Beli Berdinding Ganda bekas (2.129)

Kondisi: bekas, Tahun pembuatan: 2019, kapasitas tangki: 15.000 l, translation-001 Kodpfx Aasxqb Tdeyodw

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Diesel tank - Heating oil tank - Tank system - Steel tank - Diesel storage - Storage container Kdjdpji A Hx Iofx Aayjw Factory-new – 100 m³ capacity – compliant with EN 12285-2 – Class B (as a replacement for DIN 6616), above-ground, double-walled, including test certificate, suitable for installation in areas classified as earthquake zone 0. The tank is equipped with two saddle supports, a manhole with dome cover, and comes fitted with the following accessories: 1 fill pipe with TW closure (filling cap) and dip tube, 1 gauging pipe with dipstick and dipstick cap, 1 vent pipe with vent cowl, 1 factory-new overfill prevention device with type approval (AIII), 1 ladder, plus 1 spare socket for withdrawal purposes, 1 optical leak detector with type approval and leak detection fluid. The tank exterior is sandblasted, primed, and finished in RAL7011 iron grey. (Other RAL colour shades available at additional cost.) L = approx. 15.80 m – D = 2.90 m – Weight approx. 19.0 t – ex works, loaded free of charge – (For transportation purposes, the dome cover and fittings are supplied loose and must be installed on site!) General information: You will receive an invoice with VAT disclosed. Purchase is subject to our general terms and conditions. Other tank systems (new and used), as well as rental units, are also available! We also purchase existing tank systems and, with certified specialist expertise according to the German Water Resources Act (§ 62 WHG), can professionally empty, clean, dismantle and transport them away.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, The container has been fitted with baffle plates (wave breakers) to facilitate the handling of viscous materials and to promote mixing. The material can be heated or cooled using the tank’s double jacket (mantle). Stainless steel tank! Processing is carried out with liquid. Dimensions: Height: 1000 mm Diameter: 850 mm Volume: 550 l Kdjdpfx Aaeg Rcp Hjyjw Electric motor: Manufacturer: Bauer Type: D7300 Power: 1.5 kW Speed: 32 rpm Purchase of industrial equipment and machinery. Wide selection of used machinery and industrial plants.

Kondisi: sangat baik (bekas), Double-walled diesel fuel tank, 2,500 litres, with independent dispensing cabinet, total throughput 11,000 litres. Complete set of documentation and keys included. All equipment components comply with stringent safety standards and are precisely integrated, ensuring a top-quality, user-friendly product. Specification: Kdodpfxev Rpl Es Aayew 1. Spacious dispensing cabinet 2. Red-coloured door 3. 2" filling connection with VK50 Euro-coupling 4. Electronic overfill prevention system 5. FMT digital rotary flowmeter 6. 440 mm inspection hatch in the inner tank for convenient access 7. Air vents 8. Earthing/grounding terminal 9. Suction hose with non-return valve and mesh filter 10. ROTAXX 60 vane pump (230V; max. 60 l/min) 11. Emergency power cut-off switch 12. Cartridge fuel filter, 10 micron 13. 6 m delivery hose 14. Delivery hose holder 15. Automatic nozzle 16. Nozzle holder 17. Ultrasonic level indicator with leak sensor 18. Service cover on outer tank

Kondisi: baik (bekas), Commercial and on-site fuel stations available in capacities ranging from 2,000 to 7,000 liters - Multiple units available Kdsdpfxsil Hmus Aayjw - Used condition - Double-walled construction - Professionally cleaned - DEKRA inspection available upon request - Pump or dispensing unit optional Loading and transport can be arranged. Only serious and legitimate inquiries will be answered. Please provide your name, email address, and telephone number.

Kondisi: siap digunakan (bekas), General information Location Bremen Condition unused Container Volume 15,000 liters Design horizontal Technical specifications / Dimensions Internal diameter 2,200 mm External diameter 2,350 mm Cylindrical length 3,400 mm Overall length 4,460 mm End wall thickness 5.3 mm Cylinder wall thickness 6 mm Year of manufacture 2019 Kdsdpjt Aw Inofx Aaysw Equipment Documentation Drawings, various documentation, structural calculations Manhole / Dome on the container Nameplate Equipment Lifting lugs, safety jacket (double-walled with leakage monitoring) Outlet not available Remarks Safety double jacket made of V2A (stainless steel) around the container; various technical documents (in French and English); Manhole DN 500 with dip tubes; Tanks have (partially more severe) dents in the double jacket (one tank also in the inner vessel; see photos); Connections for the safety double jacket cut off. Material specification

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C123969, diameter mata gergaji: 500 mm, kecepatan rotasi (maks.): 2.820 rpm, berat keseluruhan: 1.490 kg, penyesuaian kemiringan mata gergaji: 22 °, DETAIL TEKNIS Kecepatan putar: 2.820 rpm Jumlah pisau gergaji: 2 Diameter pisau gergaji: 450 & 500 mm Sudut potong: 22° - 90° Motor Daya motor pisau: 2,2 kW DETAIL MESIN Kodpfxoxwnhuj Aayodw Berat: 1.490 kg Motor Daya motor pisau: 2,2 kW Data Listrik Daya: 5,3 kW Arus: 13 A Tegangan: 400/3 V Frekuensi: 50 Hz PERLENGKAPAN Konveyor serbuk Catatan: Mesin tersedia mulai 01.12.

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Dongshin (Korea) Model: DDC-300 Kapasitas: 300 ton Panjang Langkah: 300 mm SPM: 25 Tinggi Cetakan: 650 mm Penyesuaian Slide: 200 mm Luas Slide, Luas Meja: 2500 x 1500 mm Tinggi Kerja: 750 mm Tahun Pembuatan: 2000 Dalam kondisi sangat baik dan berfungsi penuh Digunakan di pemasok perusahaan manufaktur besar di Korea Selatan Kedpfx Aaoxuqwtsyjdw Video kerja tersedia atas permintaan tersedia dengan harga yang sangat kompetitif.

Kondisi: bekas, Tahun pembuatan: 1972, Pressure: 800 t Column gap: 3250 mm Stroke: 1100 mm Kdsdpfsvuuhyjx Aayjw Distance table/ram, stroke up: 1900 mm Table surface: 3100 x 1900 mm Blank holder pressure in table: 300 t Blank holder stroke in table: 300 mm Blank holder area in table: 2500 x 1800 mm Blank holder pressure in ram: 80 t Blank holder stroke in ram: 200 mm Blank holder area in ram: 2200 x 1000 mm Ram surface: 3100 x 1900 mm Lateral column opening: 900 mm Oil capacity: 4700 l Drive power: 200.0 kW Space requirement (LxWxH): 4.95 x 3.3 x 10.2 m Height above floor: 7.05 m With electro-hydraulic drive, hydraulically controlled blank holder in table and ram, hydraulic cutting impact damping. Dismantled and stored – Video at seller available before dismantling.

Kondisi: bekas, Tahun pembuatan: 1973, dengan gergaji bundar di sisi kiri, dapat diputar hingga 45°, ukuran potong 2200 x 2500 mm, 3 motor masing-masing 4,5 kW, kedua gergaji potong dapat diputar 45° - 90°, masing-masing dengan motor scoring. Ketiga gergaji hingga diameter 400 mm, lebar potongan terkecil 210 mm. Kedua gergaji scoring dapat digerakkan maju-mundur secara pneumatik, dengan vakum untuk fiksasi papan. Lokasi penyimpanan: Nattheim. Kdsdpfovvkm Iox Aayow

Tahun pembuatan: 2010, jam operasional: 29.000 h, Kondisi: sangat baik (bekas), DE27699 Kdodpfexykcgsx Aaysw

Kondisi: bekas, Tahun pembuatan: 1973, Pressure: 1,600 t Column gap: 4,100 mm Ram stroke: 1,450 mm Distance table/ram, ram up: 2,750 mm Distance table/blank holder, ram up: 2,200 mm Table area: 4,000 x 2,200 mm Ram force: 1,000 t Blank holder force: 600 t Blank holder stroke: 1,000 mm Blank holder area: 4,050 x 2,200 mm Ram area: 3,200 x 1,650 mm Cushion force in table: 360 t Cushion stroke in table: 300 mm Cushion area: 3,500 x 1,600 mm Lateral column passage: 1,100 mm Oil capacity: 9,000 l Ksdpfxjvut Ifj Aayodw Drive power: 390.0 kW Weight: 250.0 t Space requirement (W x D x H): 5.95 x 4.3 x 10.5 m Height above floor level: 8.6 m With oil-hydraulic drive, hydraulically controlled die cushion in table and ram Dismantled, stored – video from seller available prior to dismantling.

Kondisi: bekas, Tahun pembuatan: 2010, Pressure: 600 t Frame gap: 3640 mm Fixed stroke: 350 mm Stroke rate: 11 - 44 strokes/min Shut height (stroke + ram adjustment at top): 1550 mm Side frame opening: 2200 mm Bolster area: 3600 x 2500 mm Ram area: 3600 x 2500 mm Ram adjustment: 400 mm Strip width: 2000 mm Material thickness: 0.6 - 2.5 mm Material cross-section: 1600 x 2.5 mm² Kdodpfxjvut Dyj Aaysw Coil weight: 35.0 t Number of straightening rolls: 13 Straightening roll diameter: 50 mm Blanking line / cut-to-length line (press, coil line, blank stacker) Year of manufacture: 1993 - 2010: new Siemens S7 control system - Schuler press, EBS 4-600-3.6-350 with steplessly adjustable articulated drive, flywheel brake, pneumatic clutch/brake combination, hydraulic overload protection on ram, pneumatic ram counterbalance, motorized ram adjustment, ram locking Sliding table (2x) without rails for transfer table - Schleicher decoiler, HE - 355 - 2100, year 1994 with auxiliary drive, pressure device, traversable - Coil loading station - Schleicher take-off device - Scrap shear - Schnutz straightener, type RME 18/50/13-2000 TZ, year 1994 with steplessly adjustable drive, 30 intermediate rollers, 117 support rollers - Loop bridge - Schleicher roller feeder, type WV-SYS-A 160-2000, year 1994 Blank stacking system / NSM magnettechnik destacking unit Disassembled and stored - video from supplier prior to disassembly available

Kondisi: bekas, Tahun pembuatan: 1997, Pressing force: 1000 t Clearance between uprights: 1260 mm Stroke: 315 mm Stroke rate: 10, 21 - 42 /min Distance table/ram, large stroke at top, adjustment at top: 1295 mm Table surface: 1250 x 800 mm Table height above floor: 670 mm Lateral clearance between uprights: 830 mm Ejector force in table: 63 t Ejector stroke in table: 75 mm Ejector force in ram: 16 t Ejector stroke in ram: 23 mm Ram surface: 1250 x 800 mm Ram adjustment: 20 mm Transfer feed length: 0 - 250 mm Programmable slide travel per guide: 0 - 140 mm Kodpfx Asvuukuoayedw Transfer device stroke rate: 42 /min Drive power: 135.0 kW Weight: 120.0 t Space requirements (W x D x H): 5.9 x 4.8 x 7.95 m Height above floor: 6.95 m Height below floor: 1.0 m with DC drive, pneumatic clutch, motorized ram wedge adjustment, pneumatic ram weight compensation, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram locking, tool clamping system for table and ram, motorized central lubrication, oil impulse lubrication, grease lubrication Press control: Siemens S5 - CNC 2-axis transfer (manufacturer Dreher, type STV-D model 350/100-SO, year 2008), control Siemens S7 - Cleaning system (manufacturer Beyss, year 1989) as is and lies, WITHOUT commissioning, disassembled and stored The press was installed in a soundproof cabin by the previous owner, which is not included in the scope of delivery Video of the machine prior to disassembly available

Kondisi: bekas, Tahun pembuatan: 1980, Press force 400 t Upright distance 3,250 mm Distance table/ram, full stroke top, adjustable at top 1,000 mm Stroke 800 mm Table area 3,250 x 1,400 mm Table height above floor 1,250 mm Blank holder force 170 t Blank holder stroke 200 mm Blank holder area 1,800 x 1,000 mm Distance between uprights (between stroke dampers) 2,610 mm Kodpjvuk S Isfx Aayjdw Lateral upright clearance 800 mm Ram area 3,250 x 1,400 mm Return force 51 t Downward speed from 300 mm/s Upward speed to 300 mm/s Working speed 16 - 33 mm/s Oil capacity 2,900 l Drive power 100.0 kW Weight 70.0 t Space requirement (WxDxH) 4.9 x 3.1 x 7.6 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) with electrohydraulic drive, pressure/time and stroke-dependent controllable, light curtain (Sick) front and rear, hydraulic blank holder in the table (controllable), hydraulic stroke damping with motorized adjustable depth stop, hydraulic ram locking, two-hand operation As is and as placed, WITHOUT commissioning

Kondisi: bekas, Tahun pembuatan: 1991, press-specs-de-hu-001 Kdedpfx Asvzxqreayjw

Kondisi: bekas, Tahun pembuatan: 1988, Tekanan 315 t Jarak antar tiang 1350 mm Langkah 600 mm Jarak meja/ram, langkah besar di atas, pengaturan atas 1000 mm Kdedjvuk Rqepfx Aayew Luas meja 1200 x 1300 mm Tinggi meja di atas lantai 1245 mm Pembukaan samping antar tiang 1250 mm Luas ram 1200 x 1300 mm Kecepatan turun 750 mm/dtk Kecepatan naik 680 mm/dtk Kecepatan kerja 180 mm/dtk Kapasitas oli 2000 l Daya penggerak 150,0 kW Berat 35,0 t Ruang yang dibutuhkan (PxLxT) 3,3 x 3,3 x 5,5 m Tinggi di atas lantai 5,5 m Disetujui untuk pengoperasian manual sesuai peraturan keselamatan kerja Jerman (UVV) dengan penggerak oli hidraulik, kontrol tergantung tekanan/waktu dan langkah, peredam punch hidraulis dengan pembatasan langkah punch (penyetelan motorik), pengunci ram hidraulis dijual seperti adanya, TANPA commissioning

Kondisi: bekas, Tahun pembuatan: 1996, Pressure 250 t Frame gap 2100 mm Stroke 300 mm Distance table/ram, stroke at top 850 mm Table surface 2000 x 1300 mm Table height above floor 900 mm Lateral frame passage 1300 mm Ram surface 2000 x 1300 mm Oil capacity 1300 l Drive power 60.0 kW Weight 39.5 t Space requirement (W x D x H) 3.4 x 3.4 x 4.6 m Approved for manual loading operations according to CE standards Kodpfxovuuids Aaysdw with oil-hydraulic drive, hydraulic cutting shock absorption, hydraulic ram locking no foundation pit required Available without commissioning or alternatively with new Siemens S7-1500 F control system

Kondisi: bekas, Tahun pembuatan: 1993, Pressing force 500 t Upright distance 2,240 mm Stroke 1,180 mm Distance table/ram, max. stroke up, adjustment up 1,800 mm Table surface 2,050 x 1,800 mm Cushion force in table 250 t Cushion stroke in table 380 mm Cushion area in table 1,800 x 1,200 mm Cushion force in ram 122 t Cushion stroke in ram 200 mm Cushion area in ram 1,800 x 1,200 mm Ram area 2,215 x 1,800 mm Table height above floor 500 mm Speed down from 400 mm/s Speed up 10 – 400 mm/s Working speed 10 – 100 mm/s Foundation depth 3.0 m Drive power 122 + 75 + 64.5 kW Weight 110.0 t Space requirement (W x D x H) 3.6 x 2.2 x 8.5 m Height above floor 6.8 m Kjdpfx Ajvuk I Nsayedw Approved for manual loading operations according to German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic cushion in table and ram, blanking shock absorber, ram locking Foundation depth approx. 3.0 m Press currently being overhauled with Siemens S7 control / Pilz safety control A sister machine can also be offered as-is, partially disassembled.

Kondisi: bekas, Tahun pembuatan: 1993, Pressing force 315 t Distance between uprights 1660 mm Stroke 400 mm Distance table/ram, stroke up 600 mm Table size 1600 x 1000 mm Table height above floor 960 mm Cushion pressure in table 80 t Cushion stroke in table 200 mm Cushion area in table 950 x 650 mm Lateral upright clearance 720 mm Kedpfx Aevuuhmeayedw Ram area 1600 x 1000 mm Oil capacity 1400 l Drive power 57.0 kW Weight 30.0 t Required floor space (W x D x H) 3.0 x 2.9 x 4.4 m Approved for manual loading operations according to German accident prevention regulations (UVV) With oil-hydraulic drive, hydraulic cushion in table Can be offered either as-is (non-running) or alternatively with new Siemens S7-1500 F control system

Kondisi: bekas, Tahun pembuatan: 2006, Presskraft: 250 t Ständerweite: 3.000 mm Hub: 600 mm Abstand Tisch/Stößel (Hub oben): 900 mm Tischgröße: 2.500 x 1.300 mm Tischhöhe über Boden: 1.050 mm Seitlicher Ständerdurchgang: 1.350 mm Stößelfläche: 2.500 x 1.300 mm Senkgeschwindigkeit: ab 500 mm/s Hebegeschwindigkeit: 400 mm/s Arbeitsgeschwindigkeit: 36–64 mm/s Ölvolumen: 2.700 l Antriebsleistung: 137,0 kW Eigengewicht: 54,0 t Platzbedarf (BxTxH): 4,10 x 4,55 x 6,15 m Kdsdpfjvuuhajx Aayow Für Handbelegearbeiten gemäß CE-Norm zugelassen Ausstattung: ölhydraulischer Antrieb, hydraulische Schnittschlagdämpfung, hydraulische Stößelverriegelung Kein Fundament erforderlich Lieferung wahlweise im aktuellen Zustand (ohne Inbetriebnahme) oder mit neuer Siemens S7-1500 F Steuerung

Kondisi: bekas, Tahun pembuatan: 1993, Press force: 315 t Column gap: 2,350 mm Distance table/ram, max. stroke up, adjustment up: 1,200 mm Distance between columns (between cut shock absorbers): 1,600 mm Distance table/ram, stroke up: 1,200 mm Stroke: 800 mm Table area: 2,060 x 1,260 mm Table height above floor: 750 mm Blankholder force in table: 100 t Blankholder stroke in table: 400 mm Blankholder area: 1,250 x 1,000 mm Lateral column opening: 780 mm Ram area: 2,200 x 1,500 mm Ejector force in ram: 63 t Speed, approach: from 500 mm/s Speed, return: 310 / 410 mm/s Kdsdpfx Aajvuugvsysw Working speed: 20 - 73 mm/s Oil capacity: 3,900 l Drive power: 80.0 + 45.0 kW Weight: 55.0 t Required space (WxDxH): 4.6 x 2.7 x 7.2 m Height above floor: 6.0 m Depth below floor: 1.2 m Approved for manual loading according to German accident prevention regulations (UVV) Equipped with oil-hydraulic drive, hydraulic blankholder in table, hydraulic ejector in ram, hydraulic cut shock absorption, hydraulic ram locking Can be offered either as is (partially dismantled, in need of overhaul) or alternatively fully overhauled with new Siemens S7-1500 F control system.

Kondisi: bekas, Tahun pembuatan: 1993, Press force 315 t Upright distance 2060 mm Stroke 700 mm Distance table/ram, stroke at top 1100 mm Table surface 2000 x 1000 mm Cushion force in table 125 t Cushion stroke in table 200 mm Cushion area 1200 x 600 mm Table height above floor 750 mm Table height above floor (when installed at ground level) 1100 mm Kdsdpjvuudzofx Aayew Lateral upright passage 720 mm Ram area 2000 x 1000 mm Oil capacity 1800 l Drive power 90.0 kW Weight 35.0 t Space requirement (WxDxH) 3.6 x 2.75 x 5.65 m Approved for manual feeding work according to German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in the table, cutting shock absorber (with motorized depth adjustment) no foundation pit required can be offered either without commissioning (WITHOUT screen / operator console) or alternatively with new Siemens S7-1500 F control system, including new operator console and interface

Kondisi: bekas, Tahun pembuatan: 1965, Pressure: 160 t Stroke: 15 - 170 mm Strokes per minute: 15 - 40 Upright width: 2050 / 1900 mm Shut height (stroke + ram adjustment at top): 690 mm Side column opening: 800 mm Table surface: 1600 x 800 mm Table height above floor: 900 mm Ram surface: 1620 x 700 mm Ram adjustment: 140 mm Drive power: 15.0 kW Weight: 24.0 t Space requirements approx. 3.3 x 2.3 x 5.3 m (LxWxH) Kjdpfevuk S Usx Aaysdw Total height above floor: 4.8 m Height below floor: 0.5 m Only approved for use with safety tooling or fixed guarding in compliance with German accident prevention regulations (UVV) With steplessly adjustable drive, pneumatic clutch, pneumatic ram weight compensation, motorized ram adjustment, two-hand and foot operation As is, ex site, WITHOUT commissioning

Kondisi: bekas, Tahun pembuatan: 2012, druck-260-t-presse-technische-daten Kdodpfxjvuuk Io Aayjw