Beli Air Menetes Pan bekas (60.506)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), kapasitas pendinginan: 56 kW (76,14 hp), jenis pendinginan: air, frekuensi input: 50 Hz, kapasitas pemanasan: 67 kW (91,09 hp), jenis bahan bakar: gas, "SANYO" PANASONIC ECO G gas heat pump air conditioning unit Model: SGP-E190J2GU2W Engine: Nissan FY5 Power supply: 230 V AC, 1 phase, 50 Hz Maximum electrical power: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS) (cooling): 43.5 kW Heat input (HS) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure (high side): 30 bar Design pressure (low side): 16 bar Cpodped Tiu Eofx Adgst FOR OUTDOOR USE ONLY! We have 4 units in stock!

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Penyedot kabut cat dengan sistem suplai udara Pabrikan: Späne Dinding hisap kabut cat Spänex TAW 220 Kapasitas udara 6.000 m³/jam, Daya motor 1,35 kW Diameter pipa pembuangan 400 mm Luas dinding benturan 2000 mm x 1900 mm Kedalaman dinding hisap 800 mm Csdpfexl Um Tex Adgopt Unit suplai udara dengan pemanas Spänex WK 61 untuk ventilasi ruang pengecatan Model konstruksi kaset Kapasitas udara 6.000 m³/jam, Daya motor 2,5 kW Media pemanas PWW 90/70 Kapasitas pemanasan 77 kW Bagian saluran suplai udara Langit-langit outlet filter 1900 mm x 1900 mm x 300 mm Knee pipa penyambung, knee saluran Panel kontrol dan pengaturan untuk unit suplai udara dan penyedot kabut cat Sudah dibongkar dan siap angkut

Tahun pembuatan: 1991, Kondisi: bekas, Kapasitas: 15 hl Periferal: pompa Csdpfxow Tml Ee Adgopt

Tahun pembuatan: 1996, Kondisi: baik (bekas), Compressed air breathing apparatus, respiratory protection Cpjdpfxjb A H Afs Adgjt - 2-cylinder device - Positive pressure with: Pressure reducer - High-pressure gauge - Demand valve with: integrated warning device - Thread connection: M 45 x 3

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), The line includes the following equipment: 1. GUSBI – rotary table (carousel) with 24 stations and an automated polyurethane foam dispenser operating on the X and Y axes. Brand: GUSBI Italy Model: PF24 Serial number: 4625 Year of manufacture: 2004 Number of stations: 24 Table size: 600 mm x 500 mm Power supply: 30 KW Compressed air: 500 nl/min at 8 bar Output per 8h: 2,000 – 3,500 pcs, depending on filter size and mold cavity count 2. Rotary (roller-type) pleating machine for filter paper Brand: SAS Italy Model: PANELFILTER Type: 350/190 Power supply: 3.5 KW Compressed air: 6 bar Year of manufacture: 2004 Number of pleating modules/heights: 8 sets - Pleat height 20 mm - Pleat height 28 mm - Pleat height 32 mm - Pleat height 36 mm - Pleat height 38 mm - Pleat height 40 mm - Pleat height 48 mm - Pleat height 53 mm - Pleat height 60 mm Machine construction prepared for installation of a pleating unit for trapezoidal shapes. 3. Hot Melt adhesive dispenser: Brand: NORDSON USA Type: VA 025-4FFXX4, 400V Model: Versa Blue 8036-189 Serial number: LU04B01511 Year of manufacture: 2004 Cjdpogcvc Tofx Adgept Tank capacity: 50 kg Number of dispensing heads: 3 Power supply: 11 KW Compressed air: 6 bar 4. Aluminum filter molds – 131 pieces for 100 different car filter types. We also offer training and know-how transfer.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, jam operasional: 100 h, Fungsionalitas: berfungsi sepenuhnya, Seperti baru! Hanya digunakan selama 15 hari produksi. Furnace Udara Panas — Kapasitas: 2.000.000 kca Codjxq Rv Ispfx Adgspt Unit ini dalam kondisi sangat baik, praktis seperti baru, hanya dengan 15 hari operasional. Ideal untuk aplikasi pemanasan atau pengeringan industri. Untuk informasi atau foto lebih lanjut, silakan hubungi kami.

Kondisi: baru, Tahun pembuatan: 2025, Band width: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Cedpfe Ea U Hsx Adgjpt Stroke rate: max. 260 strokes/min at full feed length Feed force: 90 N Selectable with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Bandwidth: up to 76 mm Feed length: up to 76 mm Strip thickness: 0.076 - 1.91 mm Speed: up to 195 strokes/min at full feed length Feed force: 205 N with mechanical control valve or optionally as shown in the photo with solenoid valve (24V or 230V) Cpodoxaqvopfx Adgjt Also available in: - Bandwidths from 38 to 400 mm - Feed lengths up to max. 300 mm - Strip thicknesses 0.05 to 3.18 mm

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2025, unox_bakerlux_de Cedpfxsxmrkxj Adgopt

Kondisi: baik (bekas), de Cedpfx Adoma A Ivjgept

Kondisi: bekas, jarak tempuh: 182.153 km, daya: 110 kW (149,56 hp), pendaftaran pertama: 11/2020, jenis bahan bakar: diesel, konfigurasi gandar: 4x2, jarak roda: 3.000 mm, bahan bakar: diesel, Emisi CO₂: 211 g/km, kapasitas tangki bahan bakar: 70 l, warna: putih, tipe perpindahan gigi: otomatis, jumlah gigi: 7, kelas emisi: Euro 6, jumlah tempat duduk: 3, panjang total: 4.900 mm, lebar total: 1.900 mm, tinggi total: 1.990 mm, Tahun pembuatan: 2020, Perlengkapan: ABS, Android Auto, Apple CarPlay, Bluetooth, kantung udara, kemudi berkuasa, komputer bawaan, kunci sentral, pendingin udara, pengaturan jendela elektrik, program stabilitas elektronik (ESP), riwayat servis lengkap, sistem navigasi, spion elektrik,

Kondisi: bekas, Listing ini untuk MMM Stericell Hot Air Sterilizer. Kondisi kerja dan tampilan baik. Cpedpfjxzg N Eex Adgst Sterilisator udara panas STERICELL® dirancang untuk digunakan di fasilitas kesehatan untuk proses sterilisasi alat medis, baik tanpa maupun dengan kemasan, termasuk alat invasif yang direkomendasikan oleh pabrikannya untuk steril dengan udara panas/panas kering.

Kondisi: bekas, FlowCook sepenuhnya terbuat dari baja tahan karat cocok untuk pemanasan dengan oli termo (300 kW) panjang sabuk ±13.000 mm lebar sabuk ±600 mm sabuk keluaran sistem pencucian sabuk alat pengangkat elektrik untuk penutup tekanan uap: 4–8 bar dimensi keseluruhan (P x L x T): ±15.000 x 2.200 x 3.000 mm Cpedpfxex Ir Aae Adgot

Kondisi: sangat baik (bekas), GEA FlowCook 8000/600. Panjang pemasakan 8 meter, lebar 600 mm. Kondisi sangat baik, sangat jarang digunakan. Pemanas listrik, daya 283 kW. Cjdpfxjx Ili He Adgept

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2025, BARU Oven Pemanggang Unox Bakerlux 4 Shop.Pro Master BARU Oven konveksi Rossella Master dengan uap Oven sirkulasi udara untuk 4 loyang ukuran 600 x 400 mm Konstruksi stainless steel dengan kaca depan Pintu dengan kontrol program Master Rentang suhu dapat diatur dari 50 - 260°C Koneksi 400V, steker 16A-CEE Ukuran: 800 x 811 x 500 mm (PxDxT) Oven BARU dengan garansi + layanan suku cadang Cpedpexduwcefx Adgot Kualitas dari perusahaan spesialis! Manfaatkan pengalaman lebih dari 35 tahun! Opsi: Loyang panggang 600x400 Loyang berlubang aluminium 600x400 Filter air Pure Kontrak perawatan Layanan pengiriman Kotak suku cadang Paket servis Instruksi & pemasangan awal Kunjungi ruang pamer besar kami!

Kondisi: bekas, Suhu: Suhu ruang hingga 85°C Dimensi: L32 x T30 x D35 cm Cpjdpfxoxx Ndae Adgjt Tersedia 2 unit di stok! Kondisi bekerja baik. Silakan lihat juga listing kami yang lain.

Kondisi: bekas, jarak tempuh: 170.252 km, daya: 110 kW (149,56 hp), pendaftaran pertama: 01/2020, jenis bahan bakar: diesel, konfigurasi gandar: 4x2, jarak roda: 3.000 mm, bahan bakar: diesel, Emisi CO₂: 201 g/km, kapasitas tangki bahan bakar: 70 l, warna: perak, tipe perpindahan gigi: otomatis, jumlah gigi: 7, kelas emisi: Euro 6, jumlah tempat duduk: 2, panjang total: 4.900 mm, lebar total: 1.900 mm, tinggi total: 1.990 mm, Tahun pembuatan: 2020, Perlengkapan: ABS, Android Auto, Apple CarPlay, kantung udara, kemudi berkuasa, komputer bawaan, lampu kabut, pintu geser, program stabilitas elektronik (ESP), spion elektrik,

Kondisi: baik (bekas), 1. Pagomat – professionelle industrielle Etikettiermaschine. Automatische Etikettenaufbringung auf einer Förderlinie. Aus laufender Produktion entnommen und sofort einsatzbereit, ins Lager umgesetzt. Preis: 2.500 €. 2. Edelstahlbehälter – Inox-Behälter zur Lagerung von Flüssigkeiten, robust und langlebig. Stückpreis: 600 €. 3. Aufnahmebehälter – Puffertank / Luftabscheider mit Rohrleitungen. Edelstahl, stabile Ausführung, mit Steuerschrank ausgestattet. Preis: 500 €. 4. Reibe/Shredder – Metallkonstruktion mit Motor. Robuste Ausführung, geeignet für Werkstätten und Lebensmittelverarbeitung. Preis: 800 €. 5. Kačkavaljka – Inox-Maschine zur Verarbeitung und Mischung von Kačkavalj-Käse, mit Steuerpult und kompletter Rohranschlussausstattung, 500-l-Kapazität, aus laufendem Betrieb ins Lager umgesetzt. 8.500 €. 6. Pagomat – Trayverpackungsmaschine mit Möglichkeit der Schutzgasbegasung (MAP). Aus der Produktion genommen und eingelagert, Komplettanlage. Preis: 6.000 €. 7. Pagomat – professionelle Etikettiereinheit, komplett mit Befestigungen und Steuereinheit. Preis: 2.500 €. 8. Plattenwärmetauscher – Maximaler Wasserdurchfluss 3.000 l/h. Preis: 500 €. Codoxxvqmopfx Adgspt 9. Wasserfilter – Set aus zwei Einheiten, mit Anschlussarmaturen und Gehäuse. Geeignet für Industrie- und Lebensmittelverarbeitung. Preis: 100 €. 10. Plattenwärmetauscher – Alfa Laval. Kompaktes Mehrplattenmodell, ideal zum Kühlen und Erhitzen von Flüssigkeiten in der Lebensmittel- und Industrieanwendung. Preis: 4.500 €.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm Cpodpsvz Hq Tjfx Adgst - Weight: 500 kg - Flue outlet diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Kondisi: bekas, jarak tempuh: 154.348 km, daya: 107 kW (145,48 hp), pendaftaran pertama: 11/2019, jenis bahan bakar: diesel, konfigurasi gandar: 4x2, jarak roda: 3.100 mm, bahan bakar: diesel, Emisi CO₂: 186 g/km, kapasitas tangki bahan bakar: 80 l, warna: putih, tipe perpindahan gigi: mekanis, jumlah gigi: 6, kelas emisi: Euro 6, jumlah tempat duduk: 3, panjang total: 5.000 mm, lebar total: 1.960 mm, tinggi total: 1.970 mm, Tahun pembuatan: 2019, Perlengkapan: ABS, Bluetooth, kemudi berkuasa, kendali jelajah, komputer bawaan, kunci sentral, lampu kabut, pendingin udara, pengaturan jendela elektrik, pintu geser, program stabilitas elektronik (ESP), riwayat servis lengkap, sistem navigasi, sistem start-stop, spion elektrik,

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger usable areas such as workshops and workspaces in artisanal and industrial operations. These hot air systems require no lengthy pre-heating phases and can heat up the joinery or carpentry workshop, as well as other production facilities, in a very short time. Suitable fuels include solid wood and its byproducts, e.g. solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with the EU Directive 98/37CE Italian Presidential Decree N°459 of 24 July 96 and safety standard 89/392 CE Annex. All hot air furnaces in the MARTINA range 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission values required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air operation - Thermal output: 49.9 kW - Thermal output (Kcal): 43,000 - Fuel consumption: 15 kg/h - Air flow rate: 4,900 m³/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox underpressure: 0.2-0.3 mbar - Flue draught (rated output): 0.18 mbar - Heatable volume: approx. 1,000 m³ - Heatable area: approx. 220 m² - Required space: Width 720 mm, Depth 1000 mm, Height 1900 mm - Weight: 300 kg - Flue pipe diameter (nozzle): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90 % - Chimney draft: 13 Pa - Exhaust gas temperature: 290 °C Codevz Hq Hepfx Adgopt - Hot air outlet nozzles: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 pipe nozzles for hot air discharge are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per air outlet is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total connected load: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. These units have been developed for heating large commercial spaces, such as workshops and production halls in craft and industrial operations. These hot air systems do not require long heat-up phases and can quickly warm up carpentry or joinery workshops, as well as other production facilities. Solid wood and its by-products, such as leftover solid wood panels, wood chips, sawdust, pellets, or briquettes, can be used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety requirements of Directive 89/392 CE. All hot air furnaces in the MARTINA series (15, 30, 55, 85, 120, 180, 240, 350) meet both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) emission requirements. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output in kcal: 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Loading door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2-0.3 mbar - Rated flue draft requirement: 0.18 mbar - Heated room volume: approx. 7,500 m³ - Heated floor area: approx. 1,600 m² - Required space: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (socket): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85-90% - Chimney pressure: 11.5 Pa - Exhaust gas temperature: 289°C Cjdjvz Hqyjpfx Adgspt - Hot air outlet nozzle: 2 x Ø 450 mm - For further technical details, please refer to the attached data sheet The two pipe connectors for the outgoing hot air are located on the rear side of the furnace at the bottom. A maximum of 20 metres of duct per pipe connector is permitted for air distribution. Larger lengths are available in consultation with the manufacturer. Please contact us for this option.

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 Codovz Hqtjpfx Adgept The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 600x800x1900 mm Weight 230 kg Cedpfx Aevz Hqmsdgjpt Total power requirement 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft enterprises. They have been developed for heating larger functional spaces such as workshops and work areas in trade and industry facilities. These hot air systems require no lengthy warm-up times and can heat carpentry or joinery workshops, as well as other production facilities, in the shortest possible time. Fuel is solid wood and its by-products, e.g. offcuts from solid wood panels, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety regulation of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st BImSchV emission requirements. - Automatic and continuous air operation - Thermal output 29.8 kW - Thermal output in Kcal 25,700 - Fuel consumption 9 kg/h - Air output 2,400 m³/h - Combustion chamber depth 580 mm - Feed door 330 x 330 mm - Hot air fan 0.49 kW / 230 V - Negative pressure in combustion chamber 0.2–0.3 mbar - Flue draught at rated output 0.18 mbar - Heatable room volume approx. 600 m³ - Heatable area approx. 120 m² - Installation space: width 600 mm, depth 800 mm, height 1,900 mm - Weight 230 kg - Flue pipe diameter (spigot) 160 mm - Recommended chimney diameter 200 mm - Efficiency 85–90% - Chimney draft pressure 11 Pa - Flue gas temperature 286°C - Hot air outlet connections: 2 x Ø 200 mm - For more data, please refer to the attached data sheet The 2 hot air outlet pipe connections are located at the rear of the furnace in the lower section. For each outlet, a maximum of 20 meters of pipe is permissible for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm Codpfxsvz Hqgj Adgept - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.