Beli Bhx 055 bekas (255)

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW brand gear motor. Support legs are not included in the scope of delivery; these are optionally available upon request. Belt curves are commonly used in intralogistics for in-plant transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out with their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are not an issue. Tapered rollers and a specially developed belt guide system ensure maximum smooth running. The displayed images of the conveyor system were taken while still installed in a logistics center. Technical specifications: Model: Belt Curve Conveyor TS 1600-105 Conveying length, center radius (NL): 759 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Itsdpfx Aask Abuij Njb Support legs optionally available Conveying speed (v m/s): 0.03-1.05 m/s Drive: SEW Gear Motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-ply, green, smooth, type KT36 Year of manufacture: 2001 Special features / accessories: side guides on both sides included Optional available: Support legs Side guides (single-sided and double-sided) Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, simply contact us. Reach us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW brand gear motor. Support legs are not included in the scope of delivery; these are optionally available upon request. Belt curves are commonly used in intralogistics for in-plant transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out with their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are not an issue. Tapered rollers and a specially developed belt guide system ensure maximum smooth running. The displayed images of the conveyor system were taken while still installed in a logistics center. Technical specifications: Model: Belt Curve Conveyor TS 1600-105 Conveying length, center radius (NL): 759 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support legs optionally available Conveying speed (v m/s): 0.03-1.05 m/s Drive: SEW Gear Motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double-ply, green, smooth, type KT36 Year of manufacture: 2001 Special features / accessories: side guides on both sides included Optional available: Support legs Side guides (single-sided and double-sided) Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg Iodjk Aa Ukepfx Aa Netb For individual, professional advice, simply contact us. Reach us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Left GKF 180°-750-550 IR1000 RA1483 The Transnorm belt curve is in good condition (used) and fully functional. It is equipped with a SEW-branded gear motor. Supports are not included in the scope of delivery, but are available on request as an option. Belt curves are commonly used in intralogistics for the internal transport of unit loads and have become an indispensable part of modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating hours are no problem. Tapered rollers and a specially developed belt guiding system ensure maximum running smoothness. The images shown of the conveyor system were taken while still installed in a logistics center. Technical Data: Model: Belt Curve Conveyor TS 1600-105 Conveying length (middle radius/NL): 4820 mm Frame width (NB): 750 mm Itsdpfx Ajk Abcrea Njb Belt width (GuB): 550 mm Installation height (BH): 210 mm Inner radius (IR): 1000 mm Conveying angle: 180° Support feet: optionally available Conveying speed (v m/s): adjustable upwards and downwards with frequency inverter Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double-layered, green, smooth, KT36 (see pictures for wear) Year of manufacture: 2001 Special features / accessories: Side guides included on both sides Optional: Supports All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice please feel free to contact us. Simply call or email us. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you soon. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Kondisi: bekas, Tahun pembuatan: 2007, Gebhardt Roller Curve Conveyor 90° Right 610-550 with 2x Straight Section RA1282 The Gebhardt roller curve is from 2007 and is in very good (used) condition. It is equipped with a SEW brand motor. Supports are included in the delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Year of manufacture: 2007 Condition: very good (used) Motor: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB): 610 mm Usable width (NUB): 550 mm Length of straight section: 1 x 300 mm + 1 x 150 mm Motor type: SEW gear motor Motor power: 0.37 kW / S1 50 Hz 2.00 / 1.15 A Conveying speed: 0.37 m/sec Drive: head drive Rollers: Type: G6/50, glide bearings with conical plastic element Weight: 110 kg Scope of delivery: with supports, 670 mm roller top edge Price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For customized, professional advice, please do not hesitate to contact us. You can reach us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Itsdpok Aa Ryjfx Aa Nob Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Kondisi: bekas, Lippert lead-in/out belt, belt conveyor GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 mm, or 820 mm with belt width 600 mm Frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm Overall height (BH): 105 mm Support legs: optionally available Conveying speed (v m/s): speed is matched to the main belt via gear ratio Drive: toothed belt drive Return roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Options available: Support stands Side guides, single- or double-sided Please note that a suitable sprocket must be fitted on the output shaft for the belt drive. As a result, it may be necessary to use a different return roller. Please contact us for further details. Itedpfxsmqty Rs Aa Njb Damaged belts are replaced prior to delivery. All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For individual, professional advice, please contact us directly. Simply call us or send us an email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact partner for intralogistics

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor, Left-Hand GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve conveyor is in good condition (used) and fully operational. It is equipped with a SEW brand geared motor. Support legs are not included. These are optionally available upon request. Belt curves are frequently used in intralogistics for transporting unit loads within facilities and are indispensable in modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive across the entire belt width, long-duration operation is not an issue. Tapered rollers and a specially engineered belt guidance system ensure maximum smoothness and quiet running. The images show the conveyor system as installed in a logistics center. Technical Specifications: Model: Belt Curve Conveyor TS 1600-105 Conveying length (centerline radius, NL): 680 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 600 mm Curve angle: 45° Support legs: optionally available Conveying speed (v m/s): 0.03 – 1.05 m/s Drive: SEW geared motor SA37 DT80K4/MM05/BW1 Electrical specs: 50Hz, V380-500, kW 0.11 / 0.55 / S1 Belt: double-layer, green, smooth, KT36 (see photos for wear) Year of manufacture: 2001 Optionally included: Support legs Side guide (single-sided and double-sided) All prices net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For individual, professional consultation, please feel free to contact us by phone or email. We are happy to support you in the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics. Itodpfx Ask Aba Tja Nob

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good used condition and fully operational. It comes equipped with a SEW brand geared motor. Support stands are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for in-house transport of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves are renowned for their performance and reliability. Thanks to a low-tension drive across the entire belt width, they are designed for extended operation times. Tapered rollers and a specially developed belt guide system ensure maximum running smoothness. The images shown display the conveyor system while still installed in a logistics center. Technical data: Designation: Belt Curve Conveyor TS 1600-105 Conveying length (center radius, NL): 3900 mm Frame width (NB): 750 mm Belt width (GuB): 550 mm Overall height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° Isdpfxok Aa T Rs Aa Njtb Support feet: optionally available Conveying speed (v m/s): adjustable up and down via frequency inverter Drive: SEW geared motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: double-layer, green, smooth Year of manufacture: 2001 Special features / accessories: Side guides included on both sides Optionally available: - Support stands - Side guides (one-sided or double-sided) Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply contact us. Just reach out to us by phone or email. We are happy to assist with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Kondisi: bekas, Tahun pembuatan: 2000, Transnorm Belt Curve Conveyor right GKF 70°-730-550 IR600 RA1936 The Transnorm belt curve is fully functional. It is equipped with a SEW brand gear motor. Supports are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to the low-stress drive system across the entire belt width, extended operating times are no problem. Tapered drums and a specially designed belt guiding system ensure maximum running smoothness. Technical data: Frame width (NB): 730 mm Belt width (GuB): 550 mm Installation height (BH): 210 mm Ijdpfx Aaok Ablps Njtb Inner radius (IR): 600 mm Conveying angle: 70° degrees Support legs: optionally available Conveying speed (v m/s): freely adjustable via frequency inverter between 0.032–1.17 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, 0.55 kW / S1 Year of manufacture: 2000 Scope of delivery: Without supports Optionally available: Supports Side guides single- or double-sided Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, please contact us directly. Feel free to reach out via phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2007, Gebhardt roller switch sorter ejector 45° 2400-1300-550 RA1147 Type 356.10 Year of manufacture: 2007 Permissible load: 30 kg/m Dead weight: 40 kg/m Roller width: 550 mm Nominal/outer width (NB): 610 mm Ejector element: Small rollers Set installation height: 680 mm Conveying speed: 0.35 m/sec Brake for accumulation mode on ejector lane Drive for ejector mechanism: Electric Dimensions of conveyed goods: L x W = 600 mm x 400 mm Optional: Customised height adjustments upon request Electrical accessories such as light barriers, barcode sensors Control/software Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Itodpek Aa Ebofx Aa Nob Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Kondisi: bekas, Tahun pembuatan: 2007, Gebhardt Roller Conveyor Diverter Sorter 45° 1900-1800-550 RA1149 Year of manufacture: 2007 Permissible load capacity: 30 kg/m Dead weight: 40 kg/m Roller width: 550 mm Nominal/Outer width (NB): 610 / 1800 mm Conveyor length: 1900 mm Diverting element: roller segments Set construction height: 680 mm Conveying speed: 0.35 m/sec Brake for accumulation operation on discharge conveyor Discharge mechanism drive: electric Goods dimensions: L x W = 600 mm x 400 mm Optional: Custom-adjusted height upon request Electrical add-ons such as photoelectric sensors, barcode readers Control system/software Prices quoted are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For tailored, professional advice, just get in touch with us. Feel free to contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Iedpfxek Aa Eis Aa Netb Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics.

Tahun pembuatan: 1997, Kondisi: bekas, de-fi-01 Iedjur Anrjpfx Aa Netb

Kondisi: bekas, Tahun pembuatan: 2007, Gebhardt roller curve conveyor 2 x 90° left 610-550-300 with straight section RA1210 The Gebhardt roller curve with straight section is from the year 2007 and is in good (used) condition. It is equipped with a central SEW brand motor. Supports are not included in the scope of delivery, but can be provided optionally upon request. Technical Data: Itedpfx Aaok Aa Nbj Nob Manufacturer: Gebhardt Type: 1070.113 Year of manufacture: 2007 Condition: good (used) Motor: fully functional Angle: 2 x 90° with straight section Overall width: 610 mm Clamping length: 550 mm Length of straight section: 300 mm Roller type: G6/50 sliding bearing with tapered plastic molding Load capacity: 30 kg/m Motor type: SEW geared motor Motor power: 0.37 kW/S1 Frequency: 50 Hz, 2 A / 1.15 A Conveying speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (please inquire if required) Optional: supports For individual, professional advice, please do not hesitate to contact us. Simply reach out by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor Left GKF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good (used) condition and is fully functional. It is equipped with a SEW brand geared motor. Support legs are not included in the scope of delivery, but can be optionally supplied upon request. Itodpfx Aok Aa T Hsa Nob Belt curve conveyors are frequently used in intralogistics for the in-house transportation of unit loads and are indispensable in modern distribution centers. Transnorm belt curves are known for their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are no problem. Tapered rollers and a specially developed belt guidance system ensure the highest possible running smoothness. The pictures shown depict the conveyor system in its installed state in a logistics center. Technical Data: Type: Belt Curve Conveyor TS 1600-105 Conveying Length (middle radius, NL): 766 mm Frame Width (NB): 750 mm Belt Width (GuB): 550 mm Overall Height (BH): 210 mm Inner Radius (IR): 700 mm Conveying Angle: 45° Support Legs: optionally available Conveying Speed (V m/s): 0.03–1.05 m/s Drive: SEW Gear Motor SA37 DT80K4/MM05/BW1 Electrical Data: 50Hz v380-500, kW 0.11 / 0.55 / S1 Belt: double-ply, green, smooth Year of Manufacture: 2001 Optional Accessories: Support legs Side guide (one-sided or both sides) Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics.

Kondisi: sangat baik (bekas), jarak tempuh: 673.000 km, daya: 302 kW (410,61 hp), pendaftaran pertama: 03/2008, jenis bahan bakar: diesel, konfigurasi gandar: 8x2, bahan bakar: diesel, warna: merah, tipe perpindahan gigi: otomatis, jumlah gigi: 12, kelas emisi: Euro 5, suspensi: lain, panjang ruang muatan: 6.500 mm, lebar ruang muat: 2.500 mm, Tahun pembuatan: 2008, Perlengkapan: ABS, Bluetooth, derek, kemudi berkuasa, kendali jelajah, kopling trailer, kunci sentral, lampu kabut, pendingin udara, pengaturan jendela elektrik,

Kondisi: bekas, Horizon BT-4055 Sheet Delivery, used The Horizon BT-4055 is a manual, rigid sheet delivery unit designed for use at the end of print production lines. This device is frequently used in combination with folding and stitching machines to collect and stack finished printed products. Iedpfxow Evakj Aa Nstb Key features: - Infinitely adjustable inclination for optimal adaptation to various materials - Robust construction for long-lasting operation - Easy operation without complex mechanisms Technical Specifications: - Maximum sheet size: 400 x 550 mm - Stack height: Depending on adjustment and material All-inclusive service package We take care of everything: from secure packaging and transport to customs clearance. Upon request, we can also provide you with a tailored leasing offer. Sustainable and economical Opt for a used machine and gain twice: Save both the environment and your budget. Despite possible signs of use, you will receive a quality product at an attractive price.

Tahun pembuatan: 2006, Kondisi: baik (bekas), Screw press biji minyak Farmet FS1000, 55 kW, model panjang. Kondisi baik, lengkap, siap untuk dimuat. Kapasitas hingga 1.400 kg/jam. Iodpfsxrc Ixsx Aa Njtb

Kondisi: baik (bekas), Used stainless steel tank on castors Item number: 10555 Quantity: 9 Last application: Paints Volume: 110 litres Type: on 4 castors Material (wetted parts): 1.4301 / AISI 304 Design: Single-walled Opening: 600 mm Tank dimensions: Itjdpfjgzbp Hjx Aa Neb External diameter: 635 mm Cylindrical height: 400 mm Total height: 600 mm Overall width: 725 mm Overall length: 725 mm Materials: Interior: 1.4301 / AISI 304 Exterior parts: 1.4301 / AISI 304

Kondisi: baik (bekas), Used stainless steel vessel on castors Item number: 10556 Previous application: Paints Capacity: 65 litres Type: on 4 castors Wetted material: 1.4301 / AISI 304 Design: single-walled Opening: 400mm Vessel dimensions: Iedpfjgzbqkex Aa Nstb External diameter: 420mm Cylindrical height: 515mm Total height: 655mm Total width: 420mm Total length: 470mm Materials: Inner: 1.4301 / AISI 304 Outer parts: 1.4301 / AISI 304

Kondisi: baik (bekas), Used stainless steel tank / transport container / IBC Item number: 10558 Last application: Unknown Quantity: 11 Volume: 1,000 litres Type: Vertical, in galvanized stackable rack Product-contact material: 1.4301 / AISI304 Manhole: 400 mm Design: Single-walled, heatable Operating pressure acc. to nameplate: 0.6 bar Tank dimensions: Overall width: 1,020 mm Overall length: 1,220 mm Overall height: 1,700 mm Materials: Inside: 1.4301 / AISI 304 Outer parts: Galvanized steel Itodpfxsgzvzde Aa Njb Features: Nameplate: Yes Outlet diameter: 45 mm Outlet valve: Ball valve Heating coil

Kondisi: bekas, jarak tempuh: 780.000 km, daya: 375 kW (509,86 hp), pendaftaran pertama: 09/2012, jenis bahan bakar: diesel, konfigurasi gandar: 3 gandar, rem: retarder, kelas emisi: Euro 5, Tahun pembuatan: 2012, Perlengkapan: pemanas parkir, pendingin udara,

Kondisi: bekas, daya: 41 kW (55,74 hp), Tahun pembuatan: 2022, jam operasional: 799 h, Radlader / wheel loader, Kramer 5055, Model 349, Year of manufacture: 2022, Operating hours: 799, Length: 4950 mm, Width: 1650 mm, Height: 2390 mm, 4x4 all-wheel drive and all-wheel steering, Shovel + forks, Weight: 4,500 kg, Like-new condition, Video available. Isdpfxex R Tzpj Aa Njtb Other information: * We offer more than 200 units for sale. * Our location is 30 km north of Frankfurt/Main Airport. * Financing & leasing available. * Specialist for worldwide transport & shipping. * No liability for typographical or printing errors. * Subject to prior sale and errors. * Trade-in possible! * All sales of vehicles/used machinery are subject exclusively to the general terms and conditions (AGB) of Jaweed GmbH. * Further information and our general terms and conditions can be found on our website.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 53,6 kW (72,88 hp), jenis pendinginan: udara, berat keseluruhan: 701 kg, lebar total: 2.250 mm, panjang total: 1.400 mm, tinggi total: 1.800 mm, masa garansi: 6 bulan, kapasitas pemanasan: 54 kW (73,42 hp), Pending Itjdpfxex Rbt He Aa Njb

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, For sale is a 6-axis loading robot from Erowa, previously used to load two Ingersoll sinker EDM machines with both tools and workpieces. The Ingersoll machines are also for sale and can be offered as a package deal. Technical specifications: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350° A-axis: +/-180° B-axis: +/-90° Y-axis: 1.1–18.74 m Dismantling, loading, and European-wide shipping can be organized for an additional fee. Prices are subject to VAT. Viewing by appointment possible. Contact us—our team will be happy to assist you. Trade-in or swap possible! Machinery purchase / sale BUYING AND SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? Isdpfjtdrkqsx Aa Njtb For further information or to get in touch, please visit our website.

Kondisi: baik (bekas), CNC machining center WEEKE OPTIMAT BHX 500 Itsdpfetd Uufex Aa Neb Including material handling system 'IgeL-ROBOT' Support for machining from below Support for machining from above Workpiece length: min. 250 mm - max. 2,500 mm Workpiece width: min. 70 mm - max. 1,000 mm Workpiece thickness: min. 4 mm – max. 80 mm Workpiece stacking: max. 2 pieces Vector speed: X-axis collet chucks = 138 m/min; Y-axis = 80 m/min; Z-axis = 50 m/min Equipment: VERTICAL DRILLING UNIT 2V 21 HIGH SPEED 7500 HORIZONTAL DRILLING UNIT 2H4X/2Y GROOVE SAW UNIT N2 X-Y 90 MILLING UNIT F2-ETP-6 kW Barcode reader Manufacturer: Datalogic Material loading system 'IGEL-ROBOT'.

Kondisi: bekas, kapasitas tangki: 250 l, EN_GENERAL Equipment: Control cabinet (without guarantee) Construction type: standing Speed: 1420 / 2870 rpm Outer diameter: 830 mm Inner diameter: 640 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 2,000 mm Heating/Cooling: available Insulation: available Power: 2.2 / 2.7 kW Max. permissible operating temperature: 110 °C Max. permissible operating overpressure: 0.5 bar Max. overpressure: 3.0 bar Top cover: Top cover removable / hinged Agitator: Disperser Mounting type: mobile on casters Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Ijdoxqadnepfx Aa Netb Volume: 250 liters Double jacket volume: 90.0 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 620 mm Last application: pharmaceuticals TANK Max. permissible operating temperature: 100 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Outlet: 48 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR 1 Voltage: 380 Volt Agitator mounting: eccentric in top cover