Beli Chuck Magnetik bekas (4.591)

Kondisi: baru, Condition: new Delivery time: approximately 2–4 weeks from order Country of origin: Poland Price: €2,595 Drilling capacity in steel: 12 mm Tool holder: 19 mm Weldon Motor power: 0.4 kW Length: 361 mm Width: 238 mm Height: 352 mm Weight: 14.5 kg Maximum drilling capacity: 12 mm Maximum annular cutter capacity: 36 mm Maximum cutting depth: 50 mm Stroke: 70 mm Motor speed: 260 rpm Minimum workpiece thickness: 6 mm This special battery-powered magnetic drill with a permanent magnet base is designed for use in remote areas where no power supply is available. The base contains very strong neodymium magnets and does not require electricity to operate. The PRO-36 PM Battery is equipped with an LED monitoring system that provides green and red signals to indicate the drill's current status and issue safety warnings. The drill can be used on convex (minimum diameter: 80 mm) and concave (minimum diameter: 1,000 mm) materials. Up to 47 holes with a diameter of 20 mm can be drilled in 10 mm steel plates when the PRO-36 PM Battery is equipped with the CAS LiHD 10.0 Ah battery pack. Features and advantages: • LED monitoring system flashes green when insufficient adhesion is detected, e.g., due to a gap or thin workpieces • Dual guide system ensures exceptional precision and maintenance-free operation • Overload protection • Tilt sensor stops the motor if the machine detaches unexpectedly • Control panel features so-called vandal-proof illuminated start/stop switches for the motor Standard delivery package: • Cordless magnetic drill with cooling system • Plastic carry case • 4.0 Ah battery • Handle (3 pieces) • Safety belt • 4 mm Allen key with handle • Operating manual OPTIONS (prices on request): Charger Pressure cooling system Klodpfx Agjyrhtns Rsp Vacuum pad Vacuum pump Compressed air ejector

Kondisi: baru, Condition: new Delivery time: approx. 2-4 weeks from order Country of origin: Poland Price: €1,995 Drilling capacity in structural steel: 25 mm Tool holder: 19 mm Weldon Motor power: 1.6 kW Klodpfxjyrhrwe Ag Rop Thread cutting capacity: M20 Length: 266 mm Width: 259 mm Height: 505 mm Weight: 18 kg Max. drilling capacity: 25 mm Max. annular cutter capacity: 70 mm Max. cutting depth: 75 mm Stroke: 190 mm Motor speed: 120-190 / 290-450 rpm Min. workpiece thickness: 8 mm The PRO-72T drilling machine is suitable for drilling and thread cutting. The powerful motor with variable speed enables milling up to 70 mm (2-3/4") and drilling up to 25 mm (1"). Thanks to clockwise and counterclockwise rotation, the machine can cut threads up to M20 using Promotech’s new thread cutting system. The two-speed gearbox with stepless speed adjustment allows optimal speed settings based on diameter, steel quality, or tool type. The intelligent speed control system keeps the motor speed constant regardless of load. The innovative 360° LED display simplifies machine operation and enhances safety at work. Features and advantages: • Powerful motor with robust 2-speed gearbox • Electronic Speed Stabilization System (ESSS) for consistent speed regardless of load fluctuations • Thread cutting in through and blind holes • Milling with carbide or HSS cutters as well as drilling • Electronic clutch • Overload and overheating protection • Robust design for extended tool life • Inclination sensor stops the motor if the machine tilts • 360° visualization displays the current operating status of the drill and provides safety and diagnostic information, e.g., for worn carbon brushes • Innovative, lightweight smart magnet • Magnetic Field Shape Control (MFSC) for maximum holding force on thin materials • Energy Saving Base (ESB) uses only 50% of its power in idle mode • Semi-automatic spline adjustment for easy, fast, precise, and repeatable gib setting without specialist knowledge • Intuitive control panel on top of the drill • Large coolant tank Standard scope of delivery: • Drilling machine • Plastic case • Handles (3 pcs.) • MK3 arbor with 19 mm (3/4") weldon holder • Safety strap • Cooling system • Protective spring for coolant hose • MT2 drift • 5 mm T-handle allen key • 4 mm allen key • 2.5 mm allen key • 8 mm combination wrench • Operating instructions OPTIONS (PRICES ON REQUEST): Pressure cooling system Pipe mounting

Kondisi: baru, en-001 Ksdpfx Agoyrhqts Rolp

Kondisi: baru, en-GB Kodpfx Aeyrhqmsg Rolp

Kondisi: baru, en-GB: Condition: new Delivery time: approx. 2 – 4 weeks from order Country of origin: Poland Price: €995 Drilling capacity in structural steel: 23 mm Arbor: 19 mm Weldon Motor power: 1.15 kW Length: 331 mm Width: 254 mm Height: 456 mm Weight: 15.5 kg Max. drilling capacity: 23 mm Max. core drill capacity: 50 mm Max. cutting depth: 50 mm Stroke: 160 mm Motor speed: 240 / 480 rpm Min. workpiece thickness: 6 mm The PRO-50, equipped with a specially developed motor and 2-speed gearbox (240/480 rpm), is optimised to achieve the correct speed for working with HSS cutters up to Ø 45 mm and twist drills up to Ø 23 mm. The rigid construction, optimised using FEA (Finite Element Analysis) software, increases tool life and allows a cutting depth of up to 75 mm. Its compact design and innovative lightweight intelligent magnet make this machine a true lightweight. The PRO-50 delivers maximum holding force on thin materials thanks to magnetic field shape control (MFSC). Both the drill and operator are protected from working on materials that are too thin by the Magnetic Power Adhesion Control (MPAC) module. In addition, the PRO-50 is equipped with an Energy Saving Base (ESB), which uses just 50% of its power consumption when the motor is not running. Features and Benefits: • Compact design with excellent power-to-weight ratio • Specially developed motor • Motor speeds 240 / 480 rpm (under load) • Spindle fitted with MT2 • Innovative lightweight intelligent magnet • Rigid construction extends tool life • Large stroke allows use of long tools • Motor cable with additional protective cover • Magnetic Field Shape Control (MFSC) delivers maximum holding force on thin materials • Magnetic Power Adhesion Control (MPAC) monitors the adhesion force of the electromagnetic base and protects both operator and machine from working on materials that are too thin • Energy Saving Base (ESB) uses just 50% power when the motor is not running Standard delivery set: • Drilling machine • Plastic case • Handle (3 pcs) • MT2 arbor with 19 mm (3/4”) Weldon holder • Safety belt • Cooling system • Protective spring for coolant hose • MT2 drift • 2.5 mm Allen key • 5 mm Allen key • 5 mm Allen key with handle Kedpfxeyrhp Ne Ag Rslp • 8 mm open-ended spanner • Operating manual OPTIONS (PRICES ON REQUEST): Pipe mounting Pressure cooling system Vacuum pad Vacuum pump Pneumatic ejector

Kondisi: baru, en-GB Ksdpfsyrhp Asx Ag Rslp

Kondisi: baru, translation-01 Klsdpfx Aeyrhppog Rep

Kondisi: bekas, Sabuk Konveyor Elektro Magnetik Lenoir Kedpfxeyv Da Ts Ag Rolp

Kondisi: bekas, Sabuk Konveyor Magnetik Elektro Wagner Kodpoyv A R Dofx Ag Rslp

Kondisi: bekas, Sabuk Konveyor Magnetik Permanen Bakker Magnetics Kodpfx Agjyv A Rqo Rslp

Kondisi: bekas, Sabuk Konveyor Magnetik Elektro Wagner Kljdpfeyv A N Tox Ag Rep

Kondisi: bekas, Sabuk Konveyor Magnetik Elektro Wagner Kledpfxsyv A N He Ag Rjp

Kondisi: hampir baru (bekas), Bagian chuck bandul dari kepala spindel 51:36 388/01 Produsen: tidak diketahui Tipe: Bagian chuck bandul dari kepala spindel Deskripsi: Bagian chuck bandul dari kepala spindel Rasio transmisi: 51:36 Kodpsyrz Tnjfx Ag Rslp Referensi: 388/01 Nomor artikel: 156116 Nomor bagian: 50010002252 Kondisi: belum digunakan / dalam kemasan asli Jumlah: 2 buah

Kondisi: baik (bekas),

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Röhm Spannstock SSP 315/3 Klodsyuwh Tepfx Ag Rsp - No. ID: 161508 - Spannstock stasioner yang dioperasikan secara pneumatis - Chuck penjepit tenaga 3-rahang - Tekanan kerja: 6 bar - Gaya penjepit: 111 kN - Diameter luar: 415 mm

Kondisi: bekas, stuar-scientific-sm1-magnetic-stirrer-listing-de Kljdpfex Npnvsx Ag Rjp

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 32 kg, tegangan masuk: 230 V, Automatic internal lubrication – coolant is delivered directly to the core drill, which increases tool life and work quality. STEPPLESS speed adjustment – allows optimal matching of cutting speed to the material being machined. Morse taper MT4 allows installation of various tools such as twist drills, countersinks, reamers, tapping attachments, or hole saws. Kljdpfx Ageyt I Uuo Rep Powerful high-torque motor with soft start and overload protection ensures reliable operation. Powerful electromagnet securely holds the machine in place during operation. Ergonomic control panel allows quick and intuitive setup of operating parameters. Robust machine construction increases stability and minimizes vibration during machining. Wide range of applications – ideal for industrial, workshop, and service use. Technical Specifications Drilling diameter (core drill): 100 mm Drilling depth (core drill): 100 mm Drilling diameter (twist drill): 38 mm Height adjustment of drill head: 275 mm Max tapping capacity: M32 Spindle speed min.: 50 rpm Spindle speed max.: 800 rpm Speed range – number of steps / stepless: 1. 50 – 110 / 2. 20 – 200 / 3. 200 – 500 / 4. 320–800 Spindle taper: MT4 Weldon shank: 19/32 mm Distance spindle / base plate: 290 mm Distance Weldon shank / max. base plate: 165 mm Magnetic holding force: 20,500 N Magnetic base dimensions: 245 x 125 x 50 mm Motor power: 2580 W Voltage: 230 V Width: 330 mm Depth: 430 mm Height: 830 mm Weight approx.: 31.5 kg

Kondisi: bekas, trans_001 Kljdpoyuqh Tofx Ag Rep

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Kami menjual 11 unit penjepit hidraulik Schunk tipe KSH 250. Meskipun tahun produksi 2002, penjepit ini praktis seperti baru. Masih dilapisi pelindung orisinal dan selalu disimpan kering di dalam gudang. Semua 11 unit belum pernah digunakan. Termasuk sisipan penjepit yang cukup untuk rentang penjepitan Ø34 hingga Ø62. Tentu saja, sisipan penjepit juga dapat disesuaikan dengan kebutuhan spesifik Anda. Kodpfxeyt I Dco Ag Relp

Kondisi: sangat baik (bekas), Excenter chuck with key (28134) in sturdy wooden transport box Manufacturer: Klopfer Type: EZ 32 Diameter: 160 mm Outside diameter: 265 mm Height: 180 mm KK mounting size 5 Taper diameter: 82.575 mm Bolt circle diameter: 104.8 mm Eccentric adjustment range: 0 - 32 mm Includes one set of drilling jaws Includes one set of turning jaws 41.5 kg weight With case: 55 kg The mounting flange can be changed if required Kodpfsgzlmzjx Ag Relp

Kondisi: baik (bekas), Nomor artikel internal: 23045 Pelat Elektromagnetik Produsen: Assfalg 600x300x80 mm 110V Pada pelat terdapat lekukan dengan lebar sekitar 55 mm dan kedalaman 4 mm. Ksdpfxjlvrmtj Ag Relp

Kondisi: bekas, trans_001 Kjdpfx Aeymf U Sjg Relp

Kondisi: diremajakan ulang (bekas), “Wagner 451-130/160-600” for Sale With new transformer from 380 V AC to 220 V DC. Kedpfxeglvwgj Ag Rjlp Manufacturer: Wagner Model: 451-130/160-600 Power: 10.9/7.2 kW Current: 49.3/32.5 A Voltage: 220 V DC Magnet L x W: 1,600 x 1,300 mm Rubber belt: 1,400 mm Overall width: 2,530 mm

Kondisi: bekas, 3-jaw wedge bar power chuck FORKARDT TYPE F+160 No. 1659 181 Equivalent to Forkardt, SMW, or Röhm Diameter: 160 mm Internal diameter: 45 mm Chuck flange: Short taper DIN 55022 size 6 1 set of chuck jaws consisting of base jaws and hard reversible top jaws 1 set of chuck jaws consisting of base jaws and soft reversible top jaws - Central adjustment Weight: 11 kg Good condition Klsdpfx Aef Axpreg Rop

Kondisi: bekas, 3-jaw wedge bar power chuck, presumed RÖHM or SCHUNK Equivalent to Forkardt F315 or SMW Kljdew Dvv Nopfx Ag Rjp Diameter: 318 mm Inner diameter: 85 mm Chuck flange: short taper, DIN 55022, size 8 1 set of chuck jaws consisting of base jaws and hard stepped top jaws 2 sets of chuck jaws consisting of base jaws for bolting on top jaws Weight: 100 kg Good condition