Beli Desain Interior bekas (7.523)

Kondisi: bekas, nomor mesin/kendaraan: 007504, Posisi 1: Gudang vertikal IMA + SCHELLING-AH 6 Posisi 2: Gergaji panel model sudut IMA + SCHELLING-AH 6 Ihjdpjwuucijfx Aa Not Posisi 3: Loader IMA + SCHELLING-AH 6

Kondisi: bekas, Manufacturer: EATON Type: AB 12240 E 36 units available Ihsdpfx Ajd N Sv Nja Njt New goods

Kondisi: bekas, en1 Ijdpeu Ngybjfx Aa Noht

Kondisi: baru, IPETRONIK Cabin Simulation Box We offer you an IPETRONIK cabin simulation box. Technical data and system description: IPETRONIK cabin simulation box (new and unused) The cabin simulation box is designed to simulate the passenger compartment for tests in recirculation mode. It features a variable internal volume from 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or air conditioning unit is regulated and directed into the cabin. With the cabin simulation box, only rear evaporators installed in the passenger compartment are tested. The insulated housing is mounted on an aluminium profile frame with castors. An internal chamber light is installed. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed, and the system stops. (TRIP TEMPERATURE: 80°C) Technical data of the insulated chamber: Dimensions: External: Width 1,860 mm, Depth 2,360 mm, Height 1,360 mm Internal: Width 1,700 mm, Depth 2,200 mm, Height 1,200 mm Iedelypy Espfx Aa Nsht Insulation: 80 mm polyurethane rigid foam, CFC-free, U-value 0.27 W/m²K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: tongue-and-groove system with foam-embedded eccentric locking hooks. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grain 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM-diamond, anti-slip, Perimeter floor edges upturned at 90° (approx. 15 mm), floor flush with wall paneling, Pressure distribution plate made of laminated wood, loadable with rubber wheels (support area > 4 cm²), 30,000 N/m² surface load, floor joints fully welded, integrated stainless steel floor drain pipe, led downward through the floor Chamber door: Hatch-type single-leaf door, 800 x 1,200 mm, DIN left, heated door frame (230 V), Silicone-free heating bands, all-round EPDM sealing profile, Latch handle, lockable, emergency release, Heated inspection window, 500 x 500 mm, triple-glazed, Surface heating (230 V), frame heating (230 V), heating controlled externally, Silicone-free edge band Sliding wall: 1,680 x 1,180 mm, 80 mm polyurethane rigid foam, both sides 0.8 mm stainless steel sheet 1.4301, ground, grain 320, protective film, enclosed by sheet metal on all sides (The rear wall can be manually and steplessly adjusted to vary the volume) Recirculation system: A heat exchanger (Systemair) is mounted in the recirculation circuit for indirect temperature control. Air is circulated by a radial tube fan (Cosmo), heating is provided by an electric heater (Türk and Hillinger) integrated into the brine circuit. Heaters are permanently monitored by temperature monitors and limiters (Türk and Hillinger, Johnson Controls). Cooling is via a secondary brine circuit with pumps (KSB) and 3-way valve (Belimo). Installed electrical heating power: 1 x 6 kW. Mix ratio: 50% water / 50% ethylene glycol. Mains supply: =TME2++AS-QF21 Operating voltage: 400 V Power: 17 kW Rated current: 33 A Main fuse: 35 A Control voltage: 24 V DC / 24 V AC / 230 V AC PLC system: S7 300 Type: IPETRONIK cabin simulation box Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), jarak tempuh: 923.715 km, daya: 355 kW (482,67 hp), pendaftaran pertama: 10/2018, jenis bahan bakar: diesel, ukuran ban: 385/65 R 22.5, konfigurasi gandar: 4x2, jarak roda: 3.800 mm, bahan bakar: diesel, warna: merah, kabin pengemudi: kabin tidur, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja-udara, panjang total: 6.160 mm, lebar total: 2.550 mm, Tahun pembuatan: 2018, Perlengkapan: ABS, AdBlue, filter jelaga, kantung udara, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kopling trailer, kulkas, kunci diferensial, kunci sentral, lampu kabut, pemanas parkir, pendingin udara, pengaturan jendela elektrik, program stabilitas elektronik (ESP), spion elektrik, spoiler, tangki bahan bakar kedua,

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.250 mm, beban meja: 12.000 kg, diameter spindel: 130 mm, kecepatan spindel (maks.): 3.000 rpm, panjang meja: 1.800 mm, lebar meja: 1.600 mm, tahun perombakan terakhir: 2025, WHN13-CNC Ijdpfx Aajflcx Tj Noht

Tahun pembuatan: 2002, Kondisi: baik (bekas),

Kondisi: bekas, Tahun pembuatan: 1977, details-01 Ihjdpfew Rv Tasx Aa Nst

Kondisi: bekas, nomor mesin/kendaraan: 005445, Lebar panel maks.: 3200 mm Panjang panel maks.: 2120 mm Julur maksimum mata gergaji utama: 165 mm Jumlah penjepit longitudinal: 4 Jumlah penjepit transversal: 9 Stasiun berputar: ya Iedpfx Ajiiiuyja Noht Sistem pemuatan untuk panel tipis: ya

Kondisi: bekas, nomor mesin/kendaraan: 005456, Lebar maksimum panel: 2200 mm Panjang maksimum panel: 4500 mm Ihedpfx Aaowuz Dye Njt Maks. keluaran mata gergaji utama: 123 mm Jumlah penjepit memanjang: 8 Jumlah penjepit melintang: 5 Penahan fleksibel kedua: ya Stasiun berputar: ya

Kondisi: bekas, Tahun pembuatan: 2005, de-01 Ijdpfx Aajxwdxio Njht

Kondisi: bekas, nomor mesin/kendaraan: 005711, Max. panel width: 4500 mm Iedpjhvm Diofx Aa Noht Max. panel length: 2200 mm Max. main saw blade projection: 95 mm Number of longitudinal clamps: 5 Number of cross clamps: 8 Second flexible hold-down: yes

Kondisi: bekas, nomor mesin/kendaraan: 006006, Max. panel width: 2300 mm Max. panel length: 4300 mm Max. projection of main saw blade: 135 mm Iodpfx Aaou Rv Uqs Nsht Number of longitudinal clamps: 7 Number of cross clamps: 20 Second flexible hold-down: yes Rotating station: yes

Kondisi: bekas, jarak tempuh: 598.116 km, daya: 353 kW (479,95 hp), pendaftaran pertama: 03/2019, jenis bahan bakar: diesel, ukuran ban: 385/55R22.5, konfigurasi gandar: 4x2, jarak roda: 3.600 mm, bahan bakar: diesel, warna: abu-abu, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, suspensi: baja-udara, panjang total: 5.720 mm, lebar total: 2.550 mm, Tahun pembuatan: 2019,

Tahun pembuatan: 2020, Kondisi: baru, nomor mesin/kendaraan: GALEN-RSC 200, Unladen weight: 2,300 kg Suitable for use with: Construction machinery Ijdpfxon Tm Ibe Aa Njht Cargo volume: 1,500 l

Kondisi: sangat baik (bekas), Digital internal gauge Ihsdpovwa D Esfx Aa Net Manufacturer: Intertronic Model: EID 1010 Measuring range: 10–35 mm (108147)

Kondisi: bekas, Horizontal mitre band saw in swivel-frame design JAESPA Type W 320 G Serial No. 18793 / 99 Year of manufacture: 1999 Cutting capacity at 90° (Round): Ø 320 mm Cutting capacity at 90° (Square): 320 x 320 mm Cutting capacity at 90° (Flat): 460 x 200 mm Cutting capacity at 45° (Round): Ø 290 mm Cutting capacity at 45° (Flat): 290 x 220 mm Ihjdpfx Aswwaz Aja Nst Cutting capacity at 45° (Square): 240 x 240 mm Cutting capacity at 30° (Round): Ø 200 mm Cutting capacity at 30° (Square): 200 x 200 mm Cutting capacity at 30° (Flat): 220 x 200 mm Saw blade dimensions: 4120 x 27 x 0.9 mm Saw blade speed: approx. 50 m/min Material infeed height: approx. 630 mm Saw motor power: 1.5 kW Electrical connection: 400 Volt, 50 Hz - Quick miter adjustment via swiveling saw frame with rotary table and clamping - Infinitely variable miter cuts from 30° to 90° - Hydraulic saw frame movement with rapid approach and automatic return after cutting - Material height detection via limit switch - Quick-adjust vice with eccentric clamping - Coolant system integrated into machine base - Emergency-stop mushroom push-button Space requirements (L x W x H): 2000 x 1150 x 1800 mm Weight: 975 kg

Kondisi: baik (bekas), Tahun pembuatan: 2008, Urban PF 3000 / Gantry-Type Machining Centre, Year of manufacture: 2008, Heidenhain iTNC 530 control, Travel X/Y/Z: 3,210/695/585 mm, Gantry-type machining centre, Drilling capacity in ST 60: Ø 18 mm, Thread cutting: M16, Spindle speed up to 8,000 rpm, SK 40, 12-position automatic tool changer, Table size: 3,000 x 700 mm, Chip tray, Isdpfx Aeu Tptcja Njht Coolant system, Electronic handwheel, Tool length measurement device,

Kondisi: bekas, cylinder bore diameter 165 mm stroke 120 mm center height 100 mm total power requirement 1.5 kW machine weight approx. 1 t SUNNEN (USA) horizontal automatic honing machine type: MBC 1804 G year of manufacture: 1K1-90075 Honing diameter range – Ø with measuring control 1.5 – 51 mm with automatic stroke 1.5 – 95 mm with manual stroke 1.5 – 165 mm Max. workpiece length approx. 400 mm Max. workpiece length with measuring control 254 mm 12 spindle speeds 200 – 2,500 rpm 5 stroke rates 80 – 310 strokes/min Stroke length with automatic stroke 6 – 120 mm Honing spindle drive/stroke motor 0.75 / 0.37 kW - 380 V - 50 Hz total drive approx. 1.5 kW - 380 V - 50 Hz Ihjdpfx Aaew U U Iqs Nst Accessories / Special features: • Automatic machining cycle with automatic mechanical stroke, automatic hydro-mechanical expansion of the honing tool, and automatic shut-off when target diameter is reached. • Electromechanical measuring control opposite the tool spindle for mounting a measuring probe corresponding to the target diameter, which triggers the automatic shut-off. • Infinitely variable expansion pressure adjustment • Foot switch for manual operation • Built-in honing oil supply • Operating manuals. Unfortunately, no tool holders or other accessories included. Condition: Very good condition! Suitable for all honing tasks! A video of the machine will be available shortly—please click here. Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice.

Kondisi: baru, Perlengkapan: dokumentasi / manual, Kami memproduksi konveyor terutama untuk industri makanan dalam berbagai desain dan ukuran, yang sepenuhnya disesuaikan dengan kebutuhan Anda. Keunggulan: - Kecepatan konveyor dapat diatur melalui potensiometer/inverter frekuensi - Sensor untuk aksi operasional tertentu beserta kontrol PLC tersedia - Setiap jenis sabuk konveyor dapat direalisasikan - Ukuran dan dimensi individual - Seluruh konstruksi dari baja tahan karat - Kuat untuk aplikasi makanan - Desain higienis, tanpa penumpukan produk - Mudah dibersihkan - Umur pakai yang panjang - Pengoperasian mudah - Kokoh, tahan aus, dan aman dioperasikan Anda memesan langsung dari produsen dan kami menjamin harga terbaik! Kami memproduksi konveyor Anda sesuai spesifikasi Anda! Ijdpfow Nxwrox Aa Neht

Kondisi: bekas, Tahun pembuatan: 1965, Bore diameter 80 mm Stroke 280 mm Throat depth 300 mm Total power requirement 6 kW Machine weight approx. 2.6 t Max. honing diameter 10–100 mm Max. honing depth approx. 250 mm Max. spindle stroke 260 mm Throat depth 300 mm Mounting height 1,000 mm Iodpet Hwupjfx Aa Neht Table size 350 x 500 mm Table height above floor 500 mm Spindle speeds steplessly adjustable approx. 85–300 rpm / 170–600 rpm Stroke speeds steplessly hydraulically adjustable 0–23 m/min Spindle drive 2 kW Total drive approx. 6 kW – 380 V – 50 Hz Weight approx. 2,600 kg Accessories / Special equipment: - Mounted 2-station swivel table for holding two workpieces with mechanical workpiece clamping via hand lever. - Hydraulic feed of the tool - Shut-off via timer control, presumably with air measuring device. - Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We await your order. Other honing machines are constantly in stock – please inquire with us.

Kondisi: bekas, Tahun pembuatan: 1984, Honing diameter 12 mm Stroke 40 mm Iodpet Hwvtjfx Aa Noht Throat depth mm Total power requirement 15 kW Machine weight approx. 5 t Space requirement approx. m G E H R I N G 3-spindle vertical portal honing machine Type M 3-40-12 Year of manufacture 1986 _____ Honing diameter normal/maximum: 2.5 - 12 / 40 mm Max. honing depth approx.: 4-40 mm Max. spindle stroke: 40 mm Installation height table to spindle lower/upper: 300 mm Table size / Ø: 750 mm Table height above floor: 1,100 mm Spindle speeds steplessly adjustable: 800 - 4,000 RPM Stroke speed steplessly adjustable: 380 DH/min Spindle drive: 3 x 1 kW Total drive: 15 kW - 380 V - 50 Hz Weight: 5,000 kg Accessories / Special Equipment · Machine is equipped for precision honing of an automotive valve body approx. Ø12 x 40 mm high, with a blind hole of approx. Ø8 mm x 20 mm, consisting of: · BOSCH PLC control for programmable operation and "Cylindromatic S" control. · 8-station indexing rotary table, type DH 750-45, approx. Ø750 mm · Parts feed via chute, with a deburring station, pre-measurement station, and part turning station located outside the table area · Pre-honing with subsequent measuring station · Intermediate honing with subsequent measuring station · Finish honing with subsequent measuring station · Workpiece unloading and sorting for good and reject parts · MAZ-8-42 mechanical automatic adjustment heads for honing stone expansion · The 3 measuring stations operate using an air gauge plug, which enters the bore and transmits any correction values to the fine adjustment of the spindle. · Complete coolant oil system with belt filter, separate control cabinet, separate hydraulics, etc.

Kondisi: bekas, Tahun pembuatan: 1998, Bore diameter 90 mm Stroke 490 mm Throat depth 400 mm Total power requirement 10 kW Machine weight approx. 3,500 kg Space requirement approx. m KADIA Vertical honing machine Type VZH 90 / 450 F Year of manufacture 1998 Serial No. 50 / 1790 _____ Max. honing diameter 10 – 90 mm Max. honing depth 30 – 450 mm Max. spindle stroke 490 mm Spindle throat depth 400 mm Installation height under spindle nose approx. 1,200 mm Table size approx. 400 x 600 mm Max. workpiece diameter approx. 700 mm Spindle speeds steplessly variable 160 – 830 rpm Stroke speed steplessly variable 25 mm/min Spindle drive 4.5 kW Ijdpet Hw T Sjfx Aa Noht Total drive power 10 kW - 400 V - 50 Hz Weight approx. 3,500 kg Overall height of the machine approx. 4,000/3,300 mm Accessories / Special equipment • Machine equipped with a Siemens S5 / Unipos 4.0 PLC control for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With fixed table 600 x 400 mm • Automatic shut-off after a specified and pre-selectable time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feed head ESZ 90/1 D • Separate hydraulics, central lubrication, workpiece clamping device on table • Currently no suitable coolant system, no honing tools included. Condition: good to very good – demonstration ready Delivery: ex stock – as inspected here Payment: strictly net – upon receipt of invoice

Kondisi: sangat baik (bekas), Honing diameter: 1.5 – 165 mm Stroke: 80 – 160 mm Spindle speeds: 200 – 2,500 rpm Stroke speed – under load: 80 – 310 strokes/min Iedpfxewva Rno Aa Nsht Total power requirement: 0.9 kW Machine weight approx.: 0.6 t Space requirement approx.: 1.2 x 1.0 x 1.6 m Precision cross-honing machine with automatic measurement control Includes workpiece holders, small measurement table, digital gauge, tool accessories,

Kondisi: bekas, Used control panel NAGEL MSU2 Hole diameter 99,999 mm Stroke 99,999 mm Reach 99,999 mm Without warranty Ihsdsv Twgiepfx Aa Njt