Beli Biesse Rover 22 bekas (330)

Kondisi: sangat baik (bekas), PC control type NC 400, Biesse software No. 2 through-feed motorized conveyor belts Feed speed (m/min): 35 - 75 No. 2 horizontal drilling supports Dowel insertion systems (and glue injection units) No. 5+5 Max. working width (mm): 3200 Min. working width (mm): 235 No. 6 lower vertical drilling supports Drilling units per lower vertical drilling support: 2 x 1.5 kW No. 2 upper vertical workpiece clamps No. 2 screw conveyors (continuous) for chip extraction Ksdpfed Nuwiex Agljwt Total connected load (kW): CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops

Kondisi: sangat baik (bekas), Double-sided FORMAT and EDGE BANDING MACHINE (1st and/or 2nd machine in a production line) Edging material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Safety and noise protection: enclosure Lateral adjustment of aggregates carrier: manual Cam spacing (mm): 500 FORMATTING UNIT (per side): Pre-milling cutter AS 10 (5.8 kW) 2 x Hogging unit DT 10 (5.8 + 5.8 kW) Spraying unit (for liquid release agent) EDGE BANDING UNIT (per side): Kedpfx Agshvahholewt Edging unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-S (0.65 kW x 2) 28 m/min, 0 - 25°, pneumatic Multi-profile routing unit (CNC-controlled) RF 40 (1 kW x 2) 0 - 25° Multifunctional unit (radius and profile trimming) AR 80 (0.65 kW x 2) 25 m/min, ROTAX motors with automatic tool change (tools) 2 universal milling units for grooving/rebating and profiling FB 30 (5 kW x 2) 0 - 90° Multi-profile scraper unit (CNC-controlled) RBK - 503 (2 positions) Flat scraper unit RC 20 Spraying units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)

Kondisi: sangat baik (bekas), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) with automatic high-speed handling system: A) INFEED STATION (portal) "RBO" Model Advantage C 320 Double Station, complete with central motorized roller conveyor. B) ROTATING TRANSFER UNIT (longitudinal/crosswise), with double-cone "RBO" Model GPK-1 C) Double-sided Sizing and Edge Banding Machine "BIESSE" Model Stream SB2 11.0 D) PANEL FLIPPER (180° face-down) "RBO" Model Ribaltatore Kwjdpfx Agjhvah Nslot E) ROTATING TRANSFER UNIT (crosswise/longitudinal), with double-cone "RBO" Model GPK-2 F) OUTFEED STACKING STATION (portal) "RBO" Model Advantage SC 3200 Double Station, complete with central motorized roller conveyor.

Kondisi: sangat baik (bekas), 3-axis (X-Y-Z) CNC MACHINING CENTER Movable table (workpiece), movable working head – Vertical table (workpiece) Control: TPA – Software: Albatros Safety enclosure for working head Workpiece drive with transport chain Rubber rollers to secure workpiece during feed and operation Infeed table (with conveyor belt) – Outfeed table (with conveyor belt) With workpiece return system to operator (180°) Minimum working area (X - Y - Z) mm: 260 x 40 x 10 (approx.) Maximum working area (X - Y - Z) mm: infinite x 1300 x 80 (approx.) Separate electrical and control cabinets Total connected load (kW): 35 WORKING UNITS: Drilling unit with vertical spindles (qty.): 1 Independent vertical drilling spindles (qty.): 24 (7 in X + 17 in Y) Drilling unit with horizontal spindles (qty.): 2 Independent horizontal drilling spindles (qty.): 36 (9+9 = 18 x 2) Kjdpfx Aoihfiisglewt Motor power for drilling head (kW): 3 x 3 (approx.) Vertical main spindle (milling unit) qty.: 1 Power of vertical main spindle (kW): 7.5 (approx.) Automatic tool changer – Carousel magazine, 10 tool positions

Kondisi: sangat baik (bekas), CNC-controlled (automatic) throughfeed drilling line. Also suitable for NARROW PARTS, min. width 100 mm W05024F) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 kW each and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 kW each, each with various drilling heads); - No. 4 upper drilling supports (each with 2 drilling heads, 2.3 kW each, each with various drilling heads); Kwodsu Tp Sljpfx Aglet - No. 6 top vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control – PC DESK TOP (module editor) – Tooling System software W05024G) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, 1.5 kW each and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, 2.3 kW each, each with various drilling heads); - No. 3 upper drilling supports (each with drilling heads, 2.3 kW each, each with various drilling heads); - No. 6 top vertical workpiece clamps - No. 2 continuous screws for chip removal 2nd drilling machine connected to the NC of the 1st machine.

Kondisi: sangat baik (bekas), Mesin dua sisi yang dapat ditempatkan secara in-line setelah Multi Borer tipe melalui untuk siklus proses otomatis pengeboran dan pemasangan dowel. - Programmer Elektronik "CNI" NC 400 - Kabinet kontrol dan listrik built-in - Jarak maksimum antara kepala horizontal sekitar 3200 mm - Sisi kanan mesin dapat digerakkan dan diatur (sesuai lebar panel) - 2 sabuk konveyor bermotor (0,25 HP x 2 motor) - 1+1 tangki penyimpanan dowel untuk pengumpanan otomatis ke nozle Kwsdpfx Ajw Ug A Hoglst - 6+6 nozle pemasukan horizontal (injektor lem dan penekan dowel) - Sistem pengumpanan lem bertekanan tinggi - Total daya terpasang sekitar 5 kW.

Kondisi: sangat baik (bekas), CNC-controlled (automatic) through-feed drilling line, consisting of: W05022F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 horizontal drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and each with 11 drilling spindles); - 6 lower drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 3 upper drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 5 upper vertical workpiece clamps + 2 continuous augers for chip extraction CNC control NC 500 (software: Tooling System + Woodmaster) Kwodpfx Ajt Ig A Ssglot W05022G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 horizontal drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and each with 11 drilling spindles); - 6 lower drilling carriages (each equipped with 2 drilling heads, each 1.8 kW and with various drilling heads per carriage); - 3 upper drilling carriages (each equipped with drilling heads, each 1.8 kW and with various drilling heads per carriage); - 5 upper vertical workpiece clamps - 2 continuous augers for chip extraction 2nd drilling machine connected to the NC of the 1st machine.

Kondisi: sangat baik (bekas), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 motorised throughfeed conveyor belts, feed speed up to 75 m/min - 2 horizontal drilling units (each equipped with 2 drilling heads, each with 1.8 kW motor and 22 drilling spindles) - 5 lower drilling units (each with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip extraction Numerical control system (software module Tooling System) for both machines. W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 motorised throughfeed conveyor belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 8 horizontal units – for gluing and dowel insertion tools) - 3 lower drilling units (each with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) - 1 upper drilling unit (with 2 split and reversible drilling heads, each with 2.3 kW motor and various drilling heads) Kodovnq Txjpfx Aglswt - 3 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip extraction

Kondisi: sangat baik (bekas), PC control type NC 400 No. 2 Pass-through motorized conveyor belts No. 2 Horizontal drilling supports No. 2 Drilling units per each horizontal drilling support Spindles per each horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 5 Lower vertical drilling supports No. 2 Drilling units for each lower vertical drilling support No. 2 Upper vertical drilling supports No. 2 Spindles for each drilling unit of upper drilling supports No. 4 Upper vertical workpiece clamps Chip removal conveyor Digital display of position data (axis) Total connected load (kW): 59.1 Kedsidqd Tspfx Aglswt The CNC control monitors the movement (X-axis) of the horizontal drilling supports. The CNC control monitors the movement (Y-axis) of the stops. The CNC controls the movement (X-axis) of the conveyor belts.

Kondisi: sangat baik (bekas), PC control type NC 400 No. 2 through-feed motorized conveyor belts Ksdpfx Agjidqf Rolswt No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles per drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip removal conveyor belt Digital display of position data (axis) Total connected load (kW): 59.1 The CNC control regulates the movement (X-axis) of the horizontal drilling supports. The CNC control regulates the movement (Y-axis) of the stops. The CNC controls the movement (X-axis) of the transport belts.

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in a line) Edgebanding material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control: PC-based Windows / SINITRA software Feed speed (adjustable) m/min: 10 - 40 (INVERTER CNC) Kodpfxeu Rc Anj Agljwt Cam pitch (mm): 500 FORMATTING UNIT (each side): Protective cutter (pre-milling) AS 10 (5.8 kW) pneumatic 2 x Hogging cutter DT 10 (5.8 + 5.8 kW) Spray unit (for liquid release agent) EDGE BANDING UNIT (each side): 1st Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min, 0 - 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (1 x 2 kW) 0 - 25° Multifunctional unit (radius and contour milling unit) AR 80 (0.65 kW x 2), 25 m/min ROTAX. Revolver changer with 8+8 posts (max. 25 m/min) Motors with automatic tool change (tooling) Multi-profile scraping unit (CNC-controlled) RB 40 (multi-profile) Flat scraping unit RC 20 + spray unit (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2)

Kondisi: sangat baik (bekas), Double-sided - First machine in a machine line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Control system PC Base Windows / PC Software / SINTRA Feed speed (adjustable) m/min 10 - 40 (INVERTER C.N.) FORMAT PROCESSING (for each side): Spray unit (for liquid anti-adhesive) No. 2 Hoggers DT 10 (5.8 kW x 2) Free slot EDGEBANDING SECTION (for each side): 1st Gluing unit (Hot Melt + pre-melter) SP 30 (High Melt + Edge Control EC 40) 2nd Gluing unit (Pre-melter with hot air) Air Force System Edge pressure zone (CNC controlled) + edge magazine for rolls (No. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (2 x 1 kW) 0°-25° Kwedpfou Rc Hyex Aglst No. 1 Universal milling unit for grooving/rabbeting/profiling EB 60 (1 x 5 kW) - ISO 30 motor Multi-profile scraping unit (CNC controlled) RB 40 Flat scraping unit RC 20 Spray units (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Kondisi: sangat baik (bekas), CNC-controlled electronic machine PC control system type NC 500 – Tooling System software No. 2 through-feed motorized conveyor belts – feed speed (m/min) approx. 35 – 75 No. 2 horizontal drilling supports Drilling units per horizontal drilling support (pcs.) 2 x 1.8 HP Max. working width (mm) 3200 – Min. working width (mm) 215 No. 7 lower vertical drilling supports Drilling units per lower vertical drilling support (pcs.) 2 x 1.8 HP Kedpshvi Dujfx Aglewt No. 3 upper vertical drilling supports Spindles per upper drilling support (pcs.) 2 x 1.8 HP No. 5 upper vertical workpiece clamps No. 2 screws (endless) for chip extraction CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Hv) of the 2 horizontal drilling supports CNC controls the movement (X-axis) of the vertical drilling supports CNC controls the movement (axis Y1 and Y2) of the drilling units CNC controls the movement (axis Y) of the stops CNC controls the movement (axis X) of the workpiece clamps CNC controls the movement (axis X) of the conveyor belts The CNC system manages the complete programming of automatic work cycles

Kondisi: sangat baik (bekas), PC control, type NC 400 (with software for managing work cycles) No. 2 motorized throughfeed conveyor belts Max. working width (mm): 3200 - Min. working width (mm): 205 (approx.) No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit: 11 No. 4 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles per drilling unit for upper drilling supports No. 2 upper vertical workpiece clamps No. 2 screws (endless) for chip removal Digital position display (axis) Total connected load (kW): 25 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops Ksdoi D D Tfjpfx Aglewt OPTION: Front loader (for narrow parts: Min 60 mm - Max 260 mm)

Kondisi: sangat baik (bekas), Flexible NC-Automatiklinie zum Bohren, Fräsen und Beschlagsetzen. Numerische Steuerung mit Albatros-Software. Bestehend aus: KZ2046) Einlauf mit Igel-(Puffer-)Speicher (18 Positionen) KZ2047) Übergabe mit motorisiertem Förderband KZ2048) CNC-Modell Vector GLR-X 30-13 KZ2049) Übergabe mit motorisiertem Förderband KZ2050) CNC-Modell Vektor XK 40-13 Kwodpfx Agoidmkrslet KZ2051) Übergabe mit motorisiertem Förderband KZ2052) CNC-Modell Idrak 3 KZ2053) Übergabe mit motorisiertem Teppichförderer, 90°-Umlenkung auf Rollentisch KZ2054) Rollenbahn mit ebenfalls motorisierten Bändern (zum Drehen der Platten um 180° für die Übergabe an die Montagelinien)

Kondisi: bekas, Tahun pembuatan: 2020, Mesin bekas Tahun pembuatan: 2020 Perlengkapan: - Pengendalian unit melalui layar sentuh - Unit milling sambungan - Wadah lem - Unit pemotong Kwedpfxex Enqus Aglet - Unit milling radius - Unit pisau penarik radius - Unit pisau penarik permukaan - Unit pemoles - Penyemprotan depan dan belakang Lokasi: Rheinland-Pfalz Ketersediaan: Sesuai kesepakatan Penjualan atas nama pelanggan. Informasi tanpa jaminan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1000007687, panjang pemakanan sumbu X: 3.000 mm, panjang umpan sumbu Y: 1.000 mm, panjang umpan sumbu Z: 60 mm, lebar total: 4.400 mm, panjang total: 7.290 mm, daya: 20 kW (27,19 hp), kecepatan rotasi (maks.): 18.000 rpm, Deskripsi Singkat Area kerja sumbu X: 3000 mm Area kerja sumbu Y: 1000 mm Daya elektrospindle utama: 3,5 KW Jumlah sumbu terkontrol: 3 sumbu Kwodpfox I A A Rex Agljt CNC untuk pengeboran fleksibel Jenis pekerjaan: Pengeboran, Area kerja sumbu X: 3000 mm Area kerja sumbu Y: 1000 mm Maks. lebar panel yang bisa dilewati: 60 mm Jumlah area kerja: 2 Jumlah sumbu terkontrol: 3 Daya motor: 3,5 kW Kecepatan putar: 18.000 RPM Unit Sistem kontrol: Kontrol PC Perangkat lunak pemrograman mesin: Biesse Works Standar keselamatan: Tanda CE Jaring pelindung terpasang pada mesin Sistem keselamatan: Mat keselamatan depan Total daya terpasang: 20 KW

Kondisi: bekas, nomor mesin/kendaraan: 008030, Tipe tepi yang terpasang: tepi tipis, tepi tebal, kayu solid Sistem lem: EVA, PUR, udara panas Pengefraisan join: ya Ksdowvq Hgjpfx Agljwt Unit multifungsi: ya Kecepatan umpan maksimum: 25 m/menit Ketebalan papan maksimum: 60 mm Unit kerja: 8 unit

Kondisi: bekas, nomor mesin/kendaraan: 007848, Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA, hot air Jointing cutter: yes Multi-function unit: yes Maximum feed speed: 20 m/min Maximum panel thickness: 60 mm Working units: 8 units Kedowkrqpspfx Agljwt

Kondisi: bekas, nomor mesin/kendaraan: 007869, max-breite-des-paneels-3200-mm Kjdewimzyjpfx Aglswt

Kondisi: bekas, nomor mesin/kendaraan: 008027, Lebar maks. yang dapat diproses: 1350 mm Ketebalan min. yang dapat diproses: 200 mm Meja kerja: tinggi tetap Kodpewvq E Ajfx Agljwt Karpet vakum: ya Jumlah unit kerja: 4 unit

Kondisi: bekas, nomor mesin/kendaraan: 007641, Type of applied edge: thin edge, thick edge, solid wood Kwsdpfx Aswuz R Heglet Adhesive system: EVA, PUR Edgebanding machine: Machine 1 Max. panel width: 1200 mm Working units, right side: 8 units Working units, left side: 9 units

Kondisi: bekas, nomor mesin/kendaraan: 007913, typ-der-angebrachten-kante Ksdpfxewkf Dve Agljwt

Kondisi: bekas, nomor mesin/kendaraan: 007870, max-breite-panel-3200-laenge-panel-800-an-aggregate-2-injektoren -12 Kjdowimz Hjpfx Agljwt

Kondisi: bekas, nomor mesin/kendaraan: 006370, Type of attached edge: thin edge, thick edge Adhesive system: EVA Jointing milling: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Kwsdpfx Ael Txw Hegljt Working units: 12 pcs