Beli Andromeda 210 Super bekas (4.324)

Kondisi: baru, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Blade speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight: approx. 0.42 t Space requirement: approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal bandsaw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy Codpfx Aajfgyh Uj Topw • Mitre cuts left 60° and right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece, very quiet and low-vibration cutting • Hydraulically operated, laterally adjustable vice • Guided, high-quality industrial bearings • Heavy-duty vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Support roller (entry side) • Ball-bearing turntable Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid downfeed to the workpiece or direct cutting in case of series cuts 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Kondisi: bekas, daya: 129 kW (175,39 hp), Tahun pembuatan: 2020, Perlengkapan: pendingin udara, de-to-hu-it-lt-lv-nb-nl-pl Cpjdpfx Asyrp Sfoa Tjw

Kondisi: bekas, jarak tempuh: 243 km, daya: 368 kW (500,34 hp), pendaftaran pertama: 02/2026, jenis bahan bakar: diesel, konfigurasi gandar: 4x2, jarak roda: 3.750 mm, bahan bakar: diesel, rem: retarder, warna: hitam, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, panjang total: 5.960 mm, lebar total: 2.550 mm, tinggi total: 3.960 mm, Tahun pembuatan: 2026, Perlengkapan: ABS, Bluetooth, kendali jelajah, kulkas, kunci diferensial, kunci sentral, lampu kabut, pemanas parkir, pendingin udara, pengaturan jendela elektrik, retarder, sistem navigasi, spoiler, tangki bahan bakar kedua,

Kondisi: baik (bekas), jarak tempuh: 311.000 km, daya: 353 kW (479,95 hp), pendaftaran pertama: 09/2022, jenis bahan bakar: diesel, ukuran ban: 385/65R22.5, konfigurasi gandar: 4x2, jarak roda: 3.800 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 845 l, rem: intarder, warna: putih, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, jumlah gigi: 12, kelas emisi: Euro 6, suspensi: baja-udara, volume ruang muat: 1 m³, Tahun pembuatan: 2022, Perlengkapan: ABS, AdBlue, kemudi berkuasa, kendali jelajah, kontrol traksi, kunci sentral, lampu kabut, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spoiler,

Kondisi: baik (bekas), jarak tempuh: 735.000 km, daya: 337 kW (458,19 hp), pendaftaran pertama: 10/2017, jenis bahan bakar: diesel, ukuran ban: 385/65r22.5, konfigurasi gandar: 4x2, jarak roda: 3.800 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 845 l, rem: intarder, warna: putih, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, jumlah gigi: 11, kelas emisi: Euro 6, suspensi: baja-udara, Tahun pembuatan: 2017, Perlengkapan: ABS, AdBlue, kendali jelajah, kontrol traksi, kulkas, lampu kabut, pemanas parkir, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spoiler,

Kondisi: sangat baik (bekas), jarak tempuh: 404.800 km, daya: 353 kW (479,95 hp), pendaftaran pertama: 12/2021, jenis bahan bakar: diesel, ukuran ban: 385/55R22.5, konfigurasi gandar: 4x2, jarak roda: 38.000 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 1.275 l, rem: intarder, warna: putih, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, jumlah gigi: 10, kelas emisi: Euro 6, suspensi: baja-udara, Tahun pembuatan: 2020, Perlengkapan: ABS, AdBlue, kendali jelajah, kontrol traksi, kulkas, kunci sentral, lampu kabut, pemanas parkir, pendingin udara, pengaturan jendela elektrik, spoiler, tangki bahan bakar kedua,

Kondisi: sangat baik (bekas), jarak tempuh: 638.800 km, daya: 353 kW (479,95 hp), pendaftaran pertama: 09/2021, jenis bahan bakar: diesel, ukuran ban: 385/55R22.5, konfigurasi gandar: 4x2, jarak roda: 38.000 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 1.275 l, rem: intarder, warna: putih, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, jumlah gigi: 12, kelas emisi: Euro 6, suspensi: baja-udara, Tahun pembuatan: 2021, Perlengkapan: AdBlue, kemudi berkuasa, kendali jelajah, kulkas, kunci sentral, lampu kabut, pendingin udara, pengaturan jendela elektrik, spoiler, tangki bahan bakar kedua,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 59.234 h, Fungsionalitas: berfungsi sepenuhnya, This machine is offered for sale by a European corporation and is in exceptionally well-maintained condition. Additional photos and videos are available at any time upon request. Technical Details – DMC 210 FD Machine Type: 5-Axis Machining Centre Series: DMC 210 FD Machine Category: Metal Cutting Manufacturing Equipment 3-Axis Milling Machine NC Program Controlled Year of Manufacture: 2011 Condition: Very Good Operating Hours: Approx. 59,000 h Weight: 50,000 kg Control / CNC: CNC Control: Siemens 840D Solutionline Number of Axes: 5-Axis Machining Centre Type of Control: Fully Automatic (Code 017) Spindle / Tooling: Tool Interface: HSK 100 DIN 69871 HSK100 Spindle Type: HSK100 Maximum Speed: 6,300 rpm Maximum Feed Rate: 60 m/min Maximum Tool Weight: 35 kg Maximum Tool Length: 450 mm Maximum Tool Diameter: 250 mm Tool Magazine / Measurement Technology: Tool Magazine: 280 positions Probe: Renishaw MP10 Travel Distances: X-Axis Travel: 1,800 mm Y-Axis Travel: 2,100 mm Z-Axis Travel: 1,250 mm Table / Workpiece: Table Length: 1,850 mm Table Width: 1,850 mm Maximum Workpiece Length: 1,500 mm Maximum Workpiece Weight: 5,000 kg Power Supply / Electrical Specifications: Power Supply: 400 V, 3/N, PE, 50 Hz Power Consumption: 167 kVA Maximum Current: 241 A Maximum Fuse Rating: 250 A DC Control Voltage: 24 V DC AC Supply Voltage: 230 V AC Total Installed Power: 163 kW Equipment: Platform: Included Cpodpfx Aex Sylkea Tjw Coolant System: Included Chip Extractor: Included Operating Manual / Documentation: Included

Kondisi: bekas, nomor mesin/kendaraan: 006849, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA Jointing unit: yes Multi-function unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Cpsdpswd Itmefx Aa Tew Working units: 7 pcs

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, NAKAMURA WY250 SUPERMILL LATHE YEAR 2007, FULLY FUNCTIONAL WITH DOUBLE Y AXIS - FANUC 31iA2 CNC control - Main spindle bar capacity: 65mm, Power: 18kW, ASA 6, 4,500 RPM - Sub-spindle bar capacity: 51mm, Power: 11kW, ASA 5, 5,000 RPM - Driven tools power: 7kW with 40Nm torque on both turrets (65mm bore SUPERMILL) Cpedpfx Asyrb Tnja Tew - Y-axis on both turrets (Y travel - upper: +50/-50mm, lower: +20/-50mm) - Type G part catcher - Distance between spindle noses: 870mm - Maximum turning diameter: 225mm - Rapid traverse Z: 36 m/min – X: 18 m/min - Expanded 500L coolant tank with chip conveyor - Turret coolant pumps: GRUNDFOSS CRK4-100/10, dual stage, 3-12 bar with filters - Spindle top washing - Air blow and washing through sub-spindle - Auto shut-off - 3-color signal light - NT Nurse axis load monitor - IEMCA MASTER 880 bar feeder, year 2003 - Equipped with toolholders and collet holders as detailed below: Supplied with the machine: - 4 external toolholders - 4 toolholders for simultaneous mounting of 2 opposing tools - 6 boring bar holders - 1 H32 parting blade holder - 4 radial driven toolholders (HEIMATEC brand) - 4 axial driven toolholders - 1 Bellegrandi MSCNT70-A6” collet holder for BA and BD collets, size 70 (complete with respective bushings, for main spindle side) - 1 Bellegrandi MSCTNR70-A5” collet holder for BA collets, size 70 (complete with spring ejector, for sub-spindle side) - Complete set of hand jaws for the part unloader

Kondisi: sangat baik (bekas), jarak tempuh: 133.000 km, daya: 294 kW (399,73 hp), pendaftaran pertama: 12/2016, jenis bahan bakar: diesel, konfigurasi gandar: 8x2, bahan bakar: diesel, rem: pengereman mesin, warna: biru, kabin pengemudi: kabin harian, tipe perpindahan gigi: mekanis, jumlah gigi: 16, kelas emisi: Euro 6, panjang total: 11.610 mm, lebar total: 2.550 mm, tinggi total: 3.700 mm, volume ruang muat: 15 m³, Tahun pembuatan: 2016, Perlengkapan: ABS, kendali jelajah, kunci sentral, lampu kabut, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik,

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 150 kg, produsen pengendali: Kuka, model controller: KRC4, masa garansi: 12 bulan, PRICE ON REQUEST! Price on request: - The price for the products offered is not listed directly and must be requested. Condition of products: - The offered products are used, but have been completely overhauled, and all wear parts (O-rings, precision bearings, shaft seals, screws, retaining rings, Castrol oil) have been replaced. Measurements and testing: - Precise measurements have been carried out, especially on the axes and gear backlash. An 8-hour load test has also been conducted. (Gear backlash: Axis 4 - 0.01 / Axis 5 - 0.01 / Axis 6 - 0.01). Delivery and packaging: - Products are delivered in a special box, and insured shipping is included. Central hand exchange: - It is possible to receive the central hand as an exchange. Alternatively, it can be purchased without exchange upon request. Warranty: - Each central hand comes with a 12-month warranty. For an additional charge, this can be extended to 18 months. Stock availability: - The supplier has more than 100 central hands in stock, with various models available. Express overhaul: - A rapid overhaul service for KUKA central hands is offered, with turnaround within 48-72 hours after delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Industrial robot repair and maintenance: - Is your industrial robot experiencing problems such as oil leaks, excessive gear backlash, crash damage, or significant wear? Our experienced repair and maintenance team is at your service! Our services at a glance: Cedpfsrwnphjx Aa Tepw Oil leak repair: - We identify and eliminate leaks, replace seals, and ensure reliable sealing. Reduction of gear backlash: - Through precise measurement and adjustment, we minimize gear backlash to ensure optimal performance. Crash damage repair: - After collisions, we perform a comprehensive analysis, replace damaged parts, and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi, and many more brands. Why choose our services: - Experienced robotics specialists - Quick diagnostics and repairs - Use of high-quality spare parts - Customer satisfaction as our top priority Our services include the refurbishment of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi, and more. We only sell on an exchange basis. The sale price already includes statutory VAT. Collection on site is possible only by appointment. Contact us today for a personal consultation and a quote. We specialize in getting your industrial robots back into top condition! If you require further information or are interested in a product, please contact the supplier directly and submit your inquiry to "vertrieb(at)robotic-refit.de".

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 240 kg, produsen pengendali: Kuka, model controller: KRC4, masa garansi: 12 bulan, PRICE ON REQUEST! Price on request: - The price for the offered products is not indicated directly and must be requested. Condition of the products: - The offered products are used, but have been completely overhauled, with all wear parts (O-rings, precision bearings, shaft seals, screws, retaining rings, Castrol oil) replaced. Measurements and testing: - Precise measurements were taken, especially in the areas of axes and gear backlash. An 8-hour load test was also performed. (Gear backlash: axis 4 – 0.01 / axis 5 – 0.01 / axis 6 – 0.01.) Delivery and packaging: - Products are delivered in a special box, and shipment is insured. Exchange for Wrist Unit: - It is possible to obtain the wrist unit on an exchange basis. Alternatively, purchase without exchange is available on request. Warranty: - Each wrist unit comes with a 12-month warranty. The warranty can be extended to 18 months for an additional fee. Stock: - The supplier has over 100 wrist units in stock; various models are available. Express Overhaul: - Express overhauls for KUKA wrist units are available and will be completed within 48–72 hours after delivery. Repair service: - In addition to available products, a repair service for ABB wrist joints is also offered. Industrial robot repair and maintenance: - Is your industrial robot experiencing issues such as oil leaks, excessive gear backlash, collision damage, or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Resolving oil leaks: - We identify and eliminate leaks, replace seals, and ensure reliable sealing. Reducing gear backlash: - Through precise measurement and adjustment, we minimize gear backlash to ensure optimal performance. Collision damage repair: - In the event of a collision, we perform a comprehensive analysis, replace damaged components, and restore full functionality. Reducing wear: - All worn components are carefully replaced to extend the service life of your robot. Cpederqgfkspfx Aa Tow Wrist joint repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi, and many others. Why choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the reconditioning of all wrist joints from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi, and more. Sales are strictly on an exchange basis. Sales price includes statutory VAT. On-site collection is only possible by prior appointment. Contact us today for individual advice and a quotation. We specialize in getting your industrial robots back into top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending your inquiry to "vertrieb(at)robotic-refit.de".

Kondisi: diremajakan ulang (bekas), PRICE ON REQUEST! KUKA Central Hand ZH 210/240 Foundry - used & tested completely overhauled, all wear parts replaced - fully calibrated - Gear backlash Codpfsgz Tciex Aa Tjpw Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.01 WM - Central hand newly adjusted - Endurance test: 8 hours at 100% load - Delivered in a special box (insured shipping) - Central hand in exchange (available without exchange on request) - Gearbox overhaul for axes 1-6 - 12 months warranty 18 months possible for an additional charge IMMEDIATE availability: more than 100 central hands in stock, various models. Just send us your inquiry! Express overhaul of your KUKA central hand also possible – within 48–72 hours of delivery. Additionally, we also offer repair of ABB wrists.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 210 kg, produsen pengendali: Kuka, model controller: KRC4, masa garansi: 12 bulan, PRICE ON REQUEST! Price upon request: - The price for the offered products is not listed directly and must be inquired individually. Product condition: - The listed products are used, but have been completely overhauled. All wear parts (O-rings, precision bearings, shaft seals, screws, retaining rings, Castrol oil) have been replaced. Measurements and testing: - Precise measurements have been carried out, particularly for axis and gearbox play. An 8-hour load test has also been conducted. (Gearbox play: Axis 4 - 0.01 / Axis 5 - 0.01 / Axis 6 - 0.01). Delivery and packaging: - Products are delivered in a special box, and shipping is insured. Central hand exchange: - It is possible to receive the central hand on an exchange basis. Alternatively, it can also be purchased without exchange upon request. Warranty: - Each central hand comes with a 12-month warranty. Optionally, the warranty may be extended to 18 months for an additional fee. Stock availability: - The supplier stocks more than 100 central hands, with various models available. Express overhaul: - Fast overhaul service for KUKA central hands, completed within 48-72 hours after receipt. Repair service: - In addition to the offered products, a repair service for ABB wrists is also available. Industrial robot repair and maintenance: - Does your industrial robot exhibit issues such as oil leaks, excessive gearbox play, crash damage, or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Fixing oil leaks: - We identify and eliminate leak points, replace seals, and ensure reliable sealing. Reducing gearbox play: - Through precise measurement and adjustment, we minimize gearbox play to guarantee optimal performance. Crash damage repair: - Following collisions, we perform comprehensive analysis, replace damaged components, and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend your robot’s service life. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi, and many more. Cjdpfxorqf Tks Aa Tspw Why choose our services: - Experienced team of robotics specialists - Quick diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the refurbishment of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi, and more. We only sell on an exchange basis in principle. Sales price already includes statutory VAT. On-site pickups are only possible by prior appointment. Contact us today for tailored consultation and a quote. We specialize in bringing your industrial robots back to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and submitting your inquiry to "vertrieb(at)robotic-refit.de".

Kondisi: diremajakan ulang (bekas), PRICE ON REQUEST! - Used & inspected Completely overhauled, all wear parts replaced - Fully measured - Gear backlash Axis 4 - 0.02 mm Axis 5 - 0.02 mm Axis 6 - 0.01 mm - Central hand newly adjusted - Endurance test: 8 hours at 100% load - Delivery in a special box (insured shipping) - Central hand on exchange basis (without exchange available on request) - Gearbox overhaul for axes 1-6 - 12 months warranty 18 months possible for an additional charge IMMEDIATE availability - over 100 central hands in stock, various models. Just ask! We also offer express overhauls of your KUKA central hand - turnaround 48–72 hours from delivery. Additionally, we offer ABB wrist repairs as well. Cpjdpfx Aasg A Iuyj Tsw

Kondisi: bekas, 5-station combined section steel shear PEDDINGHAUS type 210 AD/13 Machine No. 529A059 Year of manufacture: approx. 1970 Punching station: Punching force 60 tons Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet Ø 20 mm in 19 mm sheet Throat depth 365 mm Round bar shear: Cutting capacity round 42 mm Square 38 x 38 mm Flat bar shear: Cutting capacity at shear angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Section steel shear: Cutting capacity angle steel at 90° 110 x 10 mm Csdoi Duh Iepfx Aa Tspw Cutting capacity angle steel at 45° 90 x 9 mm T-section 110 x 10 mm Notching station: Rectangular notcher up to 12 mm sheet Punch size 85 x 50 mm Motor power 3 kW Power supply 380 Volt, 50 Hz - Center punch device via hand lever and centering device - Mechanical stroke release by hand lever - Flat bar shear equipped with 2° blade - Mechanical hold-down on the section steel shear, round bar shear, and flat bar shear Space requirements (L x W x H) 1500 x 800 x 1900 mm Weight 2000 kg Good condition

Kondisi: bekas, Hydraulic Hack Saw, Metal Saw, Reciprocating Saw KASTO Type PSB WBS 210 / 230 Cedpfxeifu Ayj Aa Tspw Mach. No. 115 106 1212 / 72783 Year of manufacture: 1986 Cutting capacity - Round: Ø 250 mm Cutting capacity - Square: 225 x 225 mm Cutting capacity - Rectangle: 260 x 100 mm Cutting speed: 11 - 13 - 17 - 22 - 26 - 34 m/min Saw blade length: 400 mm Motor power: 1.4 and 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - For 90° cuts only, no mitre adjustment - Saw motor with 2 speeds and 3 V-belt levels - Hydraulic feed for saw frame - Hydraulic cutting pressure adjustment via throttle valve - Rapid traverse for lowering the saw frame - Manually height-adjustable material support table with mm scale via handwheel - Manual material clamping - Coolant system integrated into machine base - Operating manual Space required L x W x H: 1500 x 700 x 1550 mm Weight: 590 kg In very good condition.

Kondisi: bekas, en-1 Cpsdpfx Aaeifu Arj Tjw

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 92805, Mesin planer dan profiling WEINIG Profimat 26 Super Lebar kerja 20 - 230 mm Cjdpfxeynl N Ss Aa Topw Tinggi kerja 8 - 120 mm 5 spindle kerja Ø 40 mm Meja masukan panjang (sekitar 2000 mm) Spindle bawah 5,5 kW / kiri + kanan 5,5 kW / atas 5,5 kW / finishing bawah 5,5 kW Kecepatan spindle 6000 rpm Tekanan pneumatik pada roller pengumpan Pengumpanan kardanik dengan kecepatan variabel 5 - 24 m/menit Pompa pelumas Tampilan digital mekanis Tahun pembuatan 2001 Dimensi 3400 x 1800 x 1900 mm (P x L x T), berat 2500 kg

Kondisi: baru, lebar meja: 730 mm, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 200 mm, - Ukuran meja: 730 × 210 mm - Jarak gerak (X/Y): 500 × 200 mm Cpjdpfx Aasyqwnro Tow

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1148877, Spesifikasi Ukuran meja: 1016 mm x 356 mm Pergerakan sumbu X: 508 mm Pergerakan sumbu Y: 406 mm Pergerakan sumbu Z: 356 mm Spindel: BT40 Kecepatan spindel: 0-10.000 rpm Motor spindel: 11,2 kW Kecepatan perpindahan cepat: 30,5 m/menit Kapasitas toolchanger: 20 alat Berat perkiraan: 2313 kg Mesin Dilengkapi Dengan: Kontrol CNC Haas Sistem pendingin aliran tinggi Penerangan Pelindung tertutup Cpodpfx Aox Afpgea Tew Manual

Kondisi: bekas, jarak tempuh: 146.530 km, daya: 338 kW (459,55 hp), pendaftaran pertama: 02/2024, jenis bahan bakar: diesel, berat kosong: 8.421 kg, berat muatan maksimum: 9.579 kg, berat keseluruhan: 18.000 kg, konfigurasi gandar: 4x2, jarak roda: 3.750 mm, inspeksi berikutnya (TÜV): 02/2027, warna: putih, kabin pengemudi: lain, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja-udara, Tahun pembuatan: 2024, Perlengkapan: ABS, kendali jelajah, kontrol traksi, kunci diferensial, pemanas parkir, pendingin udara, sistem navigasi,

Kondisi: bekas, jarak tempuh: 929.000 km, daya: 355 kW (482,67 hp), pendaftaran pertama: 07/2018, jenis bahan bakar: diesel, berat keseluruhan: 20.500 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 05/2026, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Perlengkapan: ABS, filter jelaga, pendingin udara,

Kondisi: bekas, jarak tempuh: 830.000 km, daya: 355 kW (482,67 hp), pendaftaran pertama: 06/2018, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 07/2026, rem: retarder, warna: merah, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP), sistem navigasi,