Beli Axa Dbz bekas (4)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 36.604 h, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 600 mm, berat keseluruhan: 9.500 kg, jumlah sumbu: 4, This 4-axis vertical machining center AXA DBZ was manufactured in 2010. It features an X-axis travel of 2 x 750 mm for pendulum machining, a Y-axis travel of 500 mm, and a Z-axis travel of 600 mm. The machine is equipped with an NC rotary table with hydraulic counter bearing and a plate-type tool changer. If you are looking for high-quality machining capabilities, consider the AXA DBZ vertical machining center we are offering for sale. Contact us for further details. • Spindle hours: 36,604 h (verified by image) • Machine operating hours: 81,189 h • Overall dimensions: 4500 × 2250 × 2700 mm • Voltage: 400 V • Frequency: 50 Hz Fgsdoy Edv Hopfx Alyof • Total power requirement: 45 kVA • Full load current: 65 A • External protection: 80 A • Tool changer: plate-type tool changer • Design/configuration: moving column; work areas left/right (pendulum machining) • Safety/enclosure: maintenance door Additional equipment • NC rotary table RTA 200 with hydraulic counter bearing (4th axis) • Clamping system: hydraulics for workspaces left/right, including rotary feedthrough for 4th axis • Internal coolant supply (IKZ) • Chip conveyor • Emulsion system (coolant) • Recooling unit (chiller)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 65.155 h, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 600 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, lebar meja: 500 mm, panjang meja: 1.350 mm, beban meja: 550 kg, berat keseluruhan: 10.000 kg, kecepatan spindel (maks.): 10.000 rpm, jumlah slot dalam magazin alat: 22, jumlah sumbu: 4, This vertical 4-axis double machining centre AXA DBZ was manufactured in 2007. It features an impressive X-axis travel of 2 x 750 mm, a Y-axis travel of 500 mm, and a Z-axis travel of 600 mm. The machine is equipped with a main spindle speed range of 30–10,000 rpm and a maximum table load capacity of approximately 550 kg. If you are looking for high-quality machining capabilities, you should consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. Double machining centre with 2x 4th axis RTA 1-180 Automatic doors (compatible with robotic handling systems) Main spindle speed range 30–10,000 rpm Main spindle drive power approx. 30 kW (40% duty cycle) Max. torque approx. 143 Nm Tool holder SK 40 DIN 69871 / A Internal coolant supply (water – air) Table clamping area 2 x 1,350 x 500 mm Max. table load approx. 550 kg Number of T-slots 3 T-slot width 14H9 mm T-slot spacing 160 mm 4th axis 2 x RTA 1-180 Number of tool positions 22 Tool diameter 85 mm Max. tool diameter with adjacent empty slot 135 mm Max. tool length 400 mm Tool change time 4.0 sec Rapid traverse X/Y 25 m/min Rapid traverse Z 20 m/min Feed force 9 kN Total power requirement 55 kVA Machine weight approx. 10.0 t Operating hours: 65,155 h Fgodpfx Aley Sg I Eeyjf Technical Specification Through-spindle coolant: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 600 mm, model controller: Heidenhain iTC530, kecepatan rotasi (maks.): 12.000 rpm, RINCIAN TEKNIS Jarak sumbu X: 2 x 750 mm Jarak sumbu Y: 500 mm Jarak sumbu Z: 600 mm Kecepatan rapid X / Y: 25 m/menit Kecepatan rapid Z: 20 m/menit Gaya umpan: 9 kN Fsdpfxjymz D Ns Alysgf Rentang kecepatan putar: 30–12.000 rpm Penukar alat: 22 posisi Tipe dudukan alat: SK40 Panjang alat maks.: 400 mm Diameter alat maks.: 85 mm (135 mm dengan stasiun tetangga kosong) Waktu pergantian alat: 4,0 s Luas permukaan penjepitan meja: 2 x 1.350 mm x 500 mm Beban maksimal per meja: 550 kg DETAIL MESIN Model kontrol: Heidenhain iTC530 Daya penggerak: 30/20 kW Kebutuhan daya total: 55 kVA Dimensi & Berat Dimensi (P x L x T): 6,0 x 3,5 x 3,5 m Berat mesin: 10.000 kg PERLENGKAPAN Pendinginan internal Sistem pendingin dengan filter pita kertas Dokumentasi

Tahun pembuatan: 2012, Kondisi: siap digunakan (bekas), Travel X/Y/Z: 2x 800mm/600mm/600mm, Spindle speed: 4,000 rpm, Table to spindle nose distance: 180mm–780mm, Max. tool diameter/length: 85mm/135mm, Rapid traverse X/Y/Z: 25m/25m/20m/min, Feed force: 9,000N, Ground clamping surface: 2x 1000mm/500mm. Dimensions X/Y/Z: approx. 6,600mm/3,000mm/3,200mm, Weight: approx. 18,000kg. Documentation available. Fgedpfx Aljtyymceyjf