Beli Alzstar 40 bekas (22.271)

Kondisi: bekas, Tahun pembuatan: 1998, lathe-data-001 Codexp Rzbepfx Aa Tspw

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fiat OM Forklift E 40 N Maximum Lifting Capacity: 4,000 kg Cpedpetyyiwjfx Aa Tjw Year of Manufacture: 2001 Unladen Weight: 4,310 kg 80V Maximum Lift Height: 3,300 mm

Kondisi: bekas, Tahun pembuatan: 2013, translation Cjdpoymg Hijfx Aa Tepw

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Cpsdpfefxyhfsx Aa Tow Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2023, jam operasional: 27 h, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 550 mm, kinerja area: 2.000 m²/jam, berat keseluruhan: 210 kg, kapasitas tangki air: 40 l, tegangan baterai: 24 V, The Kärcher B40 W Dose R55 is a 2023 model with only 27 operating hours to date. It has undergone a comprehensive refurbishment, with every component cleaned and function-tested. The Kärcher B40 W features an infinitely variable drive, significantly simplifying operation. Its controls are intuitive, eliminating the need for lengthy instruction periods. The integrated detergent dosing system ensures that the exact required amount of cleaning agent is dispensed for every cleaning process. The machine is equipped with new maintenance-free gel batteries, which can be conveniently recharged via the onboard charger. The suction bar has been sandblasted, powder-coated, and fitted with new squeegees in our workshop. Additionally, two new roller brushes have been installed. Csdpfx Aaeyrqy De Topw Thanks to the roller brush deck, coarse debris such as wood splinters is swept wet into a separate coarse dirt tray. The Kärcher B40 W Dose R55 is ideal for daily cleaning of areas such as workshops, warehouses, or retail stores. Technical Data: Working width: 55 cm Tank capacity: 40 litres fresh / 40 litres waste water Theoretical area performance: approx. 2,000 m²/h

Kondisi: bekas, radialdrill-2024 Cpedpfxoyrtxve Aa Tjw

Kondisi: baru, Pressing force: 40 t Max. stroke: 300 mm Max. bending capacity – flat: 250 x 16 mm Working speed: 10 mm/sec Control system: NC Tool height: 250 mm Total power requirement: 4 kW Machine weight approx.: 1,190 kg Space requirements approx.: 650 x 1,250 x 1,300 mm The Gerd Wolff HP 40 is a hydraulic horizontal press with a wide range of combination options. Cpsdpjymf Nvefx Aa Tow Whether bending pipes, punching profiles, or cutting sheet metal—with the appropriate accessories, the HP 40 is a multifunctional press. Standard equipment - Ergonomic tool clamping table - Quick and easy tool change - Hydraulic speed and pressure adjustment - Easily adjustable back gauge - Induction-hardened support pins - NC control system Highlights - Operator panel with digital display - Simple tool change - Hardened support pins - Hydraulic speed regulation The HP 40 is manufactured in Turkey by a renowned producer for our distribution brand "GERD WOLLF Maschinenfabrik". Images are for reference only and do not represent the machine to scale.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, jam operasional: 189 h, kapasitas angkut: 40.000 kg, jenis bahan bakar: listrik, model baterai: EPzS, kapasitas baterai: 1.250 Ah, tegangan baterai: 80 V, warna: abu-abu, Perlengkapan: kabin, pencahayaan, Manufacturer: Multi-Trans Type: Electric platform truck with cab Model: SET 40 Load capacity: 40,000 kg Year of manufacture: 2018 with TÜV certificate for obtaining a special permit according to § 70 of the German Road Traffic Licensing Regulations (StVZO) for public road use Loading area: External vehicle dimensions approx. 8,200 x 2,500 mm, clear loading area behind the cab approx. 6,590 x 2,500 mm Loading height: approx. 1,005 mm Loading platform cover: Tread plate Steering: Two-axle steering Drive type: Electric Operating hours: 189 Battery: 80 V 10 EPzS 1250 Ah, K5 Paint finish: Base frame powder-coated RAL 7037 Dust Grey, cab powder-coated RAL 5000 Violet Blue Technical condition: very good Visual condition: very good Cpedpfxoyrf Uio Aa Tew Available: upon request Running gear: Two steered axle lines with two pendulum axles each and two unsteered driven axle lines, mounted on four longitudinal rockers for even wheel load distribution Cab with controls and display instruments: - At the front end, centrally in the direction of travel, a comfort driver cab, installed sound- and heat-insulated - Driver cab is mounted on the vehicle base frame with rubber silent blocks for spring suspension - Tubular guard bars at the rear and on the cab roof for protection against falling objects - Windscreen and rear window made of safety glass according to ECE R 43 - Cab with two lockable doors, including sliding windows - Front and rear windscreen with two-stage electric wipers - Sun visor for driver - Interior mirror - Interior cab lighting - Steering wheel adjustable (height, tilt), quick-adjust - Hydraulic power-assisted steering - Electric fresh air blower with electric heater, defroster nozzles for front and side windows, two-stage blower ventilation, continuously adjustable cab temperature via thermostat - Driver's seat air-suspended, suspension force adjustable to body weight, height adjustable - Passenger seat mechanically suspended comfort seat - Direction selector forward/reverse via neutral position on steering wheel - 2-speed gear selection, creep mode up to 3 km/h, fast mode 6 km/h - Infinitely variable driving speed via foot control pedal - Brake pedal - Battery discharge indicator with operating hours counter (records only during driving) - Main key switch - Emergency stop selector switch - Hazard warning light system - Direction indicator with visual display and acoustic signal - Signal horn - Light switch - Two external mirrors mounted on or in front of the cab, mirror arms mechanically swivelling and lockable - High-quality air conditioning system mounted on cab roof Special equipment: - Access to the loading area behind the cab on the left-hand longitudinal side in the direction of travel, with one removable or fixed handrail; storage space for handrail provided on the vehicle if not in use - At the front end: 300 mm high stop strip fitted - Vehicle can be maneuvered from the cab or via a radio remote-controlled handheld device outside the cab - Nine lashing or crane bars made of round steel welded horizontally into the outer frame on each longitudinal side - Ultrasonic sensors for distance measurement (object detection, not a personal safety device), creep and emergency stop disconnection variably adjustable - Reversing camera system with monitor Safety features: - Two emergency stop buttons - Acoustic warning signal during reverse travel only - Rotating beacon mounted on driver's cab, active only during operation

Kondisi: sangat baik (bekas), Binder Model: MKF 720 E3.1 Temperature Cycling Climate Chamber Air-cooled Temperature range: -40°C to +180°C Humidity range: 10% rH to 98% rH The MKF temperature cycling climate chamber is a specially developed environmental simulation chamber designed for industrial material testing and environmental simulation applications, offering unparalleled performance far exceeding the capabilities of standard heating chambers. It is capable of handling all tasks required for material testing as well as aging and stress tests. TECHNICAL DATA: Housing dimensions: Width: 1615 mm Height: 2005 mm Depth: 1230 mm Internal dimensions: Width: 1200 mm Height: 1020 mm Depth: 600 mm Internal volume: 734 liters Net device weight (empty): 590 kg Maximum total load: 160 kg Maximum load per shelf: 40 kg Performance Data — Temperature: Temperature range: -40°C...180°C Temporal temperature fluctuation: 0.1...0.5 ± K Spatial temperature deviation: 0.1...1.8 ± K Average heating rate according to IEC 60068-3-5: 4.8 K/min Average cooling rate according to IEC 60068-3-5: 4.8 K/min Max. heat compensation: 6500 W Performance Data — Climate: Temperature range: 10...95°C Humidity range: 10...98% rH Temporal temperature fluctuation depending on setpoint: 0.2...1.5 ± K Max. heat compensation: 1000 W Electrical Data: Rated voltage: 400V 3N~ ±10% 50Hz Rated power: 11 kW 19.2 A Refrigerant: R404A 5 kg Important Notice: “The table shown in the photos is not included in the sale.” Safety information for buyers: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate Cpsdpfeymcqdjx Aa Tow 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and data subject to change and errors!) For further questions, we are happy to assist you by phone.

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 100 h,

Tahun pembuatan: 2016, Kondisi: bekas, Tersedia untuk dijual 3 unit pemisah logam dari merek Sesotec. Detektor logam GF kami untuk aplikasi pneumatik menawarkan perlindungan optimal terhadap penghentian produksi, downtimes, dan keluhan pelanggan. Cpsdpjyrl Nyefx Aa Tsw Cocok untuk baja, tembaga, logam non-ferro, baja tahan karat.

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 15.936 h, Fuel type: Electric Unladen weight: 6,477 kg Dimensions (L x W x H): 290 x 125 x 318 cm Lifting capacity: 4,000 kg Lift height: 491 cm Fork dimensions: 1,200 x 1,150 mm - Year of manufacture: 2007 - Documentation available: Yes - Type of documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 516327000881 - Operating hours: 15,936 - Lifting capacity: 4,000 kg - Lift height: 4,910 mm - Overall height: 3,180 mm - Free lift: 0 mm - Fork length: 1,200 mm - Maximum fork width: 1,150 mm - Minimum fork width: 440 mm - Number of wheels: 4 wheels Cpodpfx Aaeymdx Ns Tew - Attachments: Sideshift, fork positioner - Options: Joystick, full cab, heater, work lights, radio - Mast: Duplex - Drive: Electric - Capacity: 930 Ah - Battery voltage: 80 V - Transport dimensions: 2,900 mm x 1,250 mm x 3,180 mm (L x W x H) - Transport weight [kg]: 6,477 kg - Transport packages [pcs.]: 1 Financial information VAT: The price stated is net, plus VAT VAT/margin taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Tess van den Boom

Kondisi: sangat baik (bekas), Machine package with 30 units 110V. A voltage converter (110V to 230V), a heavy-duty extension cable, and a 4-way power distributor are included in the price. 1. Hilti TE 35 2. Hilti TE 40 AVR 3. Hilti DEG 4. Hilti WSR 1400-PE 5. Hilti DC 230 6. Hilti SD 2500 7. Hilti ST 1800 8. Hilti SD 2500 9. Hilti SD 2500 10. Hilti SI 100 11. Kress HMX 24 600W 12. Kress HMX 24 600W 13. Kress HMX 24 600W 14. Hilti TE 6S 15. Hilti DEG 16. Hilti TE 2 17. Hilti WSJ 850-ET Cjdpfx Aaevzcrme Tjpw 18. Hilti WSJ 850-ET 19. Hilti SR 16 20. Hilti SR 16 21. Hilti SR 16 22. Hilti SR 16 23. Hilti SR 16 24. Hilti UD 30 650W 25. Hilti UD 30 650W 26. Hilti UD 30 650W 27. Hilti TE 2 650W 28. Hilti TE 2 600W 29. Hilti DEG 30. Hilti ST 1800 600W

Kondisi: baik (bekas), nomor mesin/kendaraan: 2582, Tahun pembuatan: 2008, kapasitas angkut: 40.000 kg, panjang total: 2.420 mm, lebar total: 6.000 mm, berat operasi: 7.600 kg, ELME 20-40" dari Uniktruck Cpsdpfx Aaow Nbntj Tsw

Kondisi: baru, Tahun pembuatan: 2025, de Cedpfx Aoiyun Rsa Tepw

Kondisi: baik (bekas), konfigurasi gandar: 3 gandar, pendaftaran pertama: 07/2020, panjang total: 13.520 mm, lebar total: 2.550 mm, tinggi total: 1.300 mm, suspensi: udara, ukuran ban: 385 / 65 / R22.5, jarak roda: 6.920 mm, warna: hitam, Tahun pembuatan: 2020,

Kondisi: bekas, Tahun pembuatan: 2022, termasuk 2 bak lem Ketebalan pelapisan tepi rol: 0,4 - 3 mm Ketebalan pelapisan tepi strip: 5 mm Tinggi benda kerja min - maks: 8 - 50 mm Kecepatan makan: 9 m/menit Unit pra-routing Unit lem Unit pemotong Unit pembulat Unit frais sejajar Pisau tarik radius Pisau tarik bidang Unit polisher Perangkat semprotan Lokasi penyimpanan: Pelanggan Cpsdpfx Aew Aig Sea Tsw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, jam operasional: 100 h, berat keseluruhan: 435 kg, kapasitas angkut: 40 kg, jangkauan lengan: 2.500 mm, Robot lengkap dengan aksesori, dapat diuji di lokasi dalam kondisi terhubung listrik. Cpjdpfx Aoyrd Sgja Tjw

Kondisi: bekas, jarak tempuh: 8.405 km, daya: 243 kW (330,39 hp), pendaftaran pertama: 06/1995, jenis bahan bakar: diesel, ukuran ban: 295/80R22.5, konfigurasi gandar: 6x2, jarak roda: 4.800 mm, bahan bakar: diesel, warna: kuning, tipe perpindahan gigi: mekanis, jumlah gigi: 16, kelas emisi: euro1, suspensi: baja, lebar total: 2.500 mm, panjang ruang muatan: 6.100 mm, lebar ruang muat: 2.500 mm, tinggi ruang muatan: 1.200 mm, Tahun pembuatan: 1995, Perlengkapan: derek,

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2013, jam operasional: 2.100 h, diameter putar di atas sled silang: 200 mm, lubang spindel: 66 mm, diameter pembubutan di atas alas geser: 435 mm, tinggi pusat: 217 mm, panjang pembubutan: 1.000 mm, panjang total: 3.061 mm, kecepatan spindel (maks.): 3.500 rpm, kecepatan spindel (min.): 1 rpm, lebar tempat tidur: 202 mm, For sale: WEILER E40 precision lathe – only 2,100 hours on the clock, machine condition like new. Features a 435 mm swing over bed, 200 mm swing over cross slide, 66 mm spindle bore, and 1,000 mm turning length. Ideal for workshops requiring accuracy and durability. Contact us for price and further details! Cpsdpfjv A Irzjx Aa Tjw

Kondisi: baru, Tahun pembuatan: 2025, HP 40 Inverter Pressure 8 bar Cedpfx Ajvntc Nea Tjpw

Kondisi: baik (bekas), panjang penggilingan: 400 mm, lebar penggilingan: 150 mm, Tischlänge 400 mm Tischbreite 150 mm Schleiflänge 400 mm Schleifbreite 150 mm Ausführung: hydraulisch Max. Abstand vom Tisch zur Spindelmitte 350 mm Tischvorschub: stufenlos von .00 m/min bis 0.0 m/min Automatischer Vertikalvorschub: von 0.000 mm Cpsdevga Suopfx Aa Tsw bis 0.013 mm Schleifscheibendurchmesser 00 mm Schleifscheibenbreite 16 mm Schleifscheibendrehzahlen: von 800 U/min Spannung 50 Hz 3x 380 Volt Schleifspindelmotor .30 PS Maschinengewicht ca. 900 kg Abmessungen Maschine: Länge 1300 mm Breite 1 00 mm Höhe 1500 mm

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin pengemas kantong untuk film datar. Format yang saat ini terpasang cocok untuk film datar dengan lebar 270 mm. Mesin ini dilengkapi dengan dua format tambahan yang lebih kecil. Cjdpfox Tawcox Aa Topw

Kondisi: bekas, WORTHINGTON - CREYSSENSAC screw compressor, model Rollair 40 -- RLR 40BM6 Cjdpfefmim Ujx Aa Tjpw Serial No.: 6240330200 Year of manufacture: 2003 Free air delivery: 4.6 m³/min Operating pressure: 10 bar Main motor power: 30 kW Mains connection: 400 Volt, 50 Hz Connection thread: 1 1/2 inch - 36,004 switching hours (read off) - 19,256 load hours (read off) - Sound-insulated Required space (L x W x H): 1850 x 1050 x 1760 mm Weight: 910 kg Good condition

Kondisi: bekas, CLOOS CPS 40/80 plasma cutting machine Cpjdpjdzqccefx Aa Tjw Year of manufacture: 1990 Power at 60% duty cycle: 80 A Power at 100% duty cycle: 40 A Adjustable current: 40 and 80 amps (2 settings) Maximum cutting capacity (steel): 25 mm Torch package length: 5.5 m Mains connection: 400 V with 32 A plug - Hand torch CLOOS Dimensions (L x W x H): 700 x 600 x 750 mm Weight: 160 kg Good condition