Beli Durma Hap 30120 bekas (206)

Kondisi: baru, Bending: 10.0 mmSheet length: 2550 mmSheet thickness: 13.0 mmTotal power requirement: 15.0 kWGross weight approx.: 10.6 tDimensions (LxWxH): 4.76x1.66x1.59 m Image similar Bending capacity: 13.0 mm • at 3x top roll diameter. Initial pre-bending: 10.0 mm • at 1.5x top roll diameter. Top roll diameter: 270 mm Bottom roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 1,155 mm • Fully hydraulic drive for top and bottom rolls via planetary gearbox • Digital display for side roll positions • Hydraulic drop end bearing • Infinitely variable rolling speed • Cone bending device • Hardened rolls • Hydraulic positioning of side rolls synchronized by PLC • Hydraulic positioning of bottom roll by torsion shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Machine and equipment conform to CE regulations For catalog, see the following link: Important notes for cone bending: • The max. sheet thickness is 50% of the rated capacity • The cone length may be max. 30% or must be more than 60% of the roll length Tsdpfx Ajd Ab H Ijf Sod • Hardened rolls are recommended

Kondisi: bekas, Tahun pembuatan: 2009, ketebalan pelat baja (maks.): 4 mm, penahan belakang: 750 mm, panjang pemotongan (maks.): 2.550 mm, Motorized Guillotine Shear Make: Durma Model: MS 2500 x 4mm Year: 2009 Technical Specifications Manufacturer: DURMA Model: MS 2504 Year of Manufacture: 2009 Sheet Thickness: 4 mm Cutting Length: 2,550 mm Cutting Angle: 1°30‘ Strokes/Min.: 42 Motor Output: 7.5 kW Back Gauge: 750 mm Dimensions: L 3.15 x W 1.75 (plus support arms 0.6 m) x H 1.33 m Weight: 3.3 t Equipment - NC-controlled back gauge, 750 mm - Support arms - Angle stop - Manual blade gap adjustment Todpfxjv Rntzs Af Sed - Foot switch - Operating manual All information subject to change and without guarantee. A demonstration is possible at any time in our showroom.

Tahun pembuatan: 2024, Kondisi: baru, *Image similar* Tjdpfxehk Ngco Af Ssd Technical specifications: Sheet length: 2,050 mm Sheet thickness: 3 mm Total power requirement: 3 kW Dimensions (LxWxH): 2,400 x 1,350 x 1,200 mm

Kondisi: baru, Bending: 13.0 mm; Sheet length: 3100 mm; Sheet thickness: 16.0 mm; Total connected load: 17.5 kW; Weight approx.: 11.6 t; Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roller diameter Pre-bending: 13.0 mm » at 1.5x top roller diameter Top roller diameter: 300 mm Bottom roller diameter: 270 mm Side roller diameter: 210 mm Tjdpfx Afjd Auaco Sod Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of top and bottom rollers via planetary gearbox • Digital display for side roller positions • Hydraulic drop-end bearing • Cone bending device • Hardened rollers • Hydraulic adjustment of side rollers, synchronized via PLC • Hydraulic adjustment of bottom roller via torsion bar • Pressure-adjustable bottom roller • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Important notes for cone rolling: • The max. sheet thickness is 50% of nominal capacity • The cone length may be max. 30% or must be more than 60% of the roller length • Hardened rollers are recommended

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, en-discover-the-powerful-durma-press-brake-in-our-demonstration- center-in-saerbeck-as-a-manufacturer-we-offer-you-maximum-precisi on-and-efficiency-with-a-capacity-of-3050mm-length-and-175-tons-b enefit-from-our-comprehensive-all-in-one-service-we-take-care-of- transport-setup-commissioning-and-provide-a-one-year-warranty-as- well-as-fast-and-reliable-support-visit-us-and-see-for-yourself-t he-quality-and-versatility-of-this-premium-machine-standard-equip ment-capacity-length-ton-3050mm-175t-installation-height-530mm-th roat-depth-450mm-stroke-265mm-servo-drive-y1-y2-x-3-axes-control- unit-dt-15-manuel-f-akas-fpsc-safety-system-ce-fiessler-akas-serv o-motor-backgauge-linear-guide-ball-screw-system-manual-crowning- european-tool-holder-movable-front-arms-options-control-unit-dele m-69s-3d-control-motorized-crowning-6-axes-x650mm-y1-y2-x-r-z1-z2 -6-axis-cnc-press-brake-bottom-tool-european-m460r85-top-tool-eur opean-p13575r08 Tedpfx Ajtr Dk Ejf Sed

Tahun pembuatan: 2024, Kondisi: baru, The DA-69T control system offers both 2D and 3D programming, including automatic calculation of the bending sequence and collision detection. Full 3D machine setup supports multiple tool stations and provides immediate feedback regarding product feasibility and handling. Delem-69T features: • 3D and 2D graphical touchscreen programming • 3D visualization during simulation and production • 17-inch high-resolution TFT color display • Complete Windows application suite • Compatible with Delem Modusys (modular scalability and adaptability) • USB and peripheral interface • Open system architecture • Sensor bending and correction interface • Profile-T3D offline software • Significant contribution to environmental protection; future generations will benefit from reduced climate change and greenhouse effects. AD-S 30175 with Y1, Y2, X, and R axis Bending force: 175 tons Bending length: 3050 mm Distance between uprights: 2600 mm Rapid approach speed: 120 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec Tool passage and penetration depth installation height: 30 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 pcs Backgauge fingers: 2 pcs Press force and speed of press brake X-axis: 500 mm/sec X-axis travel distance: 650 mm Max. R-axis speed: 350 mm/sec R-axis travel distance: 250 mm Motor power: 18.5 kW Hydraulic tank capacity: 250 liters Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight approx.: 11,500 kg Control: Delem-69T Options: Y1, Y2, X, R (4-axis), X=650 mm X, R CNC control - Cybelec ModEva 19T DBEND 3D CAD/CAM import & simulation software CNC motorized crowning Movable front support arms with T-slot, clip stop, and full-length guide Backgauge: Siemens DC servo motorized, linear guide, and ball screw system Protective cover CE standard with manual Fiessler AKAS II M - FPSC-B-C (SAFETY PLC) Wila hydraulic top - NSCL-I-HC/UPB - PRO - Max load 180 t/m, powerpack required Wila hydraulic bottom - NSCR-I-HC-CNC/UPB - PRO - Max load 200 t/m, powerpack required Powerpack for hydraulic clamping DAM (Durma angle measurement system) 2 YEARS WARRANTY The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Todpsd Tpadefx Af Sed Additional machines are available for demonstration in Staufenberg. Further information available upon request.

Tahun pembuatan: 2024, Kondisi: baru, MRB-S Series Technical Data (see images) Standard Equipment - CE certification - Conical bending - Motorized rear roll - Additional control panel for upper and lower rolls, operable with mobile chassis - SAE 1050 steel rolls - Induction-hardened rolls - Stress-relieved steel construction - Support stands and brake system for precise bending (for 2.5 and 3m machines) - Digital display - Motorized rear roll with feeding Optional Equipment - Motorized bottom roll mounting - Ground rolls - Extended rolls for profile bending - Special rolls for profile bending - Special packaging for international shipments MRB Series: Technical Data (see images) Standard Equipment - CE standard - Digital display - Conical bending - Motorized rear roll with feeding - Additional control panel for upper and lower rolls, operable with mobile chassis - SAE 1050 steel rolls Tsdpfxefin E Dj Af Sod - Induction-hardened rolls - Stress-relieved steel construction - Brake system for precise bending Optional Equipment - Motorized bottom roll with feeding - Polished rolls - Extended rolls for profile bending - Special rolls for profile bending - Special packaging for international shipments Everything can be configured according to your requirements, with very short production and delivery times. Further information is available upon request. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal processing machines worldwide and, with its headquarters in Turkey, has established itself as one of the world’s largest manufacturers of sheet metal machinery. With over 60 years of experience in research and production of sheet metal processing machines, producing 8,000 machines annually in three technologically advanced production facilities covering a total of 150,000m², the Durmazlar Group and its DURMA machines are today among the internationally recognized producers in the sector, distributing products to 120 countries. With our branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an essential part of the Central Hessen region. Here, we are your direct contact on behalf of Durmazlar, ready to provide expert advice and support when it comes to sheet metal machinery. Our demonstration center gives you the opportunity to get a hands-on look at our machines, experience firsthand the quality and precision technology of our products, and receive the best possible consultation tailored to your business goals. Our mission is to be your local direct partner and to offer you comprehensive services including training and customer support. We are happy to support you directly from Germany—from consultation and purchase to the entire service life of your machine. With our German branch, we are always locally available to respond quickly and efficiently whenever you need us. Here we are your reliable partner for advanced technological solutions in sheet metal processing.

Tahun pembuatan: 2024, Kondisi: seperti baru (mesin pameran), Bending force: 2,200 kN Bending length: 3,050 mm Clearance between uprights (mm): 2,600 mm Stroke length (mm): 265 mm Throat depth: 410 mm Installation height: 530 mm Y-axis operating speed (mm/sec): 10 mm/sec Motor power: 18.5 kW X-axis operating speed (mm/sec): 500 mm/sec Backgauge stroke (motorized): 350 mm Length: 4,250 mm Width: 1,700 mm Height: 2,750 mm Weight: 11,500 kg Tjdpjd R Elcsfx Af Sjd Standard equipment: Y1, Y2, pressure beam axes (individually controllable) X and R axes CNC controlled Control unit: ModEva 19T Backgauge with servo motor & linear guide ball screw system (X-R) (AL) CNC-controlled crowning European tool clamping system Movable support arms (with T-slot and stoppers) Specially designed hydraulic block and valves engineered to global standards Electrical equipment compliant with international standards Optional accessories: Top bending tool H=66.5 (one of them segmented) Bottom bending die 4V (one of them segmented) D-Bend 3D CAD/CAM import & simulation software The machine can be inspected and demonstrated at our demo center in Staufenberg by prior arrangement at any time. Additional machines are available for demonstration at our facility in Staufenberg. Further information is available upon request.

Tahun pembuatan: 2024, Kondisi: baru, Manufacturer: DURMA Model: MS 3004 Tjdpfx Aed R Emfsf Sjd Year of manufacture: 2024 Cutting length: 3100 mm Sheet thickness: 4 mm Control unit: EZM9910 Operating hours: 0 Cutting angle: 1°30′ Strokes per minute: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions (LxWxH): 3700x2300x1350 mm Weight: 3780 kg Standard Equipment: - EZM9910 control unit - Backgauge range of 750 mm programmable via control unit - Plastic inserts for hold-down devices - 1 side stop and 2 sheet support arms - Finger guard - Portable foot switch with emergency stop - Spring-loaded adjustable stop in T-slot of support arms - Ball screw - Table plates with ball transfers - Upper blade with 2 cutting edges - Lower blade with 4 cutting edges - CE marking Extended Equipment: - Adjustable angle stop 0-180° The machine can be inspected and demonstrated at our showroom in Staufenberg by appointment at any time. Further machines are available for demonstration at our Staufenberg location. Further information available upon request.

Tahun pembuatan: 2024, Kondisi: baru, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical Data: AD-R 60400 Bending force: 400 tons Bending length: 6050 mm Distance between uprights: 5100 mm Tjdpfx Afsfin Hwe Sed Stroke: 365 mm Installation height: 630 mm Throat depth: 510 mm Optional throat depth: 750 mm | 1000 mm | 1250 mm Table height: 1220 mm Table width: 154 mm Y rapid traverse: 120 mm/sec Y working speed: 8 mm/sec Y return speed: 100 mm/sec X axis working speed: 250 mm/sec R axis working speed: 140 mm/sec R axis travel: 250 mm Motor power: 37 kW Length: 7500 mm Width: 2110 mm Height: 3710 mm Weight approx. 35 tons With over 60 years of experience in research and the manufacture of sheet metal processing machines, with 8,000 machines manufactured annually in three technologically advanced production facilities over a total area of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally renowned manufacturers in the industry, with products distributed in 120 countries worldwide. With our subsidiary in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here we are your direct contact from within the ranks of Durmazlar, providing you with expert advice and support when it comes to sheet metal processing machinery. Our demonstration center gives you the opportunity to experience our machines firsthand, to be convinced by the quality and precision technology of our products, and to receive the best possible consultation tailored to your business objectives. Our task is to be your direct local contact and to offer you service solutions including training and after-sales support on site. We are pleased to accompany you from Germany – from the initial consultation, through purchase, and throughout the entire service life of your machine. Thanks to our German branch, we are always local when you need us, so we can respond quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Tahun pembuatan: 2024, Kondisi: baru, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Tjdpfxsftdh Is Af Sod Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration site in Staufenberg. Further machines are available for demonstration at our facilities in Staufenberg. Further information is available upon request.

Tahun pembuatan: 2024, Kondisi: baru, Manufacturer: DURMA Model: AD-R 30220 Bending length: 3050 mm Press force: 2200 kN Control unit: CNC DT-10 Operating hours: 0 h Backgauge controlled axes: X, R Distance between uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Throat depth: 410 mm X-axis travel: 650 mm X-axis travel speed: 250 mm/s Approach speed: 140 mm/s Bending speed: 10 mm/s Return speed: 140 mm/s Dimensions (L/W/H): approx. 4250x1770x2900 mm Weight: approx. 12,250 kg Standard Features Y1, Y2, X = 650 mm Control unit: CNC DT-15 European tool clamping system 60 mm die holder (for European die system only) 2 front-support arms, linearly guided along the full length Motorized backgauge with linear guide and ballscrew spindle Height-adjustable backgauge fingers Backgauge servo motor Side safety covers CE marking Tjdpfxsd Srk Es Af Ssd Enhanced Features CE-compliant safety system with manual FIESSLER AKAS II M-FPSC-B-C and safety cover & switch Controlled axes: X, R axes, Z axes adjustable manually Quick-release clamping CNC-controlled motorized crowning The machine can be inspected and demonstrated at our showroom in Staufenberg by prior arrangement at any time. Additional machines are available for demonstration in Staufenberg. Further information available upon request.

Tahun pembuatan: 2024, Kondisi: baru, A new AD-R 37220 is being offered here: Bending force: 220 tons Tjdpfx Afed S I R Ts Sod Bending length: 3700 mm Distance between uprights: 3100 mm Stroke: 265 mm Installation height: 530 mm Throat depth: 410 mm Table height: 900 mm Table width: 104 mm Y-axis rapid traverse: 160 mm/sec Y-axis working speed: 10 mm/sec Y-axis return speed: 120 mm/sec X-axis working speed: 250 mm/sec R-axis working speed (manual): 250 mm/sec R-axis travel: 250 mm/sec X-axis distance: 650 mm Length: 4950 mm Width: 1770 mm Height: 2900 mm Total weight: 14,100 kg Options: - CE with manual F.AKAS II M - FPSC-B-C + safety cover & switch - R axis X=650mm X, R (AL) - European upper tool P97.75.R08 (one piece sectionalized) - European lower tool M.460R.85 (one piece sectionalized) - Quick-release clamping - CNC-controlled motorized crowning - Y1, Y2, X, R (4 axes) X=650mm X, R - Control unit - CNC DT-15 graphical control unit - European clamping system - 60 mm die holder (for European dies only) Throat depth 410 mm Backgauge: motorized, linear guide & ball screw system Backgauge fingers height-adjustable Backgauge motor: AC type Movable support arms with linear guides along the entire length The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Additional machines are available for demonstration at our Staufenberg location. Further information is available on request.

Tahun pembuatan: 2024, Kondisi: baru, We offer a tandem press brake tailored to your specific requirements. Everything can be configured according to your wishes; we guarantee very short production and delivery times. Further information is available upon request. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, a leading manufacturer exporting new, high-quality sheet metal processing machines worldwide. With its headquarters in Turkey, Durmazlar has established itself as one of the world’s largest manufacturers of sheet metal working machinery. With over 60 years of experience in research and production for sheet metal processing, and with 8,000 machines manufactured annually in three state-of-the-art production facilities totaling 150,000m², the Durmazlar Group and its DURMA machinery are renowned globally. Our products are sold in 120 countries. Located in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. We are your direct point of contact within Durmazlar, providing expert advice and support for all your sheet metal machinery requirements. Our demonstration center allows you to view our machines on site, experience their quality and precision technology firsthand, and receive the best possible consultation tailored to your company's objectives. Our mission is to be your local partner and ensure comprehensive services, including training and after-sales support. Tedpod Tpy Njfx Af Sjd From our German branch, we accompany you through the entire process — from consultation and purchase to the entire service life of your machine. We are always available locally to respond quickly and efficiently whenever you need us. We are your reliable partner for technologically advanced solutions in sheet metal processing.

Tahun pembuatan: 2024, jam operasional: 32 h, Kondisi: baru, DURMA Make Model: AD-S 30175 Year of manufacture: 2020* Bending length: 3,050 mm Pressing force: 1,750 kN Control unit: DELEM DA-66T Operating hours: 32 h Tedpjdx Nluefx Af Ssd Controlled axes backgauge: X, R, Z1, Z2, +Delta X +/- 125 mm CNC controlled Distance between uprights: 2,600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Throat depth: 410 mm Travel range X-axis: 650 mm Travel speed X-axis: 500 mm/s Travel range R-axis: 250 mm Approach speed: 160 mm/s Bending speed: 10 mm/s Return speed: 100 mm/s Dimensions (L/W/H): approx. 4,250 x 1,700 x 2,750 mm Weight: approx. 11,500 kg Standard equipment Y1, Y2, X, R – X = 650 mm Control unit: CNC Cybelec ModEva 19T – PC 1200 3D SW D-BEND 3D CAD/CAM import & simulation software CNC controlled motorised crowning European tool clamping system 60 mm die holder (only for European die system) Throat depth: 410 mm 2 front-mounted support arms with T-slot and tiltable stop Backgauge system: Siemens DC servo motorised, with linear guide and ball screw Protective covers CE marking Extended equipment Safety system CE-standard for EU: FIESSLER AKAS-3P motorised + FPSC (SAFETY PLC) Controlled axes backgauge: X, R, Z1, Z2, +Delta X +/- 125 mm CNC controlled Control unit: DELEM DA-66T Hydraulic upper tool clamping Wila NSCL-II-HC/UPB – PREMIUM – 250 t/m Hydraulic lower tool clamping Wila NSCR-II-HC-CNC/UPB – PREMIUM – 300 t/m Powerpack for hydraulic clamping AP3-AP4 bending support – motorised height adjustment – max. load capacity 125 kg per unit Oil cooler This machine is manufactured to customer specifications. Further machines available for demonstration at our premises in Staufenberg. Further information available upon request.

Tahun pembuatan: 2024, Kondisi: baru, The DA-69T control system offers both 2D and 3D programming, including automatic calculation of the bending sequence and collision detection. The complete 3D machine setup comprises multiple tool stations and provides instant feedback on the feasibility and handling of the product. DA-69T Features: • 3D and 2D graphical touchscreen programming operation • 3D visualization in simulation and production • 17” TFT color display with high resolution • Complete Windows application suite • Compatible with Delem Modusys (module scalability and adaptability) • USB and peripheral interface • Open system architecture • Sensor bending and correction interface • Profile-T3D offline software • Significant contribution to environmental protection; climate change and the greenhouse effect will thank us, as will future generations! • Fully electronic drive • Up to 30% higher productivity • Up to 50% energy savings thanks to start-stop technology • Faster than hydraulic press brakes • Lower operating costs • Significantly lower service and spare parts costs (electric press brakes are technically much simpler and almost maintenance-free) • No harmful oil • Quiet – efficient – independent of hydraulic oil – low-noise operation • Relaxed and stress-free bending • Full working area • Touchscreen operation Machine dimensions: (L x W x H): 2,150 mm x 1,650 mm x 2,800 mm Technical details: Bending length: 1,250 mm Clearance between uprights: 1,300 mm Press force: 400 kN (40 tons) Control: CNC ModEva 19T Backgauge axes controlled: X, R (Z optional) Stroke length: 200 mm Installation height: 440 mm Table width: 104 mm Table height: 1,000 mm Throat depth: 410 mm X-axis travel: 650 mm X-axis travel speed: 500 mm/s Approach speed (Y): 180 mm/s Bending speed (Y): 20 mm/s Working speed (R): 350 mm/s R-axis travel: 250 mm Motor power: 7.5 kW Weight: approx. 4,500 kg Standard features: Control: Cybelec ModEva 19T CNC-controlled crowning Upper tool clamping: Durma (European) Lower tool clamping: 60 mm holder Backgauge: AC servo motors with ball screw spindle Option includes: Fiesseler safety system AKAS II M FPSC-B-C Control: Delem DA 69T Tedpfx Afjd Sak Se Sjd CNC-controlled backgauge X, R, Z1, Z2 Hydraulic upper tool clamping Durma (Type Wila) Hydraulic lower tool clamping Durma (Type Wila) Hydraulic power pack for clamping D-Bend simulation software The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our location in Staufenberg. Further information available on request.

Kondisi: baru, Tahun pembuatan: 2024, Entdecken Sie die leistungsstarke Durma Abkantpresse in unserem Vorführzentrum in Saerbeck. Als Hersteller bieten wir Ihnen höchste Präzision und Effizienz mit einer Kapazität von 3050mm Länge und 175 Tonnen. Profitieren Sie von unserem umfassenden All-in-One-Service: Wir kümmern uns um Transport, Aufbau, Inbetriebnahme und bieten Ihnen eine einjährige Gewährleistung sowie schnellen und zuverlässigen Service. Besuchen Sie uns und überzeugen Sie sich selbst von der Qualität und Vielseitigkeit dieser erstklassigen Maschine. Standardausstattung - Kapazität (Länge x Presskraft): 3050 mm x 175 t - Einbauhöhe: 530 mm Tjdpfxottatbj Af Sod - Ausladung: 450 mm - Hub: 265 mm - Y1, Y2, X – 3 gesteuerte Achsen - Steuerung: DT 15 - Manuelles F. AKAS FPSC Sicherheits-Lichtvorhangsystem - CE-konformes F. AKAS BVLT Lichtgitter und Schutzkäfige (für Tandem-Abkantpressen) - Servomotorischer Hinteranschlag mit Linearführung und Kugelumlaufspindelsystem (Achse X) - Manuelle Bombierung - Werkzeugspannung im europäischen Stil - Verstellbare Vorderarme - Hydraulikblock und Ventile in Sonderausführung gemäß internationalen Standards - Elektrische Ausstattung nach internationalen Standards Ausgewählte Optionen - Steuerung: Delem 66S – NEUHEIT - Motorisierte Bombierung - X = 650 mm, X, R, Z1, Z2 (6-Achsen gesteuerte Abkantpresse) - Unterwerkzeug Europäisch M.460R.85 - Oberwerkzeug Europäisch P135.75.R08

Tahun pembuatan: 2024, Kondisi: seperti baru (mesin pameran), Hydraulic 3-Roll Bending Machine with Variable Axes HRB 3V by Durma Technical specifications: Bending length: 3,100 mm Bending capacity Ødx1.5: 51 mm Bending capacity Ødx5: 60 mm Pre-bending capacity Ødx1.5: 39 mm Tsdpfxod E Ib Ie Af Sjd Pre-bending capacity Ødx5: 35 mm Top roll diameter: 520 mm Bottom roll diameter: Side roll diameter: 470 mm Max. roll opening: Length: 6,600 mm Width: 2,250 mm Height: 2,670 mm Working height: 1,920 mm Weight: 40,500 kg Motor power: 45 kW + 18.5 kW Minimum additional top roll diameter: Oil tank capacity: 1,000 liters Additional machines are available for demonstration at our facility in Staufenberg. Further information available upon request.

Tahun pembuatan: 2024, Kondisi: baru, Maximum load capacity 5 tons Horizontal axis speed 250 mm/s Vertical axis operating speed 70 mm/s Vertical axis stroke 1100 mm/s Vertical axis approach speed 800 mm/s Sheet dimensions (depth x length) 3000 x 18200 mm Rack and pinion drive system for horizontal axis Hydraulic control for vertical axis Tedog Adnkspfx Af Ssd

Tahun pembuatan: 2024, Kondisi: baru, en-AD-S 40400 PRESS BRAKE Bending force (tons): 400 Bending length (mm): 4050 Distance between columns (mm): 3400 Y-axis rapid speed (mm/sec): 100 Tjdpjd Rlk Hjfx Af Sod Y-axis working speed (mm/sec): 8 Y-axis return speed (mm/sec): 80 Crowning: Motorized Daylight / Tool installation height (mm): 630 Table width (mm): 300 Table height (mm): 1040 Stroke (mm): 365 Throat depth (mm): 510 Support arms: 2 pcs Back gauge finger blocks: 2 pcs (standard) X-axis travel speed (mm/sec): 350 X-axis travel (mm): 750 R-axis max. speed (mm/sec): 300 R-axis travel (mm): 250 Motor power (kW): 37 Oil tank capacity (L): 450 Length (mm): 5750 Width (mm): 2110 Height (mm): 3540 Approx. weight (kg): 27,760 X = 650 mm X, R, Z1, Z2 / AL CE with manual F. Akas II M-FPSC-B-C (SAFETY PLC) Upper tool: Durma Lower tool: Durma Central lubrication: motorized Price is plus transport and commissioning We look forward to your enquiry.

Tahun pembuatan: 2024, Kondisi: baru, Power Guillotine Shear Technical Specifications Cutting Capacity: 2.5 mm Cutting Length: 2550 mm Cutting Angle: 1°40' Strokes per Minute: 35 1/sec Motor Power: 3 kW Backgauge Range: 550 mm Table Width: 400 mm Table Height: 850 mm Height: 1260 mm Width: 1350 mm Todpfehk Nf Rjx Af Sjd Length: 3100 mm Weight approx.: 1,540 kg

Kondisi: baru, Tahun pembuatan: 2025, The DURMA AD-S 611600 is a powerful hydraulic press brake that ensures maximum precision and efficiency in sheet metal processing. With a press force of 1,600 tons and a working length of 6 meters, it is ideally suited for demanding applications, particularly when working with large and thick materials. Todpfjvy Sraex Af Sod Technical specifications: - Model: DURMA AD-S 611600 - Press force: 1,600 tons - Working length: 6 meters - Condition: As-new, immediately available Features and benefits: - High bending accuracy thanks to state-of-the-art CNC control system - Robust construction for long service life - Versatility provided by the backgauge control - Integrated bending aid for supporting heavy and large sheets The machine is immediately available and can be inspected upon request. Please contact us for further information or to arrange an appointment.

Tahun pembuatan: 2024, Kondisi: baru, Brand: DURMA Model: AD-R 40400 Year of manufacture: NEW Bending length: 4,050 mm Clearance between uprights: 3,400 mm Stroke: 365 mm Installation height: 630 mm Throat depth: 510 mm Table height: 1,050 mm Table width: 154 mm Y-axis rapid traverse: 140 mm/sec Y-axis working speed: 8 mm/sec Y-axis return speed: 120 mm/sec X-axis working speed: 250 mm/sec R-axis travel: 250 mm Motor power: 37 kW Length: 5,750 mm Width: 2,110 mm Height: 3,540 mm Weight: approx. 25,000 kg Tedjd Hy Huspfx Af Sjd Standard Equipment Control: CNC Cybelec ModEva 19T CNC-controlled hydraulic crowning European tool clamping system / or, upon request, Durma clamping system Extended Equipment: CE-compliant safety system for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Backgauge controlled axes: X1, X2, R1, R2, Z1, Z2 Control: DELEM DA-66T Choice of Delem 66T – 69T or Durma control DAM – Durma angle measurement system Hydraulic top tool clamping Wila NSCL-I-HC/UPB – PRO – 180 t/m Hydraulic bottom tool clamping Wila NSCR-I-HC-CNC/UPB – PRO Hydraulic clamping powerpack D-BEND 3D CAD/CAM import and simulation software AP3 & AP4 bending aids 750 mm to 1,500 mm selectable Parking area for support arms (1,000 mm) TANDEM preparation Laser bending line Oil heater Central lubrication, manual or motorized Air conditioning for electrical cabinet Additional machines available for demonstration at our site in Staufenberg. Further information available upon request.

Tahun pembuatan: 2024, Kondisi: baru, YOU BUY DIRECTLY FROM THE MANUFACTURER Everything can be configured as desired, with very short production and delivery times. We are happy to provide further information upon request. Technical data available on request. Standard Equipment Y1, Y2, X, R – 4 axes Control unit – CNC DT 15 Servo motor for the backgauge & linear guide ball screw system (X-R) CNC crowning European-type tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves to global standards Electrical configuration according to global standards Optional Equipment CE Manual F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M motorized + FPSC (safety PLC) CE BLVT safety – only for tandem machines Z1, Z2 axes X1, X2 axes R1, R2 axes Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm – rear protection with light barrier AP3-AP4 bending aid Height-adjustable laser angle measuring system Quick clamping system Hydraulic and pneumatic tool clamping systems Upper and lower tools Lower tool positioning system Parking area Centralized lubrication system Oil cooler Additional backgauge fingers and additional movable support arms Special packaging for overseas transport Tjdpfsfirwmox Af Sed _____ With over 60 years of experience in R&D and manufacturing of sheet metal processing machinery, an annual output of 8,000 machines produced across three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally recognized manufacturers in their sector, exporting products to 120 countries. With our branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within Durmazlar, offering you expert advice and support for all matters relating to sheet metal processing machines. Our demonstration center allows you to gain an overview of our machines on site, experience firsthand the quality and precise technology of our products, and receive the best possible advice tailored to your company's needs. Our role is to serve as your direct contact person on site, offering comprehensive services including training and customer support. We are pleased to assist you from Germany – from consultation, through purchase, and throughout the entire lifecycle of your machine. With our German branch, we are always locally available when you need us, enabling us to respond quickly and efficiently. We are your reliable partner for technologically advanced solutions in sheet metal processing.

Tahun pembuatan: 2024, jam operasional: 33 h, Kondisi: baru, Machine dimensions: Todpfx Afjdx Nm Ts Sjd • (L x W x H): 4,250 mm x 1,700 mm x 2,750 mm Technical data: Bending length: 3,050 mm Clear distance between uprights: 2,600 mm Control system: CNC ModEva 19T Backgauge controlled axes: X, R (Z, optional) Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Frame throat depth: 410 mm X-axis travel range: 650 mm X-axis travel speed: 500 mm/s Approach speed (Y): 160 mm/s Bending speed (Y): 10 mm/s Working speed (R): 350 mm/s R-axis travel range: 250 mm Hydraulic oil capacity: 200 l Motor power: 18.5 kW Weight: approx. 10,500 kg Standard features: Control: Cybelec ModEva 19T CNC-controlled crowning Upper clamping system: Durma (European) Lower clamping system: 60 mm - bracket Backgauge: AC servo motors with recirculating ball screw Options included: Fiesseler AKAS II - FPSC-B-C safety system Gooseneck upper tool: P97.75.R08 (one in segmented version) Lower tool, multi-V die (die openings 16/22/35/50 mm) The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our site in Staufenberg. Additional information is available upon request.