Beli Depan Berat bekas (8.266)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. Bljdpfx Amjmhh Dhj Isg When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Blodpfx Asfdkb Tjm Iog Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, usable depth 1,000 mm - 12 cantilever arms, usable depth 1,000 mm, standard - Including horizontal and diagonal braces for 1,300 mm bay distance - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) Bodpfx Aomhh Dzem Islg - (*No damaged parts!) - (*Spare parts can be reordered and extensions possible at any time) - (*Offer available in larger quantity: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm bay distance - Rack length = 4,000 mm - Including fasteners (without floor anchors) - With assembly instructions and C4 load capacity labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance notification prior to delivery. The material is sensibly packed to facilitate easy unloading. If installed outdoors, the load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, and suitable for anchor fixing, and must support the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither required nor recommended. According to professional association guidelines, the top storage level should have at least a 500 mm overhang above the top of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Bodpfx Ajmhh Anjm Ielg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, de-to-en-001 Bsdpfxsguk A He Am Ielg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with base, usable depth 1,200 mm - 27 cantilever arms, usable depth 1,200 mm, with end stops - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roof structure (*Without timber purlins and trapezoidal sheets for roof construction) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available to order and system can be expanded at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof beams (maximum snow load 1.85 kN/m², wind load zone 2) Bljdpfsmhhy Njx Am Isg - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with end stops = 4 storage levels - Including longitudinal and diagonal bracing with 1,500 mm upright pitch - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and C4 load signs as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site pick-up possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior delivery notification. The material is packed for easy unloading. The base must be concrete, level, suitable for anchor fixing, and able to withstand applied loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary permits from authorities. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, rack uprights should have at least 500 mm of upright projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard Bedpfx Amjguk Dko Ielg - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Bjdpfx Aomhh Dtom Ielg Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Bledpfjguk Dvjx Am Ieg Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: T331051593, Tahun pembuatan: 2006, jam operasional: 5.323 h, kapasitas angkut: 16.000 kg, tinggi angkat: 3.980 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, tinggi konstruksi: 3.920 mm, daya: 147 kW (199,86 hp), lebar kerangka garpu: 2.950 mm, panjang garpu: 2.400 mm, berat kosong: 24.300 kg, jenis penggerak: Diesel, lebar konstruksi: 2.950 mm, Forklift kapasitas berat – Diesel Nomor rangka: T331051593 Titik berat muatan: 1200 Lebar garpu: 250 mm Tebal garpu: 100 mm Kelas ISO: Terminal West Tipe tiang: Standar Transmisi: Dana Clark 342TE13310-20 Kondisi: Siap pakai dan berfungsi penuh Kondisi teknis: baik Jenis ban depan: pneumatic Ukuran ban depan: 12.00-20 Kondisi ban depan: 40 – 60% Jenis ban belakang: pneumatic Ukuran ban belakang: 12.00-20 Kondisi ban belakang: 20 – 40% Deskripsi: Transmisi telah direkondisi dengan garansi (perbaikan senilai € 17.000,00), carriage garpu lebar 2.950 mm Sideshifter, alat penyetel garpu, Bljdpfx Aoyy Effom Iog Katup ke-3, katup ke-4, lampu kerja depan, pemanas, kabin full tertutup,

Kondisi: bekas, We offer used pallet racking for sale here. TECHNICAL DATA Frame: 3,000 x 1,100 mm x 70 mm Finish: galvanized Beams: 2,700 mm Box profile: 120 x 50 mm Bay load capacity: 2,400 kg Colour: orange Manufacturer: Tegometall Condition: used Scope of delivery: 1 starter bay + 2 extension bays, consisting of: 2 starter bays + 8 extension bays 12 frames 40 beams 160 locking pins Yellow upright protectors (Stielschutz) can be purchased for €5.00 each plus VAT. Bljdpfx Amoy Dgcme Ijg PRICES Price: €1,115.68 net Price: €1,327.66 incl. VAT Available quantity: 350 m pallet racking Location: 14656 Brieselang – Transport can be organized upon request. YOUR CONTACT PERSONS AT OUR COMPANY Tanja Henkelmann Rainer Nürenberg Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipment is possible at an additional cost. The extra charges depend on the delivery location and volume of the shipment and can be individually requested from us. PAYMENT TERMS Payment terms are to be agreed in case of order. The price given is a unit price/net price or as otherwise specified in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US The company DLK in Nordhorn trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanines, textile warehouses, as well as machines for trade, industry and crafts. We continually offer you interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success components of DLK – Storage technology | Levelmaker® | Logistics | Solutions

Kondisi: bekas, We are offering used pallet racking for sale. TECHNICAL DATA Bedpfx Aey Dga Eem Islg Frames: 3,000 x 1,100 mm x 70 mm Finish: galvanized Beams: 2,700 mm Box section: 120 x 50 mm Bay load: 2,400 kg Colour: orange Manufacturer: Tegometall Condition: used Scope of delivery: 1 starter bay + 2 add-on bays consisting of: 4 frames 12 beams 2 locking pins Yellow impact protectors (upright guards) can be purchased for €5.00 each (net). PRICING Price: €360.00 net Price: €428.40 incl. VAT Available quantity: 350 m pallet racking Location: 14656 Brieselang – transport can be arranged upon request YOUR CONTACTS AT OUR COMPANY Tanja Henkelmann Rainer Nürenberg Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly. This item is available for collection. Delivery or shipping can be arranged for an additional charge. Additional costs depend on the delivery location and shipment size and can be requested individually. PAYMENT TERMS Payment terms are to be agreed upon when placing an order. The price is per item/net price or as stated in the description (plus VAT). You will, of course, receive an invoice showing VAT. ABOUT US DLK, based in Nordhorn, trades in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile warehouses as well as machinery for trade, industry, and crafts. We continuously offer attractive deals on used equipment from a variety of manufacturers/brands. If you have any questions, please feel free to contact us. ✅ Four wins – The building blocks of DLK success – Warehouse technology | Levelmaker® | Logistics | Solutions

Kondisi: bekas, steady rest tugas tetap Tinggi pusat: 1040 mm Diameter dalam: 480 mm Berat: 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Blsdpfsdbbuisx Am Isg DE - 44143 Dortmund - Wambel / Jerman

Kondisi: bekas, lunette berat tetap Bedpfx Amodbbuye Iolg

Kondisi: sangat baik (bekas), jarak tempuh: 493.000 km, daya: 460 kW (625,43 hp), jenis bahan bakar: diesel, ukuran ban: 385/65R22,5, konfigurasi gandar: 8x4, jarak roda: 3.900 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 900 l, rem: retarder, warna: hijau, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja-udara, panjang total: 8.170 mm, lebar total: 2.550 mm, beban gandar yang diizinkan (gandar 1): 9.000 kg, beban gandar yang diizinkan (gandar 2): 8.000 kg, beban gandar yang diizinkan (gandar 3): 13.000 kg, Tahun pembuatan: 2015, Perlengkapan: ABS, AdBlue, pendingin udara, retarder,

Kondisi: sangat baik (bekas), jarak tempuh: 540.000 km, daya: 552 kW (750,51 hp), pendaftaran pertama: 02/2014, jenis bahan bakar: diesel, ukuran ban: 385/65R 22.5, konfigurasi gandar: 8x4, jarak roda: 3.900 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 950 l, rem: retarder, warna: biru, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, suspensi: baja-udara, beban gandar yang diizinkan (gandar 1): 10.000 kg, beban gandar yang diizinkan (gandar 2): 9.500 kg, beban gandar yang diizinkan (gandar 3): 13.000 kg, Tahun pembuatan: 2014, Perlengkapan: AdBlue, retarder,

Kondisi: baru, daya: 331 kW (450,03 hp), jenis bahan bakar: diesel, berat keseluruhan: 33.000 kg, konfigurasi gandar: 3 gandar, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, Perlengkapan: pendingin udara,

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: NM0LCTP67XSD98886, jarak tempuh: 500 km, daya: 375,1 kW (509,99 hp), pendaftaran pertama: 02/2026, jenis bahan bakar: diesel, ukuran ban: 315/80 R22.5, kondisi ban: 100 persen, konfigurasi gandar: 6x4, jarak roda: 5.150 mm, inspeksi berikutnya (TÜV): 02/2027, bahan bakar: diesel, warna: abu-abu, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, jumlah gigi: 16, kelas emisi: Euro 6, suspensi: pegas daun parabola (per), jumlah tempat duduk: 2, panjang total: 8.115 mm, lebar total: 2.540 mm, tinggi total: 3.354 mm, beban gandar yang diizinkan (gandar 1): 8.000 kg, beban gandar yang diizinkan (gandar 2): 13.400 kg, beban gandar yang diizinkan (gandar 3): 13.400 kg, Tahun pembuatan: 2026, jam operasional: 1 h, Perlengkapan: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS (Sistem Rem Elektronik), Port USB, Tachograph, asisten tetap jalur, asisten titik buta, bantuan mulai menanjak, filter jelaga, kantung udara, kemudi berkuasa, kendali jelajah, kendaraan non-rokok, kompresor, komputer bawaan, kontrol traksi, kunci sentral, lampu depan tambahan, lampu kabut, pemanas jok, pemantauan tekanan ban, pendaftaran truk, pendingin udara, pengaturan jendela elektrik, program stabilitas elektronik (ESP), sistem navigasi, spion elektrik, spoiler,

Kondisi: bekas, jarak tempuh: 310.100 km, daya: 390 kW (530,25 hp), pendaftaran pertama: 08/2006, jenis bahan bakar: diesel, ukuran ban: 385/65 R 22.5, konfigurasi gandar: 8x4, jarak roda: 5.450 mm, bahan bakar: diesel, rem: retarder, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 3, suspensi: baja, panjang total: 7.700 mm, lebar total: 2.550 mm, Tahun pembuatan: 2006, Perlengkapan: ABS, kendali jelajah, kunci sentral, pemanas parkir, pendingin udara, pengaturan jendela elektrik, retarder,

Kondisi: sangat baik (bekas), jarak tempuh: 424.583 km, pendaftaran pertama: 06/2016, jenis bahan bakar: diesel, konfigurasi gandar: 8x4, jarak roda: 3.700 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 1.000 l, rem: pengereman mesin, warna: kuning, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, panjang total: 7.600 mm, lebar total: 2.550 mm, beban gandar yang diizinkan (gandar 1): 10.000 kg, beban gandar yang diizinkan (gandar 2): 8.000 kg, beban gandar yang diizinkan (gandar 3): 9.500 kg, Tahun pembuatan: 2016, Perlengkapan: ABS, AdBlue, filter jelaga, kendali jelajah, kunci sentral, lampu kabut, pemanas parkir, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik, spoiler,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: FN503832, Tahun pembuatan: 2016, jam operasional: 1.974 h, kapasitas angkut: 8.000 kg, tinggi angkat: 4.500 mm, pengangkatan bebas: 1.500 mm, jenis bahan bakar: gas, tipe tiang: triplex, panjang garpu: 2.400 mm, jenis penggerak: Treibgas, Heavy-duty forklift – LPG Chassis number: FN503832 Blsdpfx Amjwzdrao Ijg Load centre: 500 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tyres type: solid rubber Front tyres condition: 80 – 100% Rear tyres type: solid rubber Rear tyres condition: 80 – 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heater, fully enclosed cab, full free lift, Tyres: non-marking white solid rubber

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2001, jam operasional: 14.890 h, kapasitas angkut: 22.000 kg, tinggi angkat: 3.800 mm, pengangkatan bebas: 150 mm, jenis bahan bakar: diesel, tipe tiang: dupleks, tinggi konstruksi: 3.710 mm, produsen motor: Scania, tipe perpindahan gigi: hidrostatik, kondisi ban: 85 persen, berat keseluruhan: 33.200 kg, panjang total: 6.050 mm, lebar total: 3.030 mm, warna: kuning, Forklift tugas berat SMV SL22-1200A Merek: SMV Tipe forklift: SMV SL22-1200A Tahun pembuatan: 2001 Jam operasional: sekitar 15.000 jam Bjdpfx Amey A Sgbo Ijlg Tipe tiang: Duplex Ketinggian angkat: 3.800 mm Tinggi keseluruhan: 3.710 mm Free lift: 150 mm Tipe penggerak: Diesel Mesin: Scania Lebar kendaraan: 3.030 mm Panjang kendaraan: 6.050 mm Berat total: 33.200 kg Kapasitas angkat nominal: 22.000 kg pada LSP 1.200mm Perlengkapan khusus: kabin penuh, pemanas, AC, lampu sesuai STVZO, lampu rotari, lampu kerja depan dan belakang, kursi kain, kaca spion panorama, Perawatan dan pemeriksaan FEM 4.004 – BARU Attachment: Sideshifter dan fork positioner Panjang garpu: 2.400 mm

Kondisi: bekas, jarak tempuh: 188.765 km, daya: 425 kW (577,84 hp), pendaftaran pertama: 05/2022, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, inspeksi berikutnya (TÜV): 05/2026, rem: retarder, warna: abu-abu, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, jam operasional: 24 h, kapasitas angkut: 33.000 kg, tinggi angkat: 4.000 mm, jenis bahan bakar: diesel, tipe tiang: dupleks, tinggi konstruksi: 4.020 mm, daya: 185 kW (251,53 hp), lebar kerangka garpu: 3.400 mm, panjang garpu: 3.000 mm, jenis penggerak: Diesel, Forklift berat - Diesel Titik beban: 1200 Lebar garpu: 300 mm Tebal garpu: 110 mm Tipe tiang: Duplex Transmisi: Dana Kondisi: Unit baru Kondisi teknis: Baru Jenis ban depan: Pneumatik Bljdey Aqpnspfx Am Ijg Jenis ban belakang: Pneumatik Deskripsi: Side shifter, perangkat pengatur garpu, pengaturan garpu individual hidrolik Katup ke-3, katup ke-4, lampu kerja belakang, lampu kerja depan, pemanas, kabin penuh, sertifikat CE, timbangan, kaca spion dalam, kaca spion luar, LED, katup ke-5, sistem pertukaran cepat Terminal-West

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1977, kapasitas angkut: 35.000 kg, tinggi angkat: 6.000 mm, jenis bahan bakar: diesel, tipe tiang: dupleks, jenis penggerak: Diesel, Forklift berat - Diesel Pusat berat: 1200 Jenis tiang: Duplex Kondisi: Siap pakai dan berfungsi penuh Kondisi teknis: normal Jenis ban depan: Pneumatik Jenis ban belakang: Pneumatik Bljdey Aqphjpfx Am Ijg Deskripsi: kondisi siap jalan, running condition Kabinnya penuh,