Beli Benih Bor bekas (3.880)

Kondisi: baru, de_en_001 Hfsdpfjyrht Iox Ag Rsd

Kondisi: baru, Condition: new Delivery time: approximately 2–4 weeks from order Country of origin: Poland Price: €2,595 Drilling capacity in steel: 12 mm Tool holder: 19 mm Weldon Motor power: 0.4 kW Length: 361 mm Width: 238 mm Height: 352 mm Weight: 14.5 kg Maximum drilling capacity: 12 mm Maximum annular cutter capacity: 36 mm Maximum cutting depth: 50 mm Stroke: 70 mm Motor speed: 260 rpm Minimum workpiece thickness: 6 mm This special battery-powered magnetic drill with a permanent magnet base is designed for use in remote areas where no power supply is available. The base contains very strong neodymium magnets and does not require electricity to operate. The PRO-36 PM Battery is equipped with an LED monitoring system that provides green and red signals to indicate the drill's current status and issue safety warnings. The drill can be used on convex (minimum diameter: 80 mm) and concave (minimum diameter: 1,000 mm) materials. Up to 47 holes with a diameter of 20 mm can be drilled in 10 mm steel plates when the PRO-36 PM Battery is equipped with the CAS LiHD 10.0 Ah battery pack. Features and advantages: • LED monitoring system flashes green when insufficient adhesion is detected, e.g., due to a gap or thin workpieces • Dual guide system ensures exceptional precision and maintenance-free operation • Overload protection • Tilt sensor stops the motor if the machine detaches unexpectedly • Control panel features so-called vandal-proof illuminated start/stop switches for the motor Hfedpfx Aeyrhtnjg Rjd Standard delivery package: • Cordless magnetic drill with cooling system • Plastic carry case • 4.0 Ah battery • Handle (3 pieces) • Safety belt • 4 mm Allen key with handle • Operating manual OPTIONS (prices on request): Charger Pressure cooling system Vacuum pad Vacuum pump Compressed air ejector

Kondisi: baru, Condition: new Delivery time: approx. 2-4 weeks from order Country of origin: Poland Price: €1,995 Drilling capacity in structural steel: 25 mm Tool holder: 19 mm Weldon Motor power: 1.6 kW Thread cutting capacity: M20 Length: 266 mm Width: 259 mm Height: 505 mm Weight: 18 kg Max. drilling capacity: 25 mm Max. annular cutter capacity: 70 mm Max. cutting depth: 75 mm Stroke: 190 mm Motor speed: 120-190 / 290-450 rpm Min. workpiece thickness: 8 mm The PRO-72T drilling machine is suitable for drilling and thread cutting. The powerful motor with variable speed enables milling up to 70 mm (2-3/4") and drilling up to 25 mm (1"). Thanks to clockwise and counterclockwise rotation, the machine can cut threads up to M20 using Promotech’s new thread cutting system. The two-speed gearbox with stepless speed adjustment allows optimal speed settings based on diameter, steel quality, or tool type. The intelligent speed control system keeps the motor speed constant regardless of load. The innovative 360° LED display simplifies machine operation and enhances safety at work. Features and advantages: • Powerful motor with robust 2-speed gearbox • Electronic Speed Stabilization System (ESSS) for consistent speed regardless of load fluctuations • Thread cutting in through and blind holes • Milling with carbide or HSS cutters as well as drilling • Electronic clutch • Overload and overheating protection • Robust design for extended tool life • Inclination sensor stops the motor if the machine tilts • 360° visualization displays the current operating status of the drill and provides safety and diagnostic information, e.g., for worn carbon brushes • Innovative, lightweight smart magnet • Magnetic Field Shape Control (MFSC) for maximum holding force on thin materials • Energy Saving Base (ESB) uses only 50% of its power in idle mode • Semi-automatic spline adjustment for easy, fast, precise, and repeatable gib setting without specialist knowledge • Intuitive control panel on top of the drill • Large coolant tank Standard scope of delivery: • Drilling machine • Plastic case • Handles (3 pcs.) • MK3 arbor with 19 mm (3/4") weldon holder • Safety strap • Cooling system • Protective spring for coolant hose • MT2 drift • 5 mm T-handle allen key • 4 mm allen key • 2.5 mm allen key • 8 mm combination wrench • Operating instructions OPTIONS (PRICES ON REQUEST): Hfjdpfx Agjyrhrwj Rsd Pressure cooling system Pipe mounting

Kondisi: baru, en-001 Hfedpjyrhqtsfx Ag Rsd

Kondisi: baru, en-GB Hedpoyrhqmsfx Ag Rsfd

Kondisi: baru, en-GB: Condition: new Delivery time: approx. 2 – 4 weeks from order Country of origin: Poland Price: €995 Drilling capacity in structural steel: 23 mm Arbor: 19 mm Weldon Motor power: 1.15 kW Length: 331 mm Width: 254 mm Height: 456 mm Weight: 15.5 kg Max. drilling capacity: 23 mm Max. core drill capacity: 50 mm Max. cutting depth: 50 mm Stroke: 160 mm Motor speed: 240 / 480 rpm Min. workpiece thickness: 6 mm The PRO-50, equipped with a specially developed motor and 2-speed gearbox (240/480 rpm), is optimised to achieve the correct speed for working with HSS cutters up to Ø 45 mm and twist drills up to Ø 23 mm. The rigid construction, optimised using FEA (Finite Element Analysis) software, increases tool life and allows a cutting depth of up to 75 mm. Its compact design and innovative lightweight intelligent magnet make this machine a true lightweight. The PRO-50 delivers maximum holding force on thin materials thanks to magnetic field shape control (MFSC). Both the drill and operator are protected from working on materials that are too thin by the Magnetic Power Adhesion Control (MPAC) module. In addition, the PRO-50 is equipped with an Energy Saving Base (ESB), which uses just 50% of its power consumption when the motor is not running. Features and Benefits: • Compact design with excellent power-to-weight ratio • Specially developed motor • Motor speeds 240 / 480 rpm (under load) • Spindle fitted with MT2 • Innovative lightweight intelligent magnet • Rigid construction extends tool life • Large stroke allows use of long tools • Motor cable with additional protective cover • Magnetic Field Shape Control (MFSC) delivers maximum holding force on thin materials • Magnetic Power Adhesion Control (MPAC) monitors the adhesion force of the electromagnetic base and protects both operator and machine from working on materials that are too thin • Energy Saving Base (ESB) uses just 50% power when the motor is not running Standard delivery set: • Drilling machine • Plastic case • Handle (3 pcs) • MT2 arbor with 19 mm (3/4”) Weldon holder • Safety belt Hfodpfx Agsyrhp Ne Red • Cooling system • Protective spring for coolant hose • MT2 drift • 2.5 mm Allen key • 5 mm Allen key • 5 mm Allen key with handle • 8 mm open-ended spanner • Operating manual OPTIONS (PRICES ON REQUEST): Pipe mounting Pressure cooling system Vacuum pad Vacuum pump Pneumatic ejector

Kondisi: baru, en-GB Hfodpfx Asyrhp Aog Rjd

Kondisi: baru, translation-01 Hedpfx Ageyrhppe Rofd

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2025, jumlah sumbu: 3, Penggerak Utama Jumlah sumbu: 3 Hjdjx D Dnkepfx Ag Rsfd CNC QUICK KQ-63E 3-sumbu ini diproduksi pada tahun 2025. Mesin bor multi-spindle ini mampu menangani benda kerja dengan panjang antara 70 hingga 2800 mm dan lebar 50 hingga 1220 mm. Fitur utamanya meliputi spindle milling atas dan bawah, penukar alat berkecepatan tinggi, serta motor servo brushless. Jika Anda mencari kemampuan pengeboran berkualitas tinggi, pertimbangkan mesin QUICK CNC KQ-63E yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pemboran & Pengeboran (Kayu)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2025, Mesin bor multi-spindle QUICK CNC KQ-62 Lite ini diproduksi pada tahun 2025. Dapat menangani benda kerja dengan panjang 70 hingga 2400 mm, ketebalan 9 hingga 60 mm, dan lebar 30 hingga 1220 mm. Fitur termasuk sistem kontrol Higerman, dua spindle milling 3,5 kW pada 18.000 rpm, serta unit pengeboran yang lengkap. Pertimbangkan kesempatan untuk membeli mesin bor multi-spindle QUICK CNC KQ-62 Lite ini. Hubungi kami untuk informasi lebih lanjut. Hfjdpfx Asx S Sizog Rjd Jenis Aplikasi Boring & Drilling (Kayu)

Kondisi: bekas, Tahun pembuatan: 2005, x-Achse 4000 mm y-Achse 2500 mm z-Achse 1600 mm w-Achse 800 mm Steuerung Heidenhain iTNC 530 Tischgröße 1800 x 2200 mm Tischbelastung 20 t Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden. Zubehör, abgebildete Werkzeuge und Spannmittel gehören nur zum Lieferumfang wenn dies in den Zusatzinformationen vermerkt ist. Hsdpfx Agjyrt Azj Refd Aenderungen und Irrtuemer in den technischen Daten und Angaben sowie Zwischenverkauf vorbehalten!

Kondisi: bekas, Tahun pembuatan: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping, drilling, and releasing; electric intermittent operation - Automatic retraction of the drilling unit after reaching the set drilling depth - Automatic extension of the drilling hole depth for end-grain drilling saves re-adjustment of the drilling depth when switching from flat-surface to end-grain drilling. (+10 mm, e.g., with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end side 24 mm) - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm) including 21 quick-change chucks (System Ganner) for easy drill bit changes - Easy swivel of the drilling unit from 0° to 90°, assisted by gas cylinder - 1 clamping beam, movable along Y-axis, with 3 pneumatic clamping cylinders for workpiece height up to max. 80 mm - Ideal stop system comprising: - 1 stop rail 1800 mm for shelf drilling (aluminium profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily switchable from right to left stop side for mirrored shelf drilling in carcass construction, also suitable for series drilling in System 32 - Side stops and position settings, as well as drilling height setting over support table via mechanical digital counters Hsdpfx Aeyrqubog Rsfd - Side stops can be easily swung away for the shortest possible changeover between carcass, frame, and line boring - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm - Ideal three-stage... (weight: approx. 400 kg gross, approx. 350 kg net) Dimensions: (L x W x H) 1.35 m x 1.25 m x 1.40 m Equipment: - 1 dust extraction funnel, dust-tested, ø 120 mm - 1 set for series drilling in System 32, complete with: - 1 base rail 1050 mm (aluminium profile 40x40 mm) - 1 setting gauge for series drilling - 1 frame dowel device, complete with: - 1 central stop - 1 round stop bar, 850 mm long - 2 stops Location: Nattheim

Kondisi: bekas, ALZMETALL AB 4 SV Column Drilling Machine Machine no. 14805 Year of manufacture: approx. 1980 Drilling capacity: 40 mm Spindle taper: MK 4 - quick quill Throat depth: 340 mm Quill stroke: 180 mm Table size: 710 x 560 mm Column diameter: 160 mm Spindle speed: 30 - 765 rpm, infinitely variable Motor power: 2.3 and 3.4 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Spindle speed adjustable via 2 motor speeds and stepless variator gearbox - Back gear with 2 transmission stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed rates: 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece mounting surface - LED lighting unit Space requirement (L x W x H): 1200 x 725 x 2050 mm Weight: 615 kg In good condition Hfedpfxjn N Ekcj Ag Rjd

Kondisi: bekas, Mesin Frais Alat Universal DECKEL Tipe FP 1 No. Mesin 51265 Tahun Pembuatan sekitar 1967 Perjalanan sumbu X: 300 mm Y: 150 mm Z: 340 mm Ukuran meja 600 x 200 mm Taper spindle SK 40 - S20 x 2 Kecepatan spindle 40-2000 rpm, 16 tingkat Daya motor 1,0 dan 1,6 kW, bisa pengalih kutub Koneksi listrik 380 Volt, 50 Hz - Feeding pada sumbu X dan Z - Kecepatan spindle melalui 2 kecepatan motor dan 8 tingkat transmisi Hfjdpfeghtvajx Ag Red - Gerakan pinol pada kepala frais vertikal 60 mm - Meja sudut dapat diputar, diputar-putar, dan dimiringkan - Pompa pendingin di kaki mesin - Lemari kontrol terpisah Dimensi ruang yang dibutuhkan P x L x T 1100 x 1100 x 1600 mm Berat 690 kg dalam kondisi baik

Kondisi: bekas, CNC travelling column drilling and milling machine ANAYAK Type HVM-3800-P Bed-type milling machine, design similar to a floor plate boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 "Refurbished 2025" The machine will be overhauled in 2025 and can then be inspected in stock at 37235 Hessisch Lichtenau. Travel distances: X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size: 3800 x 1200 mm T-slots: 8 slots, 22 mm, spacing 130 mm Table load: max. 25 tons (fixed table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar DIN 69872-B) Spindle speed: 60–4000 rpm, infinitely variable Feed speed: up to 10,000 mm/min, infinitely variable Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Power connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine Hjdexcgtgopfx Ag Rofd - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal head, fully automatic swiveling in two 45° axes – B+C axis - HEIDENHAIN iTNC 530 control with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF spindle 18,000 rpm – for mounting - Free-standing control cabinet - Chip conveyor mounted between the travelling column bed and the machine table - 32,078 operating hours read - Coolant system - Free-standing hydraulic unit - Operating manual with wiring diagrams Footprint: L x W approx. 1000 x 700 cm Machine height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Lebar kerja maksimum dengan pengeboran samping: 2250 mm Lebar kerja maksimum tanpa pengeboran samping: 2800 mm Unit bor kiri: 5 mata bor / jarak antar pusat 32 mm Unit bor kanan: 3 mata bor / jarak antar pusat 32 mm Hodpfjyuuyaox Ag Refd Pengeboran atas: 1 x 7 + 1 x 5 + 1 x 5 + 1 x 3 mata bor (total 4 unit) Pengeboran belakang: 1 x 7 + 1 x 7 + 1 x 7 + 1 x 5 mata bor (total 4 unit) Pengeboran bawah: 1 x 3 + 1 x 1 mata bor (total 2 unit) Magasin dengan konveyor balik ke operator Tampilan digital dengan berbagai siklus pengeboran Pembacaan panjang digital pada semua unit pengeboran

Kondisi: sangat baik (bekas), Nomor katalog 7787 DATA TEKNIS - Diameter alat: 14 mm - Kedalaman lubang maks: 170 mm - Panjang milling maks: 180 mm - Pengaturan kepala bor maju/mundur - Pengaturan meja naik/turun & ke samping - Sudut putar meja +/-20˚ - Dimensi meja kerja: 620x280 mm - Penjepitan material - Daya motor: 1,5 kW - Rem - Dimensi (P/L/T): 1070x660x1250 mm - Berat: 300 kg KEUNGGULAN – Buatan Polandia – Kondisi sangat baik – Bor bekas Harga netto: 5.900 PLN Harga netto: 1.400 EUR Harga netto dihitung dengan kurs 4,2 PLN/EUR (Saat terjadi fluktuasi nilai tukar yang signifikan, harga dapat berubah) Hfsdpfoxt It Ajx Ag Rjd

Kondisi: sangat baik (bekas), Nomor katalog 7689 DATA TEKNIS - Diameter alat: 16 mm - Kedalaman lubang maksimum: 160 mm - Panjang frais maksimum: 160 mm - Penyesuaian unit bor: depan/belakang, atas/bawah, dan samping - Dimensi meja kerja: 600x320 mm - Penjepitan material - Daya motor: 2,2 kW - Dimensi (P/L/T): 950x740x1330 mm - Berat: 283 kg KEUNGGULAN – Produksi Polandia – Kondisi sangat baik – Mesin bor bekas Harga netto: 6300 PLN Hsdsyarazepfx Ag Rjfd Harga netto: 1500 EUR dengan kurs 4,2 EUR (Harga dapat berubah seiring fluktuasi nilai tukar yang signifikan)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1981, Segera tersedia dari perakitan alat CH: Mesin Bor Radial Cepat HKS Tipe HKS 40 Tahun pembuatan 1981 MK 4 Kapasitas bor 40 mm Jangkauan 1120 mm Hedpfx Ageyuwiqo Refd Tinggi pemasangan 780 mm Meja 1520 x 560 mm Indikator digital 3 sumbu untuk penyesuaian meja Daya penggerak spindle 3,8 kW Kecepatan spindle 26 – 1940 rpm Stroke quill 200 mm Feeder 0,05 – 0,45 mm/menit Perangkat pembuatan ulir Perlengkapan pendingin Total daya penggerak 6,5 kW Catok hidrolik Berat 2600 kg Harga Euro 2.500.— belum termasuk PPN ex lokasi

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tool holder: MK 5 Hfedpfx Ageyuwpdo Rsd Drilling capacity in ST60: 50 mm Speed range, stepless: approx. 40 - 180 rpm + 180 - 800 rpm 5 feeds: 0.1 / 0.14 / 0.2 / 0.28 / 0.4 mm/rev Table surface: 880 x 670 mm Throat depth: 385 mm

Kondisi: baik (bekas), Kode: 0405 Merek: VITAP - ITALIA Model: ALFA 21 Mesin bor multi-spindle untuk furnitur, dapur, furnitur kustom, furnitur kamar mandi, dan berbagai keperluan lainnya Hsdpfx Aeyrrhieg Refd Data teknis: Jumlah spindle: 21 - Jarak antar pusat mm 32 Kedalaman bor maksimum mm 80 Dimensi meja mm 860 x 500 Putaran spindle 2800 rpm Daya motor 2,5 Hp Kepala miring 0-90° Tekanan kerja 6-8 atm Dimensi keseluruhan mm 950 x 800 x 1140 h Berat kg 300

Kondisi: bekas, Technical Details: Drilling capacity in steel (diameter): 28 mm Throat depth: 345 mm Drilling stroke: 190 mm Drilling capacity in cast iron: Ø 35 mm Spindle taper: MK 4 Spindle speed: 50 - 1280 rpm / 4-step stepless Feed: 0.1; 0.2; 0.3 mm/rev, manual/automatic Distance spindle/table max.: 200 - 800 mm Table clamping surface: 450 x 600 mm Table rotation: 360° Table adjustment: vertical 600 mm Column diameter: Ø 160 mm Machine weight approx.: 273 kg Machine dimensions approx. LxWxH: 1.0 x 0.71 x 2.0 m Hfsdoyq Rpijpfx Ag Rod Thread cutting by selectable right and left-hand rotation via foot switch and/or depth stop Table adjustment by handwheel Coolant system Machine vice Quick-change chuck Röhm Supra 3 - 16 mm Slight damage to the cover as seen.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 030724/2003, Mesin bor dan freis bekas Serrmac TCO 40. Model: TCO 40/P Spindle: MK4 Kapasitas bor hingga 40 mm Tahun pembuatan: 2003 Transmisi sabuk - 3 puli Kecepatan spindle: 100 - 2200 rpm Perubahan kecepatan – 2x lewat motor, 5x lewat penggantian sabuk Hodpfx Agjwrb Sxe Rofd Dimensi meja: 630x255 mm Perjalanan meja: 425x240 mm Pompa pendingin cairan

Kondisi: baik (bekas), Mesin bor tiang bekas dalam kondisi baik. Kapasitas bor kontinu/normal: 25/30 mm. MK3. Kedalaman bor 120 mm. 2 lingkaran kecepatan hingga 1000/hingga 2000 rpm. Hfjdpfxjyuvkgj Ag Red

Kondisi: bekas, Drilling capacity in steel (diameter): 20 mm Throat depth: 322.5 mm Drilling stroke: 160 mm Drilling capacity in cast iron: 23 mm Feed rate: 1-3000 mm/min Tool holder: SK 30 Spindle speed: 55-5000 rpm Table clamping area approx. 614 x 370 mm Column diameter: 145 mm Machine weight approx. 550 kg Hfodpfxjyrhyns Ag Rod Equipped with multi-spindle drill head ARBO 20 Automatic turret drilling head with 6 machining stations Type: ARBO 20 6 machining spindles selectable incl. spindle guard, flange quill, extended column, special software, without safety guard on the machine table Operating manuals available (for both machine and turret head) The machine is in good condition and has had little use. It comes from a public institution. Standard equipment: - Machine table adjustment and clamping at the rear of the machine - Full motor protection with cold conductors for thermal overload protection – insulation class F (155°C) - Max. 10 threads/min (depending on spindle speed) - Special software for freely programmable machining cycles according to DIN/ISO - Drilling depth input via numeric keypad - Zero point setting via external manual control unit - Operating hour counters for spindle, feed, and piece counting for cutting data collection and machining cycles - Drilling depth programming with automatic rapid traverse in forward/reverse - Precision synchronous threading without compensating chuck, max. 10 threads/min (depending on spindle speed) - Special software for freely programmable machining cycles according to DIN/ISO - Drilling depth input via numeric keypad - Zero point setting via external manual control unit - Operating hour counters for spindle, feed, and piece counting