Mesin bubut vertikal

Mori Seiki VL-25A1

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations. Hsdeg Ezarspfx Ad Rjr

Kondisi: bekas, DATA TEKNIS - Jumlah poros: 4 - Jumlah spindel: 1 - Jumlah kepala revolver: 1 Hedpfx Adex Tvklj Rsr SPINDEL UTAMA - Hidung spindel: A2-8 - Daya penggerak spindel: 18,5 [kW] - Kecepatan spindel: 4.000 [RPM] - Diameter batang maksimum: 80 [mm] - Panjang pemesinan maksimum: 728 [mm] - Diameter pemesinan maksimum: 460 [mm] - Resolusi minimum sumbu C: 0,001 [derajat] KEPALA REVOLVER - Jumlah posisi: 12 - Jumlah posisi yang digerakkan oleh motor: 12 - Jarak perjalanan X/Z: 260/795 [mm] - Jarak perjalanan Y: +/- 50 [mm] - Jenis alat: BMT - Kecepatan alat yang digerakkan: 6000 [RPM] PENAHAN - Jenis penahan: Digital - Jenis kerucut: CM5 - Jarak perjalanan penahan: 650 [mm] PASOKAN LISTRIK - Tegangan suplai: 400 [V] - Total daya: 39 [kVA] BERAT DAN DIMENSI - Ruang yang dibutuhkan: 3.110 x 1.922 [mm] - Tinggi mesin: 2.120 [mm] - Berat mesin: 6.100 [kg] JAM MESIN - Jam saat mesin menyala: 26654 [jam] - Jam operasi: 15488 [jam] AKSESORIS - Pengontrol: CELOS - Pemrograman Teach-In: MAPPS 4 - Antarmuka: USB, PCMCIA, RJ45, RS232 - Perangkat pengukur alat: Renishaw - Tangki pendingin * dengan pompa bertekanan tinggi: 15 [bar] - Konveyor serpihan - Perangkat pengukur alat - Pengeluaran komponen - Konveyor komponen - Majalah batang: LNS QUICK LOAD SERVO 80 S2 - Jumlah dudukan alat tetap: 9 - Jumlah dudukan alat yang digerakkan: 3 - Transformator listrik - Cekam

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 8.700 h, Fungsionalitas: berfungsi sepenuhnya, it.hu.daewoo-lynx-200b-cnc Hodpox Nqlijfx Ad Rjr

Tahun pembuatan: 2019, jam operasional: 4.525 h, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12, MASCHINE ZUM SCHÄLEN UND RICHTEN VON STÄBEN IM SET Die Ausrüstung befindet sich in einwandfreiem Betriebszustand und kann unter Strom besichtigt werden. Komplett modernisiert im Jahr 2019 (neue Mechanik und Elektronik) Arbeitsbereich: Ø 20 – Ø 80 mm Stablänge: 2,5 – 6,0 m Bearbeitungstoleranz: ISO h9 (optional h8 möglich) Schäliefentiefe: bis zu 3,5 mm, abhängig vom Stahlsorte Stahlsorten: Kohlenstoffstahl, Wälzlagerstahl, Federstahl usw. Vorschubgeschwindigkeit: digital einstellbar 0,5 – 12 m/min Drehzahl des Schälkopfes: bis zu 1700 U/min Schneidwerkzeuge: zwei Sätze à 4 Messer mit automatischer digitaler Positionierung (Dreiecks- und Langmesser) Automatischer Ladetisch mit Stabzähler Zuführwalze mit motorisierter Höhenverstellung Einlaufandruckrollen – 4 vertikale Rollen mit umgekehrtem Gleichstrommotor Schälmaschine bestehend aus: Hjdjwqb Scepfx Ad Rer - Vordere Führungseinheit - Schälkopf mit 4 Messern - Hintere Führungseinheit Stabausfahrwagen Hauptmotor und Getriebe Abdrückrollen am Auslauf – Twin-System Ablagetisch mit motorisierter Höhenverstellung Sammelbehälter mit Zähler und automatischer Sammlung der Fertigstäbe Hydraulikeinheit – komplett neu Schaltschrank – neu, zweiteilig ausgeführt.

Kondisi: baik (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 750 mm, jarak gerak sumbu Z: 725 mm, CNC control Sinumerik 840D NC rotary table, B-axis Magazine for 320 tools Pallet changer unit, 2 pallets 500 mm x 500 mm Internal coolant supply ICS (80 bar) Chip conveyor Coolant system Technical data: X-travel longitudinal: 750 mm Y-travel vertical: 750 mm Z-travel cross: 725 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 50–10,000 rpm Tool positions in changer: 320 Hodpfxoq Ui Hqs Ad Rsr Feed rate: 60,000 mm/min Rapid traverse: 60 m/min Spindle drive power 40/100% duty cycle: 37/24 kW Machine weight approx.: 15,000 kg Technical data, accessories and description of the machine are not binding.

Tahun pembuatan: 2009, Kondisi: baik (bekas), nomor mesin/kendaraan: 120P1109, OFFER 21407 Motorized Container - Vessel Rotator with Rail-mounted Carriage Technical Data: - Total load capacity (driven + idler unit): 40,000 kg Hsdpfxshcnhms Ad Rer - Load capacity per vessel rotator: 20,000 kg - Workpiece diameter approx.: 500 – 3,500 mm - Roller support centers adjustable via trapezoidal threaded spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with dual-sided drive - Infinitely variable rotation speed - Hand-held remote for forward and reverse operation - Drive: 400 V - Both units mounted on rail carriages - Space requirement for driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement for idler unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight of driven unit: approx. 2,500 kg - Weight of idler unit: approx. 1,800 kg

Tahun pembuatan: 1980, Kondisi: baik (bekas), A very well-maintained, used cycle-controlled lathe from Weisser Heilbronn with SIEMENS control. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Travel, X-axis: 350 mm Travel, Z-axis: 1850 mm Spindle nose: DIN 55022, size 8 Number of spindle speeds: 18, 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Hsdpfx Adjgyy I As Rer Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. permissible torque at spindle: 2500 Nm Tailstock quill: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Dimensions (L x W x H): Machine weight: 5500 kg Accessories: Tailstock Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm Multifix quick-change toolpost in front of the centre, size 'C' 4-position turret behind the centre Tool holder Coolant system Travelling steady, pneumatically operated Technical data and dimensions subject to change. A video conference via WhatsApp is possible by appointment.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, jarak pergerakan sumbu X: 760 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 570 mm, tinggi benda kerja (maks.): 520 mm, berat benda kerja (maks.): 300 kg, jumlah slot dalam magazin alat: 34, tinggi total: 2.935 mm, panjang total: 3.600 mm, lebar total: 3.700 mm, lebar meja: 860 mm, model controller: FANUC, pasokan pendingin: 12 batang, jarak dari tengah meja ke hidung spindel: 780 mm, daya motor spindle: 15 W, pergerakan cepat sumbu Z: 40 m/menit, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, hidung spindel: ISO 40, kecepatan spindel (maks.): 10.000 rpm, kecepatan spindel (min.): 80 rpm, tinggi meja: 560 mm, beban meja: 300 kg, diameter alat: 80 mm, panjang alat: 300 mm, berat alat: 8 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Vertical machining center with automatic pallet changer "DOOSAN model VC500" equipped with Fanuc 21i-MB CNC Hedpfx Adeu T Hg Tj Rjr

Kondisi: diremaj di bengkel (bekas), nomor mesin/kendaraan: 550-235-ELD, GENERAL FEATURES Maximum rolling diameter 41 mm Maximum/minimum module range 1.5 / 0.39 Maximum rolling width 92 mm Maximum tool slide stroke 760 mm Hsdpjd Nw Ttsfx Ad Ror Maximum rack length 610 mm Maximum/minimum diametral pitch 20/40 - 32/64 Manufacturing No. 550-235-ELD ELECTRICAL SPECIFICATIONS Main motor power 15 HP

Kondisi: bekas, Tahun pembuatan: 2011, panjang pembubutan: 705 mm, diameter pembubutan: 356 mm, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 795 mm, gerak cepat sumbu X: 30.000 m/menit, pergeseran cepat sumbu Y: 10.000 m/menit, pergerakan cepat sumbu Z: 30.000 m/menit, Mori Seiki NL2500SY-700 Brand: Mori Seiki Model: NL2500SY-700 Category: CNC Lathe Year: 2011 CNC Control: Mori Seiki MSX-850 IV Machine weight: 6.2 tons Capacity Max swing over bed: Ø 579.8 mm Max swing over carriage: Ø 755 mm Max turning diameter: Ø 356 mm Max turning length: 705 mm Hedsyxmh Sspfx Ad Rsr Bar capacity: Ø 80 mm Axis travels X axis: 260 mm Y axis: ± 50 mm (100 mm total) Z axis: 795 mm C axis: ± 360° Main spindle Spindle diameter: 254 mm Speed: 4,000 rpm Spindle nose: ASA-8 C axis accuracy: 0.001° Power: 18.5 kW (cont/30 min) Sub-spindle Speed: 5,000 rpm Spindle nose: ASA-6 C axis accuracy: 0.001° Power: 15 kW (cont/30 min) Turret 12 driven stations Tool speed: 6,000 rpm Tool power: 5.5 kW Turning tools: 25x25 mm Boring: Ø 50 mm Feed rates X axis rapid traverse: 30,000 mm/min Y axis rapid traverse: 30,000 mm/min Z axis rapid traverse: 10,000 mm/min C axis: 400 rpm Accessories Fixed toolholders + 4 driven (2 radial, 2 axial) Chip conveyor + coolant tank Bar feeder Top Automazioni – Magic Electrical transformer Parts catcher arm Coolant tank 250 liters Manuals + electrical diagrams CE Declaration