Beli Bevel Gear Generator bekas (24.798)

Kondisi: bekas, Tahun pembuatan: 2016, nomor mesin/kendaraan: RTO-101871, jenis bahan bakar: diesel, produsen motor: -, de-001 Isdpewvyuajfx Ab Isa

Kondisi: bekas, Tahun pembuatan: 1990, panjang total: 5.900 mm, tinggi total: 2.000 mm, lebar total: 1.300 mm, de2hu-001 Ijdoxz Du Sopfx Ab Iea

Kondisi: baik (bekas), motor gearbox yang dapat diatur, motor gearbox variabel, elektromotor Iodpfec Nlypjx Ab Ija -Daya motor: 0,37 kW -Rentang kecepatan putar: 190-1000 rpm -Motor: dapat diatur -Diameter poros: Ø 19 mm -Tipe konstruksi: B5 -Jumlah: 1 unit motor tersedia -Harga: per unit -Dimensi: 350/180/H200 mm -Berat: 14 kg

Kondisi: bekas, Tahun pembuatan: 1986, Diameter roda - maks. 150 mm Modul - maks. 5 Ijdpexzuzijfx Ab Ija Modul - min. 0,5 Berat mesin sekitar 10.000 kg Kebutuhan ruang sekitar 6500 × 2700 × 3600 mm

Kondisi: baik (bekas), Tahun pembuatan: 2004, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), tegangan masuk: 400 V, jenis pendinginan: air, bahan bakar: diesel, berat keseluruhan: 2.440 kg, daya semu kontinu: 178 kVA, daya kontinu: 160 kW (217,54 hp), kecepatan rotasi (maks.): 1.500 rpm, Merek: SISU Model: G160S Tahun Pembuatan: 2004 Nomor Seri: 144871 Jam operasional (terbaca): Jam rendah Kapasitas (kVA): 178 Kapasitas (kW): 160 Merek mesin: SISU diesel Model mesin: 634DSRAG Bahan bakar: Diesel Merek alternator: Stamford Model alternator: UC 274H Isdpfx Aexzplisb Ija Tegangan: 231-400 Frekuensi (Hz): 50 RPM: 1500 Ampere (A): 257 Dimensi PxLxT (mm): 2550 x 1400 x 1870 Berat (Kg) ±: 2440 Stok tersedia: 1 unit Dibuat di: Finlandia / Belanda Komentar: >x set darurat, tanpa panel listrik.

Kondisi: bekas, Fungsionalitas: belum diuji, Ferwood Code: RU0009426 - Manufacturer Code: - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Ijdov Hzvuepfx Ab Ija

Kondisi: sangat baik (bekas), Gear motor Flender MBH 125CC-B 27.7/1 Bevel helical gear motor 11 kW at 1400 rpm. 230/400 V, 50 Hz, IP 55 Operated with frequency inverters Suitable frequency inverters Walther Flender ZZ0103069.34003 Sinus Penta available A total of 15 gear motors and 12 frequency inverters available!!! Very good condition, directly from production!!! Ijdek E Htcopfx Ab Iea

Kondisi: bekas, Tahun pembuatan: 2025, nomor mesin/kendaraan: K24I440352, jenis bahan bakar: diesel, produsen motor: Cummins, de-001 Ijdswvd E Aepfx Ab Ioa

Kondisi: baik (bekas), Servomotor, Elektromotor, Gleichstrommotor, Servo-Getriebemotor -Hersteller: Dunkermotoren, Servo-Getriebemotor -Typ: BG 44X25SI -Spannung: 24 V -Drehzahl: 2860 U/min -Getriebe: PLG 52 i = 8:1 -Welle: Ø 12 x 22 mm -Anzahl: 8x Getriebemotor vorhanden -Preis: pro Stück -Abmessungen: 172/58/H52 mm Iodpfx Ajp Hiywjb Ioa -Gewicht: 1,1 kg/St.

Tahun pembuatan: 2015, Kondisi: sangat baik (bekas), Typ: DUAL-PACK 12 Seriennummer: 152656 P12 Baujahr: 2015 Isdpfx Aboqvnpae Ioa Leistung: 500 kg/24h Kältemittel: R404a Kompressor: Copeland Emerson ZB15KCE-PFJ-551 Generator: Geneglace F15 Anschlussleistung: 230 VAC, 1Ph, 50 Hz Abmessungen: 800 x 700 x 700 mm

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Gear Measuring Machine (New/Demonstration Model) Four-axis gear measuring machine for gearings, suitable for workpieces with diameters up to 400 mm. All axes equipped with air bearings for maximum precision. X, Y, and Z axes made of granite for uniform thermal behavior. Granite base frame with high stability and integrated passive vibration damping system. No separate foundations required. The measurement accuracy of gears complies with VDI/VDE 2612/2613, Group I. Standard scope of supply: - Base machine with rotary table Ø 300 mm, counter support (tailstock) - Renishaw SP600 probe - CNC control unit consisting of industrial PC and accessories - Swiveling housing for keyboard, monitor, and mouse - Control panel with 2 joysticks, emergency stop button, override potentiometer - Basic set of probe accessories - Calibration sphere Ø 25 mm with certificate - Software for remote maintenance via Internet - Operating manual, technical documentation - Color: Light grey RAL 9002 and Grey B – RAL 7043 TGear Software: - Software for measuring gears with external and internal toothing, both straight and helical (PTB-certified) - Profile and flank inspection - Pitch and runout inspection - Measurement of crowned gears - Inspection of profile and flank modifications using K-diagram - Numerical measurement of tip and root reliefs - Calculation of Wildhaber dimension, tooth thickness, measurement over 2 balls or 1 ball, measurement over rollers - Inspection of all teeth - Topographical display of tooth flank geometry based on profile and flank measurement - Output of measurement reports in PDF format Additional content: - TStylus – software for probe management - TCali – software for probe calibration - TAlign – calculation of axis positions and compensation up to 2 mm Iodpfoxy Iv Rox Ab Isa - Inspection according to standards (Q-DIN 3961/62), (Q-AGMA 2000), (Q-AGMA 2015)

Kondisi: bekas, Fungsionalitas: belum diuji, Ferwood code: RU0009347 - Manufacturer code: 31320008 - Condition: Used - Functionality: Not tested - If interested, we offer overhaul service, please contact us. Iodsv Hrpfjpfx Ab Ija

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Technical details Wheel diameter - max.: 2-45 mm Wheel width: 250 mm Module - max.: 1.5 mm Module - min.: 0.5 mm Control system: Fanuc 18i-MB Machine weight approx.: 2.2 t Space requirement approx.: 2100 x 1440 x 1700 mm Additional information The combined CNC hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is applied in the small module range. Simply by swiveling the milling spindle from the horizontal to the vertical position and selecting the respective operating mode on the CNC control, the machine can be switched from a worm milling machine to a hobbing machine and vice versa. CNC control Fanuc 18i-MB (conversational/ISO) CNC axes: X-axis: Plunge axis Z-axis: Longitudinal axis C-axis: Workpiece spindle B-axis: Tool spindle V-axis: Loader axis longitudinal A-axis: Swivel axis of the tool spindle head (included as an option) Y-axis: Shift axis (included as an option) Equipped with the following machining programs: - Worm milling - Gear hobbing - Worm hobbing - Bevel gear / spur gear milling - Bevel gear hobbing Milling cycles: - Straight, helical, crowned teeth - Radial, radial-axial, climb and conventional milling - Roughing, finishing - Worm gears - Straight-toothed bevel gears, face gear teeth (optionally in partial process only) - Worms [Equipment] - Coolant tank 300 liters with LNS Turbo MS 250 chip conveyor - Retrofitted and from year of manufacture 2021! - Kraft & Bauer fire extinguishing system - Spiral conveyor - Machine documentation [Technical Data] Workpieces: - Workpiece diameter: 2-45 mm - Max. workpiece length: 250 mm - Gear length: 150 mm - Max. module in steel: - 1 mm (gear hobbing) Isdpexy Nhhsfx Ab Iea - 1.5 mm (worm milling) - 0.5 mm (bevel gear hobbing) Tools: - Cutter diameter: - 16-32 mm (gear hobbing) - 40-63 mm (worm milling) Machine: - Max. setting angle of milling head: - +/- 45° (hobbing) - +/- 30° (worm milling) - Shift path: - 34 mm (manual adjustment) - 34 mm (CNC axis) - Collet/Drawbar: W 20 - Max. speed of workpiece spindle: 770 rpm - Milling spindle drive: 0.55 kW - Max. speed of milling spindle: 8000 rpm Axis drives: - X-axis (plunge) / Travel: 80 mm via CNC - Z-axis (longitudinal feed) / Travel: 190 mm via CNC - C-axis (workpiece axis) via CNC Rapid traverse: - X-axis: 6000 mm/min - Z-axis: 6000 mm/min - Hydraulic unit: 0.37 kW

Kondisi: baru, Aktionspreis €7,700 instead of €9,500 – excl. VAT. - Drill head swivels 360° around the column and is height-adjustable - Gearbox built with traditional, proven technology for maximum torque – helical gears made from fiber-reinforced steel ensure high efficiency, low noise, long service life, and practically maintenance-free operation - Spindle made of steel – features adjustable tapered roller bearings for optimal tool concentricity - Adjustable spindle return spring – return force can be adapted to tool weight - Automatic feed (model M) – at the preset drilling depth, the spindle automatically returns to its initial position (feed gearbox includes automatic overload protection and can also be disengaged manually) - Electromagnetic feed and automatic tapping device (model ME) - High-quality cast iron rectangular table (500 x 400 mm) with T-slots and oil channel – height adjustable and 360° swiveling around the column Isdpow A Ac Hofx Ab Iea - Steel drill column – ensures permanent machine stability and high precision and angular accuracy between drill and table - Base plate with T-slots and oil channel - Equipped with thermal overload protection, undervoltage release and emergency stop switch Optional equipment: - LED work light - Tool kit for MT4 - Machine vice with 150 mm jaws - 2 x T-slot nuts - Key-type drill chuck 1–13 mm B16 Metabo, arbor MT4 - Reducing sleeve MT4/MT3 - Reducing sleeve MT4/MT2 - Reducing sleeve MT4/MT1 - Automatic tapping device - Complete coolant system - Swiveling table fixture 400 x 500 mm - Foot-operated on/off switch for spindle motor - Spindle nose with thread for tool holder - Lower spindle speeds 60–980 rpm - Higher spindle speeds 180–3,000 rpm - Three-arm handle - Cross slide table FB102, 584x242 mm, longitudinal travel 415 mm, cross travel 155 mm - Collet chuck ER, MT4, size 5, with collets 6, 8, 10, 12 and 20 mm - Key-type drill chuck 0–13 mm with MT4 arbor - Key-type drill chuck 3–16 mm with MT4 arbor - Custom paint finish Technical Data: - Drilling capacity: 40 mm - Quill stroke: 190 mm - Tapping capacity (steel/cast iron): M24 / M28 - Spindle taper: MT4 - Spindle speed: 90–1,500 rpm - Number of gearbox speeds: 8 - Max. distance spindle/table: 830 mm - Max. distance spindle/base plate: 1,210 mm - Throat: 330 mm - Table size: 500 x 400 mm - Column diameter: 140 mm - Motor power: 2.6 kW - Voltage: 400 V - Dimensions (W x H x D): 500 x 2,120 x 750 mm - Weight: 310 kg

Kondisi: baik (bekas), Flat gear motor, geared motor, electric motor, electric geared motor, variable-speed geared motor, adjustable geared motor Iodpfxowl Uxlo Ab Ija -Brake: disassembled -Manufacturer: Nord, variable-speed geared motor -Type: SK 42 F-R210 U-112 M/4 BRE -Speed: 14.5–109 rpm -Motor: Type SK 112 M/4 BRE60 -Power: 4.0 kW -Protection class: IP54 -Shaft: Ø 45 x 90 mm -Brake torque: 60 Nm -Dimensions: 840/580/H285 mm -Weight: 105 kg

Kondisi: bekas, Tahun pembuatan: 2022, nomor mesin/kendaraan: ESF08xxxx, 21858 Iodsxypuhspfx Ab Ioa

Kondisi: baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, I have two identical LORENZ LS 304 CNC gear shaping machines for sale. Both machines were manufactured in 1986—one is blue, the other is green. They are both equipped with a BWO CNC 900 control system. Each machine weighs approximately 8.3 tons. These machines come from a special production department at ZF. In the past twenty years, the machines have been regularly upgraded and modernized. Upgrades include, among others, new hydraulic hoses, control cabinet components, various drive motors, as well as the installation of relatively new ELBATRON extraction systems, all in compliance with German production and safety standards. The machines have been continuously maintained and serviced. Technical specifications: - Maximum shaping cutter diameter: 300 mm - Maximum workpiece diameter: 400 mm - Maximum module: 6 - Minimum module: n/a - Gear width: n/a - Table diameter: n/a - Table bore: n/a - Strokes per minute, shaping/scraping: n/a - Total connected load: 11 kW - Machine dimensions: n/a - Control system: CNC - Control system manufacturer and type: BWO CNC 900 Both machines are in excellent condition. Isdpsxyuy Nefx Ab Ija They run smoothly, precisely, and reliably, and are immediately available for operation.

Kondisi: bekas, Tahun pembuatan: 1996, jam operasional: 852 h, jenis bahan bakar: diesel, daya: 80 kW (108,77 hp), Berat kosong: 1.960 kg Iedjxztfmjpfx Ab Ija

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Maximum wheel diameter: 100 mm Wheel width: 26 mm Module – max.: 3 Module – min.: 0.1 Control: Siemens 840 D SL Operating hours: 9,598 h Total power requirement: 45 kW Machine weight: approx. 7 t Space requirement: approx. 4 x 3 x 2.5 m Gleason 100S Gear Shaping Machine For manufacturing cylindrical gears with internal and external teeth, as well as other regularly recurring profiles and shapes on cylindrical workpiece surfaces, including profiling in single-part processes. Ijdpfxov Ehbbe Ab Iea Technical Data: Nominal workpiece diameter: 100 mm Maximum outside diameter: 150 mm Nominal machine module: approx. 3 mm (Reference value, depending on the specific machining task.) Shaping spindle stroke range: 0–3,000 strokes/min Manual stroke position adjustment range: 20 mm Maximum gear width: 26 mm Minimum hydrostatic diagonal guide pitch height: 400 mm Minimum/maximum distance between tool and workpiece axis: -20 / +180 mm Machine column tilt range (manual): -1° / +11° Tool holder (manual clamping): HSK-D63 (Hollow shank taper according to DIN 69063) Machine weight: approx. 7,000 kg With robot cell

Kondisi: baru, Promo price €5,250 instead of €5,850, excl. VAT. Solberga SE2035 - Geared Head Drilling Machine - Drill head can be swiveled 360° around the column and is height-adjustable - Gearbox built with traditional, proven technology for maximum torque – helical gears made from fiber-reinforced steel for high efficiency, low noise, long service life, and an almost maintenance-free gearbox - Spindle made of steel – ensures optimal tool concentricity thanks to its adjustable tapered roller bearings - Adjustable return spring for spindle – return force can be adapted to the tool weight Isdouzhx Aopfx Ab Ioa - Automatic feed (Model M) – upon reaching the preset drilling depth, the spindle returns to its initial position (the feed gearbox is equipped with an automatic overload protection and can also be interrupted manually) - Electromagnetic feed and automatic thread cutting device (Model ME) - High-quality cast-iron rectangular table (500 x 400 mm) with T-slots and oil groove – height-adjustable and 360° swivelable around the column - Drill column made of steel – guarantees enduring machine stability and high precision with perpendicularity between drill and table - Base plate with T-slots and oil groove - Equipped with thermal overload protection, undervoltage release, and emergency stop switch Optional equipment - LED work light - Tool set for MT4 - Machine vise with 150 mm jaws - 2 x T-slot blocks - Drill chuck 1 – 13 mm B16 Metabo, arbor MT4 - Reducing sleeve MT4 / MT3 - Reducing sleeve MT4 / MT2 - Reducing sleeve MT4 / MT1 - Automatic thread cutting device - Complete coolant system - Foot-operated thread cutting device - Foot-operated on/off switch for spindle motor - Spindle nose with thread for tool holding - Cross table FB102 584x242 mm, longitudinal travel 415 mm, cross travel 155 mm - Drill chuck 0 – 13 mm with arbor MT4 - Drill chuck 3 – 16 mm with arbor MT4 - Special paintwork Technical data - Drilling capacity: 35 mm - Quill stroke: 150 mm - Tapping capacity (steel/cast iron): M 18 / M 22 - Spindle taper: MT4 - Spindle speed: 85 – 3160 rpm - Gear stages: 8 - Max. distance spindle/table: 820 mm - Max. distance spindle/base plate: 1150 mm - Throat depth: 320 mm - Table size: 500 x 400 mm - Column diameter: 127 mm - Motor power: 1.6 kW - Voltage: 400 V - Dimensions WxHxD: 500 x 1785 x 700 mm - Weight: 290 kg

Kondisi: baik (bekas), Gear motor, electric motor, geared electric motor, helical gear motor Isdpfx Aewpgideb Isa - Manufacturer: Nord, gear motor with frequency inverter - Model: SK 02-71 L/4 TF TR1 i= 6.89 - Speed: 205 rpm - Motor: Nord type SK 71 L/4 TF TR1, 0.37 kW - Frequency inverter: Nordac Trio SK 370/1 TR - Shaft: Ø 20 x 40 mm - Quantity: 3x gear motors available - Price: per unit - Dimensions: 420/160/H285 mm - Weight: 16.2 kg

Kondisi: bekas, Tahun pembuatan: 2007, machineseeker-specification Iedpfsxylm Hjx Ab Ija

Kondisi: baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, de-hu-it-lt-20240621-1 Isdpfjxyatuox Ab Ija

Kondisi: baik (bekas), Tahun pembuatan: 2004, 10612 Ijdpfxoxxpdgs Ab Isa

Kondisi: baik (bekas), Tahun pembuatan: 1998, Spindle diameter: 90 mm Control system: Siemens SINUMERIK 840 C Operating voltage: 400 V Stroke position adjustment: 100 mm Table bore: 150 mm Strokes per minute: 100-1200 strokes/min Machine weight approx.: 8.0 t Key specifications: Standard module: 6 mm Maximum workpiece pitch circle diameter: 250 mm Maximum gear width (spur gearing): 60 mm Helix angle adjustment: 45° to +0.5° Axis angle: 0° to 90° Center distance between workpiece and reciprocating spindle: -80 mm to +320 mm Stroke position, stroke length, maximum stroke position range (depending on stroke length): 0 mm to 80 mm Iedpfxoxyadte Ab Ija Stroke position adjustment range: 0 mm to 80 mm Stroke drive Infinitely variable stroke rates (standard): 100 to 1200 DH/min Stroke drive motor: 9 kW Maximum cutting speed: 150 m/min Feeds Rotary axes (tool C1-, workpiece C2-axis): Infinitely variable feed, relative to 100 mm pitch circle diameter: 1.0 to 9,420 mm/min Radial axis (column slide X1-axis): Infinitely variable feed: 1.0 to 9,420 mm/min, rapid traverse corresponds to maximum feed rates Connected load / Weight Total connected load: 26 kVA Total weight (standard configuration): approx. 9,000 kg