Beli Biesse Skill 1536 G Ft bekas (323)

Kondisi: sangat baik (bekas), Panel dividing saw angular system Control: OSI Plus with Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st Push feed saw with 5 grippers 90° turning device for panels 1st panel dividing saw, max. cutting width (mm): 4500 Rjdpfx Aleukhd Ajajt Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd Push feed saw with 10 grippers 2nd panel dividing saw, max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air-cushion tables (mm: 2200 x 1500) Automatic outfeed bridge for cut panels “RBO (BIESSE)” model Lifter with 6 stacking positions

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 24 V, frekuensi input: 50 Hz, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 12 m/menit, Perlengkapan: Penandaan CE, dokumentasi / manual, Mesin sedang beroperasi dalam produksi dan akan tersedia pada akhir Mei. Berfungsi penuh dalam kondisi baik. Rjdpfx Asyz Sbijlajt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, de-Biesse Akron 1330 A Kantenanleimmaschine Einseitige Kantenanleimmaschine AKRON 1330-A Leimauftragseinheit SP03 Kappenaggregat IT03 Feinfräsaggregat RF02 Eckenrundungsaggregat AR02 Vorfräsaggregat RT02 mit symmetrischen Diamantwerkzeugen H=45 mm Z=2+2 30° inklusive. Kantenzieher RB02 (Werkzeuge nicht enthalten). Leimfugenzieher RC02 Bürsteinheit SZ02 Zusätzliche seitliche Plattenauflage Set zur Installation des Plattenrückführsystems Manuelle Zuführung für schmale Werkstücke Satz zum Bearbeiten von „Shadow Line“-Profilplatten Geradliniger Lufttisch am Maschineneinlauf Antihaftmittel-Einheit ADZ02 Paar diamantbeschichtete Fräser H=65 mm Z=2+2 30°, als Ersatz für Standardwerkzeuge. Hybrid-Leimtopf für EVA/PUR-Granulatleim anstelle des Standardsystems TM15 Hybrid-Vorschmelzgerät für EVA/PUR-Leim Adaptive Infrarotlampe AdIRL-700 AX-4, NC-Achse am Feinfräsaggregat PRO-NESTING-KIT für Feinfräsaggregat Paar Multifunktionsfräser für Feinfräsaggregat: Fase 25°, R=2 mm + R=1 mm, gerade für Massivholz AX-2, NC-Achse am Eckenrundungsaggregat Nur Rundungsfunktion Schiebeeinheit für Eckenrundungsaggregat Rodpfxoyyb Ice Alaot Paar Fräser R=2 mm für Eckenrundungsaggregat Paar Fräser R=1 mm für Eckenrundungsaggregat AX-4, NC-Achse am Kantenzieher PRO-NESTING-KIT für Kantenzieher Paar Messer R=2 mm für Kantenzieher Paar Messer R=1 mm für Kantenzieher Reinigungseinheit LPT02 (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Preise exkl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden/Holland De beste gebruikte machines uit Nederland

Kondisi: sangat baik (bekas), Spalt- und Nutmaschine (gebraucht zum Nuten und/oder zum Teilen eines einzigen Paneels in zwei Teile) - Mindestlänge des Werkstücks: ca. 250 mm - Maximale Länge des Werkstücks: ca. 2.700 mm - Mindestbreite des Werkstücks: ca. 124 mm - Maximale Breite des Werkstücks: ca. 1.200 mm - Werkstückdicke (min./max.): ca. 10 / 60 mm - Max. Vorschubgeschwindigkeit: ca. 50 m/min - Gesamtinstallierte Leistung: 82 kW Ausgestattet mit folgenden Aggregaten: POS. 1 Untere Ritzsägeeinheit (Rotax-Elektrospindel 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 2 Obere Ritzsägeeinheit (Rotax-Elektrospindel 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 3 Untere Ritzsägeeinheit (Rotax-Elektrospindel 5 kW), max. Sägeblattdurchmesser ca. 250 mm POS. 4 Obere Ritzsägeeinheit (Rotax-Elektrospindel 5 kW), max. Sägeblattdurchmesser ca. 250 mm Rjdpjyx S N Usfx Alaet POS. 5 Untere Haupteinheit (Säge) (Rotax-Elektrospindel 11 kW), max. Durchmesser ca. 450 mm POS. 6 Obere Haupteinheit (Säge) (Rotax-Elektrospindel 11 kW), max. Durchmesser ca. 450 mm OPTIONAL: Schall- und Sicherheitskabine

Kondisi: bekas, nomor mesin/kendaraan: 008338, arbeitsdaten_001 Redpfx Aljx A Tkxjaot

Kondisi: bekas, nomor mesin/kendaraan: 007645, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Joint trimming: yes Multi-function unit: yes Top trimming unit: yes Rsdpfowuz Nijx Alast Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 9 units

Kondisi: bekas, nomor mesin/kendaraan: 008184, main-specs-5axis-cnc Rodpfxeyxmv Nj Alajt

Kondisi: baik (bekas), Tahun pembuatan: 2017, Atas nama klien, kami menawarkan untuk dijual mesin Biesse berusia sekitar 10 tahun dalam kondisi baik. Investasi yang cocok untuk memulai produksi baru dengan anggaran terbatas. Redpeywup Usfx Alajt

Kondisi: bekas, nomor mesin/kendaraan: 008377, Arbeitsbereich Achse X: 3390 mm Arbeitsbereich Achse Y: 1570 mm Arbeitsebene: Mit Vakuum-Konsolenauflagen Leistung Haupt-Spindel: 13 KW Anz. kontrollierte Achsen: 4 Achsen Rsdpfxox Swb Ao Alast Anzahl Bohrspindeln: 32 Anzahl Werkzeugplätze: 10

Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 5.900 mm, jarak lintasan sumbu Y: 1.560 mm, kecepatan pemakanan sumbu X: 80 m/menit, laju pemakanan gandar Y: 60 m/menit, kecepatan rotasi (maks.): 20.000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis working range: 5,900 mm Y-axis working range: 1,560 mm X-axis traverse speed: 80 m/min Y-axis traverse speed: 60 m/min Z-axis traverse speed: 25 m/min Drilling spindles Vertical drilling spindles: 20 Horizontal drilling spindles (X-direction): 6 Horizontal drilling spindles (Y-direction): 2 Total number of vertical and horizontal spindles: 28 Milling spindles Number of controlled axes: 4 Motor power: 10 kW Speed: 20,000 rpm Tool magazine Number of positions: 10 Tool: positioned on the head MACHINE DETAILS Total installed power: 24 kW Control system: WINDOWS Machine programming software: WRT Rsdpfxeyxm Swe Alajt EQUIPMENT Worktable with suction pads Number of rails with suction pads: 10 Vacuum pads for securing the workpiece Vacuum pump The machine is sold and delivered in its current technical and legal condition (‘as seen and approved’), based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8173

Kondisi: belum diuji (bekas), Tahun pembuatan: 2016, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 22 mm, kecepatan rotasi (maks.): 12.000 rpm, Perlengkapan: Penandaan CE, The machine has the following configuration: Pre-milling unit Automatic, time-controlled intervention and positioning via NC Lamps for preheating the panel edge Edge tape magazine Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and bottom flush trimming unit RS-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Finishing and corner rounding unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner rounding unit AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Automatic, time-controlled intervention Cut-off saw RB02 Positioning via NC Redpoyxndbjfx Alaot Glue scraper unit RCC-701 Polishing unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber belt Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 7673

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Ferwood Code: RU0006888 - Manufacturer Code: C0151A07 - Condition: Used - Functionality: Fully operational - Weight: 25 KG - Dimensions: 70 x 46 x 34 cm - If interested, we offer an overhaul service: please contact us. Rodpfx Aou H H Erelajt

Kondisi: bekas, nomor mesin/kendaraan: 007871, Max. panel width: 1200 mm Rsdpfx Alswimzmsajt Max. panel length: 3200 mm Max. panel stack height above floor: 1600 mm Movement system: with suction elements

Kondisi: bekas, nomor mesin/kendaraan: 008359, arbeitsbereich_achse_2500mm Redpfxjx Swcaj Alaet

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, nomor mesin/kendaraan: 1000017221, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 900 mm, jarak gerak sumbu Z: 60 mm, model controller: BSuite3, jumlah spindel: 17, DETAIL TEKNIS Area kerja Sumbu X: 2.500 mm Area kerja Sumbu Y: 900 mm Area kerja Sumbu Z: 60 mm Jumlah sumbu: 3 Perkakas: ISO 30 Spindel Jumlah spindel keseluruhan: 17 Rodpfxoyzpcdj Alast 6 vertikal pada sumbu X 5 vertikal pada sumbu Y 4 horizontal pada sumbu X 2 horizontal pada sumbu Y DETAIL MESIN Kontrol numerik: Perangkat Lunak BSolid - BSuite3 PERLENGKAPAN Perangkat pemuat otomatis Pisau terintegrasi untuk pembuatan alur Sistem pelindung dan keamanan depan dengan alas Pagar pelindung perimeter Referensi eksternal: MME002

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in a production line) Edge material (rolls) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Working width (min/max) mm: 240 – 2700 Control / Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 Cam spacing (mm): 500 FORMATTING UNIT (per side): Rsdpfx Aoywk Elelaet - Protection milling cutter (pre-milling) AS 10 (1 x approx. 5.2 kW) - 2 x Hogger heads DT 10 (2 x approx. 5.8 kW) - Spray unit for liquid anti-adhesive EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue + premelter) SP30 (High Melt + Edge Control EC40) - Edge pressure zone (CNC-controlled). Edge magazine for coils (No. 6 positions) - End trimming unit IT 90-S (2 x approx. 0.3 kW) 28 m/min (0° - 25°) - Pre-milling unit RS 10 (2 x 0.75 kW) - Multi-profile milling unit (CNC-controlled) RF 30 (2 x 0.37 kW) 0°–25° - Multifunctional unit (radius milling and contour milling) AR 30 (2 x 0.35 kW) - Left: 2 x Universal milling units for grooving/rebating and profiling FB 32 (2 x approx. 5 kW) 0°–90° - Right: Universal milling unit for grooving/rebating and profiling FB 30 (1 x approx. 5 kW) 0°–90° - Profile scraper unit RB 10 - Flat scraper unit RC 10 – spray aggregate (for polishing liquid) - Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) - Hot air blower – edge trimmer PH 10 OPTION: D.O.M. stacker with carrier column and mobile jib (with vacuum suction cups) for unloading and stacking edge-processed panels.

Kondisi: bekas, nomor mesin/kendaraan: 007913, typ-der-angebrachten-kante Rodpfx Alewkf Dvjast

Kondisi: bekas, nomor mesin/kendaraan: 008414, de-01 Redpjywafhjfx Alaet

Kondisi: bekas, nomor mesin/kendaraan: 007848, Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA, hot air Jointing cutter: yes Multi-function unit: yes Maximum feed speed: 20 m/min Maximum panel thickness: 60 mm Redpfx Alewkrqpeaet Working units: 8 units

Kondisi: bekas, nomor mesin/kendaraan: 008383, typ_der_angebracht_kante_2024-06-22_001 Redpfxex Swcgo Alaet

Kondisi: bekas, nomor mesin/kendaraan: 008113, #de-machine-data-001 Rsdjw Iddhopfx Alast

Kondisi: bekas, nomor mesin/kendaraan: 005062, Type of attached edging: thin edge, thick edge Glue system: EVA Jointing milling: yes Multi-function unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Work units: 8 pcs Rsdpfx Alsybawdoast

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Travel Paths: • X-axis: 6170 mm • Y-axis: 1395 mm • Z-axis: 180 mm Machine Construction: • Gantry design with movable machining unit • 10 consoles (ATS) with adjustable vacuum supports • 30 movable support elements • Multi-zone vacuum system (4 work areas along X-axis) Installation Dimensions: • Machine length: approx. 8850 mm • Machine width: approx. 4020 mm • Working length: approx. 7300 mm Clamping and Vacuum System: • 2 vacuum pumps, each with 90 m³/h capacity • Vacuum pods in various sizes (360° rotatable) • Pneumatic clamping systems: • Front stops • Side stops (left/right) • Central stops • Uniclamp clamping units for workpiece thicknesses 40–98 mm • Sensors for detecting retracted stops Machining Units Main Spindle: • Power: 7.5 kW to 12 kW • Speed: up to 24,000 rpm • Tool holder: HSK F63 Drilling Head: • Vertical spindles: • 10 in X-direction • 10 in Y-direction • Horizontal spindles: • 6 in X • 2 in Y Additional Parameters: • Max. drilling diameter: 35 mm • Usable length: 45 mm • Max. overhang: 60 mm Tool Changer System Turret Tool Changer: • Capacity: 18 tools • Holder: ISO30 / HSK F63 • Max. tool diameter: 200 mm • Max. tool length: 160 mm Additional Features: • Pick-up changer with 2 slots • Capability for aggregates (e.g., saw units up to Ø 270 mm) Electrical: • Connection: 400 V / 50 Hz / 3-phase • Power: 22 kW Compressed Air: • Connection: 3/8" • Operating pressure: 6 bar • Consumption: approx. 400 NL/min Extraction: • Connection diameter: 250 mm Redpfjyvz Emsx Alaet • Air requirement: 5300 m³/h • Air velocity: 30 m/s • Pressure loss: 1500 Pa Mechanical Data • Machine weight: approx. 4750 kg Additional Equipment • Automatic central lubrication • Chip conveyor • Air blast device for spindle • Pneumatic pre-installation system • Safety equipment according to Directive 98/37/EC • CNC control (Biesse system)

Kondisi: sangat baik (bekas), de2hu-001 Rjdoyvrrqopfx Alaot

Kondisi: baik (bekas), de Redoxqntdspfx Alaot