Beli Bagaimana Menghubungi Dengan Mesin bekas (77.889)

Kondisi: bekas, Tahun pembuatan: 2006, tr-001 Duodpfxozkvvyj Ac Tow

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Swing diameter over bed 32 mm Spindle bore 32 mm Turning length 125 mm Control system YASKAWA SIEMENS 840 DI V2 Dujdpfx Asxq Hk Uec Tsw Spindle speeds 7,000 rpm Max. workpiece length 150 mm Clamping diameter 32 mm Feed rate 0 - 2,000 mm/min Machine weight approx. 5.7 t Space requirements approx. 10.5 x 2 x 1.9 m The sliding headstock automatic lathe is in good condition, ready for immediate use, and is supplied with tool holders and spare parts. >> Two identical STAR 32T sliding headstock automatic lathes are available.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Max. swing over bed: 32 mm Bar capacity: 32 mm Turning length: 125 mm Control unit: YASKAWA SIEMENS 840 DI V2 Clamping diameter: 32 mm Spindle speeds: 7,000 rpm Maximum workpiece length: 150 mm Feed rate: 0 - 2,000 mm/min Machine weight: approx. 5.7 t Space requirement: approx. 10.5 x 2 x 1.9 m The sliding headstock automatic lathe is in good condition, fully operational, and comes complete with tool holders and spare parts. Dsdpfovwgmyex Ac Touw >> Two identical STAR 32T sliding headstock automatic lathes are available.

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, DENVER QUOTA V – Tahun 2006 Pusat Pemesinan CNC 3 Sumbu Dimensi Maksimum 1550 x 3200 mm Daya 2,5 HP Djdpszkva Eofx Ac Touw Berat 3900 Kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Working width 1300 mm Workpiece height – max. 3 – 140 mm Control system Xinje XD5 Part length – min./max. 200 – mm Total connected load 13.4 kW Machine weight approx. 4.5 t Djdpfoylp A Dsx Ac Teuw Space requirements approx. 5.1 x 2 x 2.3 m This brush sanding machine is in very good condition, immediately available, and can be inspected under power at the seller’s location. DESCRIPTION: - Minimum part length: 200 mm - The machine is designed for sanding flat individual components such as kitchen cabinets, windows, doors, furniture, etc. - Modular control system for the module units to meet customer requirements. - Frequency converter for speed control of the motors on each module unit. - Each unit can be easily pulled out for maintenance and for changing sanding paper and brushes. - Automatically adjustable working height (3–140 mm) via the control system - Oscillating compressed air at the end section Additional information: - Ball bearings, drive belts, and chains for the brush drives were replaced in June 2025

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, X-axis travel 14,000 mm y-axis travel 5,000 mm Djdpjvwgm Hsfx Ac Touw z-axis travel 1,500 mm w-axis 3,000 mm Distance between columns 4,000 mm Portal column: Distance table to spindle nose 4,500 mm Workpiece weight 100 t Table dimensions - longitudinal 9,000 mm Table dimensions - transverse 3,000 mm Spindle taper ISO SK 50 Spindle speeds 2-2,500 rpm Spindle drive 113 kW Spindle diameter 200 mm Spindle torque 9,500 Nm Feed range x-axis 1-10,000 mm/min Feed range y-axis 1-10,000 mm/min Feed range z-axis 1-10,000 mm/min Rapid traverse 20,000 mm/min Height above floor 8,600 mm Control SIEMENS 840C Machine weight approx. 360 t >>>retrofit 2011

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control: SIEMENS 840 D w-axis 1500 mm Column clearance: 2500 mm Clamping surface: 3000 x 2000 mm Workpiece weight capacity: 10,000 kg Spindle speeds: 5-6,000 rpm Gear stages: 2 Drive power - milling spindle: 45 kW Distance spindle to clamping spindle: 3500 mm Spindle torque: 1,250 Nm Tool changer capacity: 200 positions Dusdpfxovwgmme Ac Tow Tool diameter: 135 / 250 mm Max. tool weight: 50 kg Max. tool length: 400 mm Tool holder: ISO SK-50 The portal milling machine is in very good condition. ADDITIONAL EQUIPMENT FOR DRILLING/MILLING Angle milling head yes Automatic tool clamping yes Ball screw drives yes Guideway covers yes Coolant system yes High pressure cooling system (internal coolant supply) yes Fully enclosed work area yes Portal machining center with tool changing system and second table plate.

Kondisi: baik (bekas), Tahun pembuatan: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm Control SIEMENS 840D Table load capacity 12 t Height above floor level 6300 mm Table dimensions - longitudinal 5000 mm Table dimensions - crosswise 2500 mm Number of tables 2 Tool changer 200 positions Max. tool weight 30 kg Tool holder HSK A 100 Max. tool diameter 250 mm Max. tool length 500 mm Spindle speeds 5-6000 rpm C-axis -10 to 370° B-axis 5 to -95° Column clearance 3000 mm Distance spindle nose to table 1500 mm Machine weight approx. 161 t Space requirement approx. 20.5 x 11 x 6.3 m Dodpfx Ajvwglvjc Tsuw This WALDRICH-COBURG Valutec portal milling machine is in a very, very good condition and can be inspected by appointment with the seller.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Nomor Referensi: 10365 Produsen: MONFORTS Tipe: KNC 8 S - 3000 Tahun Pembuatan: 1999 Jenis Kontrol: Kontrol CNC Kontrol: MTC K Lokasi Penyimpanan: Halberstadt Negara Asal: Jerman Nomor Mesin: 178.05 Langkah X: 455 mm Langkah Z: 2850 mm Diameter Chuck: 315/400/500 mm Jarak Antar Pusat: 3000 mm Gaya Umpan - Z: 23,9 kN Gaya Umpan - X: 11,3 kN Kecepatan Cepat Sumbu X: 6,8 m/menit Kecepatan Cepat Sumbu Z: 4 m/menit Diameter Putar di atas Peluncur Radial: 540 mm Diameter Putar Maksimum: 830 mm Rentang Pergerakan Peluncur Datar: 450 mm Kepala Spindel, Diameter Maksimum untuk Material yang Digulung: 88 mm Kepala Spindel, Diameter Maksimum untuk Material yang Tidak Diproses: 90 mm Sentrum, Diameter Luar Pinola: 125 mm Sentrum, Langkah Pinola Maksimum: 200 mm Sentrum, Kerucut Dalam: Tipe MK6 Tangki Hidraulik: 15 l Tangki Pendingin: 220 l Tangki Pendingin pada Konveyor Serpihan: 160 l Dujdezkpu Aepfx Ac Tsw Panjang Mesin: 5200 mm Lebar Mesin: 2110 mm Tinggi Mesin: 1995 mm Berat Mesin Kira-kira: 6,850 (Tanpa Konveyor Serpihan dan Tangki Pendingin) ton Kotak Spindel Kepala Spindel: DIN 55027 - 11x290 Informasi Tambahan: Tangki Oli Pelumas Tambahan, kira-kira 6 liter Termasuk Aksesori Mesin dalam kondisi berfungsi dan dapat diperiksa setelah perjanjian sebelumnya.

Kondisi: bekas, nomor mesin/kendaraan: 008412, de-01 Dusdeyilxmjpfx Ac Tjw

Kondisi: bekas, nomor mesin/kendaraan: 008470, Area kerja sumbu X: 4300 mm Area kerja sumbu Y: 2205 mm Bidang kerja: Meja nesting Daya spindle utama: 11 kW Duodsyzyrvjpfx Ac Tsw Jumlah sumbu yang dikontrol: 5 sumbu Jumlah spindle bor: 46 Jumlah posisi alat: 22

Kondisi: bekas, nomor mesin/kendaraan: 008431, arbeitsbereich_achse_6360 Dusdpeym Rphofx Ac Tjw

Kondisi: bekas, nomor mesin/kendaraan: 008439, arbeitsbereich_20240629 Dedpfx Aceyngzcj Tjuw

Kondisi: bekas, nomor mesin/kendaraan: 008363, Jenis tepi terpasang: tepi tipis, tepi tebal, kayu solid Sistem lem: EVA Perekat sambungan: ya Dusdpfox Swddex Ac Tew Agregat multifungsi: ya Kecepatan maju maks.: 18 m/menit Ketebalan papan maks.: 60 mm Unit kerja: 7 unit

Kondisi: bekas, nomor mesin/kendaraan: 008471, de006a6b Dsdpfx Asywaf Ujc Tjuw

Kondisi: bekas, nomor mesin/kendaraan: 008473, arbeitsbereich-achse-x-4900-mm-arbeitsbereich-achse-y-1680-mm-ar beitsebene-mit-vakuum-konsolenauflagen-leistung-haupt-spindel-12- kw-anz-kontrollierte-achsen-5-achsen-anzahl-bohrspindeln-10-anzah l-werkzeugplatze-36 Dedpeywaf Ijfx Ac Tsuw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 1.000 mm, rentang pengukuran sumbu Y: 3.000 mm, rentang pengukuran sumbu Z: 800 mm, Rentang Pengukuran Sumbu X 1.000 mm Sumbu Y 2.000 mm Sumbu Z 800 mm Panduan Granit Sumbu yang Dilumasi dengan Udara Akurasi Pengukuran Penyimpangan pengukuran panjang sekitar 1,3 µm ditambah L 400 tergantung pada model dan kondisi kalibrasi Sistem Probe Probe Renishaw tersedia Pemicu Sentuh dan Pemindaian PH10 TP20 SP25 SP80 tergantung pada konfigurasi Berat Benda Kerja Beban meja yang diizinkan hingga sekitar 2.000 kg tergantung pada model Pengendali Pengendali CNC dengan perangkat kendali manual Perangkat Lunak Metrosoft CM Versi 3.112 WENZEL Quartis R16 Pasokan Listrik 230 V 50-60 Hz Djdpfx Acoy Ewgxj Tsuw Konsumsi daya sekitar 1 kVA Pasokan Pneumatik Udara bertekanan 6 hingga 10 bar difilter dan kering

Kondisi: bekas, Tahun pembuatan: 2018, Diameter putaran 45 mm Panjang putaran 50 mm Pengendali Mitsubishi FCA70LPC-V Kecepatan putaran spindel 8.000 putaran/menit Jarak pergerakan - sumbu x 180 mm Jarak pergerakan - sumbu z 200 mm Kecepatan cepat pada sumbu X dan Z 20 / 30 m/menit Dsdpfxezkvxbo Ac Teuw Berat mesin sekitar 1.600 kg Ruang yang dibutuhkan sekitar 1700x700x1700 mm

Kondisi: bekas, Tahun pembuatan: 2017, Diameter putaran 40 mm Panjang putaran 50 mm Pengendali Fanuc 0i-TD Kecepatan spindel 8000 putaran/menit Jarak gerakan - sumbu x 180 mm Jarak gerakan - sumbu z 200 mm Kecepatan cepat pada sumbu X dan Z 15 m/menit Dujdpezkvw Rsfx Ac Tow Berat mesin sekitar 1500 kg Ukuran ruang yang dibutuhkan sekitar 1500x700x1600 mm

Kondisi: bekas, Tahun pembuatan: 2003, Diameter ayun 176 mm Panjang ayun 570 mm Diameter putaran 510 mm Diameter pemesinan 420 mm Jarak perjalanan - sumbu z 570 mm Jarak perjalanan - sumbu x 245 mm Diameter lubang spindel 43 mm Duodpfx Aozkvw Djc Tsw Diameter senter 85 mm Langkah senter 120 mm Kecepatan putar spindel 60-6.000 RPM Kecepatan cepat pada sumbu X dan Z 24 m/menit Pengontrol MSG-805 V Total kebutuhan daya 5,5 kW Berat mesin sekitar 3.400 kg Kebutuhan ruang sekitar 2000x1700x1800 mm

Tahun pembuatan: 1987, Kondisi: bekas, x-travel 2800 mm y-travel 800 mm z-travel 1300 mm Machine weight approx. 3 t STIEFELMAYER Manually Operated 3D Measuring and Marking Machine Type: System C-100 Year of manufacture: 1987 Measuring stand No. 314 710 87 Working area: X-axis (horizontal) approx. 2,800 mm Y-axis (crosswise) approx. 800 mm Z-axis (vertical) approx. 1,300 mm Table size: 3,500 x 1,000 x 360 mm Working height above floor: 750 mm Mounted rotary table, rotatable: 800 mm Cross sections of measuring carriage: 100 x 100 mm or 60 x 60 mm Table height above floor: 700 mm Table thickness approx.: 360 mm Overall height of the measuring machine: approx. 2,800 mm Weight approx.: 3,000 kg Special features / Accessories: • Side-mounted measuring carriage system C with cross-section 100 x 100 mm or 60 x 60 mm for Y-axis measuring arm • Mounted rotary table with vernier scale 0 – 360°, easily removable • Mounted MZ 2000 measuring counter as digital display with network connection and RS232 interface • 2 longitudinal rulers as workpiece stops, approx. 2,400 mm long • 6 height-adjustable leveling feet • Swiveling storage tray, extensive marking accessories • RENISHAW measuring probe Dujdpfxjt Hw I No Ac Tow Condition: Good – available immediately, connected to power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Additionally, we have other measuring machines and plates in various sizes in stock. Please contact us for further information.

Kondisi: bekas, Tahun pembuatan: 1981, X-travel: 650 mm Y-travel: 450 mm Workpiece height: 585 mm Control: ADCOS CNC 400 Total power requirement: 15 kW Machine weight: approx. 5,000 kg Space requirement: approx. m HAUSER (Switzerland) CNC Double-Column Jig Grinding Machine Type S 40 – CNC 311 / ADCOS 400 CNC Year of construction: 1981 / modernized in 2008 # 0125 _____ Table size approx. 630 x 770 mm Max. table load approx. 500 kg Dusdpfx Acst Hw S Uo Tew Max. longitudinal table travel (X): 650 mm Max. cross movement grinding head slide (Y): 450 mm Max. vertical adjustment of crossbeam (W): 500 mm Max. grinding spindle stroke (Z): 140 mm Grinding head stroke rate (4 Hz): 0.5 - 12 m/min Vertical clearance between table/grinding spindle: 0-585 mm Clearance between columns: 750 mm Max. taper grinding: 16° Approx. grinding diameter for bores: 230 / 360 mm 18 spindle speeds depending on spindle motor, continuously variable: 4,500 – 80,000 rpm Fine feeds in X and Y axes and W axis: 0.5-1,500 / 3,000 / 800 mm/min Planetary angular speed (C-axis): 5-250 rpm Total drive approx. 15 kW - 400 V - 50 Hz Machine weight approx. 5,000 kg Equipment / Special features: • CNC path control replaced in 2007 with an ADCOS CNC control, type CNC 400, with large display and direct programming at the control, with electronic handwheel for fine adjustment of axes, X = longitudinal table, Y = spindle head transverse, Z = quill vertical/stroke, C = rotary axis spindle/quill, U = infeed automatic, W = crossbeam vertical adjustment • Z-axis as rapid traverse for shorter machining times, plunge grinding, face grinding, pre-selection of reversing points (approach + teach-in), and infinitely variable stroke speed, essentially functioning as a third positioning axis • U-axis as manual and controlled infeed axis (radial) at grinding head, with electronic display of infeed dimension • 1 grinding motor mounted with spindle speed of approx. 30,000 rpm • Mounted acoustic grinding contact indicator device KSV 5 • Separately standing coolant system with band filter, control and switch cabinet standing separately, separate hydraulics, central lubrication, dust extraction, and much more Condition: Very good / demonstration ready under power Delivery: Ex stock here - as inspected Payment: Net - upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1987, Translation of technical machinery sales description: x-axis travel 400 mm y-axis travel 250 mm Workpiece height 485 mm Control ELESTA CNC 314 Total power requirement 10 kW Machine weight approx. 4000 kg Space required approx. m H A U S E R (Switzerland) CNC-controlled coordinate grinding machine Model S 3 – CNC 314 Year of manufacture 1987 / partially overhauled in 1998 # S 3 - 0463 _____ Table size approx. 600 x 380 mm Table load capacity approx. 300 kg Longitudinal table travel max. (X) 400 mm Cross table travel max. (Y) 250 mm Vertical adjustment of grinding carriage max. (W) 450 mm Grinding spindle stroke max. (Z) 120 mm Grinding head stroke, hydraulic 15 - 7,500 mm/min Mounting height table/grinding spindle min./max. -75 / +485 mm Grinding spindle overhang 350 mm Taper grinding max. 16° Grinding diameter, borehole max. approx. 230 mm 18 spindle speeds, depending on spindle motor, continuously variable 4,500-80,000 rpm Planetary rotation speed (C), continuously variable 5-250 rpm Djdpfjt Hw Txox Ac Tjuw U-axis, radial feed 6 mm Total drive approx. 10 kW – 380 V – 50 Hz Machine weight approx. 4,000 kg Accessories / Special equipment: • CNC path control Type CNC 314 (ELESTA-POSELESTA II) with monitor, for 4 axes (=X, Y, C + U-axis), with interpolation in 2.5 dimensions (X, Y, C). The U-axis is a feed axis and not capable of interpolation. Teach-in programming directly on the machine, with various sub-programs, as well as manual axis movements from the control panel or with an electronic handwheel. Separate digital display for the Z-axis • U-axis as manual and controlled radial feed axis, on the grinding head, with digital display of feed rate, • 2 grinding motors #5674 and #3980 for spindle speeds up to 80,000 rpm, • Built-in acoustic grinding contact indicator KSV 5 • HI-Cut system (oil cooling) and automatic fire protection system • Separate coolant unit with band filter, separate hydraulics and control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories available at present. Condition: good to very good / shortly ready for demonstration under power Delivery: ex stock here – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1986, de-en Duodpfx Ast H Smtoc Tew

Kondisi: bekas, Tahun pembuatan: 1970, Radial drilling capacity in steel (diameter): 32 mm Arm reach: 1000 mm Maximum workpiece height: 1400 mm Total power requirement: 6 kW Machine weight: approx. 3,700 kg Space requirement: approx. [missing value] WEBO Radial drilling machine Model: BR 32 V Year of manufacture: approx. 1970 Serial no. _____ Drilling capacity in cast iron/steel (solid): max. 40 / 32 mm Boring (with 50% pre-drilling): 60 / 80 mm Arm reach: approx. 1,000 mm Spindle taper: MT 4 Quill stroke: 350 mm Spindle speeds, 3 ranges/stepless: 60 - 1,850 rpm Base plate: 1,200 x 930 mm Installation height under the spindle: 200 - 1,400 mm Swivel radius: 360° Vertical adjustment of arm: 980 mm Horizontal movement of drilling saddle: 1,640 mm 9 feed rates: 0.06 – 1.0 mm/revolution Spindle drive: approx. 3 / 4 kW Total drive: 6 kW - 380 V – 50 Hz Weight: approx. 3.7 t Accessories / special equipment: • Manual mechanical clamping of arm and spindle box via hand lever • Automatic feed with depth stop via vernier • Stepless speed control within three gearbox ranges and two motor speeds, adjustable via hand lever • Right and left hand rotation Dujdpst H Smysfx Ac Tjw • Electro-motorized vertical adjustment of the arm via cross switch • Ammeter for drilling motor • Coolant system with integrated coolant pump • Fixed drilling table, approx. 800 x 600 x 600 mm (height), vice, etc. Ideal machine for steel construction, toolmaking, and mechanical engineering! Condition: Older but good to very good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice