Beli Bhx 050 bekas (1.237)

Tahun pembuatan: 2022, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, EN001 Kljdswz Iktjpfx Aa Nol

Kondisi: baru, BEST PRICE ON THE INTERNET incl. FREE EXTRAS! 3M SPEEDGLAS G05-03 Scope of delivery: - G05 Helmet - Adflo - Battery - Charger - User manual Ksdpfx Aaswbuk Hs Nsll - Hose Additionally included: 20 replacement protective lenses for the helmet Gloves: 1x TIG, 1x MIG/MAG + heat shield SCOPE OF DELIVERY AS SHOWN IN PICTURES

Kondisi: seperti baru (mesin pameran), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard configuration with Flow Control, Thermal Control, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features add approximately €400 in value at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical; in our opinion, the most sensible feed case – the wire is safely stored in the closed case. ➤ Fronius Intermediate Hose Package, Long – Each machine is supplied with a 5-meter-long connection hose package between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach work areas! The connection hose is neatly stored on a hook at the side of the unit. (Hooks manufactured by us) ➤ Fronius Large Trolley – Arguably the best trolley with gas bottle holder on the market. ➤ Binzel Torch Package – With Up/Down current regulation on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools This set can weld nearly all materials, including aluminum, steel, and stainless steel (V2A). It features push-pull wire programs and is also suitable for MIG brazing (CuSi), which is often used in the sheet metal trade. Other options available at extra cost, e.g. Fronius Aw4000/Aw5000 Job Master Torch Package (torch with display) + €550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE PROVIDED Inspection possible in Vienna 1230, Austria! ✔ Insured pallet shipping is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ Kljdpfjwbil Sox Aa Nol ►►►What is the condition of the machines? To clarify, we purchase almost-new pre-owned machines, disassemble, check everything thoroughly, replace any wear parts as necessary, and only after successful test welding release the machine for sale. "All" machines are clean and have no burn marks on the displays, nor are they riddled with burn holes or dents! You are purchasing an item from us that is also ⭐visually appealing and not completely worn down! ►►►Do we get an invoice when we buy from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community supply within the EU, we can issue a net invoice. ►►►What payment methods are available? Advance payment or cash on collection in person. ►►►Why buy from us? We are professionals specializing in this Fronius welding machine series and always keep 60–80 machines in stock – exclusively Fronius, no other brands! We know these machines inside and out and do not sell anything we are not familiar with.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, en Kljdshitrxepfx Aa Nsl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Dijual burner gas merek Weishaupt G70-(10500 kW) yang berfungsi dan sangat terawat dengan baik, lengkap dengan panel kontrol dan unit kontrol. 1. - Weishaupt: G70 (10500 kW) / BURNER GAS - Tipe burner: G70/2-A - Model: ZM-NR - Daya: 1.000-10.500 kW - 160-881 kg/jam - Tahun produksi: 2006 2. Weishaupt: G70 (10500 kW), burner gas. Tipe burner: G70/2-A Model: ZM-NR Daya: 1.000 - 10.500 kW Tahun produksi: 2006. Kedpfxswgylys Aa Nell

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Brand new filling machine / dosing machine suitable for filling liquids, pastes, creams, oils, etc. Specifically designed for a wide range of fluids and also thicker substances. Suitable applications include: - Shampoos - Creams - Honey - Jam - Milk - Yoghurt - Water - Alcohol Kledpferivv Eex Aa Nsl - Pesto - Disinfectants - Etc. This robust machine is constructed from high-quality stainless steel (RVS) and operates on compressed air and 220V power—plug and play ready! Perfect for filling small production batches. A very small air compressor is sufficient to operate the machine (minimum 12L compressor recommended; we can optionally supply this). The filling machine is equipped with a 500ml cylinder, allowing a maximum fill of 500ml per cycle. By running multiple cycles, higher fill volumes are also easily achieved, for example, 750ml by dispensing 2 x 375ml. The minimum fill per stroke is 50ml; any volume between 50ml and 500ml can be filled in a single cycle. We also offer a model with a 100ml cylinder for fills between 5ml and 100ml per stroke—please contact us for more information. A large 25L hopper is included. Alternatively, the machine can be connected to an IBC or a 200L drum for higher-volume operations. The machine features a foot pedal and an automatic mode: in automatic mode the machine fills continuously, making it easy to fill larger quantities quickly. Filling speed can be adjusted. The foot pedal allows filling at your own pace. Depending on operator speed and dosing volume, you can fill 15–25 units per minute, making this a very fast filling solution. The machine weighs approximately 15–20kg and fits easily on a table. Fully constructed from stainless steel, it is a top-quality, professional-grade machine. Please contact us with any questions—we will be glad to assist you with this or other machines. We also offer a labelling machine which pairs very well with the filler. We aim to respond within 24 hours, and are also reachable by phone during business hours (Monday–Friday, 09:00–17:00). We look forward to helping you!

Kondisi: baru, Tahun pembuatan: 2025, Für das Zerkleinern von Marmor, Sandstein und Quarzit können je nach Eigenschaft des Rohmaterials und angestrebter Endkorngröße verschiedene Brechertypen eingesetzt werden. Im Folgenden finden Sie gängige Brechertypen, die sich für die Aufbereitung dieser Materialien eignen: 1. Backenbrecher: - Backenbrecher werden häufig zur Vorbrechung eingesetzt. Sie zeichnen sich durch ihre robuste Bauweise aus und eignen sich zur Zerkleinerung harter und abrasiver Steine wie Marmor und Quarzit. 2. Prallbrecher: - Prallbrecher sind vielseitig einsetzbar und eignen sich sowohl für die Vor- als auch Sekundärzerkleinerung. Sie arbeiten durch das Auftreffen des Materials auf Prallleisten oder Schlagleisten und erreichen einen hohen Reduktionsgrad. Prallbrecher sind auch effektiv bei der Kornformung des Endmaterials. 3. Kegelbrecher: - Kegelbrecher kommen häufig für die Sekundär- oder Tertiärzerkleinerung zum Einsatz. Sie sind für härtere Gesteinsarten geeignet und erzeugen gut geformte, feinkörnige Zuschlagstoffe. 4. Kreiselbrecher: - Kreiselbrecher werden für großvolumige Primärzerkleinerung eingesetzt. Sie verfügen über einen kegel- bzw. kegelförmigen Brechkopf und sind für abrasive Materialien bestens geeignet, werden jedoch seltener verwendet als Backen- oder Kegelbrecher. 5. Vertikal-Prallbrecher (VSI-Brecher): - VSI-Brecher sind ideal zur Kornformung und Produktion von künstlichem Sand. Das Material wird dabei gegen Prallplatten oder Rotorschleudern geschleudert, sodass feine Körnungen entstehen. 6. Hammerbrecher: - Hammerbrecher werden hauptsächlich für weichere Materialien wie Sandstein eingesetzt. Die Zerkleinerung erfolgt durch den Aufprall der rotierenden Hämmer, wodurch das Gestein entlang natürlicher Schwächezonen aufbricht. 7. Walzenbrecher: - Walzenbrecher kommen für die Zerkleinerung spröder Materialien zum Einsatz. Zwei gegenläufig drehende Walzen verdichten das Material zwischen sich und reduzieren so dessen Korngröße. 8. Raupenmobiler Brecher: - Mobile Brechanlagen bieten Flexibilität und Mobilität am Einsatzort, etwa direkt im Steinbruch oder auf der Baustelle. Raupenmobile Brecher verarbeiten unterschiedliche Gesteinsarten wie Marmor, Sandstein und Quarzit. 9. Siebanlagen: Kodpfx Aeq Nx Nnoa Noll - Nach dem Brechen werden Siebanlagen – beispielsweise Vibrationssiebe – eingesetzt, um die verschiedenen Korngrößen der gebrochenen Materialien zu separieren. 10. Staubunterdrückungsanlagen: - Beim Brechprozess kann viel Staub entstehen. Moderne Staubunterdrückungsanlagen verhindern Belastungen für Umwelt und Gesundheit. Bei der Auswahl eines Brechers für Marmor, Sandstein oder Quarzit sollten Sie auf Faktoren wie Materialhärte, gewünschte Endkorngröße und erforderliche Durchsatzleistung achten. Außerdem ist es ratsam, den Brechprozess in ein gesamtheitliches Anlagenkonzept zu integrieren, das neben Brech- auch Sieb-, Förder- und Waschanlagen umfasst – abgestimmt auf die speziellen Anforderungen des Einsatzbereichs.

Kondisi: baru, de-hu-001 Kljdpfjyb S Arjx Aa Nel

Kondisi: baru, de_hu_001 Klodpsyb S Afofx Aa Njl

Kondisi: baru, de-hu-01 Kjdpfsyb Sy Dsx Aa Noll

Kondisi: baru, Tahun pembuatan: 2023, kapasitas angkut: 4.990 kg, tinggi angkat: 6.013 mm, panjang total: 4.575 mm, - Operator seat device - Load centre mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic Kledexd Hyiepfx Aa Nsl - Track width front/rear mm: 1,104 / 932 - Mast tilt forward/backward α/β °: 7 / 5 - Seat height relative to SIP (low version) mm: 1,342 - Aisle width with pallet 1000 x 1200 transverse mm: 4,370 - Aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Minimum distance to pivot point: 729 mm - Travel speed with load km/h: 20 - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard-Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Drawbar pull with load N: 6,750 - Drawbar pull without load N: 7,430 - Max. drawbar pull (Plus//Standard-Performance) with load N: 22,590 / 19,000 - Max. drawbar pull (Plus//Standard-Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard-Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard-Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard-Performance) with load s: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard-Performance) without load s: 5.7 / 6.2 - Service brake: hydraulically actuated multi-disc brake - Battery voltage V: 80 - Handling capacity (Plus//Standard-Performance) t/h: 324 / 315 - Working pressure for attachments bar: 250 - Oil flow for attachments l: 50 - Sound pressure level (operator’s position) dB(A): 66 - Whole-body vibration: acceleration EN 13059 m/s²: 0.42 - Trailer coupling, type: Pin

Kondisi: baru, Tahun pembuatan: 2022, kapasitas angkut: 4.990 kg, tinggi angkat: 4.430 mm, panjang garpu: 2.400 mm, panjang total: 4.311 mm, - Operator seat device - Load centre mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic - Track width front/rear mm: 1,104 / 932 - Mast tilt forward/backward α/β °: 7 / 5 - Seat height relative to SIP (low version) mm: 1,342 - Aisle width with pallet 1000 x 1200 transverse mm: 4,370 - Aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Minimum distance to pivot point: 729 mm - Travel speed with load km/h: 20 Ksdpoxd Hz Hsfx Aa Nsll - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard-Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Drawbar pull with load N: 6,750 - Drawbar pull without load N: 7,430 - Max. drawbar pull (Plus//Standard-Performance) with load N: 22,590 / 19,000 - Max. drawbar pull (Plus//Standard-Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard-Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard-Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard-Performance) with load s: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard-Performance) without load s: 5.7 / 6.2 - Service brake: hydraulically actuated multi-disc brake - Battery voltage V: 80 - Handling capacity (Plus//Standard-Performance) t/h: 324 / 315 - Working pressure for attachments bar: 250 - Oil flow for attachments l: 50 - Sound pressure level (operator’s position) dB(A): 66 - Whole-body vibration: acceleration EN 13059 m/s²: 0.42 - Trailer coupling, type: Pin

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 4.990 kg, tinggi angkat: 6.060 mm, panjang total: 3.980 mm, - Operator seat device - Load centre mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic Ksdpfoyb Tm Esx Aa Njll - Track width front/rear mm: 1,104 / 932 - Mast tilt forward/backward α/β °: 7 / 5 - Seat height relative to SIP (low version) mm: 1,342 - Aisle width with pallet 1000 x 1200 transverse mm: 4,370 - Aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Minimum distance to pivot point: 729 mm - Travel speed with load km/h: 20 - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard-Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Drawbar pull with load N: 6,750 - Drawbar pull without load N: 7,430 - Max. drawbar pull (Plus//Standard-Performance) with load N: 22,590 / 19,000 - Max. drawbar pull (Plus//Standard-Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard-Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard-Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard-Performance) with load s: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard-Performance) without load s: 5.7 / 6.2 - Service brake: hydraulically actuated multi-disc brake - Battery voltage V: 80 - Handling capacity (Plus//Standard-Performance) t/h: 324 / 315 - Working pressure for attachments bar: 250 - Oil flow for attachments l: 50 - Sound pressure level (operator’s position) dB(A): 66 - Whole-body vibration: acceleration EN 13059 m/s²: 0.42 - Trailer coupling, type: Pin

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, daya laser: 5.000 W, CNC laser cutting system TC L 3050 5000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Controller: Siemens Sinumerik 840D Laser power: 5000 watts Operating hours: 72,846 h Beam-on hours: 22,118 h Sheet thickness St. max.: 25 mm Sheet thickness stainless max.: 20 mm Sheet thickness Al. max.: 12 mm Standard equipment: - Hi-Las high-pressure cutting Kedpfx Aajybaddo Njll - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Quick-change cutting head system - Automatic sheet edge detection - PCS Process Control System - Positioning laser diode - Programmable cutting gas selection/pressure adjustment - Microweld - PMS plasma sensor - Sprintlas - Capacitive height sensing (DIAS III) - ContourLas - AutoLas Plus - Oil spray system - Automatic pallet changer - Automatic nozzle cleaning - Workspace lighting - Conveyor for small parts/waste - Multi-chamber extraction - Compact dust collector - Auto shut-off - Safety features (light barriers) - ToPs 100 lite - RJ 45 network connection - 3.5'' floppy disk drive - Comprehensive operating manual - Machine pedestal version without steel construction - 9-inch cutting head - High-speed cutting head 3.75-inch - LoadMaster left

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 9.600 h, Fuel type: Electric Unladen weight: 6,504 kg Dimensions (L x W x H): 300 x 140 x 242 cm Lifting capacity: 5,000 kg Lift height: 330 cm Fork length: 1,150 mm - Year of manufacture: 2007 - Documentation available: Yes - CE certificate present: No - Operating hours: 9,600 - Lifting capacity: 5,000 kg Kledpfx Aaewh Sx Ue Nol - Lift height: 3,300 mm - Overall height: 2,420 mm - Free lift: 0 mm - Fork length: 1,150 mm - Number of wheels: 4 wheels - Attachments: 4th valve to fork carriage, side shift - Options: Working lights - Mast: Duplex - Inspection valid until: 04.2025 - Drive: Electric - Make/Model: Midac 40/6MDL155N - Year of battery: 2016 - Capacity: 930 Ah - Battery voltage: 80 V - Battery test result: 50% - Transport dimensions: 3,000 mm x 1,400 mm x 2,420 mm (l x w x h) - Transport weight [kg]: 6,504 kg - Transport packages [qty]: 1 Financial Information VAT: The indicated price is exclusive of VAT VAT/differential taxation: VAT deductible for business customers Delivery and trade-in possible at any time for all industrial equipment Tess van den Boom

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Inggris11050/1300 (2017) Klodpfx Aasyaat Aj Nol

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 0102-240014, en-001 Kljdpor Hrrlefx Aa Nel

Kondisi: bekas, daya: 159 kW (216,18 hp), jenis bahan bakar: diesel, tinggi angkat: 29.700 mm, Tahun pembuatan: 2008, jam operasional: 8.474 h, Empty weight: 23,000 kg Engine make: Perkins Lifting capacity: 5,000 kg Maximum speed: 40 km/h Klsdewx D Naspfx Aa Njl Serial number: 756947 Front tyre condition: 80% Rear tyre condition: 80% Transport dimensions (L x W x H): 7.8 x 2.5 x 3.2 m Please contact PFEIFER GROUP for further information.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, produsen pengendali: CYBELEC, model controller: Cybelec control system, panjang langkah: 100 mm, jumlah sumbu: 4, berat keseluruhan: 9.700 kg, tinggi total: 2.700 mm, Mesin press rem 4-sumbu PHSI 100x3050 dari Vimercati ini diproduksi pada tahun 2005. Mesin ini memiliki lebar kerja 3050 mm, daya motor 9 kW, dan daya tekan 100 ton. Dimensi mesin adalah 3500 x 2000 x 2700 mm dengan berat 9700 kg. Dilengkapi dengan kontrol Cybelec yang telah direkondisi total. Pertimbangkan kesempatan untuk membeli mesin press rem Vimercati PHSI 100x3050 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Keunggulan mesin Kjdeyaqv Uopfx Aa Njll Keunggulan teknis mesin • Lebar kerja benda kerja: 3050 mm • Bukaan mesin untuk benda kerja: 500 mm Informasi tambahan Mesin masih terhubung listrik Dimensi Kedalaman mesin 3500 mm

Kondisi: sangat baik (bekas), Heavy-duty pallet Klsdpfoma Dagjx Aa Nel L. 1250 x W. 1050 mm Height: 140 mm Board thickness: 35 mm Weight: 44.5 kg Multiple units available

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, gaya penjepit: 160 kN, Clamping force: 160 t Screw diameter: 45 mm Ksdex Up T Njpfx Aa Njll Type: Horizontal Drive: Hydraulic

Kondisi: baru, Tahun pembuatan: 2025, en-GB Kjdpfswkf Izex Aa Nell

Kondisi: baik (bekas), Tahun pembuatan: 1981, druck-300t-ott-hydraulikpresse Kedpfxjx Uru No Aa Nsll

Kondisi: baik (bekas), Paint spraying unit, GRACO MERKUR paint pump + Graco G40 spray gun. Kljdpfxeulc S Re Aa Nel

Kondisi: bekas, Tahun pembuatan: 2022, kapasitas angkut: 5.000 kg, tinggi angkat: 7.270 mm, panjang total: 5.670 mm, - Load capacity: 4,999 kg - Load center: 500 mm - Load distance: 540 mm - Axle load with load (front): 10,468 kg Kodpox Ur Nyjfx Aa Nell - Axle load without load (front/rear): 2,956/3,635 kg - Tire size front: 355/45-15 - Tire size rear: 250-15 - Number of wheels front/rear: 2/2 - Track width front (single tires): 1,210 mm - Track width front (dual tires): 1,364 mm - Track width rear: 1,120 mm - Mast/carriage tilt, fwd/rev: 3/7 degrees - Seat height: 1,298 mm - Coupling height: 496 mm - Fork carriage: Category 3 / Form A - Aisle width with pallet 1000 x 1200 (crosswise): 4,470 mm - Aisle width with pallet 800 x 1200 (lengthwise): 4,670 mm - Turning radius: 2,730 mm - Smallest pivot point: 746 mm - Travel speed with/without load: 20/20 km/h - Lifting speed with/without load (min. fan speed): 0.50/0.53 m/s - Lowering speed with/without load: 0.50/0.50 m/s - Gradeability with/without load: >30 % - Service brake: mechanical - Engine manufacturer/type: Deutz/TCD 2.9 L4 - Rated speed: 2,200 rpm - Max. torque: 260 Nm - Number of cylinders/displacement: 4/2,900 cm³ - Working pressure for attachments: 250 bar - Oil flow for attachments: 30 l/min - Trailer coupling: Pin type