Gergaji multirip poros ganda

MS-Maschinenbau HNS-2-75

Tahun pembuatan: 2004, Kondisi: bekas, en-Tank-&-Environmental-Protection-Wozniack Dear Sir or Madam, We offer a 25,000 Liter Double-Walled Storage Tank Diesel Tank ===== Nominal Capacity: 25 m³ Quantity: 1 Used, but completely overhauled; this means the tank has been cleaned, sandblasted, primed, and painted Colour Scheme: Painted in RAL colour of your choice; you are also welcome to specify your own colour preferences at any time. Material: Steel-in-steel construction, material grade S235JRG2 Documentation: Manufacturer’s certificate/inspection certificate according to DIN 6616 D/2 and nameplate Included: - 1 dipstick - 1 vent connection - 1 fill connection - 1 new max level sensor - 1 new leak detector unit with filled leak detection fluid - 1 ladder - 1 suction line Design: Cylindrical storage tank with feet/console Tank dimensions: Approx. 8,390 mm length, approx. 2,000 mm diameter Weight: Approx. 4,500 kg Storage: Aboveground Compact Diesel Dispensing Unit Piusi 70 L/min Pump: 230 Volt, max. 55 L/min (available as an option in 70 L/min) Of course, you can customise your tank system as well! We are happy to accommodate your colour and equipment requirements as far as possible. All our systems are thoroughly inspected and checked by our selected staff. On request, we also offer cost-effective delivery. You are welcome to visit and inspect our tanks at any time. Hfsdpfx Ajc Nkr Nshnsh Other aboveground and underground tank systems of all sizes are available for sale at our premises. We also purchase used tank systems at any time. Trade-in of existing systems is possible. Best regards from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

Kondisi: baik (bekas), Tahun pembuatan: 2006, nomor mesin/kendaraan: 108111, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 240 mm, tinggi penyerutan: 160 mm, tinggi kerja: 180 mm, Four-side planer after service inspection, machine weight 3,900 kg Hedevrq U Djpfx Ahnofh

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, masa garansi: 12 bulan, berat keseluruhan: 5.000 kg, arus masuk: 44 A, lebar meja: 1.200 mm, panjang meja: 2.700 mm, fi Hfjdpfxst Tyn So Ahneh

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, 1 refurbished Paul slat separator, 2-lamella design, with fixed lamella on the right and movable lamella on the left (for left-handed machine). Total length: 5.50 m Total width: 850 mm Roller spacing: 500 mm Roller width: 790 mm Maximum wood length: 5.00 m Equipped with 8 driven spiral rollers and 3 driven smooth rollers. 11 rollers dismantled and reassembled with new ball bearings. Movable lamella mounted on 4 ball-bearing-supported supports, easily movable, with new roller chain and 11 new deflection pulleys. Hjdpfx Ahetx A Sxenjfh Robust sheet metal lining between all rollers. As-new condition

Kondisi: bekas, nomor mesin/kendaraan: 008319, Arbeitsbereich Achse X: 6380 mm Hfedpfxox A Tc Io Ahnjh Arbeitsbereich Achse Y: 1380 mm Arbeitsebene: Mit Vakuum-Konsolenauflagen Leistung Haupt-Spindel: 11 KW Anz. kontrollierte Achsen: 5 Achsen Anzahl Werkzeugplätze: 32

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Cambio 500 debarking system consisting of: Hodpfewxdimjx Ahnefh Infeed centering unit. Cambio 500 debarker: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Hydraulic rotor and feed rollers. Discharge control unit. Tipping trough for long logs. Spare parts.

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW • 5th left spindle: 11.0 KW • 6th top spindle: 15.0 KW • 7th bottom spindle: 11.0 KW • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW • 10th universal spindle: 11.0 KW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences Hfjdpfswvqkljx Ahnjh • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralised lubrication points • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted.

Kondisi: baru, Brugger HX16 Pro professional petrol wood chipper. Hfedpfomfnz Eox Ahneh This wood chipper is designed for professional use. Thanks to its high-quality construction and powerful drive, even heavily branched material is no problem! It effortlessly processes logs with diameters up to 16 cm. Powered by a robust 35 HP Rato petrol engine, it is also equipped with a no-stress automatic feed system, which prevents the engine from stalling under overload. The HX16 Pro comes with an "AL-KO" chassis and lighting system to meet your requirements. Thanks to its road approval, the chipper can be transported anywhere. Features: - Maximum log diameter: 16 cm - Feed opening: 16.5 cm x 30 cm - 35 HP Rato petrol engine - No-stress automatic feed system - Hydraulic feed - Weight: 730 kg Delivery possible throughout Europe. -- Trailer chipper, wood chipper, wood shredding machine, branch chipper, professional chipper, wood shredding machine

Kondisi: baik (bekas), Board sorting line / Sorting system / Length sorting line Esterer Right-hand discharge 5 sorting bins Total length: 26 meters 1st bin: 2 meters 2nd bin: 3 meters 3rd bin: 4 meters 4th bin: 5 meters Hfedpjgw Scqefx Ahnjh 5th bin: >5 meters Good condition – immediately available Location: Germany, near Landau an der Isar Please also see my other listings. I look forward to your inquiry.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, This listing is for informational purposes only and does not constitute a legally binding offer. The KINGWAY MX-MRW14 model is a modern, compact track loader with skid-steer steering, designed for efficient operation in challenging terrain and confined spaces. Due to its compact design and high maneuverability, the MX-MRW14 is ideally suited for construction work, landscaping, and municipal applications. The KINGWAY MX-MRW14 is a reliable solution for professional users seeking a compact yet powerful machine that combines functionality, durability, and low operating costs. Mini Track Loader with Skid-Steer Steering KINGWAY MX-MRW14 Technical Specifications: Model: MX-MRW14 Operating weight: 620 kg Bucket capacity: 0.1 m³ Hfedpfx Aheyk Ekhjnjh Travel speed: 0–4 km/h Maximum lift capacity: 180 kg Maximum working height: 2,500 mm Maximum pin height: 1,967 mm Maximum dump height: 1,575 mm Reach at max. dump height: 480 mm Wheelbase: 905 mm Ground clearance: 130 mm Bucket dump angle: 70° Dimensions: Bucket width: 1,120 mm Overall length: 2,090 mm Overall width: 1,020 mm Overall height: 1,180 mm Turning radius: 1,140 mm Engine: Manufacturer: RATO Model: R420D Power output: 8.6 kW Maximum rpm: 3,600 rpm Cooling: Air-cooled Engine oil capacity: 1.1 l Fuel: Petrol Tyres: Tyre size: 18×8.50–8 NHS Tanks: Fuel tank: 5 l Hydraulic oil tank: 30 l Price: Net: €4,200 Gross: €4,998