Beli Cnc Weeke bekas (77)

Kondisi: sangat baik (bekas), CNC MACHINING CENTER (POINT-TO-POINT) - 4 axes Gantry-type design Power Control system - woodWOP software Safety enclosure for the machining head Clamping table with 6 consoles Safety tread mats LASER system on the X-axis for console positioning and on the Y-axis for vacuum clamp positioning Automatic tool change system 2 disc-type tool changers - 8 tool positions at the rear + 8 tool positions on the side Maximum working area (X - Y - Z): 3130 x 1250 (1550) x 100 (150) mm 2 working zones - 1 x vacuum pump (capacity 70 m³/h) Chip conveyor With separate electrical cabinet and controls Total connected load: 32 A WORKING UNITS (TOP): 12 independent vertical drilling spindles (High Speed 7500) 6 independent horizontal drilling spindles (4 X-axis + 2 Y-axis) Drilling head motor power: 2.3 kW 1 grooving saw unit, diameter 125 mm, N1 - swiveling 90° in X-Y direction Njdpoyxn Tijfx Afvelf 1 vertical main spindle (milling unit) HSK 63: 9 kW OPTIONAL: Drilling and milling unit with 4 horizontal spindles (cross spindle arrangement) BARCODE SCANNING SYSTEM PACKAGE PROFESSIONAL

Kondisi: sangat baik (bekas), CNC flexible automatic through-feed drilling machine (gantry machine) with dowel insertion system Moving panel (workpiece), moving working head (horizontal panel-workpiece) Control: PowerControl, Software: WoodWOP Integrated machine safety enclosure Workpiece drive via 3 conveyor belts Feed speed (m/min): approx. 1 - 90 Minimum workpiece dimensions (X-Y-Z) in mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) in mm: 3000 x 1400 x 60 Maximum axis travel (X - Y - Z) in mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces possible (in Y-axis): 600 mm + 600 mm Total connected load (kW): 38 WORKING UNITS (TOP): Drilling unit with vertical spindles (qty.): 1 Independent vertical drilling spindles (qty.): 38 + 3 special Independent horizontal drilling spindles (qty.): 6 Grooving saw unit (for machining in X-axis), blade diameter (mm): 100 Vertical main spindle (milling unit), qty.: 1 x SK 30 (vertical main spindle power: 6 kW) Automatic tool change system, disc tool changer, qty.: 3 tool positions WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles (qty.): 2 Nljdpfxed Nvi Do Afvof Horizontal drilling spindles – right side (qty.): 13 + left side (qty.): 13 Injection nozzles for glue application and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (qty.): 1

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, nomor mesin/kendaraan: 0-250-05-2654, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.950 mm, jarak lintasan sumbu Y: 1.943 mm, jarak gerak sumbu Z: 400 mm, model controller: HOMATIC-2000 IPC, No reserve price – guaranteed sale to the highest bidder! The machine is equipped with a C-axis! TECHNICAL DETAILS Travel distances X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical drilling unit X-direction Drill spindles: 16 Feed stroke Z: 60 mm Drilling depth: max. 38 mm Rotation direction: clockwise/counterclockwise Speed: 1,500 – 5,900 rpm Drive: 1.5 kW Drill chuck: d = 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Extraction: central Vertical drilling unit Y-direction Nsdpsx Sqm Ssfx Afvslf Drill spindles: 15 Feed stroke Z: 60 mm Drive: 1.5 kW Rotation direction: clockwise/counterclockwise Speed: 1,500 – 5,900 rpm Drill chuck: d = 10 mm Drilling depth: max. 38 mm Total drill length: 70 mm Drill diameter: max. 20 mm, 1 spindle up to 25 mm Spindle spacing: 32 mm (15 spindles) Spindle type: individually controllable Arrangement: Y-direction Horizontal drilling unit X-direction Drill spindles: 4 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotation direction: counterclockwise Speed: 4,800 rpm Drill chuck: d = 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindles: individually controllable Horizontal drilling unit Y-direction Drill spindles: 2 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotation direction: clockwise Speed: 4,800 rpm Drill chuck: d = 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindle type: individually controllable Milling motor Drive power: 7.5/10 kW (S1/S6-duty) Speed range (stepless): 750 – 18,000 rpm Cooling: liquid circulation cooling Bearings: hybrid bearings (ceramic) Extraction: central Tool changer magazine Magazine stations: 30 tool holders Tool weight: max. 5 kg Tool change time: approx. 8 – 10 seconds MACHINE DETAILS Control: HOMATIC-2000 IPC Liquid circulation cooling: 18,000 l/min Power: 7.5 / 10 kW S1/S6 operation EQUIPMENT integrated CNC axis (360° rotary) torque support main spindle (motor output 7.5 / 10 kW, HSK F63) workpiece support system 1,500 mm workpiece console K-table 1,500 mm moving column extension Y-direction 120 mm compressed air connection rail with quick couplings extraction hood for additional router motor router 5 kW with hydro quick-clamp system safety guard left with door safety tread mat 3,250 mm control cabinet left Note: Further details regarding the equipment of the machine can be found in the attached documents.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-253-05-4317, tinggi benda kerja (maks.): 60 mm, panjang benda kerja (maks.): 1.250 mm, lebar benda kerja (maks.): 800 mm, model controller: Powercontrol PC85T mit Woodwop software, DETAIL TEKNIS Proses: pengeboran horizontal – injeksi lem – pemasangan pasak Panjang benda kerja min/maks: 20 mm / 1.250 mm Lebar benda kerja min/maks: 50 mm / 800 mm Tebal benda kerja min/maks: 10 mm / 60 mm DETAIL MESIN Kontrol: Powercontrol PC85T dengan perangkat lunak Woodwop Pasak: 8 mm x 30 mm, 8 mm x 35 mm Tegangan: 400 V Frekuensi: 50 Hz Fase: 3Ph PERLENGKAPAN Perangkat bor: 1 unit pengeboran dan pemasangan pasak, dapat diprogram bebas Sumbu Z dapat disetel secara manual Kedalaman bor dapat disetel secara manual Nsdpfx Afezhm Sgevjlf Stop tengah dapat diturunkan secara pneumatik 4 penekan vertikal Pompa membran ganda 1:1

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: Max. length 600 mm Configuration: - Horizontal drilling unit with 3 individually selectable spindles, spindle spacing 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drill spindle) - Glue nozzle with adjustable glue dosage - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel dimensions: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel supply 1. BASE MACHINE - Robust steel frame construction - Axis movement in X, Y, and Z directions - Ball screw drive (Y and Z axes) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side fences as well as rear fence rail - Pneumatically lowerable center stop, manually controlled via selector switch Nledpfoxdl Raox Afvjf - 6 top hold-down cylinders, manually adjustable - Central lubrication Power control PC85T Modern control system based on Windows PC

Kondisi: bekas, nomor mesin/kendaraan: 008557, Area kerja sumbu X: 3050 mm Nledpozcbhgofx Afvef Area kerja sumbu Y: 850 mm Daya spindle utama: 5 kW Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 19

Kondisi: bekas, nomor mesin/kendaraan: 006488, Area kerja sumbu X: 2500 mm Area kerja sumbu Y: 850 mm Daya spindle utama: 5 kW Jumlah sumbu yang dikontrol: 3 sumbu Jumlah spindle bor: 11 Nsdpswuclxjfx Afvelf

Kondisi: bekas, nomor mesin/kendaraan: 007734, Area kerja sumbu X: 3050 mm Area kerja sumbu Y: 850 mm Daya spindle utama: 5 kW Jumlah spindle bor: 19 Nodpfx Asw Idb Hefvolf

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, CNC flexible gantry machine Horizontal throughfeed panel Control: Power Control Open powerTouch, software: WoodWOP (TAPIO-ready) Infeed table (panel support) + outfeed table (panel support) Panel feed by 3 conveyor belts Nledpfx Aex Aqi Ejfvsf Min. workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Max. workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Special side guide system for workpieces with 'sensitive' edges 3 upper vertical pressure devices Powered conveyor belt for waste removal Integrated electrical and control cabinet Total installed power (kW): approx. 47 OPTIONAL: WIRELESS BARCODE SCANNER 2 WORKING UNITS (TOP): (SERVO MOTOR for X-Y-Z axes): 4 drilling supports V15 (4 x 2.3 kW), each with 15 vertical spindles (total: 60 upper spindles) 3 WORKING UNITS (BOTTOM): (SERVO MOTOR for X-Y-Z axes): 6 drilling supports V32 (6 x 2.3 kW), each with 32 vertical spindles (total: 192 lower spindles) 2 WORKING UNITS (HORIZONTAL): 2 drilling supports H21 (2 x 2.3 kW) with horizontal spindles 21 horizontal drilling spindles (right) + 21 horizontal drilling spindles (left)

Kondisi: belum diuji (bekas), Tahun pembuatan: 2006, Fungsionalitas: belum diuji, kecepatan rotasi (maks.): 2.970 rpm, panjang benda kerja (maks.): 2.500 mm, lebar benda kerja (maks.): 1.000 mm, Perlengkapan: Penandaan CE, TECHNICAL DETAILS Maximum panel width: 1,000 mm Maximum panel length: 2,500 mm Minimum panel length: 250 mm Minimum panel width: 100 mm Number of vertical lower units: 5 Number of vertical upper units: 1 Lateral horizontal units: yes Number of pressing elements: 5 Number of lateral horizontal units: 2 Motor power: 1.5 kW Speed: 2,970 rpm MACHINE DETAILS Control system: TOPDRILL Nlodoyzy T Tspfx Afvsf Machine programming software: WOODWOP Total installed power: 35 kW EQUIPMENT Lateral horizontal units CNC positioning of the units CNC positioning of the Z-axis Safety standards with CE marking Safety light barriers Automatic chip extraction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the designated location. External reference: 6157

Kondisi: bekas, nomor mesin/kendaraan: 008406, max-breite-paneel-1000-max-lange-paneel-2500-anz-injektoren-12 Nledpfxoyl Ihxe Afvef

Kondisi: sangat baik (bekas), Kontrol PC Power Control PC85T Nljdpfx Afsyv Ev Aevof Software WoodWOP + TOPDRILL No. 2 Konveyor bermotor tipe thru-feed No. 2 Dudukan bor horizontal (tampilan digital untuk data posisi sumbu) No. 1 Unit bor untuk setiap dudukan bor horizontal (1 x 1,5 kW) No. 21 Spindel untuk setiap unit bor horizontal Lebar kerja maks. (mm): 2500 Lebar kerja min. (mm): 250 No. 4 Dudukan bor vertikal bawah (tampilan digital untuk data posisi sumbu) No. 2 Unit bor untuk setiap dudukan bor vertikal bawah (2 x 1,5 kW) No. 4 Penjepit benda kerja vertikal atas Sabuk pembuang serbuk Daya total terpasang (kW): 35

Kondisi: baik (bekas), Tahun pembuatan: 2008, Mesin CNC dengan meja konsol Sumbu X: 6,25 m Sumbu Y: 1,30 m Sumbu C: dengan antarmuka untuk Flex 5 Nledpfjzv Hvzox Afvef Spindel utama: 12 kW, dudukan HSK 63 F, hingga 24.000 RPM Pengubah alat: 14 posisi 2 unit mesin frais atas dengan sistem penjepit cepat Pompa vakum

Kondisi: bekas, nomor mesin/kendaraan: 007202, Max. panel width: 2500 mm Nledpfxeu Rv Ukj Afvjf Max. panel length: 1000 mm Number of units: 3

Kondisi: bekas, nomor mesin/kendaraan: 005910, Area kerja sumbu X: 2500 mm Area kerja sumbu Y: 1300 mm Nledpswuckhofx Afvjf Daya spindle utama: 6 kW Jumlah sumbu yang dikontrol: 3 sumbu Jumlah spindle bor: 84

Kondisi: bekas, nomor mesin/kendaraan: 007400, Lebar panel maks.: 800 mm Panjang panel maks.: 1250 mm Jumlah injektor: 1 Njdpfxot Hmt Ij Afvelf Posisi melalui kontrol NC: ya Kelompok horizontal samping: ya

Kondisi: bekas, nomor mesin/kendaraan: 006157, Max. panel width: 1000 mm Njdpey Nkyaofx Afvjlf Max. panel length: 2500 mm Number of units: 5 Number of units: 1 Positioning via NC control: yes Lateral horizontal groups: yes

Kondisi: sangat baik (bekas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in-line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Feed belts (number): 2 (adjustable feed speed) Horizontal drilling supports (number): 2 Drilling units per horizontal support (number): 2 Spindles per horizontal drilling unit (number): 11 Nljdpfx Aoh Ryhnsfvef Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (number): 6 Drilling units per lower vertical support (number): 2 Spindles per drilling unit on lower support (number): various Upper vertical drilling supports (number): 2 Spindles per drilling unit on upper support (number): 2 Upper vertical workpiece clamps (number): 6 Chip extraction conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Kondisi: diremajakan ulang (bekas), PC control Power Control Software No. 2 infeed motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) Nlodpovhcbzefx Afvjf No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Max. working width (mm): 3000 Min. working width (mm): 250 No. 6 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital position display for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the upper drilling supports No. 6 upper vertical workpiece clamps Chip conveyor Total connected load (kW): approx. 50 / 60

Kondisi: bekas, nomor mesin/kendaraan: 008014, Panjang maksimum panel: 1250 mm Nledpfx Afowuz S Dovof Grup horizontal samping: ya

Kondisi: belum diuji (bekas), Tahun pembuatan: 1976, nomor mesin/kendaraan: 1299, Marke: Weeke Modell: PE 75 Nodpfx Aou Nwzcofvelf Baujahr: 1976 Motor: 7,5 kW, 50 Hz, 380 V, 3-phasig Lagernummer: 10316

Kondisi: bekas, nomor mesin/kendaraan: 006158, Maximum panel width: 1000 mm Maximum panel length: 2500 mm Nlodpfxoiwptue Afvjf Number of injectors: 14 Positioning via NC control: yes

Kondisi: sangat baik (bekas), COMPLETE 4-SIDE FORMAT PROCESSING AND EDGE-BANDING LINE, max. working width 2500 mm, equipped with automatic feeding and stacking system, consisting of the following machines: X04004A) Feeding gantry (with 2 loading stations) "BARGSTEDT" TBH 500/D/30/14 Nedpelikvhsfx Afvolf X04004B) Rotating device (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDR31/25/12 X04004C) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004D) Separation station "BARGSTEDT" X04004E) Double-sided sizing and edge-banding machine "HOMAG" Model KFR 620/19/QA/25 X04004F) 1st Drilling machine "WEEKE" Model BST 500 D X04004G) 2nd Drilling machine "WEEKE" Model BST 500 D X04004H) Rotating device (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Cut-off saw (Splitter) "HOMAG" Model FPR620/04/15/PS/LQ (for final cut) X04004M) Stacking gantry (with 2 unloading stations) "BARGSTEDT" Model TSP 420/40/30/12 BA

Kondisi: sangat baik (bekas), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Nsdpfx Asivawpofvslf No. 11 spindles for each drilling unit on the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor Total connected load (kW): 20

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER) Nodpfsgwbbqox Afvolf