Mesin Pembubut Multi-Spindel

MORI SEIKI NZ2000

Kondisi: hampir baru (bekas), Tahun pembuatan: 2009, jam operasional: 1.800 h, Fungsionalitas: berfungsi sepenuhnya, * Mori Seiki NZ 2000 T2Y. * APPROXIMATE VALUE OF INCLUDED EQUIPMENT: 40,000–45,000 euros. * Both spindles equipped with two Hainbuch high-precision collet chucks. * Opposed spindle configuration. * 9-axis turning and milling center with CNC control. * Twin spindles. * Spindle size: A2-6. * 2 stacked turrets. * 2 C-axes. * 1 Y-axis. Fgedsx Ab Nispfx Acuok * Two integrated 22 kW motors. * Milling spindle power: 7.5 kW. * Two Renishaw automatic tool measuring arms. * Conversational automatic programming system Mapps 4. * Automatic load monitoring and tool consumption monitor. * Tool life management and consumption monitoring. * Double foot pedal for chuck open/close. * Oil chiller for both spindles. * Cutting torque: 340 Nm. * Both turrets with 16 stations each, all stations powered. * Capability for 32 tool settings on each turret. * Interface for bar feeder installation. * Rear automatic parts catcher, special collet type for long parts. * Large batch of external and internal tool holders. * Large batch of axial and radial driven tool blocks. * MQ system for tool clamping. * Maximum turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Maximum main spindle – sub-spindle distance: 1130 mm. * Main spindle speed: 5,000 rpm. * Sub-spindle speed: 5,000 rpm. * Driven tool speed: 6,000 rpm. * Maximum bar diameter: 65 mm. * X1 travel: 210 mm. * Y1 travel: +65 / -45 mm. * Z1 travel: 300 mm. * X2 travel: 210 mm. * Z2 travel: 810 mm. * Sub-spindle travel: 920 mm. * Rapid traverse (X1, X2): 30,000 mm/min. * Rapid traverse (Y1): 20,000 mm/min. * Rapid traverse (Z1, Z2): 50,000 mm/min. * C axis resolution: 0.001°. * Hinged side chip conveyor. * Communication ports via USB, PCMCIA card and RS-232. * Machine weight: 8,300 kg. * Machine can be inspected in operation. * Electrical transformer, documentation, parts list, electrical schematics, programming and operation manual included. * IMPORTANT: never used with bar feeder, only for aluminium prototype machining. * VERY low cutting hours. * Immediate delivery unless previously sold.

Tahun pembuatan: 2008, Kondisi: diremajakan ulang (bekas), Schwingender Grundkörper: 800 mm Schwingender Querschlitten: 800 mm Maximaler Abstand zwischen den großen Spindelnasen: 1.130 mm Maximaler Bearbeitungsdurchmesser: 320 mm Maximale Drehlänge: 810 mm Stangendurchlass: 52 mm X1-, X2-Achse: 210 mm Y1-Achse: 110 mm (+65, -45) Y2-Achse: 110 mm (+45, -65) Fodpfx Acexuguusuogk Z1-, Z2-Achse: 810 mm B-Achse (Spindel 2): 920 mm CNC-Steuerung: MSX-701 III Spindel 1, 2 Max. Spindeldrehzahl 1, 2: 6.000 1/min Spindelnase 1, 2: JIS A2-5 Spindelbohrungsdurchmesser 1, 2: 61 mm Revolverkopf: 16 Stationen x 2 Max. Werkzeugspindeldrehzahl, motorisiert: 6.000 1/min Vorschubgeschwindigkeit x1, x2: 30.000 mm/min Vorschubgeschwindigkeit y1: 20.000 mm/min Vorschubgeschwindigkeit z1, z2: 50.000 mm/min

Kondisi: bekas, Tahun pembuatan: 2011, Maximum turning diameter: 320 mm Maximum turning length: 810 mm Control unit: MSX-701 IV Swing diameter over bed: 800 mm Swing diameter over cross slide: 800 mm Distance between centers: 1,130 mm Maximum spindle speed: 5,000 rpm Main spindle drive power: 25 / 22 kW Maximum torque: 358 Nm Spindle diameter in front bearing: 120 mm Spindle bore: 73 mm Maximum usable bar diameter: 65 mm C-axis resolution: 0.001° Spindle nose: JIS A2-6 Collet chuck: 160 mm Maximum spindle speed: 5,000 rpm Sub spindle drive power: 25 / 22 kW Maximum torque: 358 Nm Spindle diameter in front bearing: 120 mm Spindle bore: 73 mm Maximum usable bar diameter: 65 mm C-axis resolution: 0.001° Spindle nose: JIS A2-6 Fedpfx Ajv E R E Necuegk Collet chuck: 160 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Max. speed of driven tools: 6,000 rpm Driven tool drive power: 7.5 / 5.5 kW Y-axis travel: 110 mm Shank diameter: 20 x 20 mm Drill shank diameter: 32 mm Turret indexing time: 0.18 sec Number of tool stations: 16 positions Number of driven tool stations: 16 positions Max. speed of driven tools: 6,000 rpm Driven tool drive power: 7.5 / 5.5 kW Shank diameter: 20 x 20 mm Drill shank diameter: 32 mm Turret indexing time: 0.18 sec X-travel 1/2: 210 mm Y-travel: 110 mm Z-travel 1/2: 810 mm Sub-spindle travel B: 870 mm Rapid traverse (X / Y / Z) 1: 30 / 20 / 50 m/min Rapid traverse (X / Y / Z) 2: 30 / - / 50 m/min Feed rate: 0 - 5,000 mm/min Total power requirement: 94 kVA Machine weight approx.: 8.3 t Space requirements approx.: 10.0 x 3.0 x 2.5 m CNC Turning and Milling Center MORI SEIKI - NZ 2000 T2Y - Main and sub spindle - 2 turrets, upper and lower - Y-axis - 2x 16 driven tool positions

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 810 mm, diameter putar di atas sled silang: 800 mm, diameter pembubutan: 320 mm, daya motor spindle: 25.000 W, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 73 mm, jarak pergerakan sumbu X: 210 mm, jarak lintasan sumbu Y: 110 mm, jarak gerak sumbu Z: 810 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 20 m/menit, pergerakan cepat sumbu Z: 50 m/menit, kecepatan rotasi (maks.): 6.000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: 800 mm Swing diameter over cross slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centers: 1,130 mm Maximum turning length: 810 mm Maximum workpiece dimensions: 300 mm TRAVELS Turret axes X1 and X2: 210 mm Turret axes Y1 and Y2: +65 / -45 mm Turret axes Z1 and Z2: 810 mm Head B-axis 2: 920 mm MAIN SPINDLE Maximum spindle speed: 5,000 rpm Motor power (30 min/continuous): 25/22 kW Maximum bar machining diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° SUB-SPINDLE Maximum spindle speed: 5,000 rpm Motor power (30 min/continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank cross-section: 20 x 20 mm Maximum boring bar diameter: 32 mm Turret indexing time (1 station): 0.18 s Maximum speed of driven tools: 6,000 rpm Driven tool power (5 min/continuous): 7.5/5.5 kW Fsdpfx Acowlvlgjujgk DIMENSIONS Installation area with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry-type parts unloading arm • Cutting load management and load monitor system • 1 double radial driven tool holder • 3 axial driven tool holders • 2 external tool holders • 2 double boring bar holders • 2 single radial driven tool holders • 2 internal boring bar holders • 2 Kitagawa BD 208 hydraulic chucks, dia. 210 mm • 1 set of jaws for each hydraulic chuck • Manuals and CE Declaration of Conformity Year of manufacture: 2010

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, 1 unit mesin bubut CNC bekas Mori Seiki NZ 2000 dengan sumbu C dan alat bertenaga. Data teknis dan foto tambahan akan ditambahkan. Fedpfx Acsxb T Uzeujgk