Beli Dmg Dmu 60 Monoblock bekas (396)

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Technical Details Hfedpfxoyyv Rls Abvof X-travel: 1040 mm Y-travel: 600 mm Z-travel: 500 mm Control system: Heidenhain iTNC 530 Table size: 1250 x 600 mm Table load capacity: 600 kg Tool holder: SK 40 Spindle speeds: 1 – 8,000 rpm Spindle torque (S1/S6): 140/200 Nm Feed range: 40,000 mm/min Rapid traverse (X and Z): 70 m/min Rapid traverse (Y): 40 m/min Spindle motor (100/40% duty cycle): 13/19 kW Total connected load: 39 kVA Machine weight approx.: 8.9 t Space requirements approx.: — m Additional Information Power-on hours: 70,278 Spindle hours: 23,335 Please note the attached geometry measurement protocol and the tool clamping force measurement. Equipment: - CNC path control Heidenhain iTNC 530 - Electronic handwheel Heidenhain HR 410 - Motor spindle with increased torque - Direct measuring systems in Y and Z axes - Preparation for probe system - Tool changer, 30 positions; tool diameter 100/140 mm, length 300 mm, weight 7 kg - ROTOclear - Production package 2 - Internal coolant supply through the spindle, 20 bar - Coolant system with paper band filter - Cooling device, air blast through spindle center, selectable via M function - Chip conveyor - Bed flushing - Linear drive in X axis - Operating mode 4: Program check with extended manual intervention - Machine documentation Transport dimensions: 4,100 x 2,500 x 3,000 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, kecepatan spindel (maks.): 5.000 rpm, produsen pengendali: SIEMENS, model controller: DMG MORI SLIMline multi-touch, jumlah slot dalam magazin alat: 42, This DMG MORI CLX 350 V3 was manufactured in 2023. It is a universal lathe equipped with driven tools and a C-axis. The machine features a hydraulic three-jaw chuck with a diameter of 210 mm, a 12-position VDI 30 servo tool turret with 12 live tooling stations, and a hollow chuck system offering a maximum bar capacity of 65 mm. This is a great opportunity to acquire a DMG MORI CLX 350 V3 universal lathe. Please contact us for further details on this machine. Additional Equipment • Direct linear measuring system on the X-axis • Chip tray • Hollow clamping device • Hydraulically actuated tailstock via M-function • External electronic handwheel • DMG Mori IoT connector • Machine comes with tool holders, chuck, and jaws Additional Information • Main spindle: A2-6 with AC motor • Hydraulic 3-jaw chuck diameter: 210 mm • Maximum bar capacity: 65 mm Hfjdjyyuv Tepfx Abvjf • Driven tools and C-axis for advanced machining capabilities • 190 spindle hours – machine still under power

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.035 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 560 mm, produsen pengendali: Siemens, model controller: 810D, lebar meja: 600 mm, panjang meja: 1.200 mm, kecepatan spindel (maks.): 10.000 rpm, jam operasional spindle: 7.600 h, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, DMC 1035 V ECO yang sangat bagus dengan kontrol Siemens Tahun pembuatan: 2012 Jam operasional program: 7600 jam SK 40 dengan spindle 10.000 rpm Changer alat 30 posisi Hfodpfsx Dci Tsx Abvjf Paket produksi dengan probe pengukur dan alat pengukur panjang alat di ruang kerja Pendinginan internal Konveyor serpihan Tersedia segera.

Kondisi: baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 920 mm, jarak gerak sumbu Z: 820 mm, produsen pengendali: Heidenhain, model controller: iTNC530, tinggi total: 2.950 mm, panjang total: 6.000 mm, lebar total: 3.800 mm, lebar meja: 900 mm, panjang meja: 3.100 mm, kecepatan rotasi (min.): 20 rpm, kecepatan rotasi (maks.): 18.000 rpm, berat keseluruhan: 25.000 kg, kecepatan spindel (min.): 20 rpm, kecepatan spindel (maks.): 18.000 rpm, pasokan pendingin: 40 batang, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, 5e1d884d Hfsdjyac Tlspfx Abvsf

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, jam operasional: 3.728 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0040001634C, panjang pembubutan: 500 mm, diameter pembubutan: 240 mm, kecepatan spindel (min.): 5.000 rpm, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 210 mm, jarak lintasan sumbu Y: 525 mm, DMG MORI CTX Alpha 500 diproduksi pada tahun 2022. Pusat pembubutan serbaguna ini dilengkapi dengan pengendali Siemens dan LNZ Quick load servo 80S2. Berat: 4.300 kg. Hjdpfx Ajyz S T Sjbvjff Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini.

Kondisi: sangat baik (bekas), Konveyor serbuk untuk DMC 635 V termasuk pompa Hodpfx Abeyz Iicjvoff

Kondisi: bekas, CNC lathe with Y-axis and sub-spindle Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T - Spindle nose: ASA 5 - Main spindle power: 15 kW - Self-centering diameter: 175 mm Hedeqn E U Tjpfx Abvsff - ASA 5 spindle connection - Bar capacity: 52 mm - Turning diameter: 230 mm - Turning length: 500 mm - Max. spindle speed: 5,000 rpm - Number of tool turrets: 1 - Number of tool stations on first turret: 12 - Number of driven tool stations on first turret: 12 - First turret tooling system: VDI 30 - X-axis travel: 160 mm - Y-axis travel: ±32 mm - Z-axis travel: 550 mm - Rapid traverse rate (X/Y/Z): 30 m/min - Sub-spindle: yes - Sub-spindle nose: ASA 5 - Max. sub-spindle speed: 5,000 rpm - Sub-spindle power: 9 kW - Sub-spindle bar capacity: 30 mm - Bar loader model and brand: LNS with single bar tube - Chip conveyor: belt type - Tool presetting: yes - Year: 2000 The machine is in our warehouse in Gussago (BS), under power. Mimu Machine Tools Italy

Kondisi: bekas, Tahun pembuatan: 2005, #de-001 Hsdpfxoyb S Ihj Abvoff

Kondisi: bekas, Tahun pembuatan: 2015,

Kondisi: baik (bekas), Tahun pembuatan: 2017, jam operasional: 8.800 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: NL2561708843, jumlah spindel: 2, CNC control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length (mm): 705 max. Turning diameter (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): ø 740 Bar working capacity (mm): 80 Tool magazines Tool positions: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tool power (kW): 5.5/4.9/4.2 (3 min / 5 min / cont) Rapid traverse (m/min): 30 Main spindle Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5/18.5/15 (25% DC / 50% DC / cont) Max. torque (Nm): 49 Counter spindle Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 11/7.5 (25% DC / cont) Max. torque (Nm): 22 Hodpfx Aoyzxcgobvjff Counter spindle travel (mm): 734 Cooling system Tank capacity (liters): 366 Equipment Chip conveyor Signal beacon Machine operating time: Power-on hours: 19,393 Cutting time: 8,800 Nominal power rating (kVA): 48 Base machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 Illustrated tools, driven tools, and both chucks are not included in the scope of delivery.

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 20.000 h, nomor mesin/kendaraan: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes, and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Year of manufacture: 2012 Spindle hours: 20,000 Hfedoyxpz Iepfx Abvef Max. turning diameter: approx. 390 mm Max. turning length: 1,250 mm Bar capacity: 76 mm (standard) X-axis travel: 300 mm Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12 stations (all stations suitable for driven tools) Speed up to 6,000 rpm, power 11.3 kW Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Hinged belt chip conveyor 20 bar high-pressure coolant system with paper belt filter Subject to prior sale and technical modifications or errors!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 400 mm, jumlah slot dalam magazin alat: 120, tinggi total: 2.900 mm, panjang meja: 400 mm, lebar meja: 400 mm, pasokan pendingin: 40 batang, kecepatan pemakanan sumbu X: 80 m/menit, laju pemakanan gandar Y: 80 m/menit, laju pemakanan sumbu Z: 80 m/menit, pergerakan cepat sumbu Z: 80 m/menit, gerak cepat sumbu X: 80 m/menit, pergeseran cepat sumbu Y: 80 m/menit, kecepatan spindel (maks.): 28.000 rpm, kecepatan spindel (min.): 20 rpm, beban meja: 200 kg, jam operasional spindle: 39.945 h, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Scope of delivery: - HSC 55 machine - 3R-WorkMaster II pallet changer (automation) with all pallets - High-pressure unit / belt filter system (DMG) - Cooling unit (OLAER) Hsdpfxju Ivkgo Abvjff - Chip conveyor Not included in scope of delivery: - Vises - Tool holders Technical data of the machine: - See attached AB Technical data for automation: - Available upon request.

Kondisi: bekas, Tahun pembuatan: 2017, en Hfedpfxsyxpv So Abvsf

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jam operasional: 735 h, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 271 mm, jarak lintasan sumbu Y: 120 mm, jarak gerak sumbu Z: 830 mm, daya motor spindle: 22.000 W, tinggi total: 2.100 mm, lebar total: 1.900 mm, berat keseluruhan: 6.300 kg, produsen pengendali: SIEMENS, model controller: SINUMERIK 840 D sl, panjang produk (maks.): 4.400 mm, diameter benda kerja (maks.): 400 mm, jumlah slot dalam magazin alat: 12, jumlah sumbu: 4, This DMG MORI CLX 450 V4 4-axis CNC turning center was manufactured in 2021. It features a maximum turning diameter of 400 mm and a turning length of 800 mm. The machine is equipped with a Siemens Sinumerik 840D control system and a turret with 12 stations, all with driven tools and a Y-axis. If you are looking for high-quality turning capabilities, consider the DMG MORI CLX 450 V4 CNC lathe we have for sale. Contact us for further details. • Working area: • Max. turning diameter: 400 mm • Max. turning length: 800 mm • Swing over cross slide: 320 mm • Axes: • X, Z, Y, C • C-axis: full interpolation • Main spindle: Hfedpoyxrliefx Abvef • Spindle nose: A8 • Turret and tools: • 12 stations • All stations with driven tools • Performance: • Rapid traverse (X/Y/Z): approx. 24 / 10 / 30 m/min • Machine size: • Power supply: 400 V / 50 Hz • Condition and notes: • Tested before disconnection; very good condition • All functions operate flawlessly (turret, driven tools, handwheel, coolant system) • No mechanical damage detected to bearings, ball screws, linear guides, or drive belts • Geometry within specified manufacturer tolerances: • Turret parallelism to Z-axis: 0.018 mm • Alignment: 0.015 mm / 0.011 mm • Spindle correctly aligned (no tilt) • No evidence of collisions on turret, chuck, or tailstock • Machine is complete with all equipment and options Additional equipment • Tailstock • Chuck • Probe • Chip conveyor Technical Specification Counter Spindle: No Driven Tools: Yes Taper Size: VDI 40

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 7.237 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 510 mm, torsi: 64 Nm, produsen pengendali: Siemens, beban meja: 600 kg, kecepatan rotasi (maks.): 10.000 rpm, berat keseluruhan: 5.600 kg, jam operasional spindle: 4.048 h, jumlah sumbu: 3, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Mesin dalam kondisi sangat baik dan sejauh ini hanya digunakan untuk pembuatan ulir M8 pada aluminium. Oleh karena itu, beban spindle juga tidak pernah benar-benar tinggi. Perlengkapan: • Renishaw PP40 probe benda kerja nirkabel • Pengukuran alat secara taktil • Paket Job Shop untuk Siemens 828 D • Konveyor serpihan • Penukar alat dengan 24 posisi • Dudukan alat untuk SK 40 DIN69871 dan baut penarik DIN69872 Hfjdpfxeyftzqe Abvsf • Luas meja 850x650mm • Daya penggerak 100% ED 9KW • Daya penggerak 40% ED 13KW • Torsi 43Nm • Torsi maksimum 64 Nm • Kecepatan gerak cepat X / Y / Z 24/24/24 m/menit • Pistol semprot pendingin

Kondisi: bekas, NZX1500_description Hsdsyxn I Hepfx Abveff

Kondisi: bekas, DMG_HSC_55_linear Hjdpfxjyxn Efs Abveff

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11790001067, jarak pergerakan sumbu X: 200 mm, jarak lintasan sumbu Y: 200 mm, jarak gerak sumbu Z: 280 mm, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, pergerakan cepat sumbu Z: 40 m/menit, kecepatan pemakanan sumbu X: 40 m/menit, laju pemakanan gandar Y: 40 m/menit, laju pemakanan sumbu Z: 40 m/menit, daya nominal (semu): 40 kVA, produsen pengendali: SIEMENS, model controller: SINUMERIK 840 D, tinggi total: 2.600 mm, panjang total: 4.000 mm, lebar total: 3.000 mm, berat keseluruhan: 6.000 kg, kecepatan spindel (maks.): 42.000 rpm, jumlah slot dalam magazin alat: 24, diameter alat: 40 mm, DMG SAUER ULTRASONIC HSC LINEAR 20 HSC Machining Center - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 100 A - Connection: 40 kVA - Incremental input for X/Y/Z-axis: 0.001 mm - Linear scale resolution X/Y/Z-axis: 0.001 mm - Position tolerance in X/Y/Z-axis with direct measuring system: 0.005 mm - Tool holder: HSK-32 E - Max. tool length from spindle nose: 200 mm - Max. tool weight for automatic tool change: 1 kg, with total tool weight in magazine: 24 kg - NC rotary table with swiveling axis - C-axis clamping surface: 190 mm diameter - Rotary range: 360° - Rotary table speed: 150 rpm - A-axis swivel range: -5/+130° - Load capacity: max. 10 kg - Including the tool holders visible in the tool magazine photos - Additionally, a separate external tool changer system (30 positions) by manufacturer ROBOWORKER, type: LM 100 Hodpfxjyxckve Abvoff Note: The machine can be transported on a standard, conventional truck! Note: The item is available immediately! FCA D-73235 Weilheim Teck – loaded onto truck

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, jarak pergerakan sumbu X: 398 mm, jarak gerak sumbu Z: 214 mm, tinggi total: 1.800 mm, lebar total: 1.900 mm, panjang produk (maks.): 2.200 mm, jumlah sumbu: 2, en Hfodpfx Aboyxgg Isvef

Kondisi: bekas, Tahun pembuatan: 2007, produsen pengendali: Heidenhain, model controller: iTNC 530, de-hu-20240620-1 Hodpfx Aboyw Dngovjff

Kondisi: bekas, Tahun pembuatan: 2019, de-hu-1 Hedpfsyw Titox Abvsff

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 250 mm, jarak lintasan sumbu Y: 40 mm, jarak gerak sumbu Z: 635 mm, daya motor spindle: 21.000 W, tinggi total: 1.770 mm, lebar total: 1.715 mm, berat keseluruhan: 5.300 kg, panjang produk (maks.): 4.300 mm, jumlah sumbu: 4, This 4-axis DMG CTX410 was manufactured in 2008. It features a maximum turning length of 600 mm and a turning diameter of 320 mm. The machine is equipped with a powerful spindle reaching speeds of up to 5,000 rpm, as well as a 12-position turret for increased productivity. If you are looking for a high-quality lathe, you should consider the DMG CTX410 horizontal lathe that we have for sale. Please contact us for further details. • Rapid traverse (X/Y/Z): 24 / 10 / 30 m/min • Main spindle: • Spindle bore: 87 mm • Bar capacity: 65 / 75 mm • Maximum torque: 240 Nm • C-axis: Hfedpfjyw Rb Hox Abvsf • Speed: 200 rpm • Torque: 200 Nm • Indexing accuracy: 0.04° • Turret: • Stations: 12 • Toolholder: VDI 30 • Driven tools: Yes (all 12 positions) • Speed of driven tools: up to 4,000 rpm • Turning capacity: • Maximum turning length: 600 mm • Maximum turning diameter: 320 mm • Equipment: tailstock • Electrical: • Total power consumption: 44 kVA • Voltage: 400 V • Frequency: 50 Hz Technical Specification Counter Spindle: No Driven Tools: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 14.435 h, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: HEIDENHAIN, model controller: TNC 620, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 13.000 W, jumlah slot dalam magazin alat: 60, jumlah sumbu: 5, This 5-axis DMG MORI CMX 50 U + PH150 was manufactured in 2019. It features an X-axis travel of 500 mm, a Y-axis travel of 450 mm, and a Z-axis travel of 400 mm. The machine is equipped with a powerful spindle delivering 12,000 rpm and a tool magazine for 60 tools. It comes with a PH150 automation system. If you are looking for high-quality machining capabilities, consider the vertical machining center DMG MORI CMX 50 U + PH150 that we have for sale. Contact us for further details. • B-axis: -5/+110° • C-axis: 360° • Spindle torque (100%/40%): 57/83 Nm • Rapid traverse: 30 m/min • Tool magazine: 60 tools with double gripper • Direct measurement on X/Y/Z axes • Renishaw tool and workpiece probe • Tank capacity: 250 liters • 3D-Quickset • Electronic handwheel Additional equipment: • Chip conveyor • DMG MORI PH 150 pallet system with 6 pallets (398 x 398 mm, load capacity 150 kg) Hodpfxjyw Ivze Abvsff • Erowa MTS clamping system • 2 identical machines available! Technical Specification Taper Size SK 40

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, I have for sale a CNC LATHE GILDEMEISTER CTX 410 V3 with driven tools TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V3 Control System: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2006 The machine is fully equipped with fixed and driven tool holders Machine specifications: Hsdpoyy S R Usfx Abvjff - Turret: 12 tool stations, VDI-30 holders (all positions driven) - Max spindle speed: 5000 rpm - C axis - Driven tools - Tailstock - Max turning diameter (X axis): 320 mm - Max turning length (Z axis): 600 mm - Coolant system - Hydraulic collet chuck on main spindle (can be replaced with 3-jaw chuck) - Through spindle (bore diameter: 66 mm) - Finished part catcher - Chip conveyor - Full programming manual - Mechanical and electrical documentation - Machine weight: 5 tons - Loading included in the price The machine has undergone a complete inspection and is 100% operational. It is connected and ready for work. Stal-Com company has been involved in sales, service, and training on CNC machines from the DMG group for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo thorough technical inspections. In addition to clients from Poland, our customers include buyers from all over Europe and parts of Asia. Each machine can be inspected during production, as we also offer machining services. After purchasing a machine from us, we provide staff training and are also able to set up part production at the customer's site. We collaborate on an ongoing basis with many companies, delivering additional machine tools as part of long-term partnerships.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, We offer you: Manufacturer: DMG Mori Model: CLX 350 V6 Year of manufacture: 2022 Control: DMG Mori SLIMline Siemens Operate Technical data: Max. turning diameter: 320 mm Distance between centers: 780 mm Bar capacity: max. 65 mm Travel paths: x-axis travel: 185 mm y-axis travel: +/- 40 mm z-axis travel: 465 mm Main spindle: Spindle speed: 5,000 rpm Drive power: 11/16.5 kW Sub-spindle: Spindle speed: 5,000 rpm Drive power: 12.6/16.2 kW Number of tool stations: 12 positions Tool holder: VDI 30 Operating hours: approx. 1,760 h Spindle hours: approx. 1,130 h Technical features & accessories: - Direct path measuring system for x and y axes - External electronic handwheel - Bar package & interface, includes: - Workpiece pick-off device for parts up to D65 x 200 mm, max. workpiece weight 3 kg - Interface for bar feeder - Chip conveyor with right-hand discharge - 4-color signal lamp - Collet chuck, manufacturer Hainbuch SPANNTOP nova combi Hfjdpfx Abjyzbl Revef - Differential pressure clamping for sub-spindle - External chuck flushing for sub-spindle - Automatic workpiece ejector, sub-spindle with internal coolant supply for chuck flushing - Hydraulic 3-jaw chuck, manufacturer SMW BB-D 175 for sub-spindle - Coolant system 5 – 20 bar, includes: - High-pressure pump - Double cartridge filter for coolant - Coolant spray gun 5 bar - Preparation for oil mist separator - Manual tool measuring device - Automatic bar feeder, manufacturer IEMCA KID80/16 - Partial belt conveyor - Technology cycle “Alternating Speed” - Technology cycle “y-Axis parting” - Technology cycle “Easy Tool Monitoring 2.0” Accessories, pictured tools and clamping devices are only included in the scope of supply if specified in the additional information. Technical data and specifications subject to change and error, prior sale reserved!