmanned machining, geometrically within new machine tolerances. The machine can be measured/inspected on site upon request. Machine Data: Machine designation: Machining center with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: Good Equipment: • Direct path measurement in X/Y/Z (glass scales) • Chip conveyor • High-pressure coolant system, 40 bar • Extraction unit • NC rotary table • Tool magazine with 120 stations • Heidenhain touch probe • Rotating viewing window • High-pressure coolant (IKZ) 40 bar • Signal lamp • Chip flushing • Operating mode 4 Technical Data: Number of axes: 5-axis CNC control: Heidenhain iTNC530 NC rotary table clamping surface: 500mm x 630mm Weight: approx. 9,000 kg Chip conveyor: Yes Isdpfx Aerxrkloh Sobb Coolant system: Yes Internal coolant supply: Yes Travel paths and axes: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: -90°/+12° Feed rate and rapid traverse: X-axis: 50 m/min Y-axis: 50 m/min Z-axis: 50 m/min B-axis: - C-axis: 30 m/min Motor Spindle: Max. speed: 18,000 rpm Interface: HSK A63 Tool Changer: Automatic tool changer: Yes Number of magazine stations: 120 Pallet Changer: 5 pallets

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tekanan: 16 batang, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, suhu: 400 °C, tegangan masuk: 6.000 V, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, jenis pendinginan: udara, Industrial steam turbogenerator Howden – model KK&K TWIN CA46, NEW, never installed and never commissioned, still under manufacturer’s warranty. Following a revision of long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, complete according to original OEM supply. The machine is NEW, entirely manufactured and tested at OEM level, but never installed or put into service. It is still covered by the manufacturer’s warranty and is stored in an indoor, climate-controlled environment. Immediate availability eliminates standard production lead times, which for this type of equipment are generally 24–36 months. Main supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP section (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical power at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless execution, suitable for parallel operation with the grid Included systems: - Integrated oil system within the base frame - Main mechanical oil pump and auxiliary electric pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - Turbogenerator simulation model ENC-RfG Typical applications: - Industrial cogeneration (CHP) plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and service steam Condition and status: - Condition: NEW - Year of manufacture: end of 2024 - Never installed – never commissioned Isdpfsyidvdox Ah Sjbb - Still covered by manufacturer’s warranty - Complete OEM technical documentation available - Option of installation and commissioning with manufacturer’s support Possible application fields: - Biomass and waste-to-energy plants for the production of electricity and service steam, with immediate unit availability and without multi-year manufacturing lead times - Industrial cogeneration (CHP) in plants with continuous process steam demand (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants as a rapid alternative to new OEM supply with 24–36 month lead times Price: on request. Further technical information and documentation available upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Pressing force: 320 t Sheet thickness: 0 mm Strokes per minute: 80 spm Total pressing force: 320 t Stroke: 30 - 80 mm Clamping area (lower table): 630 x 740 mm Clamping area (upper table): 630 x 630 mm Total power requirement: 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in as-new condition with new CE marking. MAIN RAM Total force (nominal): 320 t Minimum stroke: 30 mm Stroke: 80 mm V-RING Nominal force: 160 t Stroke: 30 mm COUNTER RAM Nominal force: 80 t Stroke: 30 mm TOOL DIMENSIONS Lower table - width: 630 mm Lower table - depth: 740 mm Upper table - width: 630 mm Upper table - depth: 630 mm Max. daylight: 320 mm Isdpjvwgl Njfx Ah Ssbb ELECTRICAL SPECIFICATIONS Total power consumption: 60 kW