Beli Doppstadt bekas (83)

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 6.800 h, Fungsionalitas: belum diuji, Basic Package AK560: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system including ABS and lighting according to EC directive 50 mm EC towing eye including slip-on shoe Bodpfxoxx Rvke Af Secu Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash protection (inner and side mudguards) Permissible gross weight: 19,000 kg Mercedes/MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT IV emissions standard Load-dependent control of material feed including automatic reversing of the scraper floor Fuel tank: 450 liters Feed roller: length 1,690 mm, diameter 510 mm, featuring bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip “Streusel” Centrally located lubrication bars Electric pump for cylinder functions (e.g. lifting/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, disengaging the drive) when the engine is switched off 24 V electrical control system Separate control box at the rear of the machine Hydraulically folding fine-shredding basket (mesh size 30 - 280 mm, gradations on request) including rear flap Scraper floor with 32 slats Complete radio remote control Preparation for drive system Acoustic start-up warning Paintwork: RAL2011 deep orange Optional Equipment: Special paintwork in DB6841 MB-Trac Green Hydraulic drive system Fuel tank 600 l Fine-shredding basket Rear conveyor 4 m, belt width 1800 mm Separate drive for feed roller and scraper floor Reinforcement plates on both sides of the feed hopper for side walls Impact plate with strike bar and additional tooth row Delivery date upon request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, jam operasional: 135 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 24.740 kg, lebar transportasi: 2.540 mm, panjang transportasi: 9.141 mm, tinggi transportasi: 3.604 mm, daya: 260 kW (353,50 hp), Equipment: Basic Package Inventhor Type 6 - Load-sensing system - Fuel tank: 500 liters - Longitudinal conveyor: conveyor length 2,900 mm, conveyor width 800 mm - Centrally arranged lubrication strips - 24V electric control – additional electric pump for operating the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side fiberglass (GRP) maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear section - Hydraulically reversible fan - Three-sided loading protection - Folding hopper Bcodpfx Aexd T Hcof Ssu - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional Equipment: - Drive train 260 kW – EV - 3-axle drawbar chassis unit - Size L shredding system – 20 teeth - Size L limiter - Auxiliary hydraulic connections 35–80 l/min - Hydraulic drive - 350 mm hopper extension, watering device on both sides - 7 m rear conveyor - Overbelt neodymium magnet - Frame for 7 m overbelt magnet Delivery date by arrangement

Kondisi: baik (bekas), Tahun pembuatan: 2023, jam operasional: 60 h, Fungsionalitas: berfungsi sepenuhnya, Equipment: Standard Package Methor "Hooklift" - 24V electric control system - Maintenance-friendly engine compartment with LED lighting - Folding hopper with position sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paintwork: RAL 2011 deep orange Bcsdpfxsvrw Tme Af Sou Additional Equipment: Hooklift according to DIN 30722-1 (Germany) Size L shredding system (8 teeth) Three-phase motor 200 kW EUROPE + electric pump Large hooklift radio control unit Discharge conveyor 6.9 m Framework for overband magnet Overband magnet Additional hydraulic connection 70 l/min

Kondisi: baik (bekas), Tahun pembuatan: 2004, jam operasional: 15.660 h, Fungsionalitas: berfungsi sepenuhnya, warna: oranye, Dijual shredder slow speed + chipper high speed Doppstadt DZ 750 Kombi. Mesin tidak pernah mengalami kecelakaan. - Tahun produksi: 12.2004 - Mesin diesel Mercedes-Benz - Jam kerja: 15.660 jam - Berat: 46 ton - Separator magnetik - Bisa menggunakan berbagai saringan penghancur - Mesin sudah diservis - Kondisi ban 70% - Ukuran ban: 385/65R22.5 - Pengoperasian mudah Mesin masih aktif digunakan, silakan hubungi untuk informasi lebih lanjut. Bcjdpfxeygr Tns Af Sju

Kondisi: baik (bekas), Tahun pembuatan: 2020, jam operasional: 590 h, Fungsionalitas: belum diuji, en-1 Bcodpfx Afevnq Rke Sou

Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 6.777 h, Fungsionalitas: berfungsi sepenuhnya, Base configuration DW 3060-F "Büffel" (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting shoe Hydraulically adjustable support foot Splash guards (inner and side fenders) Permissible total weight 25,000 kg Tires 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, compliant with EUROMOT IV emissions standard Reinforced planetary gearbox 380 kW Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Rear conveyor belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged wear rails 24 V electric control Bedpfxexx Tfzo Af Sscu Roller reversal via electric motor when main engine stopped Automatically reversible fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydrostatic travel drive SHREDDING SYSTEM SIZE "L" 600/4 COMPLETE Auxiliary hydraulic connection 70 l/min Radio remote control Comb extension Size "L" Limiter Mount adapter for comb extension Limiter Size "L" Overband magnet for rear conveyor Frame for overband magnet Moisturization unit

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 2.380 h, Fungsionalitas: berfungsi sepenuhnya, AK 315 Basic Package: Central axle trailer chassis with 2 axles, 80 km/h road approval Brake system incl. EBS and lighting according to EC Directive Tyres: 385/65 R22.5 50 mm EC towing eye incl. slip-on coupling shoe Hydraulically adjustable support leg Splash guards (mudguards inside and side panels) Permissible total weight: 16,000 kg MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, compliant with EUROMOT V emission standard Load-dependent feed control incl. automatic scraper floor reversal Hydraulically folding green waste screen basket with tailgate Impact plate with teeth Fuel tank 300 litres Bcodpfjxx Sdpjx Af Sju Feed roller: length 1,420 mm, diameter 510 mm, with mounted tooth segments Double-row flail drum with 16 free-swinging cast steel flail holders, replaceable flail tips, and 28 fixed ripping teeth Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for actuation of cylinder functions (e.g., raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off 24-V electrical control Separate control box at the rear of the machine Scraper floor with 29 slats Chain drive for feed roller and scraper floor Advanced radio remote control with 2 foot switches Acoustic start-up warning Rear conveyor: 6 m, 1,500 mm wide with anti-magnetic centre section Reinforcement plates (Hardox) on both sides of the loading hopper for the side walls (loading edge) Drive preparation Fire extinguisher Doppstadt Telematics System Paint finish: RAL2011 deep orange Additional equipment: Hydrostatic drive Upgraded radio remote control with foot switch Flail tips “Bear’s Paw” Fine-shredding basket Water spray system Lighting package: engine compartment and rear conveyor Delivery date upon agreement

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 2.798 h, Fungsionalitas: berfungsi sepenuhnya, Base Package AK 640 SA: 3-axle semi-trailer chassis, road approval for 80 km/h Braking system incl. ABS and lighting according to EU directive Tyres: 385/65 R22.5 Permissible total weight: 32,000 kg Hydraulically adjustable support legs Splash guards (inner and side mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with fitted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip “Streusel plus” Impact plate with teeth Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raise/lower support legs and open/close rear basket, fold/unfold rear belt, release drive) when engine is off 24 V electrical controls Separate control box at rear of machine Hydraulically folding fine shredding basket “Multimesh” (mesh size 30 – 280 mm, gradations on request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic centre section Lower belt: belt length 3,800 mm, belt width 1,400 mm Engine compartment protection plate (material: Hardox) Water spray system for external water connection Scraper floor with 71 bars Wear protection in drum area Reinforcement plates on feed hopper (wear-resistant steel), both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Optional Equipment: Hydrostatic drive Bcodpfxexx Rrrj Af Seu Fine shredding basket Scraper floor chain lubrication Lighting package: engine compartment and rear conveyor LED lighting package for scraper floor and feed Flail tips “Bear Paw” Delivery date to be arranged Available from 04/2026

Kondisi: baik (bekas), Tahun pembuatan: 2022, jam operasional: 600 h, Fungsionalitas: belum diuji, Equipment: Basic Methor Kette package Bcodpsvrz Rvsfx Af Ssu without shredding system - Track undercarriage including 2 travel speeds - 400mm triple-bar tracked chain - Auxiliary hydraulic connection 70 l/min - 24V electric control system - Full-size radio remote control - Maintenance-friendly engine compartment with LED lighting - Folding hopper with position sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special Equipment: Shredding system Size L (8 teeth) Cat C7.1 engine, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Watering system

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 119 h, Fungsionalitas: berfungsi sepenuhnya, Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: Belt length 2,900 mm, belt width 800 mm Centrally positioned wear strips 24 V electric control – additional electric pump for operation of the following functions when the engine is switched off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP service doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt Telematic System Paint finish: RAL2011 deep orange Additional Equipment: Powertrain 260 kW – electric drive 3-axle drawbar chassis unit Bjdpjxx Sbnefx Af Secu Shredding system Size L – 20 teeth Auxiliary hydraulic connection 35 – 80 l/min Hydraulic drive Hopper extension 350 mm, irrigation on both sides Rear conveyor 7 m Overband magnet – neodymium Frame for overband magnet 7 m Delivery date to be agreed

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 4.826 h, en-GB-1 Bcsdpfx Asvnmldsf Ssu

Kondisi: baik (bekas), Tahun pembuatan: 2022, jam operasional: 2.100 h, Fungsionalitas: berfungsi sepenuhnya, de-en Bcsdpfx Afewnfwqo Sju

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 3.300 h, Fungsionalitas: berfungsi sepenuhnya, Base Package AK 640 SA Mercedes / MTU Diesel Engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system including ABS and lighting according to EC directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (inner and side fenders) Mercedes / MTU Diesel Engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control including automatic scraper floor reversal Separate drive for intake roller and scraper floor (twin drive) Fuel tank 2 x 450 liters Intake roller: Length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged lubrication bars Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, disengaging travel drive) when engine is off 24-V electrical control system Separate control box at rear of machine Hydraulically folding fine shredding basket Multimesh (mesh size between 30 - 280 mm, gradation on request) including one-piece rear flap Rear conveyor: Belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, includes antimagnetic centre section Underside conveyor: Belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates at feed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt Telematic System Paint finish: RAL 2011 deep orange Additional Equipment: Hydrostatic travel drive Scraper floor chain lubrication NEODYMIUM overband magnet Bcedpoxx Tigjfx Af Sju Frame for overband magnet Central lubrication system Engine compartment protection plate Lighting package: engine compartment and rear conveyor Spraying system Delivery date to be agreed Available from 06/2026

Kondisi: baik (bekas), Tahun pembuatan: 2020, jam operasional: 881 h, Fungsionalitas: belum diuji, Perlengkapan: Paket dasar Methor dengan trek rantai Bcodpjvnmmzsfx Af Sju Sasis berkaki rantai termasuk 2 kecepatan berjalan Rantai bawah 400 mm dengan 3 sirip Sambungan hidrolik tambahan 70 l/menit Kontrol elektrik 24-V Remote control nirkabel besar lengkap Ruang mesin ramah perawatan dengan lampu LED Hopper lipat dengan sensor posisi dan kontrol otomatis Kipas dapat di-reverse secara hidrolik Peringatan mulai berbunyi Tangki bahan bakar 300 liter Pengecatan: RAL 2011 oranye tua Perlengkapan tambahan: Mesin Cat C7.1, 205 kW Konveyor belakang 6,9 m Rangka untuk magnet overband Magnet overband Sistem pengganti cepat untuk rol Sistem pengganti cepat untuk rol Sistem penyiraman Penerangan kerja LED Pompa listrik tambahan untuk pengoperasian saat mesin mati Pemadam api GN 9 A-3 DIN EN 3

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 3.000 h, Fungsionalitas: berfungsi sepenuhnya, en: Basic Package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally arranged wear strips 24-V electric control – additional electric pump for the activation of the following functions when the engine is off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large lateral GRP service doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Optional equipment: Drivetrain 310 kW - EV 3-axle drawbar chassis unit Comminution system Size L-C3 600/4-30Z Size L limiter Additional hydraulic connections 35–80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet neodymium Frame for overband magnet 7 m Central lubrication system Special paint in RAL Delivery date upon agreement fr: Pack de base Inventhor 6 : Système load-sensing Réservoir de carburant 500 litres Convoyeur longitudinal : longueur de bande 2 900 mm, largeur de bande 800 mm Lattes d’usure centrales Commande électrique 24 V – pompe électrique supplémentaire pour l’activation des fonctions suivantes moteur à l’arrêt : Relevage/abaissement/coudage du convoyeur arrière, ouverture/fermeture du clapet peigne, ouverture/fermeture du peigne, relevage/abaissement de la trémie rabattable Télécommande complète Bodpfx Aexx N T Ief Secu Grandes portes de maintenance latérales en PRV Compartiment moteur facile d’accès Kit d’éclairage LED : compartiment moteur et arrière Ventilateur hydraulique réversible Protection de chargement sur trois côtés Trémie rabattable Extincteur Échelle de maintenance Boîte à outils Avertisseur sonore de démarrage Système télématique Doppstadt Peinture : RAL2011 orange profond Équipements optionnels : Chaîne cinématique 310 kW - EV Ensemble de train roulant à timon à 3 essieux Système de broyage taille L-C3 600/4-30Z Limiteur taille L Prises hydrauliques supplémentaires 35–80 l/min Entraînement hydraulique Rehausse de trémie 350 mm, arrosage à gauche Convoyeur arrière 7 m Séparateur magnétique à aimant néodyme Châssis pour séparateur magnétique 7 m Système de lubrification centralisé Peinture spéciale RAL Délai de livraison à convenir es: Paquete básico Inventhor 6: Sistema Load-Sensing Depósito de combustible de 500 litros Cinta longitudinal: longitud 2.900 mm, ancho 800 mm Lamas de desgaste centralizadas Control eléctrico de 24 V – bomba eléctrica adicional para el accionamiento de las siguientes funciones con el motor parado: Elevar/bajar/plegar cinta trasera, abrir/cerrar compuerta de peine, abrir/cerrar peine, subir/bajar tolva abatible Control remoto completo Grandes puertas de mantenimiento laterales de PRFV Compartimento del motor de fácil acceso para mantenimiento Paquete de iluminación LED: motor y zona trasera Ventilador hidráulico reversible Protección de carga por tres lados Tolva abatible Extintor Escalera para mantenimiento Caja de herramientas Avisador acústico de arranque Sistema telemático Doppstadt Pintura: RAL2011 naranja intenso Equipamiento adicional: Transmisión 310 kW - EV Unidad de chasis con lanza de tiro de 3 ejes Sistema de trituración tamaño L-C3 600/4-30Z Limitador tamaño L Conexiones hidráulicas adicionales 35–8

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 200 h, Fungsionalitas: belum diuji, Equipment: Basic Package Methor Track Tracked undercarriage incl. 2 travel speeds Undercarriage track 400mm, triple grouser Auxiliary hydraulic connection 70 l/min 24 V electric control Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan Acoustic start-up warning Fuel tank 300 liters Paint finish: RAL 2011 deep orange Additional Equipment: Rubber quick-change pads Engine Cat C7.1, 205 kW Rear discharge conveyor 6.9 m Shredding system Size L (8 teeth) Frame for overband magnet Overband magnet Quick-change roller system on the roller Quick-change roller system on the machine Water spray system LED work lighting Additional electric pump for operation in case of engine shutdown Bodpevnq Trjfx Af Secu

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 1.150 h, Fungsionalitas: berfungsi sepenuhnya, Basic Package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor belt: belt length 2,900 mm, belt width 800 mm Centrally positioned wear strips 24V electric control system – additional electric pump for operating the following functions when the engine is off: raise/lower/fold rear conveyor, open/close comb gate, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP service doors Service-friendly engine compartment LED lighting package: engine compartment and rear section Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Bedpfx Afexx N Dgo Socu Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional Equipment: 260 kW - EV powertrain 2-axle semi-trailer chassis unit Shredding system Size L - 20 teeth Size L limiter Auxiliary hydraulic ports 35 - 80 l/min Hydrostatic drive Hopper extension 350 mm, watering system on both sides Size L hopper wedge with NM brush Rear conveyor 7 m Neodymium over-belt magnet Frame for 7 m over-belt magnet Delivery date by arrangement

Tahun pembuatan: 2016, Kondisi: perlu perbaikan (bekas), Fungsionalitas: belum diuji, HS 800 Basic Package Spiral Shaft Screen Deck AA209-150 Special Paint Finish: Green Bcodpevm Uqrefx Af Ssu

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), Fungsionalitas: belum diuji, Basic package Selector 800 Lower conveyor BB 1350 mm AA 6.4 m Bodpfxjvm Upnj Af Sjcu -profiled belt- SPIRAL SHAFT SCREEN DECK AA254-150 – 16 shafts

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 6.031 h, Fungsionalitas: berfungsi sepenuhnya, Basic package SM620 Plus: Central axle trailer chassis with 2 axles, 80 km/h EU road approval Braking system incl. ABS and lighting according to EC directive 50 mm EC towing eye, incl. slip-on shoe Bcsdpfxoxx R Rhj Af Sju Hydraulically adjustable support legs, both sides at the front and rear right Splash guards (inner and side mudguards) Tyres 435/50 R19.5 Permissible total weight 19,000 kg Deutz diesel engine TCD 3.6 L4, 85 kW at 1,800 rpm, complies with emissions standard EUROMOT TIER IV Final Hydraulically reversible fan for water and oil cooler Complete engine unit can be swung out Fuel tank 300 litres Feed hopper with 5.0 m³ capacity Prepared for stone grid Hydraulically foldable side conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulically foldable rear conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulic support cylinder between side and rear conveyors Emergency stop switch at side and rear conveyors Load-dependent material feed from apron conveyor to screening drum Continuously variable screening drum speed from 0 - 20 rpm Continuously variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: emergency stop switch, fold in/out rear conveyor, fold in/out side conveyor, kink side conveyor and load control +/-, switch automatic mode on/off From the machine control panel: fold in/out side conveyor Hydraulically foldable cleaning brush with individual brush elements and spring tines Centrally arranged wear strips 24 V electric control Rear underrun protection Front side impact protection (reinforced version) and rear side impact protection on both sides Hydraulic quick coupling between rear conveyor and machine Acoustic start-up warning, door monitoring Doppstadt telematics system Paint finish: RAL2011 deep orange Basic version without screening drum Optional equipment: Flow divider for rear conveyor Delivery date by arrangement

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2008, jam operasional: 3.119 h, Doppstadt DH 910 Panther - Tahun pembuatan: 2008 - Mesin: Mercedes Benz - Jam operasi: 3119 - Remote control - Berat: 25.000 kg Mesin telah direkondisi total dan siap pakai segera. Bcjdpfx Aeygnnbsf Ssu

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2014, berat keseluruhan: 25.000 kg, Doppstadt DW 3060 Büffel Type C - Year of manufacture: 08/2014 - Operating hours: 7,275 - Engine: Mercedes Benz, 430 HP - AdBlue Bcsdpfxeygnk As Af Sou - Roller: 21 teeth - Overband magnet - Remote control - Hydraulic drive (self-propelled) The machine has been overhauled and is immediately available.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2008, Doppstadt DZ 750 Kombi - Tahun pembuatan 02/2008 - Roller pre-shredder 21 gigi - 2 x magnet overband - Pelumasan sentral - Remote control - Mesin Mercedes Benz 480 kW (652 HP) pada 1.900 rpm - Berat 46.000 kg - Rotor penghancur akhir dengan 36 palu berayun bebas - Keranjang ayak 120 mm (keranjang ayak lain tersedia) Bedpfx Afoygnbbo Sscu - Konveyor belakang 7 m - Rotor dengan 36 palu Mesin telah direkondisi dan siap pakai.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2005, jam operasional: 6.149 h, berat keseluruhan: 19.000 kg, Doppstadt DW 2560 Buffalo - Year of manufacture: 2005 - Operating hours: 6,149 - Engine: Mercedes Benz 354 HP - Roller: 17 teeth - Overband magnet Bedpfx Ajygnaksf Secu - Remote control - Hydraulic drive (self-propelled) Machine has been overhauled and is available immediately.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2018, jam operasional: 3.317 h, berat keseluruhan: 19.000 kg, daya: 389,81 kW (529,99 hp), Mobile Shredding Plant DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Mobile up to 80 km/h Fine shredding basket (hole pattern as per agreement) Bcodpfx Afjt Egdds Sju Rear discharge conveyor with magnetic pulley Twin drive (separate drives for scraper floor and feed roller) Hydraulic drive (creep speed) Remote control