Beli 4 Warna bekas (29.658)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used Cantilever Racking: Bolted System, Hot-dip Galvanised Version Scope of delivery: - 4 rack uprights, height 4,160 mm, with base section, usable depth 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction from IPE sections (bolted system) - Surface hot-dip galvanised - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity plates C4 according to DIN standard - Specialist telephone advice Gedsd Tqalepfx Adtjbg - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for doweling, and capable of bearing all applied loads. The customer is responsible for checking and ensuring the substrate condition, bearing capacity, and obtaining any necessary official approvals. Uprights are to be anchored to the ground by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, uprights should have at least 500 mm clearance above the top storage level.

Kondisi: siap digunakan (bekas), model controller: Haas, berat kosong: 12.000 kg, panjang total: 5.950 mm, lebar total: 3.048 mm, tinggi total: 2.200 mm, diameter ayun di atas peluncur silang: 2.000 mm, CNC-holspildel-draaibank-met-schuine-bed-voor-olievelden Draaibank met grote doorlaat, dubbele klauwplaat, en spanentransportband Swing boven bed: 1350 mm Swing boven dwarsslede: 400 mm Spindelboring diameter: 270 mm! Spindelvermogen: 55 pk Aantal toerentallen: 1 tot 500 omw/min Gbedpewu Ipiofx Adtsg

Tahun pembuatan: 1994, Kondisi: sangat baik (bekas), Four-sided planer/moulder HARBS, 8 heads. Long infeed table, 3 meters. Machine weight: 5,500 kg. Cardan shaft drive. Head configuration: bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal, top horizontal. Motors: 5.5 kW and 7.5 kW. Planing width: 230 mm. Planing height: 160 mm. Gedpfxjl Dw Nxo Adtsbg

Kondisi: sangat baik (bekas), CNC rotary table, Nikken 5AX-230, 4th and 5th axis for Mazak etc. Was installed on a VTC 300; now for sale due to upgrade to a new 5-axis machine. Gsdpfop U Umksx Adtsbg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, WEISHAUPT WM-G10/A-4; Dengan jalur gas - Daya: 110-1250 kW - Tahun pembuatan: 2011 - Tipe: ZM Godpfxswgym Dj Adtebg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: EAN0729389556525, panjang total: 34.000 mm, tinggi rak: 3.500 mm, panjang penyangga: 2.700 mm, panjang rak: 8.500 mm, tinggi rangka: 3.500 mm, beban per pasangan rangka atap (maks.): 3.000 kg, lebar rangka: 1.100 mm, jumlah baris rak: 4, ruang palet: 108 palet Euro, 4 rows of pallet racks (4 x M35112711-2) Each 8.5 m long, 3.5 m high, 1.1 m deep, Each with 3 bays, 2.7 m wide, Each with 2 beam levels, shelf load capacity 3000 kg. Scope of supply: - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, assembly materials - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Gedpfsv Ukz Aox Adtobg Freight / Delivery: - Max. 20 working days after receipt of payment - Free delivery to site/construction location - Unloading from the truck is to be carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands). Deliveries to EU member states upon individual agreement.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Gedpfxofdkb Tj Adtobg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: baik (bekas), 4 x Bonfiglioli wind turbine gearbox JB00001227 SN B6201603697 Gbedpjwg E Utsfx Adtog

Tahun pembuatan: 1980, Kondisi: bekas, Sharpening TOOL VOLLMER FINZ 4-800 Godpfx Adscw Dg Dotjbg Location Gorzów Wielkopolski Delivery conditions Collection by customer Delivery costs To be borne by the buyer Startup type To be agreed Description Notes Automatic carbide-tipped circular saw grinder, hydraulic

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, lebar bukaan pengisian: 1.250 mm, panjang bukaan pengisian: 1.000 mm, berat keseluruhan: 1.300 kg, Technical data: Gjdpfxovuphus Adtjbg Hopper opening: Length x Width 1250 x 1000 mm Length x Width 1250 x 1000 mm Cutting unit opening: Length x Width 562 x 462 mm Number of shafts: 4 of which: Cutting shafts 2 Number of cutting discs: 23 Shaft rotation speed: 25 rpm.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, 1. WEISHAUPT WM-G10/4-A (with gas train) - Capacity: 100–1100 kW Gedpfx Adewgyrtjtjbg - Version: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A (with gas train) - Capacity: 100–1000 kW - Version: ZM - Year of manufacture: 2013

Kondisi: baru, Tahun pembuatan: 2025, Alle Edelstahltrommel-Mischer – schnelle Lieferung eines Geräts Neu nach Bestellung gefertigt Trommel aus Edelstahl, gefertigt aus hochwertigem 316er Edelstahl Drehzahl der Trommel stufenlos regelbar von 0 bis 24 U/min Gsdpfx Aoif Upfjdtsbg Elektrische Kippentleerung Kapazität 50 kg bis 90 kg, abhängig vom Produkttyp 2 Modelle verfügbar

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm upright distance Including fastening material (floor anchors not included) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and expansion always available on request) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Includes fixing material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Pickup on site possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight forwarding with prior notification before delivery. Gjdpfx Adofdkb Uetjbg Materials are packaged for easy unloading. When installing outdoors, load capacities are reduced by wind and snow load. The foundation must be concrete, level, and suitable for dowelling as well as capable of bearing the applied loads. The substrate condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and is not recommended. According to professional association guidelines, it is recommended that the rack uprights have at least 500 mm projection above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg Gedpfx Adefdkbhstebg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay distance - Incl. mounting hardware (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and system can be expanded at any time) - (*Larger quantities available: approx. 90 uprights in stock) Detailed description: Gbodpfxjd Tbbdj Adtog - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Incl. mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notice. The material is packed sensibly to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The ground must be concrete, level, suitable for doweling, and capable of bearing the imposed loads. The customer is responsible for verifying and ensuring ground conditions, load capacity, and any necessary official permits. Uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm upright top projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Gbodpfx Asguk Dkodtsg Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Gbodpfx Adjguk Dvsteg - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, de-to-en-001 Gjdoguk A Hepfx Adtsbg

Kondisi: baik (bekas), jarak tempuh: 117.736 km, pendaftaran pertama: 12/2020, jenis bahan bakar: diesel, ukuran ban: 315/70R22,5, konfigurasi gandar: 6x2, jarak roda: 4.950 mm, bahan bakar: diesel, warna: merah, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, jumlah gigi: 12, kelas emisi: Euro 6, suspensi: udara, panjang total: 10.370 mm, lebar total: 2.550 mm, tinggi total: 3.580 mm, panjang ruang muatan: 7.900 mm, lebar ruang muat: 2.490 mm, tinggi ruang muatan: 2.200 mm, Tahun pembuatan: 2020, Perlengkapan: ABS, kendali jelajah, kontrol traksi, kunci sentral, pemanas parkir, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik, tail lift,

Kondisi: baik (bekas), morse-adapter-001 Godpjx R Szzefx Adtsbg

Kondisi: baik (bekas), jarak tempuh: 116.143 km, pendaftaran pertama: 12/2020, jenis bahan bakar: diesel, ukuran ban: 315/70R22,5, konfigurasi gandar: 6x2, jarak roda: 4.950 mm, bahan bakar: diesel, warna: merah, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, jumlah gigi: 12, kelas emisi: Euro 6, suspensi: udara, panjang total: 10.370 mm, lebar total: 2.550 mm, tinggi total: 3.550 mm, panjang ruang muatan: 7.900 mm, lebar ruang muat: 2.490 mm, tinggi ruang muatan: 2.200 mm, Tahun pembuatan: 2020, Perlengkapan: ABS, kendali jelajah, kontrol traksi, kunci sentral, pemanas parkir, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik, tail lift,

Kondisi: baik (bekas), Double bench grinder, double grinding machine, pedestal grinder, pedestal bench grinder Gbjdpov Hawqjfx Adtog -Manufacturer: Greif, Double bench grinder type D 20/4 -Grinding wheels: max. Ø 250 mm -Motor power: 0.37 kW -Speed: 1400 rpm -Operating voltage: 220/380 Volt -Dimensions: 500/310/H315 mm -Weight: 40 kg

Kondisi: baik (bekas), Three-phase electric motor, electric motor - Manufacturer: Loher, electric motor type A 100L1A-12/4 - Power: 0.18/0.55 kW - Speed: 465/1475 rpm - Shaft: Ø 28 x 60 mm - Protection class: IP 33 Gbodpfx Adevuzlfjtog - Dimensions: 385/275/H250 mm - Weight: 31.5 kg

Kondisi: baik (bekas), Three-phase electric motor - Power: 1.5/2.5 kW - Speed: 1470/2935 rpm - Shaft diameter: 28 mm Gbjdpodrnhqjfx Adteg - Design: B3 - Protection class: IP 44 - Dimensions: 500/250/H335 mm - Weight: 54 kg

Kondisi: baik (bekas), 5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve manifold, control block, switching directional control valve - Solenoid valve - Type: CPE18-M1H-5J-1/4 - Operating pressure: 2-10 bar - Quantity: 28 valves available Gedpjb Nktujfx Adtsbg - Price: per unit - Weight: 0.1 kg/unit