Beli Broderson Ic 80 bekas (127.227)

Kondisi: baik (bekas), de-hu-machine Dcsdpfxexwkq Ej Aarjr

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2015, kapasitas angkut: 8.000 kg, Perlengkapan: Penandaan CE, kabin, pencahayaan, sistem pelumasan terpusat, Forklift Listrik STILL RX60-80 Dcedpfx Aexnp Abjarer Tahun pembuatan: 2015 Kapasitas angkat/beban: 8000 kg Tinggi angkat maksimum: 5900 mm Tegangan baterai: 80 V Kapasitas baterai: 1360 Ah / C5 Konsumsi energi per siklus kerja VDI/jam: 17,7 kWh/h Tekanan kerja untuk attachment: 250 bar Berat total dengan baterai sekitar 14.300 kg

Kondisi: bekas, Derek rantai listrik DEMAG Tipe PM 8 - Manulift No. seri: 5319450 Tahun pembuatan: 1979 Kapasitas angkat: 80 kg Panjang perjalanan kait: 2,9 meter Jarak gantungan ke kait beban: 700 mm Kecepatan angkat utama: 12 m/menit Kecepatan angkat halus: 2 m/menit 1 tali beban = 80 kg Dedpfxexcbnlj Aarjcr Kontrol manual Manulift langsung di kait crane Sambungan listrik: 380 Volt, 50 Hz Berat: 20 kg Dalam kondisi baik

Kondisi: baik (bekas), Pressing force: 200 tons Table: 1500x1000 mm Motor: 45 kW Weight: 18,000 kg Djdpfxogvz Hxj Aarjcr Upright spacing: 1500 mm Dimensions: Machine: 5500x2610x2150 mm

Kondisi: bekas, de Dsdsxxyh Aepfx Aarjcr

Kondisi: baik (bekas), Tahun pembuatan: 2008, The following item is for sale: 1 unit Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive unit rated power: 16.8 kW Dcodpfx Aaoxr A Dtorer Rated torque: 100 Nm Spindle speed: 1000 - 7000 rpm Travel speed Z-axis: max. 30 m/min Travel speed X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation is available. Note! The system may require some reprogramming, as it was previously part of an integrated production line. However, a standalone program is available.

Kondisi: baik (bekas), hu-trans-001 Dodsxwkn Ropfx Aarjcr

Kondisi: bekas, Technical details: Sheet width: 1000 mm Sheet thickness: 3.0 mm Minimum sheet thickness: 0.5 mm Frame opening: 920 mm Number of straightening rollers: 4 top / 4 bottom Roller diameter: approx. 75 mm Number of feed rollers: 2 top / 2 bottom Machine weight approx.: 6.5 t Dimensions (L x W x H): 3.8 x 2.2 x 2.1 m This is a sheet metal levelling machine with hydraulic feed. Further features: 4 straightening upper rollers, Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening lower rollers, Ø 75 x 830 mm, fixed, hydraulic 4 extraction rollers, Ø 110 x 480 mm, 2 top adjustable by approx. 20 mm and 2 bottom, hydraulic Roller support Entry height 1400 mm Equipped with hydraulic system Operation via external control panel Dcjdovgbgaspfx Aaror Recommendation: For sale as a complete coil line (decoiler + loading device + levelling machine with hydraulic feed), optionally together with stock no. 0100572.

Kondisi: bekas, Tahun pembuatan: 1989, druck_080t_presse Dsdpfx Aaovuuavjrocr

Kondisi: bekas, Tahun pembuatan: 1998, Pressure: 80 t Throat depth: 335 mm Stroke: 8 – 100 mm Stroke rate: 60/90 strokes/min Table surface: 900 x 670 mm Passage opening in table: 280 x 200 mm Max. installation height: 450 mm Ram adjustment: 80 mm Ram surface: 700 x 450 mm Max. tool dimensions: 700 x 450 mm Max. tool weight: 140 kg Total power requirement: 11.07 kW Machine weight approx.: 6.5 t Space requirements (WxLxH): approx. 1.72 x 2.0 x 2.82 m Equipment: - Pinion gears - Hydraulic clutch - Large ram - Pneumatic ram counterbalance with air tank on right side of frame - Oil lubrication, make: Vogel - Semi-automatic stroke adjustment - Hydraulic ball screw adjustment with manual clamping - Mechanical overload protection (shear plate) - Ram adjustment with Siko counter - Table clamping plate - Monitored ram top hold device - Control cabinet mounted on console on right machine frame - Foot switch - 1 set of vibration isolation elements - Operating manual / EC Declaration of Conformity Dcedpfxouild Ae Aarjr The machine will receive a thorough technical inspection at our facility and comes with a current press inspection, as well as: - Oil change - Filter change - Replacement of hoses

Kondisi: baru, de-hu-001 Dcodpfx Ajw U U Svoarer

Kondisi: baik (bekas), Tahun pembuatan: 2004, For sale are 2 units of Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive unit rated power: 16.8 kW Rated torque: 100 Nm Speed range: 1,000 – 7,000 rpm Traversing speed Z-axis: max. 30 m/min Traversing speed X-axis: max. 30 m/min Dcodpfxjxr A Dgs Aarer Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9,000 kg Complete documentation available. Attention! The system will likely require partial reprogramming, as it previously formed part of a complete production line. However, a standalone program is available.

Kondisi: bekas, Tahun pembuatan: 2003, Technical Details: Maximum wheel diameter: 80 mm Maximum module: 3 Total power requirement: 25–35 kW Machine weight approx.: 10 t Workpiece weight: 15 kg Dedpswwlunjfx Aarscr Maximum workpiece length: -50 to +450 mm Table diameter: 145 mm Cutter diameter: 90 mm Maximum cutter length: 220 mm Cutter spindle speed: 1,000 rpm

Kondisi: baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, lebar perataan: 800 mm, jenis penyesuaian ketinggian: listrik, berat keseluruhan: 1.600 kg, tinggi penyerutan: 200 mm, jumlah mata pisau planer: 4, Perlengkapan: rem mesin, Year of manufacture: 1994 Planing width: 800 mm Max. planing height: 200 mm Number of knives: 4 Min. workpiece length: 500 mm Min. planing height: 5 mm Speed: 4,500 rpm Table length: 1,100 mm Number of outfeed rollers: 1 Main motor: 11 kW Max. feed speed: 32 m/min Stepless feed adjustment: Yes Table rollers: Yes Digital thickness display: Yes Dcodpfxowma N Sj Aarjr Segmented pressure roller: Yes Electric height adjustment: Yes Cutterblock: Centrifugal block Centrifugal block type: Tersa Outfeed: Steel roller Total connected load: 16 kW Weight approx.: 1,600 kg Required floor space (L): 1.2 m Required floor space (W): 1.65 m Required floor space (H): 1.8 m

Kondisi: bekas, Tahun pembuatan: 1977, de2hu2it2lt_001 Dsdpfx Ajvut Npjarscr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Engel Victory 330/80 Phoenix Gaya penjepit: 80 ton Dsdpfexq Ti Rex Aarocr Tahun pembuatan: 2004 Diameter sekrup: 40 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, specs_de_en Dcjdpsw Ec A Eefx Aarer

Kondisi: baik (bekas), Tahun pembuatan: 2012, Matec 30 L, Year of manufacture: 2012, Heidenhain iTNC 530 CNC control, Travel ranges X/Y/Z: 1300/600/700 mm, Spindle speed up to 12,000 rpm, HSK 63 - A tool holder, electronic handwheel, through-spindle coolant supply 20 bar, Dedpfxow Uf Izj Aarscr paper band filter, 80-position tool changer, fully enclosed work area, direct measuring systems, swarf conveyor, bellows with steel lamellae, 3D measuring probe, laser measuring system,

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 8.000 kg, tinggi angkat: 4.490 mm, panjang garpu: 1.800 mm, panjang total: 5.310 mm, - Operation: Sit-down unit - Load capacity: 8000 kg - Load center distance: 900 mm - Axle load with load front/rear (kg): 21,306 / 2,124 - Axle load without load front/rear (kg): 7,097 / 8,333 Dedpfxexd Hlle Aarecr - Track width front/rear (mm): 1,561 / 1,432 - Mast/fork carriage tilt forward/backward α/β (°): 5 / 8 - Height of mast retracted: 2,710 mm - Coupling height (mm): 520 / 670 - Fork carriage ISO 2328, class/type A, B: ISO IV A - Aisle width with 1000 x 1200 mm pallet crosswise (mm): 4,999 - Aisle width with 800 x 1200 mm pallet lengthwise (mm): 5,199 - Turning radius (mm): 3,049 - Minimum pivot point distance (mm): 877 - Travel speed with/without load (km/h): 14 / 17 // 18 / 20 4 - Lifting speed with/without load (m/s): 0.28 / 0.37 // 0.36 / 0.48 - Lowering speed with/without load (m/s): 0.53 / 0.42 - Drawbar pull with/without load (N): 27,997 / 28,295 - Max. drawbar pull with/without load (N): 44,000 - Gradeability with/without load (%): 15.5 / 22.5 - Max. gradeability with/without load (%): 16.0 / 23.0 - Acceleration time (15 m) with/without load (s): 7.9 / 6.8 // 6.9 / 6.1 - Service brake: Mechanical/hydraulic - Battery according to DIN 43531/35/36 A, B, C, no: DIN 43536 A - Battery voltage (V): 80 - Battery capacity K5 (Ah): 1,120 (-1,240) // 1,085 - Energy consumption per VDI work cycle/hour (kWh/h): 17.7 - Handling performance (t/h): 456 // 476 - Energy consumption at handling performance (kWh/h): 17.2 // 21.9 - Hydraulic pressure for attachment (bar): 250 - Oil flow for attachments (l/min): 60 - Sound pressure level LpAZ (operator’s position) 2 (dB(A))

Kondisi: sangat baik (bekas), Drawer cabinet with three telescopic drawers and doors Width: 550 mm Depth: 660 mm Height: 710 mm Drawer heights: 1 drawer: 50 mm internal height Dcsdpfx Asit I Rhjarer 1 drawer: 80 mm internal height 1 drawer: 110 mm internal height 1 pull-out

Kondisi: bekas, Tahun pembuatan: 1977, maschinenbeschreibung-press-080t-uvv Dodpfx Aovut E Rjarscr

Kondisi: bekas, Tahun pembuatan: 2023, kapasitas angkut: 8.000 kg, tinggi angkat: 4.500 mm, panjang garpu: 1.800 mm, panjang total: 5.360 mm, - Operation: Sit-down unit - Load capacity: 8000 kg - Load center distance: 900 mm - Axle load with load front/rear (kg): 21,306 / 2,124 - Axle load without load front/rear (kg): 7,097 / 8,333 - Track width front/rear (mm): 1,561 / 1,432 - Mast/fork carriage tilt forward/backward α/β (°): 5 / 8 - Height of mast retracted: 2,710 mm - Coupling height (mm): 520 / 670 - Fork carriage ISO 2328, class/type A, B: ISO IV A - Aisle width with 1000 x 1200 mm pallet crosswise (mm): 4,999 - Aisle width with 800 x 1200 mm pallet lengthwise (mm): 5,199 - Turning radius (mm): 3,049 Dcodpfxoxd Hf Ee Aarsr - Minimum pivot point distance (mm): 877 - Travel speed with/without load (km/h): 14 / 17 // 18 / 20 4 - Lifting speed with/without load (m/s): 0.28 / 0.37 // 0.36 / 0.48 - Lowering speed with/without load (m/s): 0.53 / 0.42 - Drawbar pull with/without load (N): 27,997 / 28,295 - Max. drawbar pull with/without load (N): 44,000 - Gradeability with/without load (%): 15.5 / 22.5 - Max. gradeability with/without load (%): 16.0 / 23.0 - Acceleration time (15 m) with/without load (s): 7.9 / 6.8 // 6.9 / 6.1 - Service brake: Mechanical/hydraulic - Battery according to DIN 43531/35/36 A, B, C, no: DIN 43536 A - Battery voltage (V): 80 - Battery capacity K5 (Ah): 1,120 (-1,240) // 1,085 - Energy consumption per VDI work cycle/hour (kWh/h): 17.7 - Handling performance (t/h): 456 // 476 - Energy consumption at handling performance (kWh/h): 17.2 // 21.9 - Hydraulic pressure for attachment (bar): 250 - Oil flow for attachments (l/min): 60 - Sound pressure level LpAZ (operator’s position) 2 (dB(A))

Kondisi: bekas, Tahun pembuatan: 2021, kapasitas angkut: 8.000 kg, tinggi angkat: 4.215 mm, panjang total: 6.550 mm, • Load center distance: 900 mm • Seat height, EGO cabin: 1,440 mm • Load distance: 760 mm • Track width (c-c), front – rear: 1,500 – 1,360 mm • Turning radius, outer: 3,700 mm • Turning radius, inner: 300 mm • Height with cab tilt, max. EGO cabin: 3,020 mm • Width with cab tilt, max. EGO cabin: 3,225 mm • Minimum aisle width for 90° stacking: 6,450 mm • Lift height: 3,500 mm • Mast tilt, forward – backward α – β: 6-9 degrees • Axle load front, unladen: 5,500 kg • Axle load front, with rated load: 18,400 kg • Axle load rear, unladen: 6,200 kg • Axle load rear, with rated load: 1,300 kg • Brake dimensions, front – rear: 8.25-R15 – 8.25-R15 • Tire pressure, front – rear: 1.0 – 1.0 MPa Dsdpexd Hfrefx Aarecr • Steering system type – control: hydraulic servo, steering wheel • Service brake type – braked wheels: oil-cooled disc brakes – drive wheels • Parking brake type – braked wheels: dry spring-applied disc brake – drive wheels • Hydraulic pressure, max.: 20 MPa • Hydraulic oil volume: 155 l • Drive axle – type: differential and hub reduction • Drive motor, hourly rating: 2 x 11 kW • Speed control, principle – steps: high-frequency MOSFET, AC – stepless • Hydraulic pump motor, duty cycle – load ratio: 1 x 42 kW – S3 15% • Brake pump motor, duty cycle – load ratio: 1 x 4.2 kW – S3 15% • Pump monitoring, principle – step: high-frequency MOSFET, AC – stepless • Lifting speed unloaded: 0.32 m/s • with rated load: 0.31 m/s • Lowering speed unloaded: 0.45 m/s • with rated load: 0.50 m/s • Travel speed, F/R unloaded: 15 km/h • with rated load: 13 km/h • Gradeability, max. unloaded: 37% • with rated load: 21% • Gradeability at 2 km/h, unloaded: 29% • with rated load: 16% • Tractive force: 40 kN

Kondisi: baru, Tahun pembuatan: 2023, kapasitas angkut: 8.000 kg, tinggi angkat: 4.500 mm, panjang garpu: 1.800 mm, panjang total: 5.360 mm, - Operation: Sit-down unit - Load capacity: 8000 kg - Load center distance: 900 mm - Axle load with load front/rear (kg): 21,306 / 2,124 - Axle load without load front/rear (kg): 7,097 / 8,333 - Track width front/rear (mm): 1,561 / 1,432 - Mast/fork carriage tilt forward/backward α/β (°): 5 / 8 - Height of mast retracted: 2,710 mm - Coupling height (mm): 520 / 670 - Fork carriage ISO 2328, class/type A, B: ISO IV A - Aisle width with 1000 x 1200 mm pallet crosswise (mm): 4,999 - Aisle width with 800 x 1200 mm pallet lengthwise (mm): 5,199 - Turning radius (mm): 3,049 - Minimum pivot point distance (mm): 877 - Travel speed with/without load (km/h): 14 / 17 // 18 / 20 4 - Lifting speed with/without load (m/s): 0.28 / 0.37 // 0.36 / 0.48 - Lowering speed with/without load (m/s): 0.53 / 0.42 - Drawbar pull with/without load (N): 27,997 / 28,295 - Max. drawbar pull with/without load (N): 44,000 Dedpexd E Ewofx Aarscr - Gradeability with/without load (%): 15.5 / 22.5 - Max. gradeability with/without load (%): 16.0 / 23.0 - Acceleration time (15 m) with/without load (s): 7.9 / 6.8 // 6.9 / 6.1 - Service brake: Mechanical/hydraulic - Battery according to DIN 43531/35/36 A, B, C, no: DIN 43536 A - Battery voltage (V): 80 - Battery capacity K5 (Ah): 1,120 (-1,240) // 1,085 - Energy consumption per VDI work cycle/hour (kWh/h): 17.7 - Handling performance (t/h): 456 // 476 - Energy consumption at handling performance (kWh/h): 17.2 // 21.9 - Hydraulic pressure for attachment (bar): 250 - Oil flow for attachments (l/min): 60 - Sound pressure level LpAZ (operator’s position) 2 (dB(A))

Kondisi: bekas, Tahun pembuatan: 2016, kapasitas angkut: 8.000 kg, tinggi angkat: 3.130 mm, panjang total: 4.940 mm, Electric forklift Dedpexd E Acefx Aarscr Linde E 80-01/900 Drive: Electric Year of manufacture: 2016 Lifting height (mm): 3,130 Load capacity (kg): 8,000