Beli Dingin bekas (5.110)

Kondisi: bekas, 1 used cold circular saw KALTENBACH KKS 400 Technical data: Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting range flat: 315x40 mm Cutting range square: 120x120 mm Total power requirement: 1.5 kW Space requirement approx.: 1200 x 1000 x 1700 mm Machine weight approx.: 1,250 kg Manufacturer’s description: The powerful drive system provides the basis for high cutting performance, long blade life, and perfectly clean cut surfaces. All gears are hardened and ground. The entire gearbox operates in an oil bath; all bearing points are equipped with roller bearings. By changing gears, different speeds can be achieved, with cutting speeds electrically controlled by pole-changing motors. The proven saw blade guide in a robust pivot bearing is virtually wear-free. It is rigid, allowing operation within the tightest tolerances. The hydraulic feed of the saw blade is infinitely adjustable according to the scale. Hedpeq Ukvxjfx Adqonu

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 450 mm, jenis arus masuk: tiga fasa, tegangan masuk: 380 V, hentian panjang: 4.000 mm, Gergaji dingin Eisele PSU 450, kondisi terawat baik dan sepenuhnya berfungsi, dengan pembatas panjang elektro-pneumatik, termasuk berbagai mata gergaji segmen dan baja padat. Hnedpew U Ahrofx Adqju

Kondisi: baik (bekas), Tahun pembuatan: 1986, nomor mesin/kendaraan: 0783, Mitre Cold Circular Saw EISELE Model: VMS-III-S-PV Type No.: 430 Machine No.: 0783 Year of manufacture: 1986 Cutting range at 90° (Round): Ø 120 mm Cutting range at 90° (Flat): 150 x 110 mm Cutting range at 45° (Round): Ø 100 mm Cutting range at 45° (Flat): 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 2 and 2.6 kW Power supply: 380 Volt, 50 Hz Equipment: Hnedot A Ar Sopfx Adqou - Semi-automatic vertical cold circular saw - Pneumatic quick clamping device for material - Continuously adjustable pneumatic saw blade feed - Convenient mitre adjustment with fixed stops - Saw carriage on a very robust rectangular guide - Convenient, continuously adjustable stroke setting of the saw unit via clamping lever - Generously dimensioned gearbox - With Eisele rotation compensation for long saw blade service life - Easy saw blade exchange - High productivity with minimal space requirement (less than 1 m²) - Coolant system integrated in the machine base Space required: 1100 x 710 x 1900 mm (L x W x H) Weight: 460 kg The machine can be inspected and tested under power at our facility by appointment. All information is subject to change without notice. Subject to prior sale. The item is sold without any warranty. This exclusion does not apply to damages resulting from gross negligence or intentional misconduct by the seller, nor to injury to life, limb or health.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 370 mm, Otomatis penuh mesin potong CNC untuk sudut (mitre saw) dengan kontrol mikroprosesor Detail: - Penggerak gergaji dengan pengaturan frekuensi, 13-73 rpm - Kontrol mikroprosesor modern - Diameter maksimum mata gergaji hingga 370 mm - Potongan sudut 60° ke kiri dan 45° ke kanan - Laci serpihan besar - Ragum penjepit dengan lengan ganda untuk potongan minim gerinda - Silinder penjepit vertikal - Sistem pendingin otomatis dengan pompa celup elektrik Data teknis: Kapasitas potong pada 90°: Ø 120 mm atau 180 x 100 mm Hnsdpfx Adsw Uftqsqou Motor gergaji 3,0 kW-400 V Tinggi kerja 925 mm Berat sekitar 750 kg Koneksi udara tekan 6 bar Dimensi P x L x T = 3.300 x 1.250 x 1.400 mm Tinggi kerja 900 - 980 mm

Kondisi: sangat baik (bekas), Technical Data: Bandsaws KASTOdisc Machine Type M7 Technical Data Cutting Range 135x80 mm Saw Gear Drive Power 1.3-1.8 kW Cutting Speed 33/60 m/min Saw Feed Hydraulic Manual Saw Blade Dimensions 315x2.5x32 mm Hsdpfx Aoucnuwodqsnu Material Support With Base Frame Machine Dimensions Length/Width 600x800 mm Height 950 mm Machine Weight 270 kg

Kondisi: bekas, Municipal tractor, tractor, implement carrier, make HAKO Model: Hakotrak 2600 DA with snow blade and sweeper First registration: 28.10.1998 Engine power: 20 kW (28 hp) Engine displacement: 1330 cc Maximum speed: 21 km/h - Three-cylinder PERKINS diesel engine - Hydrostatic drive with 3 electrically switchable ranges - Selectable all-wheel drive and differential locks - Cabin heating via cooling water system - Cabin with doors on both sides, removable - Roof can be folded up for summer operation - Rear window can be folded up - Front hydraulics with quick-hitch triangle and hydraulic float position - Hydraulic connections: 2x front, 2x rear - Hydraulic rear hitch - Front PTO, clockwise rotation 2000 rpm (viewed from the vehicle, rotates clockwise) - Rear PTO, clockwise rotation 540 & 1000 rpm - “SPERBER” snow blade with hydraulic angling cylinder and spring-return flaps (width: 1400 mm) - Sweeper with PTO drive and hydraulic angling cylinder (width: 1300 mm) - Removable rear ball hitch (custom-made, mounted on the lift) - Turf tires front: 23 x 10.5 - 12 - Road lighting with 4 front headlights and rear work light - Amber beacon - 1302 operating hours Hodpfxowbvl Se Adqenu Vehicle dimensions: approx. Length 2750 x Width 1245 x Height 2000 mm Vehicle weight without attachments: 1340 kg Permissible total weight: 2500 kg Permissible front axle load: 1000 kg Permissible rear axle load: 1800 kg Front tires: 23 x 8.50-12/4PR Rear tires: 33 x 12.50-15/4PR Permissible trailer weight (braked): 3500 kg Permissible trailer weight (unbraked): 1200 kg The vehicle was only used for property maintenance and winter snow clearing on the company premises. Never used in municipal service. Without salt spreader, it is no longer present and was only used in the beginning. Sweeper is equipped with new brushes and works perfectly. Snow blade is very sturdy and works perfectly. Tractor requires some repair work, the parking brake is not functioning. The service brake is weak; due to the hydrostatic drive, a brake is hardly needed in practice. However, this is criticized by TÜV. The hydrostatic drive needs adjustment at the foot pedal linkage. The vehicle is still registered at the moment but will be sold de-registered.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 315 mm, IMET SIRIO 315 circular saw with 3 m infeed roller conveyor and 3 m electronic stop outfeed side Hnjdpfx Aswzhnlodqou

Kondisi: bekas, Tahun pembuatan: 1996, Eladó: Adige TC 720 csővágó gép + Adige ST 660 sorjátlanító egység – 1996-os évjárat Eladásra kínálunk egy Adige TC 720 automata csővágó gépet a hozzá tartozó Adige ST 660 sorjátlanító egységgel. A gépek 1996-os gyártásúak, a teljes rúdadagoló rendszer a csomag része. A rúdadagoló motorját cserélték, a vezérlés Siemens rendszerrel szerelt. A csomag tartalmaz továbbá új, tartalék gumihajtó kerekeket az adagoló rendszerhez. Műszaki adatok – Adige TC 720: Hedpfx Aewlkiyedqenu • Vágási tartomány (tömör köracél): Ø12 – Ø30 mm • Vágási tartomány (körszelvényű cső): Ø12 – Ø80 mm • Vágási tartomány (négyzet profil): 10 × 10 mm-től 70 × 70 mm-ig • Vágási tartomány (téglalap profil): 15 × 10 mm-től 80 × 70 mm-ig • Minimális vágási hossz: 50 mm • Maximális vágási hossz: kb. 3 000 mm (rúdadagolóval: akár 6 500 mm) • Vágási mód: körfűrész • Vezérlőrendszer: Siemens • Elektromos igény: 400 V / 50 Hz / 3 fázis • Teljesítményfelvétel: kb. 10–12 kW • Méretek: kb. 8000 × 1800 × 2000 mm (H × Sz × M) • Súly: kb. 2 100 kg Adige ST 660 – Sorjátlanító egység: • Levágott csövek és profilok belső és külső sorjátlanításához • Közvetlen együttműködésre tervezve a TC 720 géppel • Méretek: kb. 2000 × 800 × 1600 mm • Súly: kb. 1 700 kg Tartozékok: • Teljes rúdadagoló rendszer – Motor cserélve – Siemens vezérléssel • Új, tartalék gumihajtó kerekek

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Pressta Eisele Emmegi saw Blades: 550 mm EU transport approx. 300 EUR Hedpfx Adog R Ifgeqsnu

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), Number of forming stages: 5, Pressing force: 250 t, Max. wire diameter: 23 mm, Cutting length: 180 mm, Ejector stroke die/punch: 140/60 mm, Tool length/knife diameter: 70/56 mm, Die: 200/110 mm, Punch: 227/90 mm, Weight: 52 t, with enclosure and documentation, inspection possible. Hnjdpfenl El Tsx Adqsu

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, berat keseluruhan: 390 kg, kapasitas pendinginan: 9,5 kW (12,92 hp), Chiller Hnodpfx Adsw D T T Esqou Cooling capacity: 6 kW Weight: 110 kg.

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Mill, Profile Rolling Machine Manufacturer: PEE-WEE Model: P 24 Q Serial No.: LC2403099 Year of manufacture: 2004 Rolling force max.: 24 tons Hnodpjh A S Htofx Adqou Tool diameter max.: 200 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Tool holding length / tool length max.: 180 mm Workpiece diameter max.: 50 mm Roll spindle speed: 22 - 44 - 95 - 190 rpm Hydraulic drive motor power: approx. 3 kW Roll drive motor power: 5.5 kW Electrical connection: 400 Volt, 50 Hz - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated into machine base Installation dimensions (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge Rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed Rolling: Used when thread length is greater than the width of the rolling tools. Through-feed tools have three sections—the entry, the calibration zone, and the exit. Knurling rolls have no pitch and are swiveled at the lead angle of the profile to be rolled. Lead Rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and the swivel angle results in the lead angle in the workpiece.

Tahun pembuatan: 2006, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, The unit is free of refrigerant and fully charged with nitrogen. Supplied with control cabinet. Specification: Airflow: 315 m³/h Hedpfx Adjwu A Duoqsnu Permissible operating pressure: 17 bar The Reisner chiller unit featuring two Bitzer compressors of type KWR W250KS is a reliable and efficient solution for air conditioning and cooling in industrial applications. The system is distinguished by its robust construction and high performance, ensuring consistent and stable temperatures. Equipped with high-performance Bitzer compressors, the chiller delivers efficient cooling capacity while maintaining low energy consumption.

Kondisi: bekas, Tahun pembuatan: 2001, Voltage: 400 V Weight per unit: 490 kg Units in stock: 2 Mitre cut: yes Hnsdsu T Sfbopfx Adqju Maximum cut: 175 mm round

Kondisi: siap digunakan (bekas), Pressing force: 130 t, max. wire diameter: 17 mm, cutting length: 150 mm, die ejector stroke: 125 mm, punch ejector stroke: 58 mm. Tool dimensions (length/diameter): Knife: 80 mm/50 mm, Die: 180 mm/90 mm, Punch: 195 mm/75 mm. Weight without enclosure: 27 t. Available from 26.08.2024. Hjdjr I Abijpfx Adqenu

Kondisi: bekas, Tool steel, round stock, shaft section Shaft, steel block, sawn shaft Cold work tool steel 1.2842 Material section Ø 400 mm x length 165 mm Net weight: approx. 160 kg Material number: 1.2842 Short designation: 90MnCrV8 Cold work tool steel with high hardenability and good dimensional stability during hardening Applications in tool making for cutting, punching, and embossing tools. Rolls and profile rollers, measuring tools, guide rails, paper cutting knives. Delivery condition: Annealed to max. 229 HB Tensile strength in delivery condition: 770 N/mm² Hardening: 790–820 °C Tempering: 220–260 °C Working hardness: 58-62 HRC Soft annealing: 680-720°C - Medium-alloy cold work tool steel Hedpfogmi U Ssx Adqsnu - Oil hardening 4 pieces available, price per piece

Kondisi: bekas, Tahun pembuatan: 2001, tr-d2fb06f8 Hnodpfjlug Tusx Adqou

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), Cooling capacity: 36.2 kW, operating temperature: 50°C, weight: 1.57 t, on-site inspection is possible. Hedpjrick Eefx Adqenu

Kondisi: bekas, Gehrung Cold Circular Saw BERG & SCHMID Type MKS 350 Year of manufacture: approx. 1980 Hodoquzd Ropfx Adqsnu Cutting capacity at 90° round: Ø 110 mm Cutting capacity at 90° rectangle: 160 x 90 mm Cutting capacity at 90° square: 95 x 95 mm Cutting capacity at 45° round: Ø 95 mm Cutting capacity at 45° rectangle: 120 x 90 mm Cutting capacity at 45° square: 80 x 80 mm Maximum saw blade diameter: 350 mm Saw blade speed: 28 and 56 rpm Motor power: approx. 1.8 / 2.5 kW, pole-switchable Mains connection: 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Stepless quick mitre adjustment up to 45° - Material clamp with quick-action eccentric lever - Coolant system with electric pump - Material stop: 350 mm - Saw blade Ø 335 mm fitted Required space (L x W x H): 1250 x 600 x 1200 mm Weight: 240 kg Good condition

Kondisi: bekas, Tahun pembuatan: 1979, de-sn440-gewicht Hnodpfef Dwa Uex Adqju

Kondisi: siap digunakan (bekas), Saw blade diameter: 400 mm, cutting speed: 28 m/min, working height: 1050 mm, power: 5 kW. Cutting capacity at 90°: round material: 130 mm, square material: 120 mm x 120 mm, flat material: 260 mm x 80 mm. Cutting capacity at 45°: round material: 130 mm, square material: 110 mm x 110 mm, flat material: 180 mm x 80 mm. Machine dimensions (L/W/H): approx. 1250 mm x 1250 mm x 2000 mm, weight: approx. 1200 kg. An on-site inspection is possible. Hnsdpsvnub Hsfx Adqju

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Hsdeuz If Nopfx Adqenu Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: bekas, Tahun pembuatan: 1980, Sägeblattdurchmesser 380 mm pneumatische Klemmung ja Masch.-Nr.: 46893 Maschinengewicht ca. 1,3 t +++++ Bitte beachten Sie, dass die Maschine im demontierten und verladebereiten Zustand ist. Aus diesem Grund ist eine Vorführung unter Strom oder die Fertigung eines Videos nicht möglich. Darüber hinaus enthält unsere Anzeige die aussagefähigsten Fotos von bestmöglicher Qualität. Die Zusendung weiterer Bilder ist leider nicht möglich. +++++ Hoded N Sm Depfx Adqonu

Kondisi: bekas, Tahun pembuatan: 1989, Cutting diameter 260 mm Hnodpfopxri Ujx Adqou Serial number 109967 Voltage 380 V Frequency 50 Hz Machine weight approx. 500 kg Mitre

Kondisi: bekas, Tahun pembuatan: 1977, Mitre yes Hodpfxovxlths Adqenu Clamping yes kW mechanical lowering Machine weight approx. 500 kg